Review of the range of agate walk-behind tractors. characteristics, reviews

Agat Salute 5

The device of the Agat Salyut 5 walk-behind tractor:

The reliable universal machine is equipped with a 6.5 hp Lifan engine and is capable of processing plots of up to 50 acres. The Chinese motor is rationally adapted to various temperature conditions. Modification advantages:

• The transmission is represented by a V-belt transmission with a tension roller, a gear reducer, provides 4 forward / 2 back gears.
• Good stability due to the low center of gravity.
• Undemanding to fuel quality.
• Economical consumption of gasoline.
• Low vibration and noise.
• The ability to connect a variety of accessories.
• Easy assembly and disassembly of wheels and steering.

Agate BS-1

On a multifunctional walk-behind tractor with a capacity of 6.5 hp. installed American engine Briggs & Stratton (Vanguard 13H3). The machine has an electric start and is equipped with a mechanical decompressor system.

Agate BS-1

It is used for processing land plots up to 50 acres, performing a variety of economic and transport works. Depending on the number of cutters installed, it provides a cultivation width of 35/60/80 cm to a depth of 25 cm.

Agate L-6.5

Gasoline walk-behind tractor Agat L-6.5 with a Lifan 168F-2 engine with a power of 6.5 hp. intended for processing of medium-sized areas in intensive mode. The four-speed transmission provides 4 forward / 2 reverse speeds.

Agate L-6.5

The presence of a PTO allows the use of trailed and active attachments. The width of capture when processing with milling cutters is 0.9 m. The model is one of the most demanded in the Agates line.

Agat-BS-6.5

This Agat model is equipped with a Briggs & Stratton RS engine (USA). Despite the small weight of 78 kg., Agat-BS-6,5 effectively works with additional guns throughout the year, can carry loads weighing up to 0.5 tons. Has an adjustable steering wheel, speeds 4 forward / 2 back.

Agat-BS-6.5

Thanks to a special module, the walk-behind tractor easily turns into a four-wheel mini-rider.

Agat-BS-5.5

Multifunctional unit with a 5.5 hp Briggs & Stratton Intek PR0206 motor, has 2 forward speeds, 1 reverse. Available aggregated with a variety of trailed mechanisms.

Agat-BS-5.5

Agate-X

Motoblocks Agat of the X series with Japanese Honda engines are universal small-sized machines for performing a variety of agrotechnical, communal, and household works.

Agate-X

The Agat modification with a Honda QHE4 engine has a power of 5 hp. Versions have been developed that are equipped with 6 hp HONDA GC 190 engines. and HONDA GX 200 with 6.5 hp. The machines have 4 forward / 2 back gears, a power take-off shaft, and are equipped with four cutters.

Agate-5P6

This Agat modification is equipped with a powerful Japanese Subaru Robin EX170D 5.7 hp engine. The unit has 2 forward / 1 back gears, 2-belt clutch, adjustable steering column. The working width is 90 cm with a depth of 30 cm. The self-propelled machine effectively performs agricultural work on areas of 20-25 acres, is optimally aggregated with additional tools for performing household and other works.

Agate-5P6

The considered modifications of Agat walk-behind tractors are the most popular. In addition, versions of machines have been created that differ in special characteristics. In particular, in addition to the listed engine models, motors of other brands are installed - Zongshen, Hammerman (Hammerman).

Agate HMD

Diesel units Agat KMD with German Hammerman CF178F engines are produced in 2 versions with a capacity of 6.5 hp. and 5.5 hp, have 4 forward / 2 back gears and are capable of working the land to a depth of 35 cm.According to the owners, they are extremely effective for intensive use in medium-sized areas, in any climatic conditions.

Agate HMD

Agate ZH-6,5

This model has recently appeared on the market. The design does not differ from previous models. Equipped with a 6.5 hp Zongshen ZS168FB 4-stroke petrol engine. The volume of the fuel tank is 3.6 liters.

The depth of processing by milling cutters is 250 mm, the width is 350-800 mm. The mass of the walk-behind tractor is 82 kg.

The unit has a horizontal PTO, spark ignition and air cooling.

Motoblock Brait BR-105

The Brait BR-105 walk-behind tractor is equipped with a 4-stroke gasoline engine with a power of 7 hp. and is intended for use on a plot of up to 60 acres.

Motoblock Brait BR-105G (4 * 10)

Thanks to its design, the device easily copes with soil cultivation.

The main characteristics of the Brait-105 walk-behind tractor:

• The transmission has 3 speeds, including 1 rear, which allows you to return to the skipped sections without turning.
• The depth of soil cultivation varies from 15 to 30 cm, and the row width is from 80 to 120 cm.
• The weight of the device is 110 kg, which eliminates the need to purchase additional weights.
• The frame is made of a special cast-iron alloy, which gives additional structural reliability and compares favorably with aluminum counterparts.

Brait BR-105G (4 * 10)

Motoblock Brait BR-105G 7 hp (wheel size 4 * 10) is the most powerful member of this series and is designed to work on large areas with dense soil.

Brait 170F engine

Thanks to powerful Brait engine and the use of attachments, the soil can be cultivated, plowed, watered, etc.

Features of the Brait 105G walk-behind tractor (4 * 10):

• Powerful 7 hp Brait-170F engine
• The gearbox has 2 speeds forward and 1 reverse.
• Fuel consumption is about 2 l / h, and under heavy load it increases slightly.
• Reliable fixation of cutters, lugs and wheels is carried out thanks to the axle of the gearbox, made in the form of a hexagon with a diameter of 30 mm. This prevents the elements from being rotated.
• The set includes rotary tillers that provide processing of a row up to 100 cm.
• The price of such a model is about 35 thousand rubles.

Specifications

Brait BR-105G (19 * 7 * 8)

Motoblock Brait BR-105G NMB (wheel size 19 * 7 * 8) with wide wheels compares favorably with its previous brother, as it has greater stability on the ground.

Motoblock Brait BR-105G (19.7.8)

Features of the Brait 105G walk-behind tractor (19 * 7 * 8):

• Wheels with a size of 19 * 7 * 8 with embossed tread are designed for off-road driving and sticky soil.
• An S23 hexagon is used for the cutter shaft, which allows them to be securely fixed.
• Due to the wheels, the total weight of the model is significantly increased to 120 kg.
• The model is equipped with a Chinese-made Lifan engine with a power of 7 hp.
• Starts quickly and easily thanks to the manual starter.
• Convenient gear shifting allows the operator not to be distracted from work.
• The price of such a model is about 26 thousand rubles.

Specifications

Motoblock Brait-105G (9.0)

Features of the Brait 105G walk-behind tractor (9.0 hp):

• Equipped with 9 hp Lifan 168FAE diesel engine.
• The gearbox has 3 speeds, including 1 back. The capacity of the fuel tank is 3.5 liters.
• The presence of an electric starter allows you not to put any effort when starting the engine.
• The size of the wheels is 5x12, which provides sufficient cross-country ability on any ground.
• The weight of the model is 138 kg, which allows you to work without weights.

Operating tips

Before starting to carry out any agrotechnical work, it is very important to "roll" the walk-behind tractor. This is done before the main operation in order to prepare the unit for further loads.

Run-in should be done for about 7-8 hours with a minimum load on the walk-behind tractor.

It is very important not to forget about the maintenance of agricultural machinery. So, before using a walk-behind tractor, you need to check the oil in it, it is important to do this constantly, fastening bolts and pressure in all tires

After the completion of agrotechnical work, the unit must be completely wiped and cleaned of all kinds of contamination.

If the walk-behind tractor is sent for long-term storage, then it is very important to prepare it in advance. Drain all fuel, oil, lubricate all parts and assemblies, check valves

It is very important not to forget about routine maintenance. Sometimes you have to replace certain parts that fail over time.

So, replacing oil seals in a gearbox is not always possible for beginners, as a result of which you still have to contact specialists who can also check the clutch cable and adjust the accelerator if it does not work correctly.

Model rating

Next, we will consider the rating and the main modifications of motoblocks that can be purchased from the Russian-Chinese brand.

Enifield "Titan MK-1000"

A gasoline walk-behind tractor has the following characteristics:

• four-stroke engine with a capacity of 7.0 liters. sec., only 3 speeds (two forward and one backward);
• weight about 90 kg.
• engine oil is suitable for refueling, fuel tank - 3.6 liters;
• the number of cutters - from 6 to 8;
• the working width is 100 cm and the depth is 35 cm.

Composite knives are included, and the walk-behind tractor is equipped with a manual and electric starter.

The average price is 25 thousand rubles.

But also in the assortment of the brand you can find an equally multifunctional walk-behind tractor.

"Titan 1610"

Specifications:

• weight is just over 150 kg, power is 16 liters. with., there is air cooling;
• tank volume - 6.5 l;
• drive type - geared;
• 3 gears (two forward and one reverse).

This walk-behind tractor is started manually. For this walk-behind tractor, additional equipment (mounted) can also be used.

The average price is about 40 thousand rubles.

"Titan 1810"

The motoblock weighs a little more than the previous model - about 160 kg, and also:

• has a capacity of 18 liters. sec., tank volume - 6.5 liters;
• 3 gears (two forward and one reverse) and air cooling;
• is started manually.

This walk-behind tractor is considered one of the most relevant and demanded in the range of the brand.

This model uses an advanced and economical fuel delivery system. The average price is 44-45 thousand rubles.

"Titan 1100"

We recommend that you pay attention to this walk-behind tractor with an engine power of 10 liters. with

It belongs to the heavy class, but has attachment support. There is an electric starter, 3 gears and reverse.

As for the "Titan 1110", it is also air-cooled, with a capacity of 9 liters. with. and gear drive. Technical characteristics practically do not differ from other related models from the range.

Models of motoblocks from the TN 16 PRO and 850 PRO brands, which run on gasoline, can be no less high-quality. Their coverage area is almost 100 cm. The steering column can be adjusted both horizontally and vertically.

Motoblocks from the brand can be an excellent alternative to many other options, for example, Hortmasz CJD-1002 and X-GT65, since Titan has even more gears, and they are much better in terms of characteristics.

Models

The range of the company's products is wide enough and includes more than 13 models. The entire range of motoblocks of the brand is equipped with four-stroke gasoline engines of German and Japanese production with air cooling and manual start. All models include a forged steel tiller, oil and latex coated gloves. Many products have a headlight.The most popular models are the following.

• SL-82B is the simplest and cheapest model of the company, which allows processing plots of up to 20 acres. In fact, it is a transitional link between a cultivator and a traditional walk-behind tractor and is characterized by a mass of 90 kg, a 7.5 liter engine. with., 2 forward and 1 reverse gears.
• SL-93L - a walk-behind tractor with an engine power of 9 horsepower, 3 forward gears (one of them is lowered, which allows you to process even the most difficult soils) and 1
• back. Product weight - 121 kg. Such characteristics make it possible to use this technique for processing plots up to 50 acres.
• SL-144 - 14 hp engine with. and a weight of 163 kg allows you to use this walk-behind tractor for plots of 80 acres.

• SL-151 - the power of the walk-behind tractor is 15 liters. with. with a mass of 163 kg. The design uses differential swivel wheel hubs, which greatly facilitates maneuvering. This technique is used for plots of more than 80 acres.
• The SL-184 is a powerful tool with an 18 horsepower engine and a weight of 175 kg. Has 2 forward and one reverse gears. To increase controllability and cross-country ability, differential pivoting hubs are used in the design.
• SL-184L is a variant of the previous model with a low gear. This is the most powerful and expensive product of the company, intended for large farms (about 100 acres).

Do-it-yourself walk-behind tractor repair Farmer

All problems in the operation of the walk-behind tractor device The Farmer can be divided into problems associated with the engine and other units.

For example, in order to solve problems with the gearbox, you need to adjust the carburetor. This requires:

1. Check the oil level in the housing.
2. Disassemble the housing in half, inspect the chain and gear for defects.
3. Check chain tension.
4. It is recommended to wash all parts of the gearbox in kerosene.
5. Replace damaged parts.
6. Assemble the structure back.
7. Change the gasket.
8. Before installing the structure on the unit, it is recommended to turn the gearbox shafts manually. Fill it with lubricating fluid.
9. Adjust wheel hubs.
10. Restart the walk-behind tractor, but without attachments.

A feature of all Farmer models is the availability of components on the market, so the user can carry out repair work on his own.