How to outweigh the refrigerator door: step-by-step instructions for different brands

How to outweigh LG refrigerator door with control panel

New refrigerators are electronically controlled with a panel on the top door for added work. The upper part of the case is equipped with a protective, decorative cover, under which all the elements of the electrical wiring are hidden; it must be carefully removed. Likewise, the wiring is hidden in the top loop.

Now you need to disconnect the terminals, after which the door will calmly be removed. When you secure it on the opposite side, return all terminals to their places and close the covers. The whole process takes about half an hour, so you can easily hang the lg refrigerator door yourself.

In standard models of refrigerators, the door opens from the right side, but some manufacturers provide design features that allow you to move the door leaf to the opposite side. This makes it possible to make the model ergonomic and comfortable to use. You can do such manipulations yourself, having an elementary set of tools.

The activity of the left, not the right hand is a good reason for outweighing.
When choosing a model, we pay attention to the technical features, dimensions, ease of use, but we forget that the sash needs space.
Rearrangement in the kitchen associated with the repair or installation of a sink, washing machine.

outweighing the refrigerator doors
flat screwdriver and wrench
regular scotch
gloved

Use a screwdriver to remove the plugs from the bolts, disconnect the mount. To prevent the lower hinge from deforming, it should be held in place after detaching the mount.
Secure the door with tape before removing it. Thanks to this simple procedure, the door will not swing open and fall in the midst of the process.
The rotation axis mechanism is installed on the middle bracket

Take it out carefully.
Unscrew the bolts on the middle bracket. After removing it, detach the door from the bottom.
Remove the last bracket and install it mirrored from the opposite side, into the existing holes

If there are cover bolts, install them in the vacant space.
Next, change the handles. They are secured with screws. Often the fastening mechanism is hidden by a plug. Pry gently with a sharp object or miniature screwdriver. Be extremely careful, because the handles are made of plastic, using excessive force when screwing in - you can deform the material.
Move the stoppers to the other side (metal parts located at the ends, preventing strong opening of the doors).
Install in reverse order all parts on the other side. Fasten the brackets conscientiously, it is they that hold the entire weight of the doors with products.
Move the open door sensor if necessary.

In some situations, it may be necessary to re-hang the refrigerator door. In many models of refrigerating chambers, this cannot be done, which is better to know in advance. The whole process of work is easy to do on your own, you just have to figure out whether it is possible and how to outweigh the refrigerator door.

Installing the refrigerator door on the opposite side of the case is required for the following reasons:

Changing the interior in the kitchen. In the space occupied by the refrigerator in the new layout, there is no way to freely open the door.
The door does not close properly. In such a situation, it is required to rearrange the door faster, since warm air enters the refrigerating chamber through the gap between it and the body.As a result, the internal temperature rises and the compressor has to operate at double load in order to compensate for the temperature difference. With such processing, equipment will quickly fail. Sometimes it is not necessary to rearrange the door, it is enough to check the sealing gum.
If it is too worn out, dirty or deformed, then you must first replace it.
You are left-handed. Left-handed people are more comfortable opening the door on the right.

How to outweigh the door with your own hands?

If you have made the final decision to move the door of the refrigeration unit to the other side, some preparatory work should be done before starting the main process. In this case, we are talking about disconnecting from the power supply, dismantling all shelves, boxes and magnets, as you can see in the photo, as well as choosing a suitable screwdriver, wrenches and a knife. When everything is ready, you can start outweighing by following the step-by-step instructions:

First of all, it is necessary to find out whether the manufacturer has provided for the reinstallation of the door to the other side on your model of the refrigeration unit. It is quite simple to determine this. In models where the factory allows the door to be outweighed, special holes can be seen on the opposite side of the body and door.
When all doubts have dried up, you can proceed to dismantle the door. To do this, it is necessary to remove the corresponding fasteners from the unit, then, carefully holding the door, unscrew the screw. When this stage is completed, the door can be placed near the nearest wall, or simply placed on the floor.
Dismantle the pivot hinges on one side of the door one by one and install them on the other, closing the holes formed with decorative plugs. Experts strongly recommend rearranging the hinges only in a complete set, without changing their elements among themselves. The fact is that each loop already has a certain development, which means that if you rearrange small elements from one loop to another, you can achieve an extremely negative result.
When the hinges are reinstalled, the door can be hung in its rightful place and screwed to the refrigerator body using screws. First of all, the upper loop is fixed, and only then, the lower one. This approach will minimize the risk of damage. After fixing both hinges, it is necessary to adjust them.
The final step is reinstalling the doorknob.

Important to remember!

In order to reinstall the refrigerator door to the other side, without involving specialists, you should carefully study the manufacturer's instructions. The fact is that many models of refrigerators have a number of individual characteristics that require attention. For example, there are times when you have to rearrange the opening sensor to re-hang the door.

This indicates that you should check in advance for the presence of a corresponding hole on the opposite side of the door or enclosure. Among other things, for some models, rearrangement of the door requires the use of some additional elements, which, in most cases, are supplied in the kit.

As for models with an electronic display, such as in Atlant, Samsung, Indesit or Stinol refrigerators, here, it is best not to try to outweigh the door yourself, but to seek help from professionals. The fact is that when performing work, you will also need to overweight the control cable. If you do not have the appropriate skills, you can accidentally damage the cable, and this will definitely lead to extremely undesirable consequences and forced repairs.

In conclusion, experts give all newbies one simple piece of advice. When installing the door, tilt the refrigerator back slightly. The door closes on its own and can be adjusted much faster and easier.

It is important to take into account the fact that if you decided to independently move the refrigerator door from one side to the other, you automatically refused the warranty and service provided by the manufacturer.
If no difficulties frighten you, and you are ready to do all the work with your own hands, watch the training video and feel free to start hanging the door. It is rare that a house can be imagined without such a necessary unit as a refrigerator.

Today, the range of these devices is large enough and everyone can choose a refrigerator to their liking. The only drawback may be the inconvenient location of the door. Most often this direction is from left to right. If you need it the other way around, you will have to outweigh the refrigerator door yourself.

It is rare that a house can be imagined without such a necessary unit as a refrigerator. Today, the range of these devices is large enough and everyone can choose a refrigerator to their liking. The only drawback may be the inconvenient location of the door. Most often this direction is from left to right. If you need it the other way around, you will have to outweigh the refrigerator door yourself.

When it is necessary to outweigh the refrigerator door!

Most household refrigeration equipment is sold with a right-hand door opening system. And it's not just left-handers who are uncomfortable. Often the kitchen layout does not allow the use of a door that opens from left to right. There are certain problems that require you to outweigh the refrigerator door.

By the way, here are the most typical situations: small kitchen, no room to open doors; features of the layout of the premises; the user is left-handed; the installation of a sink, a washing machine to the left of the refrigerator is carried out; the door sagged, the hinges loosened and room air began to penetrate through the gap into the unit. In any of these situations, the right solution would be to call a specialist to outweigh the refrigerator door, the price of this process is low. Thanks to the service provided in a timely manner, the operation of the unit is improved and an ergonomic space is created in the kitchen.

Why you shouldn't solve the problem on your own.

If there is a need to reinstall the door of a two-compartment refrigerator, then the work is carried out alternately - in the refrigerating part, after which - in the freezing part. It is much more difficult to cope with such a situation in a single-chamber model. When there is a change in the position of the door, the doors protecting the freezer compartment must be replaced. The device of convex handles is of great difficulty. If the door is loose, it is not enough to simply move it to the other side.

This problem cannot be easily solved. Changing the side of the door opening in such a situation requires additional replacement of the seal along the entire contour. It is necessary to solve this problem in combination with the laying of a new seal. It is not difficult for the master to determine the state of the sealing rubber. If everything is in order with it, and the hinges are deformed, then changing the side to open the refrigerator will completely eliminate the problem.

If there is a desire, nevertheless, to independently engage in reinstalling the doors, then it is worth paying attention to whether there is such a possibility, whether the manufacturer has foreseen this process. You can understand this by the location of special holes that allow you to outweigh the doors.

They are usually closed with plugs. After making sure that they are available, you can prepare for work: disconnect the unit from the electrical network; free the shelves from products; remove all shelves; select the required size of a wrench, screwdriver. Using the tool, the door is dismantled: it is removed from the mount, the screws are unscrewed.

Why do you need to replace the doors

Right or left hand activity is a good enough reason to reset. The door leaf of the refrigerator, especially the voluminous one, designed for a sufficiently large load, is distinguished by a fair weight. It is not very convenient to constantly use the "wrong" hand to open and hold the sash. The second reason is much more common.

When choosing and buying a device, attention is paid to its technical characteristics and ease of use, as well as to its dimensions, but, as a rule, it is not taken into account that the swing sash will require space for opening. Renovation - a rearrangement in the kitchen caused by the installation of, for example, a sink or washing machine, required a relocation and a refrigerator

And, since the kitchen area is usually small, it turns out that the door does not open in the new place, and there is nowhere else to rearrange the refrigerator.

The difficulty can be resolved by reinstalling the sash.

How to replace the door in the refrigerator.

Before reinstalling, you need to make sure that it is possible: plugs should be placed on the body of the device and on the flap on the left side. Some models provide for the use of additional parts - in this case, they should be included in the kit.

How to properly replace the sash is usually described in detail in the manufacturer's instructions. But if it is lost due to the length of time, then you can use the general principles.

Before outweighing the door leaf, turn off the unit - it is recommended to completely de-energize it, remove shelves and containers, and dismantle the handle.

With a flat screwdriver, the caps are lifted and removed from the bolts.
The fasteners on the case are unscrewed. In this case, you should hold the sash so as not to damage the lower hinge. The photo shows the moment of dismantling the hinge.
The sash is lifted and removed from the lower hinge.
The pivoting hinges are removed. All existing plugs on the left side are installed on the right side in the attachment points.
If the model does not provide for the use of additional parts, then all removed hinges are mounted on the left side in a mirror image. It is recommended to start the installation from the top hinge.
In order to outweigh the door, install it in the lower hinge, and then bolt the upper one. The belt adjusts until a snug fit is achieved around the entire perimeter.

The video shows the reinstallation process in a single-compartment refrigerator in more detail.

How to outweigh the door: sequence of actions

First you need to de-energize the refrigeration equipment, for this it is enough to pull the cord out of the socket. After that, we remove all the magnets and decorations from the door, free the chambers from the food and defrost the freezer by pulling out all the shelves and drawers.

Instructions for a single-compartment refrigerator

After preparation, we proceed directly to the very removal of the door. First of all, you need to secure the door so as not to damage it when removing it. We do this with masking tape. Next, unscrew the bolts and plugs. This will remove the top mount. On some refrigerators, to get to the bolts, you must first remove the top cover.

The photo shows the bolts on the upper hinge, which we unscrew when removing the upper mount

The photo shows the bolts from the top hinge and the cover that happens on some models of refrigerators

Now you can remove the masking tape and remove the door. Place it on the floor, after placing an old blanket, a soft backing will protect the door from damage, especially if it is made of glass.

Now it's the turn of the plugs: using a screwdriver, move them from one side of the case to the other, into those slots that are already free

Pay attention to the fact that the fasteners are not swapped, otherwise everything will have to be redone.After that, you can outweigh the door to the place you need and move the handle if it is removable

Also check the tightness of the refrigerator. This can be done using an ordinary piece of paper: we clamp it between the door and the body and try to pull it out. If it was not possible to pull out the sheet, then everything was done correctly. But if the elastic does not fit snugly, then the refrigeration equipment will not be able to maintain the required temperature inside.

Instructions for a two-compartment refrigerator

Reversing the door of a modern two-compartment refrigerator is carried out in the same way, you just need to remove the doors from top to bottom one by one. And we collect everything in the opposite direction. So, the first thing to do is to secure both sashes again with masking tape. We immediately unscrew the bolts and remove the plugs on the other side of the door. Now we remove the door itself and carefully put it aside. We put the plugs in the holes from which the bolts were unscrewed. Next, we dismantle the middle mount - this must be done carefully, without damaging the door of the lower compartment.

The lower door can be removed in the same way - we also put it on a soft substrate. We repeat the operation with the bolts, twisting them in the opposite place. We return the door to its place and fix it with tape. To install the top door, you need to install the middle mount. After that, scotch tape is used: we fix the upper door, and the upper mount also returns to its place. The holes that we have freed up are closed with plugs.

Next, we check the tightness of pressing the doors to the refrigerator - they must close hermetically. We carry out the check, as described above, using a sheet of paper. If there is a tightness problem, the position of each door of the refrigeration door can be corrected by adjusting the awnings. If there are no problems and everything works, congratulations! You have succeeded, you can proceed to the next procedure.

The photo shows the middle hinge of the refrigerator

An example of a possible display on a refrigerator door

Required tools

The kit required to re-hang the refrigerator door includes several screwdrivers and wrenches. The type of tools required for this procedure depends on the design features of a particular model of household appliances. If work is carried out in relation to a single-compartment refrigerator, then the help of a second person will be required. In this case, you need to remove and put in a new place a large door, which is difficult to do alone.

Some models of refrigerators are equipped with a set of necessary tools. In addition, a number of manufacturers include this type of work in the warranty. In such cases, it is recommended to contact the service center to re-hang the refrigerator door.

Set of wrenches

The type of wrenches used in this procedure depends on the design of the appliance. In some cases, these tools are not applicable. However, open-end and socket keys are usually required to re-hang the doors.

Screwdriwer set

This procedure requires a Phillips or flathead screwdriver. The choice also depends on the model of household appliances.

Scotch

Masking tape is used to secure the door. Thanks to this, the part of the refrigerator will not fall during the dismantling work.

Instructions

It is not recommended to start dismantling without instructions. This document contains information about whether it is possible to carry out this procedure, about the design and other features of a particular model.

Why is this needed?

The need to rearrange the refrigerator door occurs in the following cases:

The kitchen is being renovated. After changing the interior, it is often necessary to install the refrigerator so that the door rests against the wall or adjacent drawers.
Door wear. This problem is typical mainly for old household appliances.If you do not rearrange the door or change the rubber gasket (depending on the cause of the malfunction), then hot air will constantly flow into the refrigerator compartment. Because of this, the load on the compressor will increase, which will ultimately lead to a breakdown of the part and, as a result, expensive repair of household appliances.
The owner of the refrigerator is left-handed. In this case, moving the door to the other side makes it easier to use household appliances.

> It is recommended to check the tightness of the door at regular intervals. To do this, just stick a piece of paper. The latter, in the case of a loose fit, freely comes out from under the door.

Despite the fact that this procedure should not cause any particular difficulties, it is not always possible to carry out such work. The latter is determined by the design features of a particular refrigerator model. In some cases, on the inside of the side walls, the manufacturer has provided holes for bolts that fix the door and handles. If the refrigerator has a different design, then the procedure under consideration cannot be carried out.

Why won't the refrigerator door close?

As you know, the refrigerator must be tightly closed. Otherwise, it will not work properly, and indeed it may break. What if his door won't close? What could be the reason? Let's look at everything in order.

There can be a lot of door faults: it does not close too tightly, creaks, twists or constantly opens. All of them lead to the fact that the products stop cooling, and condensation (frost) appears very quickly inside. Why do these things happen?

You open and close the door too often, slam it.
Do not wash the sealing rubber, and it becomes dirty, greasy, cracked.
Overload the refrigerator door.
The seal has worn out from old age and it's time to replace your refrigerator.

Now let's look at the problem from a more practical point of view, and try to figure out what to do so that the door still creeps in.

Banal reasons

First of all, you need to check if there is something large on the refrigerator shelf that prevents the door from closing tightly. If there are no visible obstructions, then it is necessary to inspect the sealing gum. Maybe it has hesitated somewhere, and you just need to straighten it.

Another reason that the door does not close well may be associated with an uneven floor, and as a result, the refrigerator tilted to the side.

Here you know what to do: twist the legs or substitute a piece of cardboard under one of the legs. Sometimes the refrigerator door gets twisted because it is overloaded with food inside. This also must be taken into account, and before calling the master, pull out all unnecessary, and try to tightly close the door.

Eliminate squeak

Overloading the door can cause it to squeak. But if the door racks are empty, then the reason the door squeaks is due to poor lubrication of the old hinges. The situation is corrected by lubricating the hinges. Here's how to do it.

Prepare engine oil in an oil can in advance. If there is no oiler, then you can draw it into a syringe.
Loosen the fastening screws and lift the door.
Put some oil on the axle.

If the door squeaks, then you can treat the hinges with a special universal lubricant in an aerosol. It's called WD-4 and is good at eliminating squeaking.

Elimination of skew

If there is a large gap, then try to eliminate it by adjusting the door. It happens that the bracket moves, the refrigerator door warps, and it does not close tightly. This should be done as follows.

First, they turn off the refrigerator and take out all the products from the shelves of the door. Then it is necessary to loosen the screw with which the upper hitch is fixed, remove one overlay, and then tighten the screw. You can also tighten the screw for the lower hinge of the refrigerator if the lower part is skewed.It is not necessary to unscrew anything too much, as this will lead to a complete imbalance.

Spacer worn out

One of the breakdowns is manifested in the fact that the door constantly opens, as if something pushes it away. This happens with very old appliances. They can be closed tightly, but for this you need to slightly raise the door. The reason it opens is a breakage of the spacer at the bottom. The plastic is worn out and should be replaced.

Old seal

The last option for the reason why the refrigerator door does not close is an old rubber band that no longer performs its functions. To make sure of this, you can shove a notebook sheet in the door and close it. In the place where the sheet will be poorly clamped, the refrigerator allows air to pass through. If there are several such places, then the gum (or the refrigerator itself) needs to be replaced.

There may be problems with the opening sensor, backlight and other electronic elements. You are unlikely to cope with such problems on your own, so it is better to call a master.

We advise you to read: how to outweigh the refrigerator door