What is cloud slime and how to make it at home

Storage and use rules

So, you got acquainted with the preparation of several types of slimes at home, and now you need to think about where to store it.

Attention. The best way to keep your toy looking good is to place it in a tightly sealed container and keep it cold, using the bottom shelf of the refrigerator.

There are no toxic ingredients in the toy, so children of all ages can play with it, but it is undesirable for babies under three years old to give a slime in their hands, because at this age they taste everything. Older children should wash their hands after playing with slime and keep the toy clean, which can be cleaned under running water or removed with tweezers that adhered to it.

If the slime has lost its elasticity and breaks, then it can be saved by following some recommendations. Put it in the microwave for ten seconds in the warming mode. You can add some baby or other cream. Lubricate the surface with one drop of glycerin and knead the slime with your hands.

If you do not have the opportunity to make slime at home, then you can buy it at the store.

PreviousAn extraordinary recipe for hand gum! How to make a slime from an egg and store it? NextA great slime from an air freshener. How to make such a toy and how to store it?

What is the best glue for slime?

Kleevykh
There are a huge number of compositions: from stationery transparent adhesives to PVA.
We offer to consider the advantages and disadvantages of the most popular ingredients
for making slime at home:

1. Silicate glue - this material represents
   a solution of potassium or sodium silicates, also called "liquid glass" in
   the strength of its properties. Combines well with boric acid, alcohol or
   cologne;
2. Glue Titanium is a polymer composition that
   differs from other analogs in increased moisture resistance. From this material
   the slime is more elastic. Combines well with shampoo, liquid
   soap or gel. Can be purchased at a hardware store;
3. Polyvinyl acetate (PVA) is the most popular adhesive for
   cooking slimes at home, due to the affordable cost
   goods and a wide range of applications. You can find it in any stationery store.
   With the help of PVA, you can make fluffy slime, transparent slime, and other options.

Please note
that to work with the first two variants of adhesives it is necessary
carry out preliminary actions. We'll look at them in recipes.

The best recipes for cloud slime without snow

To make a slime, follow the dosage and procedure exactly. But it is not always possible to indicate a certain amount of thickener: it varies depending on the quality of the remaining components and the nature of mixing the composition. Further popular working recipes for cloud slime without snow.

Slime with light plasticine

The recipe for how to make cloud slime without snow uses airy plasticine. It creates the basis for the future toy. Due to its light texture, plasticine provides volume and elasticity to the product. You will also need shaving foam or shampoo to make the slime stretch well. They thicken the mixture, thanks to them the slime is stretched into a film. Add kinetic sand if desired. Its particles are very small, they form a fine structure of the slime.

Ingredients:

• a bag of air plasticine;
• kinetic sand (the volume depends on the selected amount of plasticine);
• 1-2 tbsp. l. shaving foam.

Preparation method:

1. Knead the clay well in your hands so that it stretches and becomes soft.
2. Add a little kinetic sand. The finished mass is stretched, drizzling, but not thick.
3. Form a cake from the resulting composition and cover it with a layer of shaving foam.
4. Knead the slime with your hands until the foam is completely absorbed and the slime is elastic and airy.

When deciding how to make cloud slime without artificial snow, stock up on fresh ingredients. Stuck plasticine becomes hard, it is difficult to knead it. But if there is no other material at hand, add some hot water to the toy and mash: boiling water will help return the plasticine to its former softness.

Slime with hydrogel

Baby diaper filler is a great recipe for making cloud slime without snow. This substance, mixed with cotton wool and synthetic fibers inside the diaper, resembles artificial snow and perfectly replaces it. To get the hydrogel, open the diaper and remove the contents. You will also need PVA or silicate glue, tetraborate and shaving foam.

Ingredients:

• a bottle of PVA glue;
• hydrogel from one small diaper;
• 1 tbsp. l. shaving foam and liquid soap;
• sodium tetraborate.

Preparation method:

1. Squeeze the glue into a container.
2. Remove the hydrogel from the diaper and place it in a separate bowl.
3. Add shaving foam and liquid soap to the glue.
4. Stir, color if desired and add flavor.
5. Thicken the glue mass with tetraborate, adding it drop by drop and mixing the composition.
6. Inject the hydrogel a little at a time, but don't overdo it. If the slime doesn't stretch and tears, add more glue.

The consistency of the toy does not differ from that prepared with artificial snow. The recipe is simple and suitable for children.

Slime with starch

The recipe is even simpler than the previous one. For the manufacture of slime, in addition to glue, you will need starch. It creates a thick texture, and its particles form a kind of cloud. Acrylic paint is suitable for staining.

Ingredients:

• 60-70 ml of glue;
• 70 g starch;
• 150 ml of cold water.

Preparation method:

1. Dissolve the starch with water and stir until the consistency of the mixture becomes homogeneous.
2. Pour the composition into a zip bag.
3. Add glue, dye if desired.
4. Close the bag tightly and knead it with your hands until the slime thickens.
5. When excess liquid comes out of the composition, drain it.
6. Take out the slime and knead it with your hands until it thickens.

Put the resulting slime in the refrigerator.

How to cook without snow

Slime can be made without using artificial snow and even without sodium tetraborate. For the first time, slime can be prepared from what is at home. The shelf life of such a toy is short, but the cost is also low.

Take:

• cold water - 150 ml;
• starch - 75 g;
• PVA glue - 60 ml;
• acrylic paint (3-4 drops);
• freezer zip bag.

Pour starch into a container of small volume, add water to it, knead the mass until a homogeneous consistency, pour into a bag. Pour dye and glue into it. Fasten the bag fastener, mix its contents until thickened. If excess liquid forms, drain it. Take out the slime.

An excellent cloud slime can be made without snow, if you have diapers at home, take:

• PVA glue;
• dye (acrite paint);
• sodium tetraborate (activator);
• filler for one diaper (hydrogel).

Pour some glue into a glass (plastic) cup. Add a couple of drops of acrylic paint to it. Stir with a spoon until a uniform color is obtained. Add a thickener (sodium tetraborate). Knead the mass. It should become elastic, not stick to your hands. Take out the contents of the diaper, choose a hydrogel from it. Stretch the mucus, add a small portion of the gel, knead it into the mass. Repeat the operation several times until the desired structure of the slime is obtained.

Useful tips for making slimes

Lack of elasticity leads to tearing

To provide emergency assistance to the slime, experts have written a number of tips.

• Will stick to your hands. To solve the problem, it is left to dry for several hours in the open air or a couple of drops of the activator are added.
• Tears apart.The addition of citric acid, glycerin or baby cream will help restore elasticity to the mass.
• Decreases in size. Increasing the volume allows feeding with warm water (no more than 5 milliliters), salt porridge (5 drops of water and a pinch of salt), an aqueous solution of glue with salt and shampoo.
• Too hard. 1-2 drops of warm water are added to the slime and knead well.
• Too watery. To solve the problem, knead the mass well, and then add 1-2 drops of the activator.

Features of storing and using slimes

Slime storage containers

Slime is a fascinating toy that retains its properties for a long time only when properly used and stored.

• Storage capacity. Slime is stored in a plastic container, a pencil case from writing instruments, a jar with a tight-fitting lid, and a zip bag.
• Temperature conditions. The container is kept in the refrigerator or on the balcony. The optimum temperature is no more than 18 degrees.
• Humidity. The toy is not stored in rooms with high humidity - a bathroom.
• Heating devices and lighting. It is not allowed to store slimes near heating devices, on a windowsill or in direct sunlight.
• Cleaning. Large particles of debris are removed with tweezers. Also, the toy is passed through a syringe without a needle. This removes small dirt.

Important! If mold appears in the slime, this means that the item on the storage rules has been violated. The toy should be thrown away

The main type of cloud slime game is stretching and kneading in hands. Slime is not recommended for gluing on fabric surfaces, upholstered furniture, carpets.

Exact adherence to the proportions and instructions on how to make a cloud slime with your own hands will allow you to achieve an excellent result. With proper storage, the toy will delight children for a long time.

Cloud slime recipes

We offer popular recipes for making cloud slime at home. Slime ingredients are easy to find on your dresser, kitchen, or bathroom.

Shaving foam slime

Before making a cloud slime, take care of preparing a fresh shaving foam. A stale product will not allow you to make a high-quality slime. This rule applies to other components as well. Thanks to the foaming elements, the toy comes out elastic and airy.

Components:

• 100 ml PVA;
• 20 ml shaving foam;
• 5 ml of foam for washing, cosmetic oil and hair mousse;
• 3 drops of sodium tetraborate;
• artificial snow.

Preparation method:

1. Pour glue into a container for preparing a toy, according to the recipe for how to make cloud slime.
2. Add the rest of the ingredients besides the artificial snow and tetraborate.
3. Start adding borax drop by drop, kneading the composition.
4. Dilute the artificial snow with water as directed in the instructions for the filler.
5. When the substance is swollen, add it to the main mixture in small portions, observing the consistency of the slime.
6. At the end, add a coloring agent if you want to give the slime a certain shade.

The finished product is pleasant to the touch and stretches well.

Slime with starch

There is no artificial snow in the recipe for how to make a cloud slime. The product is prepared without sodium tetraborate; starch is used instead of the activator. Although the shelf life of the toy is short, it can be prepared quickly.

Components:

• incomplete glass of cool water;
• 75 g starch;
• 60 g PVA;
• 4 drops of acrylic paint.

Preparation method:

1. Dissolve the starch with water and stir.
2. Pour the composition into a zip bag or airtight container.
3. Add glue, tint the mixture with acrylic dye if desired.
4. Zip up the bag or close the container.
5. Whisk the composition. When it thickens, drain off any liquid that has evolved.
6. Take out the slime and knead it with your hands.

Store the finished product in the refrigerator.

Slime with diaper filler

The composition of modern diapers contains a hydrogel. It can be an excellent raw material for a recipe for how to make cloud slime.Along with it, you will need glue and sodium tetraborate.

Components:

• a bottle of PVA glue;
• 3-4 drops of sodium tetraborate;
• 1 diaper;
• 2-3 drops of acrylic paint.

Preparation method:

1. Squeeze the glue from the bottle into the container.
2. Colorize the composition.
3. Add sodium tetraborate dropwise.
4. Knead the product so that it does not stick to your hands.
5. Cut the diaper and take out the hydrogel.
6. Add to mixture and knead again.
7. If necessary, add more hydrogel to get the slime the desired texture.

The toy turns out to be viscous and soft. It shouldn't stick to your hands.

Body Cream Slime

For the recipe, you will need to prepare a regular slime from glue and sodium tetraborate. It will serve as the basis for making cloud slime. You will also need fake snow and body cream or lotion.

Components:

• original slime;
• artificial snow;
• body lotion.

Preparation method:

1. Dilute artificial snow with water according to the instructions.
2. Dip the finished slime into the snow and knead.
3. Thicken the composition with lotion, but do not overdo it with this element, so as not to leave a greasy residue.
4. Add snow and lotion until you get the right consistency of the toy.

Knowing what cloud slime is made of, you can experiment with the components.

Slime with light plasticine

To make a toy, you will need not only plasticine, but also kinetic sand. The latter plays the role of an ingredient with fine fractional particles that create the required consistency. Shaving foam adds airiness to the product.

Components (dosage is determined by the size of the slime):

• kinetic sand;
• shaving foam;
• air plasticine;
• flavors and dyes as desired.

Preparation method:

1. Take some airy clay, knead it and start adding kinetic sand. Add the ingredient a little at a time to avoid creating an overabundance. If the composition is stretched into a thin strip, it is ready for further manipulations.
2. Cover the mixture with a thin layer of shaving foam.
3. Knead the toy with your hands until it is soft and elastic.

Important! Choose similar shades of sand and plasticine so that the slime comes out uniform.

Without water

The absence of water in the base for the slime allows you to make its texture perfect and save time for making the toy. And artificial snow swells from the moisture contained in the glue. There is also water in the activator, which is prepared from 200 ml of liquid and 2 tsp. sodium tetraborate. But even in it, you can not use it, but get by with the drug in its pure form. Then it will take only 3-4 drops.

How to cook cloud at home

1. The first component is PVA glue, but it needs to be moved from the bottle to the cup.
2. The activator is added immediately.
3. Stir the liquid with a spatula until curdled.
4. The mass must be crumpled with your hands for a couple of minutes so that it stops sticking.
5. The next step is to add dry artificial snow to it.
6. Now the slime needs to be kneaded again with your fingers.
7. The mass will become sticky, so more thickener should be poured into it.
8. The slime will be ready after hand kneading.

Storage rules: do you need special care for the toy?

Reference. In order for a toy made with your hands to serve as long as possible, you need to properly care for it and observe storage conditions.

Everyone knows that the slime is sticky, because of this it gets dirty very quickly, becoming covered with dust and lint. Therefore, it is recommended to periodically clean it from dirt by washing:

• you can wash the slime only in cold water (no higher than 20 degrees), after this procedure it is placed in a closed container and moved to the refrigerator for half an hour;
• to clean a small slime, you can use a regular medical syringe, the slime is removed inside, and large debris remains outside.

In order for the hand gum to serve longer, it is necessary to observe the conditions for its storage:

• keep the slime in resealable containers when you are not playing with it;
• Store the toy in the refrigerator during summer to prevent it from running out and running.

In a room with high humidity, the slime very quickly becomes completely unusable.

The video below provides tips that you can use to extend the life of your slime:

Making a slime from glue is easy. The main thing is to prepare quality components in advance and follow the instructions completely.

PreviousWhat to replace sodium tetraborate in slime? Recipes how to make a borax-free slime and useful life hacksNextHow to make an amazing elastic butter slime? The nuances of storing and caring for a toy

Tips & Tricks

It is pleasant to crush, stretch the slime if the mass does not stick to your hands. In summer, due to the heat, the toy begins to stick, you need to drip 2 drops of the activator to restore its firmness and elasticity. Usually sodium tetraborate is used. They sell it in a pharmacy, it is an antiseptic, its base is boric acid.

Another problem is that the slime breaks because the mass has lost its elasticity and has become hard. In this case, it will help:

• microwave, in it the toy can be heated for 10 seconds;
• some baby cream;
• glycerin - 1 drop.

Good quality mucus is supported by table salt:

• add it to the mass (a little);
• put the toy in a container;
• pour 1 tsp into it. water;
• close the lid;
• shake several times;
• knead the mass.

If the mucus has lost its elasticity, you can add 2-3 drops of vinegar to it. To increase the volume of the mass, add hydrogen peroxide. Tips will help beginner slimers create their first toys.

p> Share link:

With cream and toothpaste

With this method of making a toy, it is important not to put in too much toothpaste. After all, a lot of liquid components are already used here.

And the paste can interfere with the stabilization of the composition if it is in excess. The same goes for the cream. When there is too much of it, the mass will disintegrate into separate pieces, and then more glue will have to be added.

Components

• 100 ml PVA glue,
• 0.5 tsp hand creams,
• 2 peas of toothpaste
• 0.5 tsp shampoo,
• 1 tsp artificial snow,
• 2-3 tsp water,
• 1 tsp sodium tetraborate diluted with water (200 ml per 2 tsp).

Making a cloud slime at home

1. In a small cup, mix artificial snow and water.
2. It still needs to be removed to the side so that the grains swell from moisture.
3. PVA glue is poured into other dishes.
4. The cream is added to it first.
5. Next, put in toothpaste.
6. To make the toy click louder, add shampoo.
7. It's time to make the composition homogeneous.
8. It remains to pour in the activator.
9. Now the mass should be kneaded with a spoon and hands.
10. The finished classic slime needs to be mixed with swollen artificial snow.

We recommend reading about how to make a glossy slime. From the article you will learn how to make 8 glossy slimes from PVA glue, stationery glue, water, sodium tetraborate and shaving foam.

And here is more about simple recipes for making fluffy slime.

Cloud Slime is another fun toy that is fun and easy to make. Actually, you can use any original or fluffy recipe by adding artificial snow to it. The key here is to find good glue.

Be sure to watch the video on how to make a fire cloud slime from the available ingredients:

Out of the water

When artificial snow is added to the base, it becomes weaker, more fluid. Therefore, when they are mixed, additional activator can be used to preserve the texture of the cloud slime. And to speed up the process, you should divide the slime into pieces, work with each separately. And in the end, it remains to combine several small snow slimes into one large one.

Proven recipe

• 50 ml of clear glue,
• 1-2 tbsp. l. PVA glue,
• 1 tsp body lotion,
• 6 tbsp. l. + 3 tbsp. l. water,
• 2 tbsp. l. starch
• 2-3 drops of dye
• 2 tsp sodium tetraborate diluted with water,
• 1 tbsp. l. artificial snow.

Making snow slime at home

1. In one cup you need to combine stationery glue and PVA.
2. They are supplemented with body lotion.
3. Next, you need to add most of the water to the previous components.
4. Everything is mixed well with a mixer to get a lush and thick mass.
5. Starch is added to it and whipped again.
6. The liquid can be painted.
7. Time to use the activator.
8. The mass is kneaded with a spatula until stabilized, then by hand until tender.
9. In a separate bowl, artificial snow and the remaining water are combined.
10. When it increases, the grains are added to the slime and kneaded.

Description and features of cloud slime

The first slime (slime) was made by a girl. She played in her father's factory, mixed different ingredients, added food thickener to them and got a jelly-like mass. Since 1976, Mattel has begun producing jelly balls. The first items were green. To prevent them from drying out, they were packed in jars with lids.

They just played with slimes. They were thrown at the wall. The ball first spread over it, then restored its shape. Toys were made from non-Newtonian fluids.

Nowadays, it is not slimes that are popular, but cloud slimes (cloud slime, cloud slime). They differ from other types of mucus in that they contain artificial snow. Pros of an airy crispy toy:

• does not get your hands dirty;
• does not leave marks on the surface;
• relieves nervous tension;
• distracts from unpleasant thoughts;
• develops fine motor skills in babies;
• can be carried with you.

Minus - collects dirt.

What is a Restock in Sliding?

The fashion for slimes began not so long ago, but many already know how to make them. However, not everyone knows what a slimer restaurant is. The term comes from the English "restock" and means "restock".

A variety of slimes are presented on the restoker page. Slimes for mass sale differ in color, texture and decor. As a rule, these are colored, fragrant, shiny, iridescent, iridescent crafts. Often there are products with beads, styrofoam, small toys or candy inside. Such restocking slimes look beautiful, original and unusual, they are pleasant to the touch. You will not find such handgams in a regular store.

Slimers selling slimes on social networks (for example, Instagram is popular), when they post photos of products, designate the product with the hashtag #restok. Thus, with its help, buyers, lovers of original toys, will quickly find designer slimes.

What is a restock in slimes is also of interest to slimers-collectors who want to replenish their collection with new copies, since restockers' accounts contain not only vivid photos of handicrafts, but a description of the type of texture, additives and flavors, special properties of the handgam and the process of making toys, the price of products. In addition, the release of the collection is often accompanied by a video where you can view all the manipulations performed in the slime shop.

Thus, restocking on slimes can be compared to creating a collection for a fashion designer.

The launch of the sale of slimes on social networks can be encountered more and more often, but at the same time it is important to know how to properly prepare for the first collection

Planning a Slime Restack

Before opening your own slime store, you need to register on a social network, be it Instagram or Facebook, and learn how to make original slimes yourself. Popular recipes for restocking slimes, which will become the beginning of a new business, will help facilitate the task.

To create a variety of slimes with different decor, you need to make a large base slime, which will then be divided into portions and decorated in an original way.

It is important to develop an action plan in advance so that the restok does not come out lumpy.

What needs to be foreseen at the preparation stage before making a restocking for slimes:

1. Buy everything you need to make a slime: a binder (most often it is glue), a thickener (sodium tetraborate or other activators containing boric acid salts).
2. Prepare additives to improve the texture of the product. These are different types of plasticine, clay and modeling dough, which will help to make butter slime, artificial snow or diaper gel to create snow slime.
3. Stock up on original decor to decorate the first collection for sale: foam balls, beads, beads, glitter. Foam chunks, charms and Jelly Cube are considered fashionable additions.
4. Do not forget to prepare packaging - containers for slimes, in which you will sell them.

Note! When making slimes for restocking, you should not use toxic types of glue, such as "Moment" or "Titan". Such substances are not commercially appropriate

Leave them to experiment at your leisure. For custom-made slimes, it is better to take working PVA or stationery glue.

When developing a slime restock, it is important to come up with a concept for your party. For example, the collection is often dedicated to some holiday - New Year, Valentine's Day.

Ideas can be found in your favorite cartoon. You can make a collection of slimes on an edible theme, these are always popular with subscribers and buyers. You can also get inspiration from more famous bloggers by watching their videos.

When making slimes for restocking, it is important to design the collection beautifully, to come up with its name, the name of the slimes, corresponding to the appearance of the products, and memorable. This is an important part of the concept

How to choose ingredients

The basis is PVA glue. It must be fresh. If the expiration date is running out, then a high-quality toy will not work. To make one slime, you will need about 100 g of glue

The thickener is the second most important mucus substance. It is in any pharmacy

They release him freely, without a prescription. The activator has many names:

• borax;
• borah;
• sodium tetraborate.

The formula of the substance (sodium salt of boric acid) is Na₂B₄O₇. To make a transparent slime, you need a third component - water. Without it, the mucus will be dull and less elastic. An optional ingredient is dye. To stain mucus, take acrylic paint, gouache, food coloring.

• clay;
• Styrofoam;
• artificial snow (Instant Snow).