How to increase the dress by 1 size?

When reworking a new dress that does not fit in size, it is first washed in order to work with the washed item and to be sure that it does not give additional shrinkage.

Share link:

Wool versatile ways to stretch shrunken dress

Put the dress in cool water and leave it on for 15-20 minutes. Then the product is washed in a washing machine with a gentle spin cycle. When wringing, the item will stretch slightly. After washing the dress, take out the clothes and continue to stretch with your hands. Then hang the garment on a padded hanger and leave to dry upright at room temperature. When drying, regularly straighten and stretch the fabric with your hands in the right direction;
Spread the material out on an ironing board and place a damp gauze or thin cotton cloth on top. Then iron the garment with an iron, while slightly stretching the garment with your hands. Remember that polyester and other synthetic fabrics and wool can only be ironed at low temperatures. It is better not to iron satin and lace items at all;
If you do not want to iron your clothes, apply steam treatment. Take a steam generator or an iron with a vertical steamer function. Hang the dress on a hanger and steam the garment at a distance of 15-20 centimeters on each side. Stretch the material in the desired directions while steaming. Be careful not to burn yourself !;
If you do not have a steam generator or iron with the corresponding function, select the traditional steaming method. Fill the tub with boiling water and hang the dress over the water.Leave the item in a closed bathroom for one to two hours, periodically pull the material in the desired areas

But at the same time it is important that the hem of the dress is located at some distance from the boiling water and is not immersed in water !;
Prepare a hydrogen peroxide solution. To do this, dilute two tablespoons of the product in ten liters of water.

Then rinse the shrunken dress in the composition. Stretch the material in the right places during the procedure. Leave the dress for two to three hours, then remove and lay to dry on a horizontal surface. Using the same method, you can stretch a white dress, only in this case it is soaked in milk;
Add three tablespoons of vinegar to cold water and rinse the dress there. Squeeze the garment lightly and hang it on a hanger with padded shoulders. While the garment dries, stretch the material with your hands in the right directions.

Additional tips and tricks

If there is a need to reduce the size of your favorite dress, then first of all you should pay attention to what material it is made of. Natural woolen items tend to shrink when washed in hot water, which can be used wisely

They are briefly soaked in water with a temperature of 50-80 ° C. In this case, you need to know that the higher the temperature, the more the size will decrease.

The dress will no longer stretch back, so such experiments are handled carefully.

The easiest way is to make a sleeveless garment. You can cope with such a task even without experience and special skills. If you want the dress to fit the figure, you will have to make darts in the necessary places (on the chest, waist, back). When it is required to transfer the side seam by a couple of centimeters, they do it in the armpit area, and to the very bottom they reduce the decrease to nothing.

The seam allowance for light and heavy fabrics is not the same. In the first case, it is 0.5-0.7 cm, and in the second - 1-1.5 cm. Do not allow the dress to fit too tightly around the figure, otherwise, over time, the fabric will tear, and the seams will diverge.

If you need to alter a dress with a lining that is not sewn to the bottom, then getting to the right seams will be very easy. In the stitched lining, you will have to make a move in order to be able to turn the entire product inside out. When reworking, be sure to take into account the fact that different fabrics lie on the body in different ways. The dress should not hinder movement or be tight. Otherwise, it risks breaking at the most inopportune moment.

In the case when it is required to shorten the length of the skirt, the first step is to try on and determine how it sits in the hips and waist. If everything is good in this regard, then there will be an order of magnitude less work. You just need to measure how many centimeters to shorten the bottom, sweep it and try again. After that, the excess fabric is cut off, and the seam is attached on a typewriter. In the second case, you will have to tear through the skirt in the belt, sew it in and shorten it to the required length. The fabric should not wrinkle or wrinkle.

If the dress is made of elastic fabric, then special threads should be used to alter it, which also tend to stretch. In this case, ordinary thread will lead to deformation of the product or to discomfort when using it. Ultimately, the dress can simply tear at the seams.

p> Share link:

Decrease after washing

This method is only suitable for natural woolen items. When exposed to high temperatures, they tend to sit down, that is, shrink. If the dress has lost its shape or stretched, it is recommended to soak it in water + 50-80 degrees. The hotter it is, the more it will shrink.

Wool after washing

It is worth remembering that the thing will not stretch back, so it is important to be careful. Better to wash by hand to control timely

Thus, the process of changing the size of your favorite dress after reading this article will not be so difficult for any girl or woman.

Shorten skirt

There are several ways to shorten the skirt, and they will depend on the style of the dress:

A trapezoid implies a uniform downward expansion. To shorten this style, you must first put on the product and mark the desired length of the skirt. From the marked line, you need to measure down 2-3 centimeters for allowances and make a basting or draw a line with chalk

You need to measure from the hem to the waist, but not vice versa! It is important to measure the same distance from all sides, and then cut off. Before overcasting, a new seam is made a small hem and bent

It is recommended to sew after a control check.
The straight skirt is much easier to shorten than other models. Even a beginner can cope with this task. The product must be folded at the seams and smoothed out on a hard, even surface. Further from bottom to top (to the desired length), notes are made on the right and left with chalk. Then the lines are connected, a straight line is drawn, which will be parallel to the bottom. It remains only to cut off the free edge evenly, hem and stitch. It is important not to forget to iron the seam so that it is not noticeable.
Pleated skirt. Before stitching or shortening a pleated garment, wash it and let it hang on a hanger for a few days. At home, it is easier to shorten such a skirt from the top than from the bottom. First, the skirt from the bodice and the belt are stripped off, therefore the extra centimeters are removed, and then the belt is sewn into place. In the conditions of the atelier, it is done differently. The folds are leveled by a special sender, cut to length, like a trapezoid or sun flare, and then corrugated back.

Pleated skirt

Tips & Tricks

Before you get down to business, read the rules that will help you embroider your dress neatly and competently:

• If the dress has not yet been worn or has only been worn a couple of times, then the simplest solution is to open the side seams and reduce the allowance (of course, if its size allows it to be done). This way, the outfit can be increased by the whole size, and no one will even notice anything.
• When choosing the size of the insert, keep in mind that a certain amount of material will go into the seam, for the allowance. Don't make the outfit too tight - you should be comfortable moving around. To expand a thing by 1 cm, you need a 5 cm tissue flap, 2 cm - 6 cm, etc.
• Before sewing in, the material must be washed and ironed so that it takes on its true size and does not sit in the finished product, spoiling its appearance.
• If the sewn fabric contrasts with the dress itself, then you can add similar decorative elements to the sleeves and neckline to make everything look harmonious.
• If only one specific place (chest or thighs) does not fit in size, then it is permissible to make inserts only in this area. But when the waist is narrow, you have to alter the whole outfit.

In the atelier

The need to take a sundress or dress in the atelier appears if you can't do it yourself or don't have a typewriter. It is also better to trust the master if the dress is of a complex cut, or you need to change it by 3-4-5 sizes (then only a professional will be able to reshape it).

It is also important to remember that there is a certain specificity of working with elastic fabrics. When stitching, they can shrink or deform and, in order not to spoil the product, it is better to trust the seamstress

If the dress has a complex pattern and many elements, then it will be difficult to reduce its size on your own. In this case, it is better to hand over a dress for a girl or a woman in an atelier, experienced seamstresses will do it efficiently. Evaluate the rationality of your choice, this option does not always justify itself economically. It should be remembered that different fabrics used for sewing dresses have different quality characteristics, for example, linen and knitwear.They stretch and lay down in different ways, this should be taken into account when reworking finished products.

Shoes-cats

We have to:

• ballet flats (preferably plain with a round toe and plenty of front space)
• black paint (acrylic), black marker
• tassels
• masking tape
• white paint and white marker

First, we glue the shoes with tape, strong enough so that the paint does not seep.

We paint the socks with black paint to get an even color, without light gaps. When the paint is dry, remove the tape and draw small triangles for the ears. You can also use masking tape for this if your hand is not very straight.

To draw the eyes, use white paint, a marker or corrector. With his help, draw a thin mustache and nose.

And voila! The latest fashion trend has appeared in our wardrobe!

How to add length to a short wedding dress?

Wedding dresses are a separate topic. As statistics show, a good half of the brides, on the eve of the wedding, look at their dress with eyes full of disappointment.
... A wedding dress that is too short can be improved in a matter of minutes by yourself.

To do this, add a translucent case, sew a train or make a delicate frill from light lace.
We are sure that such a gentle and sensual image will definitely please the groom.

Everyone thinks that creating real masterpieces is difficult and costly, both in terms of time and money. But, everything is exactly the opposite. It is not only easy and simple, but also very interesting. After all, such a dress as yours, for sure, and who will not!

A waist that is naturally too thin is a rare phenomenon. Fortunately,
today there are a variety of corrective techniques,
with the help of which it will not be difficult to visually draw it. Let's figure it out
which will help emphasize the curves of the female body.

A-line skirt

A skirt of this cut
At first,
hides the hips,
and secondly,
makes the waist thinner and more expressive. Just look
how great is she "
works ”for Chloe Moretz, the owner of a rectangular figure. Take note of models with a fit clearly at the waist,
flared at the bottom.

Wrap dress

The ideal solution for the visual correction of any type of figure. The wrap dress accentuates the bust area,
reduces waist size and forms ideal proportions.

Basque

This decorative element is able to emphasize the curves of the body,
making the figure more feminine and expressive

The peplum not only visually narrows the waist,
but also distracts attention from large hips,
and also hides the belly. Top,
the dress,
skirt or belt - your choice

High waistline

Skirts,
pants,
shorts,
bermuda shorts,
High-rise jeans look great with a tucked-in top. This gives lightness to the figure and creates the feeling of a narrow waist. Another cool way is to tuck your blouse or jumper in the front only,
releasing the fabric on the sides and back.

Cropped top

It could be a crop top
jacket,
jumper or any other option of your choice

The cropped top is perfect "
cuts through the waist,
focusing on it

For this method to work,
it is important to combine the top with skirts or high-rise pants

Belt / Belt

This technique will help not only to emphasize the waist,
but also divide the figure in the correct proportion. Holders of large forms are more suitable for wide models of belts,
and for fragile girls - medium and thin. Recently, designers have suggested wearing belts on literally all wardrobe items: from dresses to outerwear.

Fitted silhouette

Take note of another tricky trick: you need to add volume to the shoulders and hips,
so that in contrast to them, the waist looks slimmer. For example,
a fitted jacket with a clear shoulder line or a dress with a fluffy skirt and a voluminous top.

Color block

Playing with color is a whole architecture in the fashion world. Waist can literally "
draw "using the right cut and combination of shades. For example,
dress with dark inserts on the sides,
visually stretches the silhouette and highlights the waist,
making it thinner.

Shades of different color groups can visually shorten the legs or add volume to the waist area,
shades of the same color group act in exactly the opposite way and give the effect of harmony.

Color contrast is acceptable
if the transition is in the belt area. For example,
classic scheme "
light top - dark bottom ”will perfectly accentuate the waist.

Playing with prints

How to create a waist using visual illusions
without changing the silhouette. You should be careful with horizontal stripes and large peas,
but with vertical and diagonal stripes you will definitely not go wrong. You don't have to buy a completely striped thing,
a couple of contrasting vertical stripes are enough.

How to alter the dress?

To alter a dress at home, you need to follow the following algorithm of actions:

1. We strip off the neckline and hem. We act carefully so as not to damage the fabric. We carefully remove all the remaining strings.
2. Steam the dress to smooth out the creases.
3. We align the product so that all seams and darts match. We attach safety pins to the seams, piercing through two layers of fabric so that they do not move relative to each other.
4. We mark with chalk and pins a half-piece.
5. If you plan to insert only one strip of fabric, then cut the shelf along the marked line of the half-line. If there are two inserts, then it will be necessary to cut off both shelves, retreating a small distance from the marking.
6. Now we will focus on the collar and chest area. To approximately calculate the solution of the neck tuck, you need to subtract 1/3 of its width from the total width of the insert. We mark the wedge-shaped insert, considering that it should end a couple of centimeters above the chest line.
7. Having made the markup and connecting all the elements with pins, we try on the dress. If everything fits, then you can cut off the excess material. We do this only after trying on, so that we can fix everything.
8. We sew all the inserts on the hands or using a sewing machine, iron the seams, put the collar and the lower part in order.

As you can see, expanding the dress yourself is not so difficult for someone with some sewing experience. If you have never held a needle in your hands, then it is better not to tempt fate: find out how much such a service costs in the atelier, and trust the professionals.

How to expand the dress in the chest with your own hands

How to increase the size of the dress at home
How to increase a dress in size with your own hands

• A fabric that is as similar as possible to the material of the dress or in a contrasting color.
• Scissors.
• Edging for processing if you want to emphasize the line of the yoke.

How to expand the dress in the chest with your own hands

How to alter a dress if it is small

Modeling a dress for the "Inverted triangle" body type

Your strong point is narrow hips and long, slender legs. We focus on them. All decor, bright prints - down to the skirt. Reducing the width of the shoulders, here raglan sleeves will help us, or the absence of sleeves at all in summer clothes, a dress with a strap on one shoulder, a Greek silhouette, a loose tunic, a dress with a tulip skirt can become a lifesaver and be loved in your wardrobe. You can afford to wear fluffy wide skirts, skirts or trousers with a peplum, straight cut dresses, but not too voluminous and wide, with vertical seams or trim.

As an example, we will analyze the modeling of a pattern of a simple dress suitable for this type of figure. The model has a fitted sleeveless bodice and a tulip skirt that adds volume to the hips. The dress is cut-off along the waist line, there are two opposite folds on the front panel of the skirt, a slit is made on the back panel of the skirt.

We start modeling by applying to the details of the back and shelf.
relief lines (if you want a greater fit or the fabric is knitted, you can use the base pattern of the adjacent silhouette). We will arrange the thallium darts on the front panel of the skirt into folds - cut the skirt part from the end of the darts vertically downward, move the parts apart so that in the upper part we obtain a solution approximately equal to 6-8 cm to form deep counter folds. At the bottom, we will keep the volume of the skirt in its original form.

Modeling a dress for the "Hourglass" figure type

The "hourglass" type of figure is the most feminine, it is he who is rightfully considered a standard for imitation and we try to bring our figure closer to it, at least with the help of clothes. Lucky women with this type of physique. The main advice is to focus on the waist, so you will further emphasize your femininity and sexuality. Neckline, bows, pencil skirts, stilettos are your win-win look.

Let's simulate such a simple dress, in two versions.

The model is quite simple at first glance, but with the right choice of fabric and accessories, it is very effective.
For modeling we need
and
... Cut-off dress along the waist line, the skirt is widened to the bottom. The darts for fitting the chest are transferred into the neckline: in the first version, the darts from the neck are stitched with an allowance outward, a small sleeve with a fold, in the second version, the darts on the chest are distributed in folds extending from the neckline, there are no sleeves.

Modeling. 1 step - on the details of the back, the dart for the roundness of the shoulder can be neglected, because the neckline of the back is deep enough and widened, but the size of the solution must be removed from the length of the shoulder so as not to upset the balance. For the convenience of modeling, we will transfer the dart on the shelf to the armhole. Cut the details of the skirt pattern lengthwise from the darts down.

Next, step 2 of the simulation. Draw a new line for the neckline according to the sketch. We will transfer the tallium dart on the shelf to the neckline, we will also transfer the dart from the armhole there. Read more about translation of darts. When designing a detachable adjacent silhouette, the pattern of the part of the shelf must be lowered in the waist area by 1 cm, this will give a better fit and prevent it from jerking when finished. Skirt. We connect the parts of the pattern obtained after cutting the details of the skirt, so that the darts open to the bottom. Correct the side cuts and the bottom of the product.

Sleeve modeling. The pattern of the base of the sleeve can be taken on ours. First, let's shorten the length to the required one. With the help of vertical cuts going from the ridge to the bottom of the part, and the subsequent spreading of the parts of the pattern, design the opposite fold.

More sleeve modeling can be found in this

In the second version of the dress, the darts on the shelf are translated into folds extending from the neckline. We will consider modeling below.

What to do if the dress is too small

How do I make it one size larger? The first thing that comes to mind in this case is to urgently lose weight. But this option is not always successful and easy to implement, so it's better to turn to the second one right away - to embroider a narrow dress.

In this case, further actions depend on the design of the product itself: the more seams and reliefs, the easier it is to alter a small dress and adjust it to the desired size.

Tips from tailors atelier

Consider the advice of experienced tailors before starting work and altering a tight dress. In particular, such:

1. Wash and iron the new fabric before using it. This will help to avoid shrinkage of the product in the future and not spoil the finished outfit.
2. If the item is new and a little too small, you can just gently open the seams and reduce the allowances. This option may seem ineffective as it only adds a few millimeters to the item on each side. However, in practice, it allows you to make an outfit much more spacious.
3. If the dress needs to be lengthened a little, then you can sew a small belt in the waist area. A frill sewn from below, a gupure, a contrasting insert or a fringe, depending on the style and style of the outfit, will also look neat.
4. If the outfit has become cramped in a certain place, then first you need to think about how to work in the problem area. For example, it is often necessary to embroider the hips, shoulders or back.

Attention! Silk, linen, polyester, thin jersey do not lend themselves well to re-stitching in the same areas: holes may appear on the seams or loops may come down. Therefore, be careful with products from the materials mentioned .. If, considering options for how to make a thing one size larger, you doubt your abilities - feel free to carry the product in the atelier

An experienced craftsman will do the work at the highest level, taking into account all your wishes!

If, considering options for how to make a thing one size larger, you doubt your abilities, feel free to carry the product to the atelier. An experienced craftsman will do the work at the highest level, taking into account all your wishes!

Fitting the outfit to the figure

It is good if the product needs to be enlarged in one problem area. The most difficult situation arises when the dress needs to be expanded at the waist - then it must be completely altered.

If the outfit is tight only in the hips or sleeves, then you should look for information yourself on how to redo the thing. It is not difficult at all and does not take much time. Depending on the location of the problem, you need to choose an action plan:

• On the sides. This is the simplest option - quite neatly rip the thing along the side seams, remove excess threads and sew in some fabric prepared in advance, gupur, wedges. • In the chest. It is enough to add small inserts of fabric in the front • In the bust. If the item is small in the specified area, then the best option would be to make a larger neckline or add ribbons, lace. • In the back. Here there is one option - to open the thing and make inserts in the back area. • In length. Perhaps this is the simplest case - you just need to add a wide ribbon at the bottom or pick up an insert from a similar fabric. You can add a ruffle to make the garment more elegant. • In width. If the product has a straight cut, then you can make an insert in the front, back or on the sides.