How to iron a pleated skirt

What is not recommended when ironing pleated chiffon items

To make a pleated item look beautiful, you need to remember which methods are unacceptable when ironing a chiffon product:

when rinsing pleated clothes, do not use strong efforts;
do not use the spin;
it is possible to resort to the help of steam only in certain cases, taking into account the composition and quality of the fabric;
before you start ironing the pleated, carefully read the tag on the clothes;
moisten a dry thing with a damp cloth;
the pleated outfit can be gently ironed, but not rubbed with an iron;
do not dry chiffon material on batteries or in the hot sun.

Wearing pleated garments with perfectly ironed folds, you will always look stylish, fashionable and simply at your best. Taking proper care of their belongings, they are able to last much longer!

How to iron pleated pleats

Set the temperature on the iron, based on the information on the label.
Iron the item slightly damp. You don't need to dry it completely.
Do not remove the basting before ironing. This will preserve all the wrinkles and even secure them.
Use an iron.

The wrinkles will straighten out and you may not need to iron.

Jersey

The corrugated jersey is ironed using two ironers (top and bottom).
Processing begins from the seamy side.
The iron is not applied to the surface of the fabric, but lightly touches it. The process resembles steaming at a low temperature.
First, the lining fabric is processed, then the belt, side seams and the bottom line.
Next, you can iron the pleated pleated by turning it over to the front side.

Silk

The corrugated silk product should be ironed semi-dry from the seamy side. No need to moisturize, as streaks may remain. You need to start processing with a belt and seams.

If the skirt is still dry, then moisten it completely, dry it a little, and only then start ironing.

Washing Methods for Pleated Skirt

If your favorite thing gets dirty, then you need to put it in order. Before washing your skirt, prepare it for the procedure:

Place the pleated garment in a nylon stocking before washing. It should remain in this state during washing and drying.
Before washing, the garment is stitched with wide free stitches in order to preserve the "accordion". For this, it is recommended to use white threads, which will not stain the fabric during washing. Folds can be sewn using different methods. Pleating is stitched parallel to the hem or each separately along the length of the skirt. Some housewives advise making wide stitches in the middle, and small ones below.

It is strongly not recommended to tighten the thread, the stitches should be free. Otherwise, the fabric in the folds is deformed. The last method is the most difficult, but reliable. After this preparation, the item can be washed and ironed.

Washing methods for pleated garments:

1. This washing option is the simplest, but it is suitable for those housewives who know the chemical composition of the impregnation and are sure that the folds will not be smoothed out. In this case, wash the pleated skirt in a washing machine at a temperature range of 30 to 35 °. It is recommended to select the delicate mode without spinning.

After washing, the skirt is rolled up into a tube and tied with a ribbon around the waist. Make sure that the folds hang loosely. Before drying, the item is hung by a tape.

2. You can wash the product with your hands. In this case, use water not higher than 35 °. It is forbidden to rub or wring out the thing during washing.

3. The skirt is twisted into a tube along the length (but not tight), placed in a nylon stocking. This is followed by hand or machine wash.Do not wring out the product while rinsing. Dry the thing without taking it out of the stocking.

4. Before washing, the pleated skirt is sent to a bag for washing delicate items. It is not recommended to fold or stuff the item, roll it into a tube and place it in a bag.

So that the skirt does not lose its lightness, it is rinsed using an air conditioner. This product will also facilitate further ironing, in addition, after use, the material does not electrify.

Care advice

So, when you have already acquired the coveted folded thing that has long attracted you in the window of a fashion boutique, brought it home, the question arose: how to properly care for it.

Perhaps someone would come up with the idea to give preference to professionals and entrust the thing to the dry cleaning staff. But this is extremely impractical, it takes time for waiting and delivery, it is not profitable financially.

You should familiarize yourself with the basic rules of home care and start caring for your pleated skirt yourself.

To begin with, pleating requires special storage. You cannot store pleated clothes in a closet on a shelf. It is best to hang it neatly on a trempel, smoothing out the wrinkles.

The skirt should be machine washed in a special fabric or mesh bag, folded as neatly as possible - fold to fold. If there is no such bag in the arsenal, take a regular nylon stocking. Washing in this form will protect the product from excessive wrinkles.

Use detergents and rinses in accordance with the requirements and quality of the material from which the product is made. Adding softener to the wash will make it easier to iron the skirt further.

To understand the question of how to iron a pleated skirt, you should also refer to the features of the fabric. For some materials, ironing is not allowed at all. Then, after washing without spinning, hang the product on a hanger at room temperature, having previously shaken off and smoothed all the folds with your hands.

Preparing pleats before ironing

Firstly, any pleated product must be prepared before ironing. And no matter how strange it may be, preparation begins from the beginning of the wash. There are a number of rules that prevent damage to clothing and keep it looking:

The washing mode should be extremely gentle. This is a delicate mode, manual or a cycle for silk or satin. Never wash your pleated garment on intensive modes, which can harm the folds and leave numerous creases and folds on them.
It is advisable to use fabric softener that will soften the material and prevent wrinkles from warping. And then ironing will be much easier.
To prevent the skirt from losing its shape, if possible, try to wash it in a special laundry bag.

How to repair corrugated folds

If the shirred effect has disappeared due to improper washing or ironing, you can restore it by applying soap. From the inside, they smear the folds with a piece of soap, fold the folds with each other, pass through them with an iron, pressing them strongly.

You can also restore folds in the following way. Laundry soap is grated, shavings are diluted in warm water, egg white, a little starch, a spoonful of vinegar are poured. This solution is moistened with cloth or gauze. The skirt is ironed through it. It should be borne in mind that due to protein, the material can stick to the iron - it is better to put a large sheet of paper on top.

Pleated or pleated skirt will look flawless with proper care.

It is recommended to iron the pleated skirt through gauze. After the procedure, the intended threads can be removed. If the iron has a steaming mode, ironing the skirt is much easier. It is enough to hang it on a hanger, straighten the folds, bring the switched on steamer to them. Before that, you need to make sure that the procedure does not harm by reading the label.

There are pleated skirts that cannot be ironed.For them, pleating should be done by hand. In this case, the thing cannot be stretched, otherwise, after drying, it will lose its aesthetic appearance. You can buy a special liquid that is used to treat the fabric. It retains the shape of the product for a long time.

So that the thing does not wrinkle after ironing, it should be stored in the closet only on a trempel, making sure that the folds are smoothed out. Drying it with clothespins is not recommended - traces will remain.

We arm ourselves with an iron

Did you wash your skirt with swept pleats? Do not rush to remove the threads, let the product dry in the same way. Keep the fabric slightly damp for easier ironing.

If the folds were swept over before washing, they should not be removed before the ironing process is completed.

The iron heating mode is set to 1 or 2 positions, depending on the instructions indicated on the product label. There are general rules, following which you can iron a pleated skirt without any problems:

It is advisable to use steaming to process the smallest parts, but before the procedure you need to familiarize yourself with the label. The skirt is placed on a special hanger, the folds are neatly straightened, after which an iron is brought to the product with the steamer turned on. It is recommended to iron the pleats made of silk and synthetic material from the inside out through gauze, if necessary. Usually silk pleated pleats do not wrinkle, which is considered its "highlight". Do not use a spray bottle, as water droplets will remain on the dried fabric on the folds. The chiffon skirt must be ironed through cheesecloth folded in 2-3 layers, which must be constantly moistened with cold water

One careless movement - and the thing will lose its shape. After finishing ironing, the basting seams are carefully removed

If the pleated skirt after purchase has a rumpled appearance, you can do without an iron. To do this, steam should be allowed into the bathroom by turning off the hot water for a few minutes and closing the door. Hang the skirt on a hanger for 15 minutes higher, then shake it thoroughly - and the folds will straighten.

How to iron pleated pleats

In order to properly smooth the pleated pleats, it is advised to pay attention directly to the fabric from which the skirt is made. Based on this, the temperature regime of the iron is also chosen.

It is advised to iron the pleated skirt in a slightly damp state. In this case, the basting should not be removed. A silk pleated skirt is rarely ironed. The fact that silk fabrics, natural and artificial, practically do not wrinkle, is precisely their specificity. But if there is a need, then you need to iron a silk product very carefully, because this fabric is very delicate and with one careless movement you can ruin the whole thing.

Pleated silk knitwear should only be ironed from the inside out, using an additional layer of fabric. It is categorically impossible to wet the fabric, because this is unlikely to help the ironing process, but dark spots on the fabric may remain, this will negatively affect the entire appearance of the product. Ironing a pleated skirt made of ordinary knitwear will more closely resemble steaming than ironing itself. For ironing, you must use a double layer of thin fabric or one layer of a thicker one. Any pleated products must be ironed only through an additional layer of fabric, regardless of the strength of their original material.

After ironing, you can gently remove the basting that held the folds of the garment together. It is also worth noting that after proper drying of the pleated product in a stocking or a special bag for linen, ironing may not be necessary at all. In order to give your new skirt a fresh and amazing look, you can do the following procedure. Shake your recently purchased skirt well to smooth out any wrinkles in the air. Do you want to make the skirt fluffy, and the folds themselves - even?

This tip is useful for women who are wondering how to smooth a pleated skirt. Of course, if you have a steamer, use it. The effect will be even better than from a steam room, and much less effort is required.

Can the pleated skirt be washed

A pleated skirt, or corrugation, is very popular in women's wardrobe, it looks beautiful, visually lengthens the legs, and has a slimming effect. At the same time, you need to take care of the pleats very carefully so that the frequent folds on the fabric do not lose their shape.

Like any clothing, the skirt needs to be washed from time to time. It is not at all necessary to carry pleats to dry cleaning, but when carrying out a home wash, you need to remember a few rules:

Pleated items are sewn from cotton and polyester, chiffon and silk, satin, wool and even leatherette. Each of the materials has its own requirements, so before you wash your clothes, you need to study the label.
Frequent pleats on the skirt are its main feature. Therefore, the main task during processing is to preserve the appearance of the corrugation. In the process of washing, the product must absolutely not be crumpled, twisted and roughly squeezed, otherwise the folds will be deformed.
It is advised to wash a pleated skirt, regardless of the material, in a delicate mode. If there is strong dirt on the product, then during a gentle machine or hand wash, they may not come off. Removing stains should be done separately, pre-treat them with laundry soap, soda solution or hydrogen peroxide.

For most skirts with corrugation, proper washing is quite safe.

Before you wash your pleated pleats, you can do a little test. The corrugated section of the product in the lower part of the skirt is moistened with water and it is seen whether the folds retain their shape. If the corrugation instantly straightens, then washing the product will be very risky; if possible, it is better to dry it or take it to a dry cleaner.

How and how not to wash a pleated skirt at home

Check the information on the product label. Most often, manufacturers recommend hand washing.

Consider the properties of the fabric:

Synthetic can be washed in any way, without worrying that the folds will part.
Natural must be placed in a nylon stocking before washing. In it, the skirt can be washed by hand and in the washing machine on a delicate cycle, and then dried.

There is also a way to keep pleating. More time consuming but reliable.

Sew the folds with large, loose stitches before washing. Use the same color of thread as the fabric to avoid staining. You can sew either along the hem, grabbing each fold, or from top to bottom parallel to each fold.

If there is strong dirt, they can be treated with a stain remover, having previously tested its effect on an inconspicuous area.

Washer

Place the skirt in a delicate wash bag, straightening any creases.
Send to the washing machine.
Add fabric softener with the detergent to soften the fabric and make ironing easier.
Turn on the delicate mode, turn off the spin.
After washing, remove the item from the bag, hang it on a hanger so that the water glass.
Hang dry.

Manually

Soak your pleated skirt in warm water and detergent.
Change water, add washing gel.
Do not rub the fabric. It is better to lift the thing by the belt, then lower it into the water, slightly pressing it to the bottom.
Rinse in conditioner water.
Do not squeeze, let the water drain itself.

Select the type of detergent based on the type of fabric.

How to restore pleating?

It is necessary to take care of things with pleating with extreme care. Improper ironing or washing can damage the folds

You can almost always return the previous look to your favorite clothes, even if the folds are severely disturbed. Algorithm for restoring pleating:

Baste broken folds along the entire length or pin them together.Starch and leave to dry.
In the meantime, prepare the fixing compound. It will take 1 tbsp. l. sugar and gelatin, 100 ml of a thick soap solution, 70 ml of vinegar. Soak gelatin in cold water for 40-50 minutes. After swelling, add sugar to it and stir until dissolved. Then dilute the mixture with soapy water and add vinegar.
Remove the pins - the folds on the skirt should be held in place by the starch.
Put the product on a sheet of tracing paper, cover with a cotton cloth soaked in a fixing compound. Put another sheet of tracing paper on top so that the impregnation does not stick to the surface of the iron.
Iron until dry. The folds will now be locked.

Pleating looks original and elegant on clothes for children and adults. The technology of obtaining folds on the fabric will help handicraft lovers to significantly expand their creative possibilities.

Ironing chiffon dresses and blouses

With a few affordable and easy steps, a chiffon pleated dress or blouse just looks chic. Let's start:

Turn the product inside out and lay it out on a hard surface.
We run the iron from the central part of the dress to the outskirts, the sliding of the iron should be smooth.
Gauze is used without fail. If the product is dry, then the gauze should be wetted.
If the product is badly crumpled, then it may not be ironed. In this case, cover the dress or blouse with gauze and start steaming.
The soleplate of the iron must be in perfect condition, without any damage. Otherwise, arrows and puffs will appear on the chiffon dress.
To prevent stains and streaks from forming on the dress, do not wet the product with a spray bottle.
If you fear that you will not be able to iron the dress yourself, you can use the dry cleaning services.
The chiffon pleat must be allowed to cool and only then put into the closet.

Chiffon dress can be steamed with a steam generator

Basting

Many craftsmen are sure: you cannot iron a pleated skirt with an iron without basting. It means that each (!) Fold is sewn with long stitches by hand. Only then the skirt is ironed, and then the basting is unraveled.

Miss Purity magazine does not recommend this method for skirts made of delicate materials such as silk (natural / faux) or chiffon. Traces from the needle and ugly creases from the thread will remain on delicate fabric, and constant care in this way will quickly thin the fabric, and the thing will have to be thrown out earlier.

Modern production technologies allow the pleated skirt to do practically without ironing - just take it out of the washing machine and hang it up right away. Once dry, you only need to iron the lining. But if creases have formed, do not be afraid to iron - the gentle temperature will not be able to overcome the factory press, and the folds will not deteriorate.

How to iron pleated dresses and skirts correctly

If you follow all the above recommendations when washing and drying, then ironing will not cause much trouble. Before ironing a pleated skirt, it is advisable not to dry it completely or simply sprinkle it with water: a slightly damp cloth is easier to iron, and it is much more difficult to remove all bruises on dry material.

It is also important to set a suitable temperature regime (it depends on the composition of the fabric)

It is useful to remember that the lining of the product is ironed separately, and the folds themselves are ironed through damp gauze so that weasels and burns do not appear on the fabric. It is especially recommended to iron artificial fabrics and silk from the inside out and through gauze. In addition, silk should not be sprayed from the spray bottle, otherwise stains will remain on it after the water dries.

A function such as steaming is very helpful in ironing a pleated skirt. Hang the skirt on a hanger, straighten all the folds and then walk over it with a steamer. For some products, steaming is contraindicated, so before starting this procedure, it is helpful to take a look at its sewn-in label.

Rules for the care of pleated fabric

Sometimes you can find pleated products that the manufacturer does not recommend ironing. In this case, instead of ironing the corrugated dress, it is necessary to wash it as carefully as possible, and then dry it on a hanger, manually straightening all the folds.

Special ironing sprays, which are on sale, will also help to preserve the original appearance of the shirring. As a rule, they contain starch and silicone, which allows things to keep their shape. A cotton pleated skirt can also be lightly starchy to make it stiffer and less wrinkled. As for expensive and especially delicate things, it would be wiser not to risk their appearance and give them to dry cleaning.

How to iron a pleated skirt correctly?

The first thing to remember before ironing a pleated skirt is to start ironing when the garment is not completely dry.

Ironing on damp fabrics has a more gentle effect, which is important when processing pleated garments. It should also be remembered that skirts made of some fabrics may not be exposed to high temperatures at all - it is enough to hang them on hangers strictly vertically, and then fix and hold them for several hours.

After that, the bruises will completely disappear.

To prevent the corrugated fabric from being burnt or obscured, we iron the pleated skirt exclusively through gauze fabric. If the skirt is made of silk or synthetic fabrics, iron it only from the wrong side, and the lining is ironed separately from the skirt itself. When ironing silk, remember that it cannot be moistened with water - the moisture should only be left over after washing, ironing completely dried clothes is not recommended.

Correct ironing sequence

How to iron a pleated skirt - preparation is complete and you are now ready to start. It is necessary to iron the product in the following sequence:

Turn the pleated garment inside out and slide it over the ironing board.
Carefully iron the lining of the skirt, while also grasping the inside of the pockets.
Smooth out the waist and hem using light pressure.
Turn the skirt over again so that it is facing towards you.
Treat all shiny areas of the garment without touching them with the iron - steam is needed.
Iron the waistband, top, bottom line, side seams, and other parts of the garment.

Well, have you got the answer to the question of how to iron a pleated skirt? As you can see, there is nothing difficult in this - it is enough to follow the recommendations and observe the temperature regime, and also never iron pleated things dry, so as not to spoil their appearance.

How to tidy up a leather skirt?

Leather is considered a very durable material that does not need to be washed or ironed. However, long-term wear also affects a leather skirt (not to mention leatherette products), forming ugly creases. It is best to entrust their elimination to a specialist, but sometimes you have to do this at home at your own peril and risk.
Before ironing a leather skirt, it is advisable to try to straighten it without an iron. The best remedy for this is water, but it should be remembered that you can only moisten (very carefully) only traditional cow and pork skin. After such processing, innovative materials, especially in combination with high temperatures, can completely lose their appearance. Therefore, for any skin or leatherette, all manipulations must first be tried on a small, inconspicuous fragment.

A not too wrinkled leather skirt can be treated with a skin care product and let loose for a while by attaching weights to the hem.
If this does not help, you can treat it with a steamer or place it for a while in the bathroom, close the door tightly and turn on the hot water.
After that, the skirt is laid out on a flat surface and pressed down with a press.
If the bruises have not disappeared, then a dry skirt made of leather or leatherette can be ironed from the inside out through a napkin with an iron in the "wool" mode.

The mode and process of ironing depends on what material your pleated skirt is made of. We will look at the rules for ironing basic fabrics.

Knitted and woolen

A knitted pleated skirt is a practical product that is quite resistant to wear and tear and various interactions, including hot temperatures.

To iron knitwear, you should follow a few simple guidelines:

Ironing is done only from the seamy side.
It is possible to process the material with an iron only through gauze in two layers.
The sole of the device should only lightly touch the surface of the fabric. In no case do not apply increased pressure on it, otherwise you can simply burn it.
Initially, the lining is ironed, then the belt and seams, and only then the front side. When ironing, it is advisable to less touch the fabric with the sole of the iron, and process it only with steam.

Silk

Silk is a very delicate material and it requires extremely careful handling.

In fact, a pleated silk skirt does not need ironing if it is hung on a hanger immediately after washing. If it so happened that you had to put it in the closet, and rough creases and folds appeared on it, then ironing pleated silk products looks like this:

You need to iron the silk exclusively from the seamy side.
Wet gauze or other thin fabric is laid out on top. As the gauze dries, it will be additionally moistened with a spray bottle.
Ironing starts from the top of the product, that is, from the belt. Then the seams are smoothed out.

There is another way to iron a pleated silk skirt. The item is hung over a pot of boiling water on a hanger. The steam will completely smooth out creases and dents in the material.

Chiffon: correct ironing

A pleated chiffon skirt requires very delicate handling. The best option would be to hang it on a hanger and iron it only with steam. It may even be a steam generator, but it is permissible to use a special function in an ordinary iron.

Remember to keep an eye on the intensity and temperature of the steam. It should be necessarily scattered, so as not to act on the chiffon as a blow, but to slightly moisten it and thus smooth it. Any source of hot steam should be kept a short distance from the pleat and not leaned directly against the fabric.

Iron the wrong side with an iron on medium heat. To avoid burn-through, cover the skirt with damp gauze or any thin material.

After ironing, do not rush to put on or put your clothes in the closet. Let it cool completely and straighten out naturally.

Summing up

That's all. Now your new item looks amazing. If you do not fully understand the principle of ironing such products, you can find a video on the Internet on the topic “How to iron a pleated skirt”. They show all the stages of ironing in an accessible and understandable way, and also give various useful tips on how to iron a pleated skirt so that it looks like new even after a fairly long period of wearing. With proper care, your pleated skirt will retain its original appearance for a long time, please with its lightness and splendor. And you yourself will delight your friends with your beautiful appearance, elegant silhouette and incomparable sense of taste. Do not forget that buying new things every season is just to emphasize your irresistibility unnecessarily. It is enough just to properly monitor the things in the wardrobe.

In conclusion, I propose to watch a video on how such folds are created on skirts: