How to grow a rose from a cutting at home?

There are different ways of propagating roses, but we will focus on the most popular one = from the cuttings. Very often we manage to get a stalk of a plant we like, and it is unknown what to do with it so that it does not die. We will help you grow beautiful flowers from rose cuttings.

You can even grow a rose from a bouquet at home by properly rooting the stalk.

How to propagate roses by cuttings

This is a simple method of cutting three-bud cuttings and then rooting them. But questions arise as to how to properly carry out cuttings, is it possible to root cuttings in water?

The middle or upper part of a healthy tree shoot, which is already finishing flowering, is best suited for cuttings. Using a special garden knife or secateurs, it is necessary to cut the shoots 10-15 centimeters long, each of which must have at least 3 buds. Cut them so that the lower cut, made at an angle of 45º, is directly under the lower kidney, and the upper (straight) cut is above the upper third kidney. The technology of growing roses involves partial removal of leaves (this is necessary to reduce volatility). In this case, the lower leaf is completely removed, and the upper ones are shortened by 1/3.

How to plant a rose stalk

What is needed ideally: a sufficient amount of light, an air temperature of + 23-25 ​​° C, moderate watering and spraying.

Consider two ways of rooting rose cuttings:

• in the soil - for this they are planted obliquely on a prepared bed (if cuttings occur in late spring or summer), or at home in pots with a substrate of peat, sand (most) and fertile soil. Cover the planting with a glass jar, creating a small greenhouse. Water the plantings as needed, and before planting the cutting in the pot, add well-washed coarse-grained river sand, into which you need to stick the cutting (the sand will prevent the plant from rotting due to excess moisture). When he begins to give young shoots, you can sometimes open the jar to remove condensation.
• in water - for this, the cuttings are placed in a container with water and left in a warm, well-lit place. From time to time, the water needs to be changed and topped up, and after 20-25 days the cuttings will have roots and they can be transplanted into pots with soil. You can add a root formation stimulator to the water for rooting the cuttings - then the roots will appear faster.

How to grow a rose from a bouquet

Very often there is a desire to grow the same flowers from a beautiful bouquet of roses. It is possible to do this, you just need to cut the cuttings in time and germinate them correctly. Cuttings are carried out when the flowers begin to shed their petals.

Cuttings are cut as usual - from the bottom at an angle of 45º, and straight from the top. There should be 1-2 buds on the handle. It is better to root shoots from a bouquet in the soil according to general rules, but they must be stuck into the substrate strictly vertically, deepening to the first bud. With proper care, they will take root in about a month and start producing young shoots.It should be noted that cuttings of local varieties of roses take root better.

If the plants have taken root in the garden in the garden, then by winter it is better to dig out the first-year cuttings and transplant them into pots for wintering, which must be removed to the house or to a dry cellar. And in the second year, they can already winter in the garden right in the soil, provided that the flowers are securely sheltered for the winter.

To make roses resistant to diseases and pests, you need to take good care of them - water and feed them in a timely manner. The first feeding is needed when young seedlings reach a height of 15 centimeters. For feeding, it is advisable to take a complex fertilizer, at a dosage of 15 grams per 10 liters of water. Please note that nitrogen fertilization of roses must be stopped in the middle of summer, but fertilizers with phosphorus and potassium can be applied until autumn.

Growing a rose from a cutting, video

A stalk of a rose in a potato, why?

In this way, the potato tuber provides nourishment and moisture to the roots and the cuttings grow faster.

Fresh potatoes contain an optimal range of nutrients. It is a long-term source of constant moisture and reliable protection against hypothermia, decay, and the development of bacterial diseases that sometimes affect roses at the initial stage of growth. In addition, it is technically easy to grow a rose stalk in fresh potatoes.

To germinate rose cuttings, take tubers that have been recently dug, not sluggish or spoiled. Remove all eyes to prevent germination.

If the cutting is grown in a pot in winter, then simply select the dense, large potatoes.

For cutting cuttings, it is not recommended to use shoots with unripe buds, as well as with already faded roses, since it is very difficult to root such cuttings - they simply do not take root. Reproduction by cuttings is also possible with a purchased rose from a bouquet - there is no fundamental difference. But keep in mind that Dutch roses are treated with a preservative composition that ensures long shelf life, it is almost impossible to root them.

The length of the cutting should be 15-20 cm. Thus, from one rose or one shoot of medium length, you can get 3-4 blanks for propagation. Cut the cuttings with a sharp tool, preferably with a garden pruner, so that the stem does not squeeze when cut. The lower cut is made 2 cm below the kidney at an angle of 45 °, the upper one is 1 cm above the kidney, and the cut itself can be either at an angle or straight. All lower leaves of the cutting must be removed.

Next, the cuttings are treated with a weak solution of potassium permanganate, and then put in a stimulating solution of any root formation stimulator prepared according to the instructions for a day. You can replace these products with fresh aloe juice.

After all the preparations, the cuttings of the roses are stuck in the bottom part into the prepared hole in the potato. I will clarify that the propagation of a rose in a potato is suitable only for upright varieties. To grow a climbing rose, not a cutting is used, but a layering - a buried shoot rooted in the soil, because growing a layering in a potato tuber is very difficult.

You can root a rose in a potato tuber at home in a pot, or immediately place it in open ground. Planting cuttings directly into the ground gives an advantage - the roses will not need to be transplanted, and this will allow them to bloom in the same year or next spring. The area for planting cuttings should be light, without stagnant water and protected from the wind. Further landing technology is as follows:

• dig a trench 20-30 cm deep (for planting in rows, or for further transplanting to another place) - for planting single bushes without transplanting, separate holes are dug for each plant;
• pour a layer of river sand at the bottom of the pit - this is necessary to exclude contact of the tubers with the ground, and to prevent rotting of the potatoes themselves, and with it the cuttings;
• stick the prepared cuttings of roses into the holes made in the potato tubers;
• place the planting material in a trench at a distance of 15 cm from each other;
• fill a trench 2/3 with earth mixed with sand, lightly tamp.

Planting must be provided with a good level of humidity. Watering should be regular, but not too intense. For the first time, it is recommended to cover the cuttings with a plastic bottle with an unscrewed cap (to ensure air access). On sunny days, plants need to be shaded; on cloudy days, remove the bottle completely. After about a month, when the cuttings take root, the shelter is removed completely.

Planting a rose stalk at home

Prepare planting containers for germinating roses in potatoes at home. At the bottom of the pots, you need to lay drainage, then fill the containers with potting soil (any store-bought soil for flowers will do), together with sand. Place the sprout potato in the pot. Sprinkle with soil.

In order for the cuttings to take root sooner, the soil must remain moist, so at home, in addition to watering, it is recommended to additionally spray future roses with water. A shelter made from a glass jar, plastic bottle, or plastic bag will help maintain warmth and humidity. After the buds begin to develop on the cuttings, the shelter is removed, and the seedlings are gradually adapted to environmental conditions. Particular attention should be paid to the quality of the lighting, but care must be taken to ensure that the sprouts do not overheat under the lamps.

Currently, many flower growers strive to grow beautiful and beloved flowers not only in garden and summer cottages, but also at home. Rose lovers are no exception.

The image of a rose has many meanings: it is a symbol of perfection, pride, wisdom, love, silence and mystery. Images of paradise, heart, beloved, Venus, the Mother of God are associated with her. There are few people in the world who will remain indifferent to such perfection, because she will be able to decorate any celebration, holiday, garden, apartment, and will also bring a lot of admiration to close and dear people. Is it possible to grow a rose from a cuttings at home? It turns out you can. We will consider how to do this later in the article.

How to grow a rose from a cuttings at home?

There is nothing difficult in propagating a rose by cuttings, and even a novice gardener can cope with this without much difficulty. It all depends on the well-chosen material for planting and the precise execution of simple rules.

But it must be borne in mind that not all varieties of roses will be able to submit to the propagation method by cuttings. For example, it is doubtful that wrinkled and yellow park roses will be able to please you with established cuttings, but there will be no problems with miniature and climbing species of these beautiful flowers.

The advantage of the method of propagation of roses by cuttings is that the plants obtained with its help do not form root shoots, and this greatly simplifies care.

It is more successful to carry out such events from the end of June to the end of July, when the rose fades and its leaves and petals begin to fall off. Such a basis has the most chances to revive the finest specimens. But just as often, cuttings are carried out in late autumn, and they even try to grow cuttings of a rose in winter.

Preparing cuttings

Young and herbaceous flower shoots are completely unsuitable for cuttings at home. But the stems of one year of life, with a girth of approximately four to six millimeters, which either have not yet begun to bloom or are already fading, are perfect for these purposes. It's all about the significant content of the amount of carbohydrates in such cuttings, which contribute to faster and more efficient rooting.

How to grow roses from cuttings of donated roses or grown on your own flower garden? Let's talk about this further.

Cuttings of roses should be cut to a length not exceeding 25 cm. When cutting the stems into cuttings, it is very important to ensure that they have at least three buds.Cutting cuttings should be done with a sharpened tool (for example, a special pruner), treated with alcohol and boiling water. The lower cut is made obliquely - at an angle of about 45 degrees under the kidney. The upper cut is made straight, slightly higher than the kidney. In addition, at the bottom cut, it is better to make another light cut along the stem, about two centimeters long. This will speed up root formation.

We must not forget that until the roots have formed in the cutting, its moisture reserve will not be replenished. Therefore, it is very important to reduce the volatility of the existing one. For this purpose, the leaves are partially removed: the upper ones are cut off by about a third, and the lower ones are removed completely.

To increase the percentage of successfully rooted cuttings, experienced gardeners resort to keeping the bottom cut in various liquid biostimulants for plants for half a day (for example, in "Heteroauxin" or "Epin"). Or they simply dip the cut into a dry powdery biostimulant (for example, in "Kornevin"). You can do without them, but this increases the risk of not having a good result, since the use of stimulants in certain quantities has a beneficial effect on the survival rate of cuttings. At the same time, it is very important not to allow the concentration of these substances to be exceeded, otherwise it can negatively affect the flowers. Therefore, it is necessary to strictly follow the instructions indicated on the packaging of such drugs. Consider ways to grow a rose from a cut of a purchased rose or one grown on your site.

Rooting methods for cuttings

Prepared cuttings can be rooted using various methods, of which there are a lot. However, the most effective are:

• in potatoes;
• soil;
• water;
• packages.

In water

Consider how to properly grow a rose from a cutting in this way. This is one of the simplest and most popular rooting methods. Shoots prepared using the above method should be placed in cool boiled water. The water must be changed every two to three days. Thus, after a month, roots will begin to form in the cuttings, which can then be planted in the ground. Following this, the cuttings will need to be covered with plastic bottles and not removed until leaves form.

For this method of cuttings, it is better to take young shoots from the side branches of the flower.

However, when using this method of rooting cuttings, some nuances must be taken into account. Firstly, it is better not to put a large number of cuttings in one container - they will be cramped. Secondly, you cannot pour a lot of water into the container, as this is fraught with a lack of oxygen at the bottom of the container and the subsequent death of specimens from decay. Therefore, just in case, you need to prepare for the fact that not all cuttings can survive and take root. In addition, this method is not suitable for all types of roses. The most successful result will be with ground cover and dwarf species.

In the soil

And how to grow a rose in soil from a cuttings at home? This type of rooting is the most difficult in comparison with the others, but it gives a good result by increasing the percentage of plant survival.

How to grow a rose from a cutting? To begin with, pour a layer of drainage on the bottom of the pot. It is better to use medium-sized fragments of bricks or rubble as it. After that, the drainage is covered with a special soil for roses. It can be purchased ready-made from flower shops or garden shops. But the best option is to prepare the soil with your own hands. To do this, mix in a small pot in equal amounts sod and leafy soil with sand (1/3 sod land, 1/3 leafy soil and 1/3 river sand).

The prepared mixture is additionally covered with sand on top of 5-7 cm. When planting cuttings, it is worth checking that they are deeper than the layer of sand, that is, directly in the ground.

It is better to place the cuttings obliquely, with an oblique cut down, at a distance of about three to five centimeters from one to the other. The distance directly between the rows themselves should not be less than ten centimeters. After that, the flowers must be watered with clean water and covered with glass jars or plastic bottles with a cut-off bottom.

Roots will begin to form after 25-30 days. Throughout this period of time, the soil must be kept moist. When the first young leaves appear, in order to harden the plant, you can occasionally remove the jars (bottles), which can then be completely abandoned.

Carrying out cuttings in late spring or summer, some gardeners try to immediately plant roses in the garden, others still resort to using pots so that temperature drops and bad weather conditions cannot harm the plants. Moreover, in late autumn, in any case, it will be necessary to dig up the cuttings that have grown in the garden, and then transplant them into pots and remove them into the house so that the young bush will survive the winter.

In potato tubers

Now we will learn how to grow a rose from a cutting in a potato. This is a fairly common, effective and reliable method. To do this, the length of the stem of the flower should not be less than 25 cm. Potato tubers are better to pick up medium-sized, and also to remove the "eyes" from them in order to exclude their germination. Then, small indentations of a suitable diameter must be made in the tubers. Cuttings will be inserted there.

After that, take a suitable container, at the bottom of which a layer of sand about 3-4 cm deep is poured.Then, potato tubers with already introduced cuttings of flowers are placed in this container, keeping a distance of 10-15 cm from each other, which will need to be sprinkled with a small amount of earth ... Immediately after planting, tubers with cuttings must be irrigated with a thin solution of potassium permanganate (the solution should be weak, pale pink in color) and cover with jars. Likewise, the rose will get all the nutrition and nutrients directly from the potatoes. As for watering, then, despite all the moisture that the potato tubers create, it must be carried out regularly. And at least once a week, it is advisable to do this with sweetened water. To do this, simply dilute 2 teaspoons of regular sugar in a glass of water.

Most gardeners choose this method, which ensures the highest survival rate of cuttings when growing flowers at home. Moreover, with further planting, their adaptation process occurs more painlessly and faster. Young shoots emerging from the buds will confirm the success of rooting.

In the package

Consider how to grow a rose from a cuttings in a bag. There are several ways, but the most popular are two of them.

The first way

Many will be interested in learning how to grow a rose from a cutting in this way. For this, in addition to the package itself, you will need moss. The moss is placed in a plastic bag, and then prepared cuttings are inserted into it. After that, the bag should be inflated tightly, tied securely and hung. With this method of growing cuttings, there is no need for watering, since the condensation that accumulates in the bag will moisten the moss and cuttings. And thus, the roots should be formed by the end of the fourth week.

Second way

To grow a rose from a cutting at home in this way, you need to soak about a dozen cuttings in water at room temperature for 24 hours, and then wrap it in a simple newspaper. The resulting bundle should be wrapped in a plastic bag or bag and left to be stored at home at a temperature slightly above 20 degrees.

Open the bag every week, inspect the cuttings and slightly dampen the paper.If, for some reason, the stalk begins to turn black or rot, then it must be thrown away so that rotting does not spread to other specimens. In this case, the paper should also be replaced to get rid of the mold.

After two weeks, the roots should appear.

This method is also called the Burrito Rooting Method. This method is considered ineffective. But, despite this, he is popular with gardeners.

Trannois cuttings method

This is another way to grow a rose from a cuttings at home. However, it enjoys little public acceptance among gardeners and rarely gives the expected result. Growing flowers using this method should be carried out at the beginning or in the middle of summer. The essence of this method is to allow the stem of the rose to receive as much nourishment as possible from the leaves before cutting it. To do this, the cut stems are pinched and left until the buds swell in the lower part of the branches. When the buds swell, the wood begins to ripen, its readiness for growth and development will appear. In this process, it is very important to prevent the appearance of leaves from the buds, otherwise this reproduction will be completely ineffective.

Planting rose cuttings in the ground

Once the roots appear on the cuttings, they can be planted in pots. But it is important to make sure that the upper bud of the cutting rises above the ground level.

A greenhouse effect should be created around the planted rose. To do this, the container with the seedling must be placed in a large polyethylene bag or covered with a plastic bottle with a cut out bottom. The container with seedlings should be in a room with an air temperature of about 25 degrees. In addition, rose sprouts require regular spraying with water from a spray bottle.

It is best to plant roses directly in open ground at the very end of spring, in the absence of a threat of frost return. Usually, a well-lit place without drafts and winds is chosen for this. The soil should be fertilized with organic substances, and if necessary, add mineral components.

Saplings need to cut off the stems, leaving three to four buds. And do not dig large holes, there will be enough depth for the size of the roots. After planting, the roses need to be watered and sprinkled with sawdust to retain moisture. At first, rose bushes should be protected from direct sunlight. The adaptation period of seedlings in a new place lasts about half a month, and then they begin to grow.

Whichever method is chosen, it is important to remember that the best result is easier to obtain at a favorable temperature, which should be about +25 ° C, as well as with good illumination and timely watering.

Conclusion

Summing up, we can say that there are currently not so few methods and ways of growing a rose from a cutting at home. Each of them has its own disadvantages and advantages, some of them are less effective, but more convenient, and vice versa. Therefore, when choosing a method to grow these magnificent flowers, it is important to remember that roses are capricious plants and require good and complete care.

Many growers strive to grow their favorite flowers not only in their summer cottages, but also at home. Rose lovers are no exception. They successfully grow these beautiful flowers from cuttings at home.

We grow a rose from a cutting in an apartment

Propagating roses by cuttings is quite simple, and even a novice gardener can cope with this matter. The main thing is to choose the planting material correctly and follow the simple rules exactly.

It is also important to consider that not all varieties of roses lend themselves to this method of propagation. For example, yellow and wrinkled park roses are unlikely to please you with established cuttings, but there will be no problems with climbing and miniature species.

General recommendations

The most suitable time for such an event is from the end of June to the end of July.

Cooking cuttings

Young and herbaceous shoots of roses are not suitable for cuttings at home. For this purpose, the stems of the first year of life, 4-5 mm thick, which have not yet begun or have already finished flowering, are ideal. They contain more carbohydrate, which contributes to better rooting of the cuttings.

Cuttings of roses are cut up to 25 cm long

When cutting the stem of a rose into cuttings (each 15-25 cm long), make sure that there are at least 3 buds on them. The lower cut is made oblique - at an angle of 450, directly under the kidney. And the top cut is made just above the kidney. At the lower cut, you can make an even shallow longitudinal incision along the stem, two centimeters long. This will speed up root formation.

Make a shallow cut along the bottom of the stem

Remember that as long as the cutting has no roots, its moisture supply will not replenish. Therefore, it is important to keep what you already have. In order to reduce evaporation, the leaves are partially removed: the lower leaves are removed completely, and the upper ones are cut off by about a third.

To increase the percentage of successfully rooted cuttings, the bottom cut will survive well for 12 hours in some liquid plant biostimulant. Or you can simply dip it into a dry powdery biostimulant (like "Kornevin", etc.).

Biostimulant treated section

Rooting methods

Cuttings prepared in this way can be rooted in different ways. A lot of them. But the most effective and common:

• in water,
• in the ground,
• in potatoes,
• in the package.

In water

The simplest and most common way is in water. The shoots prepared in the above way are simply placed in chilled boiled water and that's it.

Every couple of days, the water must be changed. After about a month, the cuttings will have roots and they can be planted in the ground. After planting, the cuttings should be covered with plastic bottles and do not remove them until the leaves appear.

The disadvantage of this method is the low oxygen content in the water. Therefore, be prepared for the fact that not all cuttings take root and survive. And this method is not suitable for all varieties of roses. The result will be more successful with dwarf and ground cover species.

Rooting rose cuttings in water is the easiest way

In the soil

Rooting cuttings in the soil is a more troublesome method, but it gives a higher survival rate.

At the bottom of the pot, you need to pour a layer of drainage (usually crushed stone or finely broken brick is used), then a special soil for roses. You can buy it ready-made, or you can make it yourself. To do this, you need to mix:

• 40% sod land;
• 40% leaf land;
• 20% river sand.

On top of the prepared soil mixture, approximately 5-7 cm of sand is additionally poured. When planting cuttings, you need to make sure that they are exactly in the ground, that is, deeper than the sand layer.

They are placed at an angle, with an oblique cut down, at a distance of three to five centimeters from one another, and the distance between the rows is made at least 10 cm. Then everything is watered and covered with glass jars or plastic bottles with a cut off bottom.

The roots should appear in 25-30 days. All this time, the soil must be kept moist. After the appearance of young leaves, the cans can be periodically removed to harden the plant, and then completely abandon them.

If grafting is carried out in late spring or summer, then some gardeners plant roses immediately in the garden. Others, even during this period, use pots first so that changes in the weather and possible temperature drops do not harm the plants. Moreover, by winter, the cuttings that have grown in the garden still need to be dug up, transplanted into pots and removed to the house or cellar - otherwise the young bush will not survive the winter.

In a potato

A fairly common, proven and effective way to grow roses from cuttings at home is to root them in potatoes. The length of the cutting should be 20-25 cm. Potatoes will be needed medium in size, and so that they do not germinate, it is necessary to remove the eyes. Cuttings are inserted into the potatoes prepared in this way. Previously, a shallow hole of a suitable diameter must be made in the potato with a large nail or something similar.

You need to make a hole in the potato

Then you need to take a suitable container and pour a layer of sand about 3-4 centimeters on the bottom. Then potatoes with cuttings are placed there at a distance of 10-15 cm from each other, which can be sprinkled with earth a little. Immediately after planting, they must be poured with water with potassium permanganate (the solution should be light pink), and covered with jars. In the future, watering is carried out as needed. The plant will receive all the necessary substances and feeding from the potato.

Many gardeners prefer this particular method, as it provides a high survival rate of cuttings at home. And in the future, when landing, the process of adaptation is faster and more painless for them. Young sprouts emerging from the buds will confirm that rooting was successful.

In the package

1st way

Rooting of cuttings of a rose in a package is also very popular. Moss is placed in a plastic bag, prepared cuttings are inserted into it. The bag is then inflated, tied tightly and hung. The condensation that will accumulate in the bag will moisten the moss and cuttings, so you don't need to think about any additional watering. The roots will appear by the end of the fourth week.

2nd way

10-12 pieces of cuttings are pre-soaked in water for 24 hours, and then wrapped in regular newspaper. The resulting bundle is placed in a plastic bag or bag and kept at home at a temperature of about 20 degrees.

The bag is opened weekly, the cuttings are inspected and the paper is slightly dampened. If a stalk turns black and starts to rot, then it is thrown away. In this case, you need to change the paper to completely get rid of the mold.

After about half a month, roots will begin to appear.

Planting rose cuttings in the ground

After the roots have appeared on the cuttings, they can be planted in pots. Make sure that the upper kidney is always above the ground level.

A greenhouse effect should be created around the planted rose. To do this, put a container with a seedling in a large plastic bag, or cover it with a plastic bottle without a bottom. The temperature should be around 25 degrees. The sprout should be regularly sprayed with water from a spray bottle.

It is better to plant roses in open ground at the end of spring, when there is no threat of return frosts. A place for this is chosen well-lit, without winds and drafts. The soil must first be fertilized with organic fertilizers, if necessary, add mineral components.

Saplings are cut off the stems, leaving three to four buds. It is not necessary to dig large holes, the size of the roots is enough. After planting, you need to water the roses and mulch with sawdust. It is advisable to protect the bushes themselves from direct sunlight for the first time. The adaptation of a plant to a new place takes about a couple of weeks, and then it should go into growth.

Conclusion

Whichever method of growing roses from cuttings at home you choose, remember that it is easier to get a successful result with good illumination, an air temperature of +25 degrees and regular watering. However, the last two conditions can be excluded if you decide to root the cuttings in water or a bag.

Content:

What if you were presented with a lush and beautiful bouquet of roses, which would be a pity to even throw away? Of course, plant it in your garden or on your balcony! But how to make this flower take root? What kind of roses are suitable for such an undertaking? Let's take a closer look at how to grow a rose from a cutting at home.

What flowers are best for you?

To avoid further disappointments and not to waste your time, give up the rooting of imported flowers, opting for ours, domestic and acclimatized.The fact is that imported roses are treated with special preparations, which seem to preserve them so that the flowers can withstand transportation and stay in the bouquet longer. Therefore, they have already lost their ability to reproduce by cuttings.

If you liked a bouquet of roses, and you definitely decided that you will propagate it, then you will have to get down to business immediately, without waiting for the start of wilting. If you hesitate, in a few days the stale roses in the vase will no longer be able to take root!

A few more tips for choosing roses:

• One cutting should have 2-3 buds.
• Choose a stem that is just beginning to lignify, is too young and flexible, or completely lignified may not take root.
• Try to keep the stems medium in size - not too thin or too thick.
• Use the middle part of the stem, it is more likely to take root.

Ideally, it is advised to root roses in the fall, but in general the time of year does not matter - when you got the flowers, then proceed.

How to prepare cuttings

Let's consider how to get cuttings from flowers correctly:

1. Trim the cuttings from the stems of the roses, leaving about 15 to 30 cm in length. Remember to keep two or three buds on each of them, located at the bottom and top of the cuttings.
2. Remove all the lower leaves and buds from the cutting, cut off the thorns, and cut the upper leaves in half so that the moisture does not evaporate so quickly.
3. Make a straight cut on the top of the cutting and seal it with wax from paraffin wax.
4. Cut the bottom of the cutting at a 45-degree angle.
5. Prepare a manganese solution and soak the cuttings in it for a day to disinfect them.

How to grow a rose from a cutting in the ground

The most traditional way to grow a rose from a cut is to plant it in the ground:

1. Prepare containers for planting the cuttings by treating them with a potassium permanganate solution and drying them thoroughly. Use a bucket, pot, cut-off bottle, etc.
2. The bottom of the container should be covered with a drainage layer, for example, expanded clay or foam.
3. You can put soil on top. To be sure how to grow a rose from a cutting one hundred percent, it is better not to experiment with garden soil and humus, but to purchase a special soil "For roses" in a garden store.
4. We plant flowers, deepening the cuttings a few centimeters down - make sure that 1-2 living buds remain above the ground.
5. We create the effect of a greenhouse by putting a plastic bottle or polyethylene film on a container with a handle.
6. We maintain soil moisture constantly, without overdoing it and not provoking rotting of roses.
7. Remove the bottle when you see the first leaves appear on the handle.

Growing roses from cuttings in potatoes

It is popularly used by the people to grow a rose from a cutting in this way, like growing in a potato: it creates a suitable humid environment for this and supplies the plant with useful trace elements. How it's done:

1. Cut off all the "eyes" from the potato. Use a knife to make a hole for the handle.
2. Plant it, for example, in a pot, at the bottom of which drainage should lie, and then river sand with a layer of 10 cm.
3. Insert the rose with its lower end into the potato, place in a pot and cover with special soil. If you are planting several potatoes in a row, then keep a distance of 15 cm between them.
4. Dig in the cutting to the height of one bud. Cover with a bottle or glass jar.
5. Then we begin to water the cuttings daily with plain water, and about once every five days with sweet water (we make a solution of water and sugar in a ratio of 1 glass to 2 tsp).
6. After a couple of weeks, we remove the greenhouse and plant the rose in a permanent place.

How to grow a rose from a bouquet in water

The third popular way to grow a rose from a cutting is to plant it in water:

1. Dip the prepared stalks into a container with settled water and put them in a secluded place without a draft and direct sunlight. Do not immerse them too deeply, 2.5-3 cm will be sufficient.
2. You can create a greenhouse by covering the twigs with a plastic bag.
3. Change the water to a new one every other day and wait for calli to form on the cut of the branches - growths from which the roots will go. This should happen in two to three weeks.
4. When the roots are strong, you can plant the roses in the ground.

And from this video you will learn another way to plant a rose from a cutting using the burrito method:

See also: What to do when the orchid has faded? Care of a capricious plant