Motor-pump "Hooter" MR 25
The most compact and least efficient model in the "MP" -series, which is designed for pumping clean and slightly contaminated liquid. A popular option for domestic needs is pumping water from pools, reservoirs, watering trees. In addition, it can be used for interior work related to construction. This is facilitated by the low noise level, the permissible amount of gas emissions, which do not interfere with the work in the room.
Has a typical device for all gasoline motor pumps:
- motor - 2-stroke single-cylinder piston, equipped with a protective casing for efficient removal of excess heat and forced air cooling;
- pump - self-priming centrifugal pump;
- body - welded metal frame allows it to be carried by hand or transported by car.
- efficient engine;
- capacious gas tank, the first filling of which will last for several hours of work;
- it is convenient to monitor the fuel level thanks to the transparent body of the gas tank;
- manual starter;
- the presence of rubberized supports along the edges of the bottom of the structure;
- on top of the structure - an arcuate handle for upper hand grip;
- small size and light weight.
Technical characteristics of the MP 25 motor pump:
- Power - 1.5 hp;
- Throughput - 0.13 m3 / min;
- Head - 25 m;
- Self-priming from a depth of 8 m;
- Gas tank - 0.7 l;
- Weight - 7.5 kg.
The main characteristics and advantages of the models
MP-25 - economy variant technique. Compact, however, less productive. Pumps clean and slightly contaminated liquids. Often used for indoor swimming pools, watering plants, and indoor work. Differs in low noise, low amount of gas emissions. Consists of a motor, pump and metal housing.
The main advantages include:
- good engine performance;
- the volume of the gas tank is enough for several hours;
- convenient manual starter; solid rubber support for the unit;
- small and light equipment.
MPD-80 - device for pumping dirty liquid... By design, it is no different from other models of the presented company. However, it is characterized by high performance and high power.
The advantages include:
- silent work;
- large volume for gasoline;
- the support is made of steel;
- you can easily remove the pump if necessary.
MP-50 - the model is designed for clean and slightly contaminated liquids. It is considered one of the most productive in its category. It differs in the height of the liquid stream supply, raises liquid from a depth of up to eight meters.
The operating features are as follows. The first oil change is best done after five hours of operation, the second after twenty-five hours of operation, then follow the instructions.
MP-40 is a powerful model that is fuel efficient. This unit requires little gasoline, which is poured into various special compartments.
The model has the following advantages:
- stable steel frame;
- good pressure component;
- takes liquids from a depth of 8 meters;
- manual start is very convenient and compact.
Expendable materials
Consumables for motor pumps include the following equipment.
- Pressure hoses that deliver water from the pump to a certain distance. For example, for watering a garden or extinguishing a fire. Their peculiarity lies in the fact that they retain their strength even at high pressure.
- Suction hoses that draw fluid. For example, from a reservoir to a motor pump. Equipped with sturdy walls made of special materials.
Safety precautions for using Huter motor pumps.
- Read the instructions carefully before using the pump for the first time.The fuel tank must be tightly closed.
- Install the pump firmly on a flat, solid surface.
- If the equipment is used indoors, there must be good ventilation. Check the engine oil level before starting work.
- The pumping part must contain water at the moment the motor pump is turned on.
- Consider the availability of fuel and the period of its filling. Fuel in the tank should not be more than 45 days if the motor pump is not in use.
- The air filter must be cleaned before each use. It is sufficient to clean the fuel filter once a month.
- Remember to check the spark plugs.
