Slime from gelatin

What to do if the slime did not work

A common problem when creating slimes is the wrong combination of proportions. There are several ways to solve it:

  • If the slime sticks to the hands and cannot get the desired consistency, it must be sent to the refrigerator or an additional amount of ingredients must be added.
  • If it contains starch, toothpaste, or gelatin, cold can improve the situation.
  • You can make the slime thicker with soda, starch or boric acid.
  • To improve the ductility, the slime is placed in a microwave oven and stirred again.
  • If the mass has collected the villi, various small objects, the microwave will also help to remove them. It is much easier to remove foreign objects from the heated mass.
  • Loss of elasticity due to improper storage can be prevented by placing the mass under hot water and adding a small amount of baking soda.

How to store and play with gelatin slime?

Slimes made from different ingredients have a different lifespan. Products made of gelatin and glue are considered durable and practical. The lifespan of the slime in this case is almost 30 days. The jelly slime does not need to be stained as it cannot be washed. Gelatin from water will melt and lose its astringent properties.

Substances from the glue are resistant to water. In order for the slime to serve for a long time, it is recommended to store it in the refrigerator in a sealed package. You need to play with mucus with clean hands and not taste it.

Flour slime is stored less, but it can be eaten and restored in case of destruction. Natural slime can be played by children under 5 years of age. If parts of the toy get into your mouth, nothing bad will happen.

Rules of care for gelatin slime

Gelatin-based slimes deteriorate quickly, so when using such toys, you should follow some rules for caring for slimes.

Plasticine-based slime, if stored properly, can be used for about 8-12 days.
A shampoo-based slime will retain its properties for 5-8 days.
The starch-based toy is usable for 15 days.
The slime must be stored in a plastic container, so it will be protected from the negative effects of environmental factors such as air and sun.
The slime box should be kept in the refrigerator while the child is not playing.
Slime does not need to be played in a dirty room or outdoors, otherwise dirt and foreign bodies will get into it, and it will become unusable.
The most important rule! After the child has played with the slime, be sure to wash your hands with soap and water.

Self-made jelly slime is a great toy for a child. It is even better if the kid cooked it on his own. Slime is made from simple and cheap materials, so it won't hit your wallet. The result will delight all household members.

PreviousWhat kind of soap is suitable for making slime? How to make a slime and take care of it? NextHow to make a slime from PVA glue, what remedy can you use? Toy storage and care rules

How to make a magnetic slime

If you want something unusual, then we advise you to use this recipe. Slime will be attracted to the magnet if brought to it. You can also add phosphoric paint to the slime and the slime will begin to glow in the dark.

If interested, then follow this recipe:

Take a mug of water and mix it with sodium tetraborate ("boron").
Mix well so that there are no lumps or grains of sand left.
We take the second plate, PVA glue (30 g) and a glass of water. Mix everything again. Be sure to mix the amount that we indicated, otherwise nothing will work.
Then pour in the food coloring.
If you want to get a luminous slime, then you can mix in phosphoric paint.
Pour the mass from the first cup into the second, stirring occasionally

Pour in carefully.
Pour in, stir and watch the thickness of the slime. When the thickness suits you, then stop adding the second mixture.
Pour iron oxide into the middle of the mass.
Mix thoroughly until smooth.

Well, that's all - it's done. Move the magnet and the slime will be pulled towards it. Magic!

You can also make a slime according to the recipe from this video:

With tetraborate

Instead of cream, you can use body milk in the recipe. It is better to take a thick shampoo. It is advisable to put all the listed components in order for the toy to acquire the necessary texture. The activator is prepared by mixing 200 ml of water and 2 tsp. sodium tetraborate.

What to make original slime

  • 4-5 st. l. PVA glue,
  • 0.5 tsp oily cream
  • 1 tsp shampoo,
  • 1-2 peas of toothpaste
  • 0.5-1 tsp diluted sodium tetraborate.

Cooking method

  1. The main component is glue, it is sent to a plate.
  2. A nourishing cream is squeezed out there.
  3. And they also add shampoo to make the slime "click".
  4. For greater softness, the composition should contain toothpaste.
  5. It's time to mix everything thoroughly.
  6. The activating solution is added last.
  7. It remains to knead the mass with a spoon until it curls up.
  8. At this stage, the slime remains sticky, so knead it with your hands.

From dishwashing detergent and bath foam

A working recipe for a shiny airy slime without glue includes not quite traditional ingredients.

Reference. "Neon" gel with glitters is colorless in itself, and a huge number of glitter of various colors that make up it gives it a delicate color. The gel is produced by the Luch plant in tubes of 5 and 10 ml. Sold in stationery stores.

To make this slime, you need a container or jar with a tight-fitting lid. The recipe, which seems to be without sodium tetraborate, still contains this substance. It is found in small amounts in contact lens cleaner.

  1. Pour into a container 5 ml of thick dishwashing gel, 5 ml of bubble bath and 8 ml of water.
  2. Close the container and shake it until the contents turn into a homogeneous foam.
  3. Dissolve 3 pinches of baking soda in the foam.
  4. Pour in 1 tsp. tooth powder and use a spatula to distribute it throughout the volume.
  5. Pour in 50 ml of "Neon" gel and stir until the streaks disappear.
  6. Add 50 drops of contact lens cleaner and stir each portion until the mixture thickens and begins to stick off the container. There will be no more than 4 such additions.
  7. Remove the mass from the container and knead with your hands until tender.

Foam free with soap and water

In this recipe, make foam, that is, you need to perform steps 5-7 at least 3 times to make the toy lush. The sodium tetraborate solution must also be injected in several portions. And between the additions of the thickener, it is imperative to mix the composition well.

What slime should be made of

  • 5 tablespoons of PVA glue,
  • 2 spoons + 2 spoons of water,
  • 0.5 tablespoons of hand cream,
  • a few drops of food coloring
  • 2-3 st. l. liquid soap,
  • a few drops of an aqueous solution of sodium tetraborate.

How to make at home with your own hands

  1. Put the glue in a deep bowl, dilute with half the specified volume of water.
  2. Add cream to the composition.
  3. Paint the future slime.
  4. Mix everything until a uniform shade.
  5. Pour liquid soap and the remaining water into a plastic bottle.
  6. Close container and shake to create foam.
  7. Pour it into glue, mix the mass a little.
  8. Add activator.
  9. Knead the slime with a spatula.

How to make a slime from soap and salt

This is a very simple recipe, especially since all the ingredients can be found in any home. To do it, we need:

  • Liquid soap.
  • Extra fine salt.
  • Soda.
  • If the soap is colorless, you can add dye if desired.
  • Mixing container, rubber culinary spatula (most convenient for stirring).

Sequencing:

  • Pour soap into a plate, preferably baby.
  • If you are using a dye, add it to the soap and stir well so that the mass is evenly colored.
  • In a separate bowl, mix the baking soda and salt in equal proportions. We make sure that there are no lumps.
  • We begin to gradually pour the dry mixture into the soap and stir constantly.
  • You should get a matte viscous mass.
  • The last stage is cooling. We put our slime in the refrigerator for forty - sixty minutes.

We advise you to watch the video instruction:

You need to store such handgums in the refrigerator after playing. In the cold, it regains its stretching properties.

A simple recipe for jelly slime

At home, a sticky toy is made from plasticine and gelatin. At the first stage, 20 g of powder is diluted in a deep bowl, diluted by ¾ with water. The mixture will be suitable for sculpting in 60-65 minutes.

At the second stage, plasticine is crumpled and crushed. Then it is poured with ¼ glass of water. In order for the plasticine to evenly mix with the liquid, you need to knead the composition for a long time and thoroughly. This can be done both with gloves and with a kitchen brush for smearing pastries.

According to the recipes, you should put the container with the swollen gelatin on a slow fire and wait until the grains dissolve in the liquid, stirring regularly and not boiling, as the substance will become unsuitable for creating a slime.

At the last stage, gelatin is poured into water with plasticine. Once the ingredients are mixed, they are placed in the refrigerator for 35-45 minutes. This is required in order for the substance to freeze. The service life of the gelatin-plasticine slime is from 7 to 30 days.

From Nutella and condensed milk

This sweet tasty slime similar to plasticine is suitable for playing and for sculpting figurines, which you can later eat with pleasure. To make it, you need a Teflon-coated pan.

  1. Pour 200 ml of condensed milk into a frying pan, place 1 tbsp each in the same place. l. starch and Nutella.
  2. Heat a skillet over low heat with constant stirring.
  3. When the mass thickens, remove from heat, cool and knead.

All the recipes given are tested and working. But in fact, there are a huge number of known ways to make slime without PVA glue and sodium tetraborate. But there are even more ways, so far unknown. However, it is enough to turn on your imagination, to understand what happens when different substances are combined and - voila` - a new original recipe for lizun without sodium tetraborate is ready.

Preparation for making slime

Slime is formed by a chemical reaction of several ingredients. To make it, you need to have components according to the recipe, containers for mixing them, a plastic spoon.

Dyes can stain furniture, leather and clothing. Therefore, before starting work, cover the table with oilcloth, put on an apron, sleeves, gloves.

Some types of adhesives and medicines have a strong odor. When using them, it is better to be outdoors or in a well-ventilated room. Make sure that children do not inhale powdered ingredients, get hurt by glitter, or wet clothes with cool water.

The recipe for many types of slime is so simple that even children can make a toy. Invite your child's friends, prepare them ingredients, various dyes and decor (glitter, beads, foam balls). Explain how to make a slime and make sure it is made correctly. After that, the kids can arrange competitions, come up with stories with their toys.

The best gelatin slime recipes

It is easy to find three types of gelatin on sale - powder, granular, sheet. Working with sheet gelatin is a little easier, since it excludes the possibility of dilution in an excess amount of water - the excess liquid can be easily drained. But in general, the type of product does not affect the process itself, how to make a slime from gelatin.

The texture of the slime is influenced by such an indicator as the strength of gelatin. The stronger the food product, the denser in consistency the mass will become. This parameter is measured in blooms and for edible gelatin, depending on the manufacturer, it can be 125-265 bloom.

The difficulty in how to make a slime from gelatin lies in the selection of a food product of the desired strength. If you have not succeeded in any of the recipes below, it is likely that a food that was too weak (if the mass did not thicken) or strong (the mass became "rubbery") was used. It is recommended to repeat the recipe, but with a different strength of gelatin.

Slime with light plasticine

Light plasticine is an excellent basis for home antistress, the mass is almost ready for use, but it will not require thickening, but softening. If the plasticine is simply mixed with water, then there is a possibility that the mass will simply disintegrate into separate lumps. Gelatin will help to "collect" the composition together:

Ingredients:

  • gelatin - 15 g;
  • water - 150 ml;
  • light plasticine - 10 g (1 pack)

How to make gelatin slime:

  1. Prepare the gelatin mixture as indicated on the food packaging.
  2. While the gelatin solution cools, knead light plasticine well in our hands.
  3. Stir plasticine and 50 ml of room temperature water in a bowl.
  4. We mix plasticine with a gelatinous composition until a homogeneous composition is obtained.
  5. We remove the finished mixture in a cool place for 30 minutes.

The resulting slime is pleasant to the touch, stretches a little and crunches, but does not click, and yet, if the game is too active, the antistress will easily break.

Slime with detergent

Instead of dishwashing detergent, you can use another foaming agent - shampoo, bubble bath, or others. This ingredient adds elasticity to the texture. But the recipe itself, how to make a slime with gelatin, is rather ambiguous, since it is difficult to choose the proportions to get the correct antistress in consistency: with a small amount of gelatin, you get a finger-like texture, which still sticks to your hands, and if you add too much thickener, then the slime will get lost in hendgam. You can try to get rid of the stickiness by adding a pinch of baking soda to the composition.

Ingredients:

  • dishwashing liquid - 1 tbsp;
  • gelatin - 15 g;
  • water - 100 ml

How to make a gelatin slime with detergent:

  1. We make a gelatinous solution, as it says on the package.
  2. Pour the detergent into the working dishes and stir well until a light airy foam forms.
  3. Add a gelatin solution in a 1: 1 ratio to the soap composition and mix well.
  4. Leave the mass to thicken in the refrigerator for at least 30 minutes.

Depending on the blowing agent used, a different amount of gelatin solution may be required. It is quite difficult to find the required proportions, so the recipe for slime with gelatin is classified as complex. To make it easier to experiment, it is recommended that you take a thick detergent and start with a small amount of gelatin solution.

Slime with toothpaste

Another recipe for lizun at home from gelatin is with toothpaste. The complexity of its implementation also lies in the selection of the amount of ingredients. The amount of gelatin solution added will depend on the desired antistress consistency. It is recommended to start with a ratio of 1: 1.

Ingredients:

  • toothpaste - 2 tablespoons;
  • icing sugar - 1 tsp;
  • gelatin - 15 g;
  • water - 100 ml

How to make a slime with gelatin and toothpaste:

  1. Preparing a gelatinous solution.
  2. Thoroughly mix the toothpaste with powdered sugar and send it to the microwave to warm up for 10 seconds.
  3. Let the dental mass cool down and only then pour a gelatin solution into the composition in a thin stream.
  4. Mix the mixture well and let it cool for at least 30 minutes in the refrigerator.

If the resulting slime consistency does not suit you, you will have to redo the anti-stress completely. It will not work to modify the frozen composition.

Note! In the recipe for how to make a slime from gelatin and water with toothpaste, you can also use granulated sugar, but in this case, you will have to spend more effort on mixing the composition.

How to make a toy based on it?

Homemade slime using gelatin is very easy to make, so everyone should try it. In addition, there are no ingredients harmful to health in the recipe, so there is no need to be afraid that the child will take it in his mouth. For slime you will need:

  • three packs of edible gelatin;
  • corn syrup;
  • hot water;
  • food coloring of any color.

During the preparation process, the gelatin powder must be dissolved in hot water and allowed to brew. Then add a little corn syrup, color dye and mix everything thoroughly. The combination of elements leads to the appearance of stretching strands that look like natural mucus.

Changing the amount of syrup will transform the texture: the more syrup, the more elastic the slime will be.

With plasticine and water

To obtain a soft slime with a long shelf life, use children's plasticine for creativity. The recipe includes:

  • 100 g of plasticine, preferably for children, as it contains a minimum of hazardous dyes;
  • food gelatin packaging;
  • 250 ml of cold tap water.

To mix all the ingredients, you will need inventory:

  • plastic plate;
  • stirring paddle;
  • metal container for heating gelatin powder.

The cooking process can be conditionally divided into several stages.

  1. First, gelatin is soaked in 200 ml of cool water and left to swell for about an hour.

    It is recommended to knead in a metal bowl so that at the next stage you can warm up the mixture.

  2. After an hour, the container is placed on the stove and heated over low heat, while constantly stirring. The gelatin mixture should warm up but not boil.
  3. The bowl is then set aside to cool.
  4. The plasticine is thoroughly kneaded, a piece is separated and placed in a container, pouring with the remaining water.
  5. Put in a water bath and keep until completely softened.
  6. The plasticine mixture is combined with cooled gelatin.
  7. Then all the ingredients are thoroughly mixed, covered with a lid and refrigerated for half an hour.

The result is a soft slime that can be stored for a long time and used repeatedly during games.

With "Fairy"

In the absence of plasticine, slime is even easier to prepare. However, such a toy will contain ingredients hazardous to health, so it is not recommended to give it to a child under three years old. For the recipe you will need:

  • 150 ml "Fairy", any other liquid for washing dishes or bath foam;
  • a teaspoon of gelatin.

At the same time, food coloring is not added, since the liquid for the dishes has a color and contains a variety of fragrances.

  1. Gel for washing and gelatin are added to the container, stirring with a wooden spoon.
  2. The combined ingredients from the recipe are left for 3-4 hours at room temperature, stirring occasionally. Then they are placed in the refrigerator for a few more hours.

Store the toy in a plastic bag or container. In this case, the game with slime can be enjoyed for several days.

With shampoo

Gelatin mixed with shampoo will help you get the desired result. For slime you will need:

  • a tablespoon of gelatin;
  • 100 ml hot water;
  • 2-3 tablespoons of shampoo;
  • dye can be added if desired.
  1. In a small bowl, first mix the gelatin with hot water until the powder is completely dissolved.
  2. Then add a few tablespoons of shampoo and dye. Everything is thoroughly mixed with a wooden stick until a homogeneous consistency is obtained.
  3. The thick mixture can be poured into a mold for a jelly figurine, or simply cooled in the refrigerator for one hour.

Due to the content of perfumery fragrances in the shampoo, the slime acquires an original aroma.

With toothpaste

For the production of slime, a paste of any manufacturer of cosmetics is used. To get a slime with a scent of fruit, you can use a baby product. In this case, the paste should not contain inclusions or dense grains. For this you will need:

  • Toothpaste;
  • food gelatin;
  • mixing container and paddle.
  1. The gelatin powder is preliminarily dissolved in water, heated over a fire and cooled. The cooking ingredient is used at the rate of 25 g of powder per tube of toothbrush.
  2. To solidify the slime, the resulting mixture is left in the refrigerator for several hours.

Some sources say that a little granulated sugar can be added to the resulting mixture.

Slime recipes: how to make a toy at home?

There are a large number of slime recipes. They all differ in the set of certain ingredients and their quantity. So, let's look at the most popular and most loved by people.

From PVA glue

To prepare this slime, you will need the following components:

  • Light plasticine (if this is not at hand, it can be easily replaced with an air analogue).
  • PVA glue.
  • Sodium tetraborate.
  • Baking soda.

Cooking method:

  1. Plasticine is crushed into small pieces and placed in a container.
  2. Pour it with PVA solution.
  3. Mix thoroughly until a mushy consistency is obtained.
  4. Add a few drops of sodium tetraborate and mix again.
  5. Without ceasing to interfere, add baking soda.
  6. After the slime easily peels off the edges of the container, take it out and knead it by hand for 5 minutes.

In such an easy and simple way, you can get slime at home, and you don't need to have any specific skills.

No glue

In this recipe, it is quite possible to do without glue and dye. But the following ingredients are required:

  • Light plasticine - 1 pack.
  • Gouache of any color.
  • Gel soap bubbles - 1 pc.
  • Foot spray - 12 doses.

Cooking option:

  1. Plasticine is mixed with gouache and kneaded by hands.
  2. Grind it into small pieces and put it on a plate.
  3. Add gel soap bubbles, mix.
  4. The resulting mass is sprayed with a foot spray.
  5. Mix by hand for 2-3 minutes, add sodium tetraborate.
  6. Leave the slime for 10 minutes, after which it is completely ready for use.

From sodium tetraborate

A distinctive feature of this slime is the subtle smell of coconut, because coconut oil is used in its manufacture.

Composition:

  • Light plasticine - 2 pcs.
  • PVA glue - 80 ml.
  • Coconut oil - 1 tsp
  • Water - 1 tsp
  • Sodium tetraborate - 1 tsp

Cooking technology:

  1. PVA and coconut oil are poured into a small container.
  2. Stir until smooth.
  3. Add a thickener.
  4. Stir thoroughly with a spoon until the slime becomes loose from the container.
  5. Drumming with your hands, this allows you to make the slime less sticky.
  6. The resulting mass is divided into several identical parts.
  7. Add 1 pack to each of these parts. light plasticine.
  8. Then they are connected and crumpled in the hands for 5-10 minutes.

Elastic slime with hot water

This recipe is for making an elastic and airy butter slime.

Components:

  • Light plasticine - 2 pack.
  • Hot water - 2 tbsp. l.
  • Any shampoo - 1.5 tsp.
  • Shaving foam - 4 tbsp. l.

Cooking method:

  1. Both packages of plasticine are mixed with each other and placed in a cup.
  2. In the middle of the mass, a small depression is made and boiling water is poured into it.
  3. Shampoo is added there and mixed.
  4. Squeeze out the shaving foam, mix thoroughly.
  5. Take the slime out of the container and knead it with your hands.

Important! It is recommended to pour in liquid components gradually and stir well. An interesting video recipe for making a butter slime, but using warm water:

An interesting video recipe for making a butter slime, but using warm water:

With the addition of shampoo

The following ingredients are required:

  • Air plasticine - 1 b.
  • Shampoo - 1 tsp.
  • Water - 0.5 tsp.

Slime making method:

  1. Plasticine is thoroughly kneaded with hands.
  2. A depression is made in the middle, water and shampoo are poured into it.
  3. Knead with your hands until the slime becomes a homogeneous consistency.

With gelatin

To make a gelatin slime, you will need the following components:

  • Gelatin - 25 g.
  • Hot water - 5 tsp.
  • Starch - 6 tsp
  • Light or airy plasticine - 1 pc.

Slime manufacturing technology:

  1. Gelatin is poured into a small container.
  2. Boiling water is added to it.
  3. Stir until the particles are completely dissolved.
  4. Pour starch and mix again.
  5. Take it out of the container and knead it with your hands.
  6. Add light plasticine and knead again.
flwn.imadeself.com/33/

We advise you to read:

14 rules for saving energy