How to clean apple earbuds from wax

Cleaning methods

1. Inserts.

In headphones of this type, the mesh is covered with a plastic cover. If the model is collapsible, you can remove the cover by turning it counterclockwise.

You can take a small container, pour 1-2 tbsp. l. alcohol and immerse the mesh surface in it, letting it soak for a couple of minutes. Remove the remaining dirt with a cotton swab.

If the mesh is not removable, most of the hardened wax can be removed with a toothpick. Then you need to soak a cotton pad in alcohol and wipe the surface so that the liquid does not get into the bowl. After the procedure, a paper towel or napkin is taken out and the liners are placed on it to dry.

It is very important not to let the wires get wet, otherwise the equipment will break down.

2. Vacuum headphones.

First you need to remove the silicone tips and determine how big the dirt is. If the mesh is not too tight with dust and earwax, then you can simply wipe all surfaces with a cotton pad moistened with alcohol, hydrogen peroxide or glass cleaner. If a more thorough cleaning is required, then it is recommended to perform the following steps:

1. Pour 3% hydrogen peroxide into a small cap (for example, from a plastic bottle or toothpaste) so that the liquid barely covers the bottom.
2. Dip the mesh of the earphone lightly into the container, then pull it out. Repeat several times until the contaminants react with the peroxide - the liquid hiss or just visually begins to corrode the dirt.
3. Leave the appliance to dry for 2-3 hours on a napkin or paper towel.

There are models of vacuum headphones with a removable mesh. In this case, you need to remove it with tweezers or a needle, put it in an alcohol solution and leave for a few minutes, then pull it out and dry it.

Cleaning your headphones with hydrogen peroxide

So, we are faced with the task of cleaning the earwax, which actively accumulates on the headphone case during operation. Sulfur itself is not exactly dirt, but rather a defense mechanism. It is produced by the human body to keep out dust, bacteria and small debris.

During my life I have tried different methods. The old headphones were washed under running water and dried in a bag with rice. And they worked at the same time long enough! With modern "ears" such a trick will no longer work. I will show you a method that always helps me to quickly and easily clean earwax from headphones and not kill them with this cleaning. And ordinary hydrogen peroxide, which can be bought at any pharmacy, will help us with this.

Note: A small lyrical digression on the use of alcohol. Very often I come across advice on the forums and blogs to perform this cleaning with alcohol. I tried this and got the exact opposite result! Alcohol does not dissolve sulfur, but on the contrary - under its influence, sulfur turns into harder lumps, which are even more difficult to remove. Moreover, alcohol itself, being a good solvent, destroys the adhesive base and can even damage rubber seals.

To clean the headphones, we need regular hydrogen peroxide, which is available in the pharmacy, cotton swabs and cosmetic cotton swabs. I do not highly recommend picking with matches and toothpicks!

Pour the peroxide into a low, flat container. A plastic lid from a can or bottle is perfect. You need to pour quite a bit - so that when you put the headphones there in the peroxide, they are not completely immersed, but only the mesh-lattices. The headphones will be soaked for 20-30 minutes, after which they need to be taken out and cleaned of dirt and sulfur residues using cotton swabs.

Then blot them well with a cotton swab or soft absorbent cloth and leave to dry in a dry warm place for 3-4 hours.Only after such a thorough drying can the headphones be connected and their performance checked.

Features of cleaning vacuum earbuds

Vacuum headphones differ from conventional ones in that they have special rubber earbuds that are inserted into the ears. They are the ones who collect most of the dirt and earwax on themselves. Fortunately, the earbuds are removable and easy to clean.

It is also best to rinse them in hydrogen peroxide, helping yourself with a cotton swab

In some cases, you can use a toothpick, but this must be done very carefully so as not to damage the liner.

If the mesh filters of the headphones themselves are heavily contaminated with sulfur, then they can also be immersed in peroxide for 20-30 minutes. Lower the main thing so that there are only nets in the peroxide. After that, it remains only to remove the remaining dirt with chopsticks and dry the headphones.

How to quickly clean your EarPods and AirPods Pro

Now comes the fun part - cleaning expensive headphones from Apple - EarPods and AirPods Pro. On the one hand, these are all the same inserts. But only quite expensive. And in the case of Airpods, these are also built-in batteries, that is, it is completely undesirable to wet them!

Let's start with wired Apple Earpods. They have a built-in non-removable mesh that cannot be removed. Therefore, let us do so. First, remove large dirt with a toothbrush:

Some people usually manage to do this with a needle, but I do not welcome this method.

After rough cleaning, we thoroughly moisten a cotton swab with peroxide and place the EarPods with a mesh on the damp cotton wool and press down a little. In this position, they must be left for 20 minutes so that the earwax is soaked. After that, remove the remaining contamination with cotton swabs.

The second method is suitable for those who are afraid to wet their AirPods, but really want to clean them. This life hack will help us with this! There are special adhesive pads on sale, somewhat reminiscent of chewing gum or plasticine. I prefer the UHU Patafix brand.

We take the pad, apply it to the grille of the earphone and press it so that the sticky mass can catch the sulfur and dirt. After that, open the Airpods pillow. We do the same with the side meshes:

Let's see the result. You can see what I got in the photo. In my opinion, great! And most importantly - it is safe for the device!

P.S .:

In conclusion, I will tell you a little how you can clean the wires and plug of the headphones. You can use a regular damp cloth to clean the wire. We put the wire on it, and fold the napkin itself in half. We stretch the wire through the resulting filter several times until it becomes clean.

The headphone plug, as well as the connector where it is inserted, is wiped with regular alcohol. If the plug is heavily soiled, then regular baking soda can help clean it, which works great as an abrasive for dirt, but doesn't damage anything!

Cleaning steps for vacuum headphones

Cleaning your vacuum earbuds requires a specific step. You can properly clean the vacuum headphones with alcohol or soapy water. In some models, it is possible to remove the mesh with tweezers or a small needle. The removed mesh can be placed in an alcohol solution for a few minutes. Then take it out and dry it.

You can also apply quick cleaning, which consists of the following steps:

• Prepare a toothpick or cotton swab;
• Prepare hydrogen peroxide;
• Moisten a stick with peroxide;
• Clean the head of the headphones with gentle movements;
• Clean small grooves and mesh with a toothpick.

To keep your headphones clean and working well, you need to take care of them regularly. Proper care is the key to a long service life. When using headphones, you should follow the rules.

For headphones to work well, they need to be cared for properly.

Headphones are classified as personal items and, in terms of hygiene, they can only be used by 1 person.It is necessary to regularly cleanse the auricle from the accumulation of earwax. Clean the headphones whenever they get dirty. The recommended amount per month can be up to 1 to 3 times.

The headset for Apple devices is interesting not only for its appearance, but also for its design. For example, the Apple Earpods headset, released specifically for the Iphone, has a comfortable body and excellent sound purity. This headset is made taking into account the anatomical features of the human ear.

Cleaning your iPhone headphones is also pretty quick and easy. To do this, you will need all the same cotton swabs, toothpicks, an alcohol solution and hydrogen peroxide. It is worth noting that 3% pharmacy peroxide is taken to clean the headphones. It copes well with any dirt accumulated on the headset.

You can clean headphones from an iPhone using peroxide

In order to properly wash your headphones, you must:

1. Soak a cotton swab in peroxide, and wipe the mesh of the headphones with it, while making sure that the liquid does not penetrate inside.
2. The mesh and hard-to-reach places are cleaned with a toothpick.
3. After all manipulations, the headphones must be wiped with a dry cloth.

Headphones are a device without which it is difficult to imagine modern life. Regardless of which manufacturer has released an accessory, it requires proper care and regular cleaning. Timely procedure for cleaning the headset from dirt and wax will help to significantly extend the life of this device.

How do I clear different models?

The cleaning process depends on the type of earbuds and will look different for each model. Let's consider the main options.

Vacuum

Such headphones are also called in-ear headphones. They are fully inserted into the ear, blocking extraneous sounds. As a rule, there are vacuum pads on any such model.

How to clean:

• remove the pads, wash with a light soapy solution and lay on a paper towel until completely dry;
• slightly moisten a cotton pad with alcohol, and then wipe the surface and wire of the device;
• these are non-separable headphones, so it will not be possible to remove the mesh, which means we act like this: pour a small amount of peroxide into a small container (you can cover) and immerse the headphones so that the liquid touches the mesh, but does not go further;
• the duration of the procedure is a quarter of an hour, while you can hold the headphones with your hands or fix it with a clothespin (tape);
• remove the device from the peroxide and dry on a towel.

Earbuds

These are some of the simplest earbuds out there. They can be collapsible or not. If the headphones are collapsible, proceed as follows:

• wipe all external surfaces with alcohol or peroxide;
• on top there is an overlay that needs to be unscrewed by turning it a couple of times (most often clockwise);
• the pad must also be wiped with any disinfectant solution;
• pour a disinfector into a small container and fold the nets there, carefully removing them from the device;
• remove the mesh, dry it and reinsert it into the product;
• screw back the plastic cover.

Overhead

Large on-ear headphones that don't fit directly into the ear canal also tend to get dirty. Clean them like this:

• remove the pads, wipe them with a soft cloth or process with a mini vacuum cleaner;
• moisten a stiff brush a little in alcohol diluted with water, and wipe the surfaces and speakers;
• put the headphones on a towel and wait until they dry;
• put on the pads.

Apple EarPods

Headphones from the iPhone are positioned as collapsible, but this process is complicated and can in some cases end in failure. It is better not to disassemble the device unless absolutely necessary. If you still want to do this, use the following instructions:

• take a thin knife and pry off the speaker cover;
• remove sulfur and dirt with a toothpick;
• moisten a cotton swab in a disinfectant solution, squeeze and wipe the inside of the device;
• put the lid back in place by gluing it (you cannot do without gluing, the manufacturer provided it).

Apple EarPods are white headphones, so of course they get dirty quickly. If yellow spots appear on the product, it is quite easy to bleach them with peroxide.

By the way, nail polish remover (without acetone) may be suitable for this purpose, but you must act carefully so that the composition does not get into the headphones themselves. As for the wires of any model, they are quickly cleaned with ordinary wet wipes or a cloth.

If the dirt is ingrained, you can use alcohol, peroxide. The liquid is applied to the stain, and then rubbed with a sponge with light effort.

Shake the product well to drain the water, then dry it with a cotton pad. After that, you need to put the headphones in a warm place, and if you have no time to wait, you can simply blow them out with a hairdryer.

For information on how to clean Apple EarPods, see the following video.

Types, design features

Expert opinion
Natalia Osadchaya

In accordance with the placement in the ear / in the ear, headphones are divided into on-ear (circumaural, supraaural) and in-ear (intraural), depending on the method of making the sound head - open and closed.

Circumaural

The headset surrounds the entire ear. It is made of leather, textiles, more expensive materials (velor, artificial or natural leather). Thanks to its design, the headset isolates well from ambient sounds, but at the expense of excessive perspiration due to the closed case.

Supraaural

The headset is placed directly on your ear. Most often it is made of foam rubber or leather. The design is mainly used in portable models, sometimes at home.

Intraural

This type fits right into the ear. They are divided into buttons and droplets:

• Buttons. They lie at the mouth of the ear canal. They are often sold with portable players. Sound quality is generally poor, as is the price.
• Droplets. The droplets - vacuum earbuds - sit directly in the ear canal. They have silicone or foam extensions that "seal" the ear canal so that the listener is not disturbed by ambient sounds.

Video instruction

The video below shows the process of cleaning the included iPhone headphones and bleaching the connecting lead. After reviewing it, you can clearly verify the effectiveness of the described methods and first evaluate the result obtained.

If the smartphone is used for a long time and is actively used, users begin to face problems with the malfunctioning of the headphones or headset. How do I clean the headphone jack on a Phone 5 or 4? After all, there are times when these parts completely refuse to work or it happens that the sound periodically turns on on its own. But do not be upset, some of these problems can be eliminated by yourself with a simple cleaning, this is not at all difficult to do.

Before you start cleaning the headphone jack on your Phone 5 or iPhone 4, keep in mind that the entire procedure must be done with extreme care. You must try not to damage the port itself and the fragile parts that are adjacent to it. And use only the recommended cleaning agents for cleaning.

do not forget to turn off your phone before starting work

And use only the recommended cleaning agents for cleaning. do not forget to turn off your phone before starting work.

Attention!!!
We are not responsible for your actions. If you are not sure of the final result, then contact your nearest phone repair service center for help.

Ear sticks

For some reason, many sites on the Internet write that sulfur and other relatively large debris from hard-to-reach places on the headphones should be removed with toothpicks. I think this is sheer nonsense.A toothpick can damage the membrane and other parts of the headphones, so I recommend that you either be as careful as possible when doing this, or give preference to ear sticks.

The earplugs are fine even for removing wax from the interior of the EarPods or AirPods, where the protective mesh is located. And their soft tips will help you avoid damage.

Earpabs are suitable for any hard-to-reach and internal parts of earbuds, in-ear and on-ear headphones. If the dirt is old and dry, you need to moisten them in one of the solutions, which I will discuss later.

Instructions: how to clean headphones (video)

Also, cleanliness is a guarantee of health. If you neglect regular cleaning procedures, you can allow painful bacteria to develop in the auricle, which is a consequence of many dangerous diseases. You can clean the headphones yourself at home without the help of specialists. To do this, you need to arm yourself with alcohol and cotton swabs. Cleaning should be done carefully and carefully. If you follow all the tips and tricks, the headphones will always work properly.

When purchasing a headset for your phone, you want it to last a long time and provide quality work. During use, the headphones tend to get dirty, which can affect the transmission of the audio signal. These are mainly dust and dermal tissue particles.
Taking into account the effect of earwax, impurities are not separated by conventional blowing, as they have an adhesive base. Let's consider how you can clean your headphones without damaging your technical fixture.

Choose the correct method depending on the materials used in the headset. Some items can be washed using water or detergent, while others are only allowed to dry clean. So, let's take a look at how to clean headphones, taking into account their features.

Vacuum

Vacuum headphones can last a long time if they are cleaned regularly. This is especially true for white headphones, as dirt greatly spoils the appearance. The best wire cleaner is nail polish remover
... Rubber tips are wiped with a cotton swab dipped in hydrogen peroxide. The net should be immersed no more than 5 mm in hydrogen peroxide
... The procedure can be performed several times until the foaming reaction stops. After the performed manipulations, the parts should be laid out on a paper towel until completely dry.

In-ear

In-channel elements are washed with conventional soapy water
... For these purposes, you need a soft cloth with which you can wipe the attachments and a toothbrush, which allows you to clean hard-to-reach places. At the end of the procedure, it is fashionable to dry the headphones with a hairdryer.

Overhead

Full-size on-ear headphones are equipped with soft ear cushions that are not advisable to expose to moisture, as they may lose their shape. They definitely cannot be washed. Suitable for cleansing vacuum cleaner or clothes brush
with a sticky roller.

Apple EarPods

The headset from the iPhone EarPods is the best for Apple technology, therefore it is very popular among users. The Apple EarPods 5 kit not only has clear sound, but also active bass. The headset is produced without removable attachments and requires, one might say, jewelry cleaning. Use a toothpick or dry toothbrush to separate dirt particles from the mesh.

It is important to do everything very carefully, without pressure, otherwise impurities can be pressed inward and deform the membrane. Smaller grains of dust are blown through

Housing and wires can be wiped with a damp alcohol wipe
... The rubbing alcohol will help wash away dirt and allow moisture to evaporate instantly.

Depending on the type of headset, the most gentle, but effective method of cleaning from dirt is chosen. It is especially offensive when an expensive headset starts to fail, for example, as in the set of 5 iPhones. Therefore, cleaning your apple headphones should be correct and done regularly.

Since headphones are in direct contact with the human body, hygiene is important. Dirty earmuffs can become a source of not only bad sound, but also various inflammations of the ear canal caused by bacteria that actively multiply in a dirty environment.

1. If the first noise appears, do not wait for further deterioration, but immediately perform gentle cleaning. At the stage of low pollution, you can get by with an ear stick and hydrogen peroxide.
2. Observing personal hygiene, it is better to handle the part of the headset inserted into the auricle with every user change
   ... Multiple family members often share the same device, which makes it more likely to clog.
3. You need to clean not only the headphones, but also the auricle itself from the accumulation of sulfur deposits. This should be done regularly, and how often depends on the individual characteristics of the organism.

Regular care can maintain the aesthetic appearance for the entire life of the headset, and also will not create discomfort to the ears when playing sound. Extraneous noise, different volume of the left and right earphones negatively affect perception and cause irritation.

Sequencing

First, detach the parts that you can remove from the headphones without brute force and easily reattach. The most common models of in-ear headphones, which are often included in the headset set for phones, players, tablets, cannot always be disassembled, but some of them can be removed with vacuum tips, rubber caps and even nets (using tweezers, gently prying the edge with a needle).

Apple's Wireless AirPods for iPhone 7 are beautiful and functional

It is most convenient to wash the removed nozzles in warm soapy water, and it is better to soak the nets for a short time in alcohol or ordinary hydrogen peroxide (3%) to dissolve the remnants of earwax. For soaking small parts, it is recommended to use miniature containers: lids from plastic bottles, glasses, etc. It takes 5-20 minutes in time, depending on the degree of contamination. The washed and disinfected parts are laid out on a napkin so that they are completely dry.

After cleaning and drying the headphones, all that remains is to replace all previously removed elements and enjoy "clear" sound

If you have a non-separable model, then you will have to clean the earphones from the wax only from the outside. For this you will need:

• alcohol or hydrogen peroxide;
• ear sticks;
• cotton pads;
• toothpicks;
• miniature capacity;
• Scotch;
• dry wipes or soft rags.

The outer surface of the mesh is cleaned with ear sticks dipped in a disinfectant. Contamination from the most inaccessible places (grooves, joints, depressions) is obtained with the help of toothpicks.

Earplugs are convenient to use for cleaning the headphones

Instead of mechanical cleaning, some advise very carefully to soak the headphones in alcohol or peroxide so that only the mesh is in contact with the liquid, but not the inner membrane and wires. To soak non-separable headphones, alcohol or peroxide is poured into a container of a suitable size by no more than 3-4 mm. In this case, the head of the earphone must be fixed to the container with tape. After 10-15 minutes of such soaking, all contaminants should dissolve, it remains to wipe the mesh with a dry cotton swab or disk and put it on a napkin for several hours for final drying.

You can also use Blu Tack to clean the headphones (description from Wikipedia here). This is a plastic-like sticky mass that will quickly and effectively cope with cleaning the earbuds (the mass is gently pressed into the mesh and immediately gets out with adhering dirt)

The outer parts of the headphones, heads and wires also get dirty, this is especially noticeable on white parts. They must be wiped with a cotton pad or soft cloth dipped in disinfectant or soapy water.External processing does not affect the sound quality and performance of the device, but it helps to clean the headphones completely, return them to a decent and presentable look.

Non-separable in-ear headphones require cleaning with a mesh and wires

In order to properly clean headphones from an iPhone (iPhone), for example, EarPods, which do not disassemble at all, after soaking or wet wiping, some advise using a vacuum cleaner. This method of cleaning requires some effort. The nozzle of the vacuum cleaner is too wide for cleaning miniature nets, so they take the narrowest nozzle and fix a thin tube from the juice (dropper, ballpoint pen body, etc.) in it. The main difficulty is to securely fasten the tube. To do this, use plasticine or scotch tape.

You can use a vacuum cleaner to clean the headphones, choosing the narrowest nozzle

You need to turn on the vacuum cleaner at minimum power, while it is advisable to open the hole for adjusting the suction power. To clean the headphones, you should act carefully, bringing the tube to the nets one by one, in several steps for 3-5 seconds. Suction with a vacuum cleaner removes residual moisture and softened dirt, that is, cleaning surfaces more efficiently and drying them much faster.

On-ear headphones mostly get dirty on the outside

Other models of headphones (on-ear, full-size, monitor, wrap-around) get more dirty on the outside, since the speakers do not come into direct contact with the skin. Dirty hands are the most common source of contamination. To clean such headphones, it is enough to wipe them thoroughly with a sponge or cloth dipped in soapy water and then wrung out well. The inner surfaces can be treated with a cotton pad with a small amount of peroxide for additional disinfection.

To clean large headphones, just wipe them thoroughly with a damp cloth

We clean non-original types of headphones

The original headset is less common. Users keep trying new models. The goal is to achieve a better sound quality. Regardless of the acoustic preference of the ear, the device is regularly cleaned.

Hydrogen peroxide will help you quickly remove sulfur from your headset. It has a lesser negative effect on the delicate elements of the system.

Set of tools"

Earwax is a protective secretion of the body and is designed to naturally lubricate the ear canal and protect it from bacteria. In the process of chewing food, it is discharged into the auricle and, due to its consistency, easily adheres to the speaker grilles on the headphones. At home, four things are required to remove sulfur from them:

• hydrogen peroxide;
• cotton buds;
• cotton pads;
• wooden toothpicks.

You can buy the necessary products in almost any department store, and a 3% antiseptic solution is sold in pharmacies. Having collected the entire set, you can proceed directly to cleaning.