How to choose a tool box
Next, we will consider the criteria that must be adhered to when choosing an instrument container.
Drawer size
Box size - this parameter allows you to estimate in advance the "weight category" and suitability of the product for a tool of a certain length. Drawer sizes are in inches, but length is the base size. Overall dimensions are usually indicated in millimeters on three sides. To select the size of the box, it is necessary to know in advance the dimensions of the tools that are supposed to be stored in it and their total number. To estimate the size of the future box, you can collect all the tools and make the necessary measurements.
Number of branches
On the one hand, the more compartments there are, the better: you can sort out a lot of small things. On the other hand, a large number of compartments means a small size (for the same product size)
When making a choice for this indicator, one should take into account the type of container. Traditional drawers usually have up to 20 compartments, and organizers can have as many as 30 or even more.
Toolbox compartments.
Sections
The drawer sections are a movable unit divided into several compartments. Their purpose is to make the container as compact as possible when folded, and when unfolded, to provide convenient access to its contents. The sections can be sliding (located at the top and folded in different directions) or sliding (sliding out from the inside like kitchen drawers). The former are more common in traditional drawers, the latter in trolleys and organizers.
Drawer with sliding sections.
Drawer with pull-out sections.
Drawer organizer
It is convenient when the drawer has a built-in organizer, as a rule, it is built into the cover of the drawer. This allows you to store together with a large tool and smaller parts, accessories and fasteners. In this case, the lid of the organizer drawer will contain a set of cells of various sizes. The number of organizer slots varies depending on the number of partitions installed. It is worth remembering the inverse proportion between the number of cells and their volume.
Organizer built into the lid of the drawer.
The ability to change the size of the compartments
Changing the size of compartments not provided in all types of containers, but most often this function is found in organizers and cases. By rearranging the dividers, you can change the size and even the configuration of the compartment, which will allow you to size each compartment to the desired size for the existing tools.
Drawer with sliding sections.
Removable tray
The presence of a removable tray eliminates the need to dig inside the box in search of the right thing. The most frequently used tool can be placed in the tray and quickly used in the process.
Drawer with removable tray.
Recessed handle
The recessed handle is useful in boxes and trolleys - this function allows you to reduce the dimensions of the container, which is very convenient for storage and transportation. Such a box is convenient in that another box can be placed on top, for example, with a power tool. In cases, the handle is a structural element and is rigidly fixed to the body.
Wheels
The transport wheels are designed primarily for trolleys, but they can also be fitted to a large box. The presence of wheels indicates that we have in front of us a capacious container designed to move heavy oversized cargo. There can be one or two pairs of wheels.In the first case, inclined transportation is assumed, in the second - horizontal.
Using the box in a modular system
The meaning of the modular system is that it allows you to put several containers on top of one another, connecting them with special clamps, and thus turn them into one common storage. This feature is not available in all drawers; it is most commonly found in organizers and trolley drawers. If you need to constantly store and transport a large number of tools, then it would be rational to purchase boxes that can be combined into a common system.
Locks material
Material for making drawer locks - here the choice is between plastic and metal. The former is cheaper but less durable. However, this has little effect on the overall price of the container, and although high-quality plastic is a durable material, it is inferior to its metal counterpart.
How to make a kids car organizer
An organizer for a child, and even a portable one, is, in fact, a very convenient thing. For example, on long trips with the help of such a tool and its filler, you can captivate even the most restless child.
The rag organizer for cosmetics is convenient for storing lightweight products
List of required materials for work
You can create children's organizers that are easy to take with you on the road from anything. Most often, fabrics are used for this. Accordingly, you need to add to the list of materials:
- fabric that will become the basis;
- elastic band for fastening;
- material with children's illustrations;
- mesh fabric.
In the niches of the baby organizer, you can store not only toys, but also feeding bottles
Preparation method
You can sew the organizer using a sewing machine or by hand. Let's consider in practice how best to make a device.
- We take the dimensions of the back of the front seat back and cut out the corresponding rectangle from the main fabric.
- Cut out rectangles from material with a children's print and sew them onto the base in a chaotic manner.
- In the upper part we make a mesh insert, sew it from below, divide it into small sections so that small toys can be put there.
- It remains only to sew the elastic bands: one to both upper ends, the second to the lower ones. This will form the loops that slide over the seat and hold the organizer in place.
For those children who prefer drawing, you can take an album and felt-tip pens on the road, putting them in an organizer
Make sure all connections are tight when sewing. They will have to support the weight of toys and accessories.
MK to sew an organizer for needlework with your own hands step by step
- Cut out two rectangles with dimensions from the pillowcase teak
2.With exactly the same dimensions, I cut out one rectangle from the quilted padding polyester. It will serve as a backing, and will give a rigid shape to the base of the organizer.
3. Putting a synthetic winterizer between the pillowcase teak. Layers: teak - sintepon - teak.
4. I fasten all three fabrics together with pins. Now you need to quilt them. I draw a pattern for quilting with a marker (pencil).
5. I sew on a typewriter along the lines. Be sure to bartack at the beginning and end of the stitches so that the stitch does not come loose later.
6. I take the bias tape and smooth one edge of it with an iron.
8. I go around the corners, slightly rounding the bias inlay
9. I overlap the edges of the bias tape.
10. Cutting off excess fabric
11. I fold over the bias tape to the front side. Sew the free edge of the tape to the base of the organizer with hand basting stitches.
12. Sew on the bias tape
Notice how I laid the fabric in relation to the clipper foot. The stitching must go 1 mm
from the edge of the bias tape.
13. I cut out two pockets - rectangles with sides 32 * 13 cm. I sew the upper edges with an oblique inlay. I overcast the rest of the open cuts with an overlock (zigzag).
14. I bend the edges of the pockets 1 cm inward. I'm stitching it on a typewriter.
15. I measure 5.5 cm from the bottom of the organizer base.and draw a line across the marker
16. I attach the bottom pocket to the drawn line, as shown in the photo. I make a fold on both sides.
17. Sew on the bottom pocket on a typewriter, retreating from the edge to the width of the foot.
18. I measure 19 cm from the top of the base. I draw a line with a marker. I sew the top pocket on a typewriter along this line.
19. Flip the details of the pockets face up. I attach the details of the pockets to the base of the organizer on the sides over the existing stitching.
20. I got three pockets at the top and two at the bottom. You can do the same. Or you can come up with your own version.
21. I cut 3 pieces of rep tape. I burn the ends with matches so that they do not bloom.
22. I pin the pieces of tape to the base, fasten them with pins.
23. Sewing tapes on a typewriter on the front side.
24. I insert a wooden pipe into the holes obtained. This is all that I have at hand for now, a pipe from Bethlehem came in handy) I tie a cord to the pipe. Ready!
Sewing an organizer for needlework with Aliexpress with your own hands turned out to be not difficult. For a beginner, this creative process will be interesting, because here you can give free rein to imagination. And the thing is very useful, in the same way you can sew an organizer for shoes for a closet; can be used for masks, gels, shampoos and other things in the bathroom or on the dressing table.
And the thing is very useful, in the same way you can sew an organizer for shoes for a closet; can be used for masks, gels, shampoos and other things in the bathroom or on the dressing table.
Friends, all the information presented on my blog is completely free - and I will be very pleased if you share a link to my article (the share buttons are located below ↓).
What is an organizer, and why is it needed
An organizer is a special stand with compartments (box, drawer), which, as you might guess from the name, is designed to store small things (cosmetics, office supplies, etc.). It helps not only to put things in a pile, but to correctly distribute them according to their purpose, colors. Organizers have become very popular lately due to their widespread use in the West. Today, a wide variety of models are produced for pens and pencils, tools, underwear.
Stationery and other little things fit well in wooden organizers
The organizer itself is a container with cells for convenient storage and optimization of free space. It can be flat and small, or it can be large and roomy. If you plan to buy, you should find out its features or make such a chest yourself. The hand-made organizer looks stylish and fits into the overall interior of the room.
Great solution for the hallway
Fabric wall panel
A panel with sewn-on fabric pockets will help save space and free up the surface of the dressing table, because it can accommodate a large number of cosmetics.
Required materials and tools:
- small scraps of tissue;
- a sheet of cardboard;
- strong threads;
- scissors;
- needle;
- decor: braid, satin ribbon, flowers and butterflies from fabric.
Step-by-step instructions on how to make an organizer for cosmetics with your own hands:
- Cut an oval of the desired size from thick cardboard.
- Sew a cover from the fabric. Cover cardboard.
- Sew a pocket to the bottom of the oval.
- Trim its edge with braid.
- Sew on the loop.
- Decorate with satin ribbon, fabric flowers and butterflies.
If you make a fabric organizer without a cardboard base, then it can easily turn into a travel case if necessary. To do this, just roll it up and tie it with a satin ribbon.
Even a beginner can handle making a hanging or cardboard organizer for storing cosmetics with his own hands. The wooden mini dresser is more durable and roomy, but requires minimal woodworking skills to make it.
Diy jeans wall organizer
This option is similar to that made for a car. For him, ripped or cut pockets are used, which are then sewn onto a piece of denim from old pants. Such a thing helps not only adults, but also children, who may not throw their toys around the room, but fold them neatly into their pockets. This teaches people to be clean and tidy.
Wall mounted denim option
Important! The fabric organizer can also be used in the bathroom. It stores shampoos, toothpaste or combs
For damp places, of course, it is preferable to use maple or leather instead of cloth, as the canvas will quickly get wet from water and steam.
DIY makeup organizer: step-by-step master class
For every woman, everything, even the place in the dressing table, must be properly organized. Organizers are suitable for this, which will help to place an endless series of bubbles and jars in their places. We will create a device in the form of a two-level stand.
Cardboard niches for storing cosmetics are considered one of the most convenient
List of materials to perform
To make a cardboard version of the place for storing your cosmetics, you only need improvised means and nothing else. Usually they are all at home:
- two lids from cardboard shoe boxes;
- bushing from cling film or foil;
- decorative paper;
- glue gun.
Try to prepare niches for items of different sizes.
Various accessories can be used to decorate, including beads, beads, ribbons and more.
Manufacturing instruction
Follow the algorithm very carefully so as not to miss important details in creating a comfortable cardboard cosmetic bag.
| Illustration | Description of action |
 |
The first step is to wrap the covers with decorative paper. For this purpose, you can use wallpaper with interesting colors. We accurately measure the required amount of canvas. We coat the entire surface of the lid with glue stick. Gently smoothing, fix the wrapper |
 |
Let the cardboard dry, then measure the inner width and length of the sides in order to carry out additional decoration. We use paper with a special print |
 |
Measure on the sleeve 20 cm from the edge and mark it with a pen. Cut off excess |
 |
Apply hot glue to the entire length of the sleeve and glue it with decorative paper (you can use a thematic print) |
 |
We take the sleeve, apply hot glue to its edge. Then we glue it to the center of the larger lid. We are waiting for the details to be fixed to each other. |
 |
Apply hot glue to the opposite edge of the sleeve. Installing a smaller cover |
In addition, there are many more ways to make a convenient cardboard organizer, and not only in the form of a chest of drawers, drawers, but also other structures.