Motoblock brait br-75. review, specifications, owner reviews

Advantages of Bright walk-behind tractors

When developing the unit, all achievements in this area, reviews and wishes of consumers were taken into account. The created walk-behind tractor can perform the most difficult tasks at any time of the year in the most difficult conditions.

The advantages of Bright brand walk-behind tractors are as follows:

1. Large margin of safety. Even under extreme loads, the machine will not bond or deform. The engine runs stably and smoothly. Starting in winter conditions is not particularly difficult.
2. Ergonomics. The machine body has a low center of gravity and is well centered. The employee does not make unnecessary efforts when driving the walk-behind tractor.
3. Multifunctionality. The walk-behind tractor is adapted to work together with almost all types of mounted, stationary and trailed equipment. The unit can be used all year round.
4. Ease of use. All control levers of the walk-behind tractor are located on the steering column. Gear shifting and clutch release are smooth and fast, without jerking or lagging. Noise and vibration from a running engine is damped by special devices.
5. Compactness. The steering column can be folded in or removed for transport and storage. Without wheels, the body of the unit fits freely in the trunk of a car or in a small trailer.
6. Easy to maintain. All manipulations with the engine and chassis can be carried out independently, without the involvement of specialists. Running-in takes no more than 10 hours. Preservation consists in cleaning the unit from dirt and changing the oil. You can store the product in a cold room.

The purchase of any model of the Bright brand walk-behind tractor is a promising and profitable investment. The manufacturer guarantees at least 8 years of service of the walk-behind tractor, subject to the rules of its operation, maintenance and storage.

User manual

Despite the fact that the Bright BR-58A walk-behind tractor is a fairly reliable technique, properly run-in and regular maintenance will significantly increase the service life of the device.

Brait 170F engine

This is especially true of its important components and the engine. Break-in is carried out after purchase or after a long period of inactivity. The main purpose of running-in is to check the operation of all components and lubricate them.

By adhering to the following tips, you can significantly increase the life of the device:

1. Check the amount of oil and fuel in the tanks.
2. Inspect and, if necessary, tighten all fasteners.
3. Start the engine at low revs and let it run for half an hour. This is done so that all parts are running in, and oil gets into all units.
4. Shift gears. This is necessary for a clear understanding of the process of the walk-behind tractor, which, possibly, will prevent the occurrence of breakdowns in the future.
5. Get started, but use the walk-behind tractor at 65% of full power for 20 hours. After the expiration of the term, you can increase the pace and strength of the work.

Additional options

The Brait 80 walk-behind tractor is adapted to work in conjunction with mounted and trailed equipment of domestic and foreign manufacture. This versatility expands the scope of the BR 80 to the level of a modern full-fledged mini-tractor.

The following types of additional equipment can be installed on the BR 75 and 80 models:

• Hay mowers. Motor power 13 HP more than enough to provide enough torque for a rotary mower with two knives. With a working width of 135 cm, the mower clears grass and bushes up to 0.2 hectares per hour.
• Plows. Depending on the specifics of the task to be performed, plows with one or more shares are used.Single-hull tools are used for raising virgin lands, laying trenches and loosening the soil when arranging pits.
• Hillers. On the bracket of the body of the Bright 75, 80 and 105 models, mounted and wheeled hillers are attached. To create and weed beds, disc, arrow hillers are used, capturing 1 or 2 rows.
• Snowplows. Rotary snow blowers and brushes are connected to the PTO shaft. The front dozer with adjustable angle of attack can be used to clean paths and paths.
• Devices for improving cross-country ability. Wheelbase extension is carried out by installing axle extensions and disc pads. You can increase traction with the use of wheel and external weights. For plowing, it is better to use steel lugs.
• Trailers. The most accessible device of this series is the adapter, which allows the operator to control the walk-behind tractor while sitting on the trailer chassis. More complex and expensive units are freight and combined carts. Trailers have 1 or 2 axles.
• Landing kits. You can attach a potato planter and a potato digger to the motoblock bracket and the trailer drawbar. These tools allow you to cultivate up to 1 ha per day

13 horsepower is enough power to power heavy stationary equipment. The walk-behind tractor is used as a drive for the operation of the sprayer, water pump, mulcher and electric generator.

Advantages and disadvantages

When creating a walk-behind tractor, a gear reducer with high performance is used. All power and drive units are designed to work with heavy and dense soils. Even if the base is not too level, it cannot tip over. The hitch is ideally suited for interaction with auxiliary implements from other companies.

Other pluses:

• thanks to the opener, you can adjust the plowing depth of the earth;
• controls are located and designed as conveniently as possible;
• the walk-behind tractor consumes little fuel and demonstrates decent dynamics;
• even if the ground is sour (in spring or after rains), the wheels will definitely pass.

The question may arise about the disadvantages of this brand of motoblocks. Some people consider high prices for spare parts to be quite a significant disadvantage. Users have not yet identified purely technical flaws. Reviews are either purely positive or with reference to a short service life, which does not allow making unambiguous conclusions. Even if individual flaws are found, the advantages clearly outweigh.

Motoblock Brait BR-58a

This walk-behind tractor is distinguished by its reliability and unpretentious maintenance. The set comes with a set of hardened cutters that can handle even the most difficult soils. The Bright br-58a walk-behind tractor is equipped with 4 × 8 wheels with high tread, which are capable of providing the machine's passability on wet soil.

A universal hitch is installed on this walk-behind tractor, which allows the use of attachments from third-party manufacturers: Neva, Cascade, etc.

The Bright br-58a engine is manufactured using Honda technology and is equipped with liner cylinders, which significantly increases the service life of the device as a whole. Also, the motors of this manufacturer are distinguished by improved heat transfer, increased power and performance characteristics.

These machines are equipped with a multifunction steering rod. Its height can be adjusted for each operator. It is also possible to adjust the position of the steering wheel in the vertical plane, which provides better processing of hard-to-reach places.

A photo of the Bright BR-58A walk-behind tractor is presented below

Motoblock Brait BR-58A

User manual

The work of every new owner of Bright walk-behind tractor should begin with familiarization with the operating instructions. It provides a diagram of the start-up of the machine, its application and maintenance.

First start-up instructions

1. Correct start of operation is the key to long-term use of the machine.The assembly should take place clearly in accordance with the recommendations of the user manual.
2. After that, it is necessary to fill in oil and fuel, since they are not included in the factory configuration.
3. After that, for the first eight hours, the Brait walk-behind tractor should be used in a gentle mode for a third of the highest power. This is to ensure that the oil passes through the entire motor and lubricates the engine.
4. At the end of the break-in period, the engine oil must be changed.

Service

In order to keep the Bright walk-behind tractor in working order, it is necessary to maintain it in accordance with the recommendations of the operating instructions.

If the walk-behind tractor is gasoline, then AI-92 or AI-95 fuel should be poured. If the engine is diesel, then, accordingly, diesel. The fuel must be filled in clean, fresh, without sediment and foreign impurities.

If it was used with a minimum load, then it can be replaced once every 50 hours of operation. If heavy loads were transported or virgin lands were plowed, then it must be changed after 25 hours. SAE 10W-40 is recommended as the new lubricant.

The transmission unit must be replaced twice a year: in spring and autumn. Here it is necessary to fill in oils of the Tap-15V or TAD-17i brand.

Correction of basic problems

Brait walk-behind tractors are high-quality equipment, which can still fail over time: it starts pouring out of the transmission unit a little, stalls during operation, or does not develop maximum power. Therefore, each owner should know how to repair the most common malfunctions in the Bright walk-behind tractor:

If the engine does not start:

• Empty fuel tank (refill with fuel);
• Old gasoline is used (try to drain the leftovers and fill in fresh);
• Dirty or faulty spark plug (remove it and visually inspect the condition, check and, if necessary, set the gap between the electrodes);
• Low oil level in crankcase (add engine oil).

If the motor is jerky:

• The contact on the spark plugs is moving away (fasten the wire tightly);
• Water or dirt has entered the fuel tank (drain fuel and clean the fuel system);
• Clogged fuel or air filter (remove and clean);
• Dirt got into the carburetor (disassemble it and wipe all its parts with gasoline).

User manual

Despite the fact that the walk-behind tractor model is quite reliable and has a certain endurance, special attention should be paid to regular technical inspections. Technical inspection of the walk-behind tractor includes:

Technical inspection of the walk-behind tractor includes:

• Securing all connecting elements.
• The tension of the belts and the integrity of the tanks are checked.
• The presence of lubricant in the walk-behind tractor.

At the first start, it is imperative to follow the instructions and run in, which will help extend the life of the walk-behind tractor.

Below are a few points to help you run in correctly:

• Check oil and fuel level, top up if not enough.
• Tighten all fasteners.
• Start the engine at low speeds, which increase gradually.
• Shift gears.
• Start tillage, but use the walk-behind tractor at 50% of maximum power during the day.

Description

The special design of the Brait BR-58A with a perfectly matched center of gravity allows the walk-behind tractor to behave very stable in field work conditions.

Features of the Brait walk-behind tractor BR-58A:

• Equipped with a 7 hp Brait petrol engine.
• With sufficient power and wide pneumatic wheels, the unit can easily overcome difficult terrain, even in off-road conditions.
• All the necessary controls are located on the handle, which greatly facilitates the control of the walk-behind tractor. In this case, the handle itself can be adjusted by placing it in the most comfortable position.
• To prevent dirt and clods of soil from getting on the operator and the power unit of the unit, there are wings on top of the wheels.
• Thanks to a well-thought-out design, attachments can be attached to the walk-behind tractor, with the help of which various operations are carried out, thereby significantly expanding the range of functionality of the unit.
• It should be noted durable materials that are used in the production of the Bright BR-58A walk-behind tractor. The case reliably protects the internal elements from various mechanical damages.
• The gearbox has 3 speeds, one of which is reverse.

Specifications

Motoblocks Brait 68 and subsequent models are manufactured in Russia. The assembly of the walk-behind tractor is carried out from parts produced at domestic industrial enterprises. This makes repairing, maintaining and upgrading the Brait 75 easy and inexpensive.

The units are delivered to retail outlets after passing a multi-stage quality control, bench and field tests. The likelihood of buying a defective product is almost impossible.

Heavy motoblock Bright-105 has the following technical characteristics:

• engine - carburetor, 4-stroke with a vertical cylinder liner;
• power - 7 or 13 hp;
• cylinder volume - 340 cm³;
• cooling - air, forced;
• fuel tank volume - 3.6 liters;
• transmission - gear reducer;
• number of speeds - 3, front (straight and low), back;
• clutch type - disc;
• power take-off shaft - is on the front of the body;
• wheels - rubber, pneumatic 6.00-10;
• weight with filling - 125 kg;
• recommended fuel - AI-95 gasoline;
• fuel consumption - 1.5-2.0 l / h;
• overall dimensions (length / width / height) - 1850x830x1400 mm.

The Brait 135g walk-behind tractor is completed with cutters that provide soil cultivation to a depth of 15 cm. Immediately after running in, the walk-behind tractors can be used as motor-cultivators. The product is accompanied by a technical description, operating instructions, sales receipt and warranty card. A set of tools allows you to disassemble, assemble and service equipment even in the field. The price of various models of a walk-behind tractor is 23,000-30,000 rubles.

Economical models such as the Bright 58 and -68 are equipped with 7 and 9 hp engines, which allows you to reduce gas mileage when performing work at maximum load. So, model 58 consumes no more than 2 liters of fuel when plowing virgin lands.

General characteristics of the collection

This walk-behind tractor is considered to be quite a productive device of the middle price category, which creates little noise. It is noted that it is quite comfortable when performing a wide range of tasks - from moving loads to processing hard soils. Attractive technical properties do not prevent the manufacturer from setting the optimal price for his product. The motoblock shows itself well even off-road. Self-service of equipment does not present any particular problems.

The body is strong enough to operate the walk-behind tractor in any conditions. The handle can be adjusted exactly to the height of the operator. When creating the unit, materials protected from moisture and reliably absorbing noise were used. Summing up, we can conclude that this device is at least not inferior to competitors in the same price category. It is not for nothing that it is in demand among summer residents, farmers, and in the communal sector.

It's interesting: Review of the best models of Chinese motoblocks Aurora

Recommendations for use

It is necessary to start working with a walk-behind tractor by studying the instructions. This will help to immediately establish the correct operation of the unit.

Particular attention should be paid to the scheme of the first start-up of the device and the rules of operation. By neglecting them, you can break the technique without ever using it.

So, the Brait walk-behind tractors need a run-in for 8 hours.After assembling the walk-behind tractor in accordance with the instructions in the instructions, the car must be filled with gasoline and oil, after which it is left to work for 8 hours, setting the power to only 1/3 of the maximum possible. This helps to oil all the parts inside the engine.

A very important condition for a long and successful operation is clean, high-quality fuel and timely oil change in the engine. At low loads, it is changed after 50 hours, and at overloads - after 25. In the transmission, it is changed 2 times a year.

In the event that the car starts to junk, work intermittently, there is a high probability of clogging the carburetor. This unit must be carefully removed, blown out, wiped with gasoline and assembled. If other obvious faults occur, such as reduced driving speed, contact your dealer for service. Do not neglect it for prevention purposes.

Auxiliary elements

Attachments are not included in the basic delivery set. But it can be installed additionally, taking into account only your needs.

To do this, use:

• various plows;
• devices for planting and collecting potatoes;
• haymaking installations;
• soil hooks;
• trailers (light cargo carts);
• hillers;
• grass mowers;
• pumps for water;
• snow plows.

It is necessary to buy lugs without fail. Even the best wheels will slip without their support. The choice is extremely simple - you just need to tell the sellers which model of the walk-behind tractor you need hooks for. As for the cutters, the saber-shaped variety is most often found in the delivery set of motor vehicles. Then it will be possible to disassemble this cutter and sharpen or replace the problem part.

But saber-shaped structures are suitable only for work on soft ground. If the ground is solid, you need crow's feet. Most often they are bought when potatoes are planted on the site.

Potato diggers can be used to harvest other root crops as well. The fan-shaped apparatus is usually cheap, but its effectiveness is low.

Important: for processing small areas where you can harvest the crop with your own hands, such a device is optimal. Vibration mechanisms have a significant advantage - much less tubers are skipped.

Such a potato digger lifts the entire layer and sifts it carefully.

The role of motoblocks is also great when cleaning sites from snow and dirt. If the unit is equipped with a powerful motor, snow drifts can be removed using a shovel-blade. The snow plow is even more powerful. When driving, the auger captures the snow, directing it into the bell. If there is very little snow, you can use a sweeping brush, it also removes foliage, debris and various dirt.

Regardless of the size of the farm, a trolley (trailer) is useful, because everyone has to move various loads.