Current assortment
There are several hedge trimmers in the Husqvarna range to date. Let's take a closer look at all models and their technical characteristics below.
Petrol brush cutter 545FX. Designed for mowing grass and undergrowth, especially hard ones. This tool has a 2.8 hp two-stroke engine. with. Vibrations are damped by special equipment with devices that make working with this brushcutter as comfortable as possible. The engine starts without jerking. The advantages of this model also include an adjustable handle and easy throttle control. The manufacturer uses a fuel pump to facilitate starting.
Specifications include:
- bevel width, which is 24 centimeters;
- landing diameter - about 25 mm;
- the spindle speed is 9 thousand revolutions per minute;
- weight about 8.5 kg;
- the drive shaft is rigid;
- the lubricant is biodegradable.
The average price for this model is 43.5 thousand rubles.
We will also consider the second model from the brand - 555FX. This hedge trimmer is designed for cutting small trees and shrubs. Equipped with an innovative engine without harmful emissions. Moreover, it is very economical in gasoline consumption.
This model starts very quickly thanks to the "smart start" system, while the cord resistance is reduced by almost 40 percent. There is an anti-vibration system. For maximum comfort and convenience, this model has a very ergonomic handle.
Specifications include:
- bevel width - 23 cm;
- landing diameter - about 25.5 mm;
- spindle speed - 9 thousand revolutions per minute;
- there is no collapsible shaft, and the drive shaft is rigid;
- weight is about 9 kg;
- the lubricant is biodegradable.
The average price for this model is about 69 thousand rubles.
Summing up the two models, we can say that they are very similar, with the exception of some technical characteristics. The second model is more powerful, its price is higher. As for the equipment, they are identical. It includes a Balance X T harness and a bicycle handle.
Care and storage of the Husqvarna hedge trimmer
As with any garden technique, hedge trimmers must be properly cared for. So, after each use, they must be cleaned of dirt, dust and other various kinds of accumulations.
A hedge trimmer that you do not plan to use in the near future is very important to place in a dry and, most importantly, warm place. If the place is damp and humid, then there is a risk that corrosion will begin to appear on the instrument, which can lead to irreversible consequences
The gearbox needs to be lubricated sometimes, especially if the brush cutter is used frequently; do not forget about the gearbox assemblies, which also sometimes need tightening.
Gasoline brush cutter "Husqvarna" rarely breaks down. In order for the unit to serve longer, it is necessary to clean it from dirt, dust and accumulations of plant material before and after each work process.
Important! Store in a dry, warm room. High humidity can corrode device components
Also, the service life can be extended if you strictly follow the recommendations and instructions of the manufacturer. For example, do not exceed the maximum recommended no-load rpm (13,000 rpm for most models).
Husqvarna manufactures powerful, balanced and reliable hedge trimmers.With their help, you can not only give a beautiful shape to the bushes, but also remove branches in any, even hard-to-reach places. They are especially useful for those who have a hedge on their personal plot.
Spare parts and components
The standard set with the brush cutter includes instructions for correct operation, a disc for the brush cutter, a wrench for assembly, a transport cover and a harness. Depending on the model, the kit may differ, this information should definitely be checked with the manufacturer. However, the latest new models - the 545FX and 555FX - are exactly the same.
As for spare parts and parts that have to be changed over time or they may fail, it should be noted here that they should only be purchased from trusted and licensed suppliers who sell original products from the Husqvarna brand. You should definitely contact service stores if they are available in your area. It will not be difficult to purchase a piston, a new disc or trimmer attachments. The price will depend on which category the part is needed from. Discs, for example, cost about 1 thousand rubles, but the blades can cost more - about 2.5-3 thousand, but they are enough for a long time; a trimmer attachment will cost around 5-6 thousand, but it rarely breaks and becomes unusable.
What are they
Brush cutters are considered to be quite multifunctional devices that help to clear the forest and cut off any bush plantings, including artificial ones. Brush cutters from the brand are designed in such a way as to be able to work with their help throughout the day.
Husqvarna hedge trimmers have many features, including an easy and quick start and further acceleration. Fuel costs are minimal due to the fact that the engine of this technique, as a rule, is a two-stroke with a gearbox. The manufacturer cares about future customers and therefore provides a complete set for the purchase, which simultaneously includes several types of discs, for example, for cutting young trees and branches. Also included with the brush cutter is a set of special cutting equipment.
The brush cutter is very convenient for both professional and home use. Even beginners can easily handle it. The brand's products are manufactured in Sweden, which is an undoubted standard of quality and durability of technology. Brush cutters from the brand meet all international quality criteria, are made only of high quality materials.
Description of the device of the Husqvarna brushcutters
The Husqvarna hedge trimmer can be used as a garden shear for cutting artificial shrubs. It is also a professional forest clearing tool. Designed for tough work in forest plantations. Designed specifically for all-day use.
Differs in easy start and fast acceleration. Fuel consumption is reduced by using a two-stroke geared engine. The set includes a special disc for cutting young trees. The brushcutter comes with a set of cutting equipment and harness. The handle of the device is T-shaped.
Husqvarna Brush Cutter