Slime from drops of naphthyzine without glue

Rules for the storage and use of slimes

Considering that this type of slime does not contain food additives that quickly deteriorate, it is not necessary to store the finished toy in the refrigerator. However, the mass will dry out quickly if left outdoors. It is recommended to set aside a plastic container for storing plastic material. When it begins to lose its properties, a minimum amount of brine is added to the bottom of the container. Then you need to shake the contents several times. As a result, the slime will absorb some of the liquid, and the presence of salt will make the material elastic again.

If you choose a way to make a slime with Naphtizin, it must be borne in mind that the first time it is not always possible to prepare a mass with the desired properties. After adding too much baking soda or nasal medication, it will be difficult to restore the toy's properties. In addition, prolonged contact with the skin of the slime increases the risk of irritation.

Video

Slime recipes with paper products

It's hard to believe that kids' favorite sticky slime can be made from toilet paper. However, many slimers have already put this idea into practice. But newspapers and cardboard are better to put aside: they do not dissolve well in water.

With the addition of dishwashing gel

To create a slime, it is advisable to use only the highest quality paper - soft and consisting of several layers. Paper products such as disposable towels or napkins will also work.

1. Grind several large pieces of toilet paper and fill them with two tablespoons of any dishwashing detergent.
2. Stir until smooth.
3. Add two pinches of baking soda and stir again thoroughly.
4. The liquid should become thick. Only after that a few drops of "Naphtizin" are added to it.
5. The last component is two to three tablespoons of the film mask. The cosmetic product is responsible for the consistency of the slime: the toy will keep its shape better. We mix everything until the composition stops sticking to the dishes.
6. To finally get rid of stickiness, knead the future toy with your hand.

With soap

The soap must be liquid, it must have a thick concentration.

1. Combine shredded paper with three tablespoons of soap. Stir until foamy homogeneous mass is formed.
2. If desired, it can be tinted with any food coloring.
3. We add a mask-film or PVA glue (50 g) and observe the result: if the mass is too liquid, we will cut more paper.
4. The next ingredient is a pinch of baking soda. We begin to actively shake up the composition.
5. The final touch is a few drops of Levomycetin. They act as a thickener.
6. Now the slime needs to be mixed. It will take a lot of time. This should be done until it stops sticking to dishes and hands.

With flour

Slime with flour stretches well, but has a short service life - only two to three days.

1. Pour shampoo into the crushed toilet paper and mix everything thoroughly.
2. We drip a little "Naphtizin" into the composition and leave for 20 minutes: soon the mass will become homogeneous and viscous.
3. We add a spoonful of flour and begin to knead our toy well: first with a spoon, and then with our hands.
4. The finished slime should lie in the refrigerator for 30 minutes.

From shampoo

A slime made of toilet paper or napkins and shampoo will appeal to those who like to conduct unusual experiments.

1. Pour four tablespoons of shampoo into a bowl. We also send shredded toilet paper there.
2. Knead the mass thoroughly. This should be done for at least five minutes.
3. We are waiting for another 10 minutes: during this time, the paper will completely dissolve in the liquid.
4. Put 30 g of starch and mix again.The composition should finally curl up.
5. At the final stage of making, the slime is kneaded by hand.

Reference! Shampoo can be replaced with shower gel if desired.

With shaving foam

This interesting slime is stored only in the refrigerator - in the heat it will instantly deteriorate.

1. Tear a layer of toilet paper into small pieces and fill it with a glass of water.
2. Stir quickly and add half the tube of the film mask. The cosmetic product must have a transparent color.
3. If you wish, you can "revive" the future toy by putting a third of a teaspoon of dry dye into the mass.
4. The last component is a few long puffs of shaving foam.
5. Mix everything well and put in a thickener: washing gel like "Persila" or liquid for contact lenses. Now the slime will stretch well.
6. Knead the slime with your hands; remove excess moisture with a napkin.

With glue

You can take different glue for slime: stationery, PVA or silicate. The selected product must necessarily interact with sodium tetraborate.

1. We immediately mix five tablespoons of the selected glue with the dye: this will make the color of the toy more uniform.
2. We add shredded toilet paper or disposable napkins.
3. We introduce five drops of sodium tetraborate. It can be purchased at the pharmacy. The tool acts as an activator.
4. We mix the mass with a wooden spatula: it should not curl up and stick to the dishes.
5. We continue kneading with our hands.

With water

The main thing in this recipe is the use of warm water. And shower gel can be replaced with liquid soap.

1. Mix about three tablespoons of water with the same amount of the chosen hygiene product.
2. We also send small pieces of toilet paper there.
3. We mix everything thoroughly for five minutes.
4. We are waiting for the complete dissolution of the paper and dip a handful of dry starch into the mass. It is best to take corn.
5. The composition should curl up. If it doesn't, add more starch.
6. Knead the finished slime with your hands.

Reference! To give the slime a pleasant color, you can use not only food colors, but also vegetable juices, as well as brilliant green.

Storage rules

It is better to place a homemade slime in an airtight plastic jar or a zip-bag. So that it does not liquefy from the temperature, which often happens in summer from the heat, it is recommended to keep the jar on the refrigerator door.

In order for the Velcro toy to last as long as possible, you need to play by the rules, avoiding throws on the floor or on the ground. If you accidentally dropped a slime, then you need to rinse it in a bowl with cool water. It is not recommended to wash in the sink, as the toy may leak into the drain and cause clogging. And do not forget to store the slime in a closed jar, otherwise it will dry out and deteriorate.

Related videos:

Why is it possible

Lizuns became popular after the release of the film "Ghostbusters" and are named after the hero. The jelly-like mass fell in love with millions of children, and soon the mass production of slimes began, predominantly green, like the slime ghost. Today they are made multi-colored, magnetic, luminous or completely unique by adding their own ingredients.

Naphthyzine-based slimes are relatively harmless to children (if you don't play with them all day and don't try them by mouth). There are several interesting and effective recipes for slimes from these drops for a cold: with and without glue. But each contains naphthyzine and soda. The combination of these two ingredients gives the initially liquid mass a jelly-like shape and makes it stretchy. There are no clear instructions for making, everything is done by eye, the ingredients are added slowly, gradually.

Naphthyzin Slime Recipes

Although nasal drops by themselves are not harmful or toxic substances, strong-smelling substances are present in the slime: glue, detergents, shaving foam. Ventilate the area well or open a window before starting work. Prepare plastic kneading utensils.Do not use metal: slime components react with metal and lose their properties. Wear gloves and a mask so that toxic substances and allergens do not get on the skin and mucous membranes.

Slime without glue

When thinking about how to make a slime with Naphthyzin without glue, keep in mind that the slime will be less elastic than the store one. Handgums are not difficult to make, but they require a dietary supplement called guar gum.

Ingredients:

• half a glass of guar gum;
• 0.5 l of water;
• 0.5 tbsp. soda;
• Naphthyzin;
• dye.

Preparation method:

1. Pour the water into a prepared plastic container.
2. Touch up the liquid with dye.
3. Sift the gum through a sieve and add to the water. Pour it in 1 teaspoon, stirring thoroughly.
4. Add 15 drops of Naphthyzine and stir. The composition should acquire the consistency of a thick jelly.
5. Sprinkle baking soda on top of the mixture until the slime thickens.
6. Stir the mixture with a spatula until it begins to lag behind the walls of the dish.
7. Take the slime in your hands and knead for 10 minutes. Now you can start playing.

Slime with glue

This slime is very easy to make. Slime will be more interesting if you divide it into parts and tint in different colors. Then combine the compositions and get a rainbow slime.

Ingredients:

• a bottle of PVA or other glue for 150 ml;
• glass of water;
• half a glass of baking soda;
• Naphthyzin;
• dye.

Preparation method:

1. Squeeze the glue from the tube into a plastic container.
2. Touch up the adhesive base to the desired shade.
3. Add 5-10 drops of Naphthyzin.
4. Add soda gradually and stir the composition so that it begins to lag behind the walls of the container.
5. Take the mixture in your hands and continue kneading.
6. When the slime stops sticking, it is ready to play.

Slime with salt

The recipe is similar to the previous one, but instead of soda, salt is used as an additional activator. It gives viscosity and elasticity to the composition, thanks to the food additive, the slime does not stick to the hands.

Ingredients:

• 50 ml bottle of silicate glue;
• 5-6 tablespoons of water;
• a pinch of soda;
• half a teaspoon of Naphthyzin.

Preparation method:

1. Mix glue and water in one bowl.
2. Add salt and mix thoroughly to dissolve it.
3. Top up with Naphthyzine and continue stirring with a spatula.
4. When the slime thickens, take it in your hands and knead it until it stops sticking.

Slime with shampoo and toothpaste

This recipe is more complicated, but the result will please. The richness of the components makes the slime viscous, tough, stringy. These properties are given to slime by detergents.

Ingredients:

• 100 ml PVA bottle;
• a teaspoon of shampoo;
• a pea of ​​toothpaste;
• 0.5 teaspoon of thick cosmetic cream;
• a pinch of soda;
• a teaspoon of Naphthyzin.

Preparation method:

1. Pour the glue into the prepared dish.
2. Add shampoo and stir until smooth.
3. Squeeze out the toothpaste and cream into the same container.
4. Mix everything and add soda.
5. Naphtizin is poured last.
6. Stir the composition until it thickens and begins to lag behind the walls of the container.
7. Take the slime in your hands and knead it thoroughly.

Slime with shower gel

The detergents in this recipe give the slime elasticity and ductility. In combination with activators, an excellent and inexpensive handgam comes out.

Ingredients:

• 2-3 tablespoons of shower gel and shampoo;
• 5-6 tablespoons of silicate glue;
• a pinch of soda;
• Naphthyzin.

Preparation method:

1. Mix shampoo and gel in one slime container.
2. Add glue and mix until smooth.
3. You can add dye if you wish.
4. Add thickening baking soda and stir again.
5. Inject Naphtizin drop by drop, achieving a viscous slime consistency.

Stop when you get a sticky handgum. Take it in your hands and knead it.

Slime with light plasticine

The recipe is based on the use of a film mask, shampoo and airy plasticine. These components help to achieve a viscous texture, making the slime more durable.Naphthyzine is used instead of sodium tetraborate for thickening.

Ingredients:

• a small tube of a film mask;
• 1 tablespoon of shampoo;
• a bag of air plasticine;
• Naphthyzin;
• a pinch of soda.

Preparation method:

1. Squeeze the film mask into a container.
2. Inject shampoo and stir until smooth.
3. Mash the airy plasticine with your hands and add to the mixture.
4. Add Naphthyzin drop by drop, stirring the composition and monitoring its consistency.
5. When the slime begins to lag behind the walls, sprinkle with baking soda and knead.

The finished product is viscous and soft, hardly tearing.

How to make fluffy slime without glue and sodium tetraborate

Slime is pleasant to the touch, soft, fluffy. It's easy to make at home. Such a hand-made craft does not require a lot of time or the use of complex ingredients.

Sodium tetraborate belongs to the thickeners, thanks to which the antistress holds its shape, and the glue provides elasticity. But you can make an air slime without glue and tetraborate. The recipe will need ingredients:

• shower gel;
• Gala or Fairy dishwashing detergent;
• water;
• a pinch of baking soda;
• dentifrice;
• lens fluid;
• glitter gel pencil;
• jar with a lid.

How to do:

Pour into a plastic jar 1 teaspoon of shower gel or shampoo, 1 teaspoon of Gala or Fairy dishwashing liquid, 1 teaspoon of tap water, any temperature, close the lid and beat thoroughly until a thick foam forms ... Add a pinch of baking soda, stir and add 2 teaspoons of tooth powder. Bring the slime to a smooth consistency, squeeze out 5 tubes of neon glitter gels and thicken the slime with lens fluid.

The resulting fluffy is without glue and sodium tetraborate, after cooking it is better to leave it to cool for several hours.

Naphthyzine Slime Recipe

Self-creation of diy slime using drops from the common cold usually does not cause difficulties. The main thing is to follow the recommendations in the instructions, strictly observing the recipe. When you learn how to make slimes on your own, experiment with different ingredients, replacing them with interesting additives (dyes, glitters). And first, it is better to completely follow the recommendations from the recipe, observing the required conditions.

How to make a slime with naphthyzine and PVA glue

Consider a classic recipe for making slime from naphthyzine and PVA glue. The sequence of actions is as follows:

1. Pour a tube of PVA glue (150 g) into a container made of glass or plastic.
2. Add dye, mix thoroughly until uniform color and homogeneity.
3. Add a little water.
4. Add a few drops of naphthyzine, stir again.
5. Gradually begin to add the baking soda, while kneading the mass to avoid the formation of lumps. The baking soda will take about ½ cup. When the slime begins to peel off from the walls of the dishes, you need to take out and crush the mass with your hands.

If the slime does not stretch enough, it resembles rubber, the reason is the excess amount of added naphthyzine. If the slime breaks when stretched, add too much baking soda.

Is it possible to do without glue

If you do not want to add glue to the toy, you can do without the component. Slime will turn out to be no less elastic, and preparation is simple.

How to make slime from naphthyzine without adding glue:

1. Pour half a glass of water into a bowl, dilute the dye.
2. Through a strainer, gently spoon the guar gum into the container, stirring the mass continuously, excluding clumping. It takes about half a glass of gum.
3. Now it's the turn of the drops from the common cold. Add about 10-15 drops of naphthyzine to a bowl.
4. The result is a jelly-like mass.
5. Add soda through a sieve, stirring continuously, until the substance takes the form of a slime and begins to lag behind the walls of the bowl.

The resulting mass for 10 minutes needs to be kneaded with your hands so that the components fully dissolve and mix. After that, the desired consistency is achieved.Homemade slime can come out more sticky, but it is made with your own hands from safe ingredients.

What is in store slime: is it dangerous?

The slime that was produced at the dawn of the history of the appearance of this toy had guar gum in its composition. Now slimes are made from other materials. In general, experts note the harmlessness of the toy, but still, in certain cases, slimes can be toxic. Some ingredients can cause nausea, burns, diarrhea, etc. Parents are seriously worried that their children play with slimes, because, whatever one may say, this is real "chemistry"

Of course, if you play them carefully, do not taste them, and in general do not get carried away, then the slime is completely safe. But after all, the child is unpredictable, and it is not known what experiments he wants to put on a toy during the game.

Shop Slime

Not so long ago, scientists tested about 11 types of slimes for health hazards. And in 8 species of them there were increased concentrations of borax. Dangerous toys include CCINEE Pink slimes, Jupiter Toysmith, Cosoro Dodolu Crystal.

Some slimes can be hazardous to health.

At the heart of any slime there are activators and adhesive components. Gels, food colors of all kinds, and starch are also added. In addition, for beauty, glitter, beads and other decorative elements are put in the slime mixture.

Table. What is often included in the slime?

Sodium tetraborate - one of the ingredients for making slimes

Why is this possible?

Naphthyzine is a drug in the form of drops, used to facilitate nasal breathing. It is also used to make plastics. The ability of a drug to increase the viscosity of some substances is due to the fact that it contains boric acid. This is an auxiliary component. It does not provide the main therapeutic effect when used intranasally. However, boric acid is an important ingredient in slime making.

The cost of the drug is low. It is considered conditionally safe, so a slime based on this remedy can be given to children to play, but provided that the plastic mass does not get into the mouth. Naphthyzin drops are used along with baking soda. When these components are combined, the slime becomes more plastic. Additionally, glue is introduced into the composition, due to which the properties of the mass are improved. However, this ingredient is not essential. In addition, it is permissible to make slime without glue. In this case, a plastic mass is also obtained, but other components are introduced into the composition to improve the properties.

Without tetraborate with Naphthyzin

To make a toy without sodium tetraborate at home, you will need the following ingredients:

• water;
• baking soda;
• starch;
• dye;
• PVA glue;
• moisturizing cream;
• shower foam;
• nasal drops Naphtizin.

A step-by-step recipe for airy fluffy slime:

Pour 50 ml of glue, 1 tablespoon of water and 1 teaspoon of cream into a deep bowl. Stir until the liquid becomes homogeneous.
Add 2 teaspoons of starch, stir thoroughly.
Gently stir in 5 - 6 tbsp. shower mousse spoons

You need to be careful not to rush: the mixture should look dense.
Now stir in a little dye, and then a pinch of baking soda. Mix everything until smooth.
Pour in Naphthyzin little by little, about 0.5 - 1 hour

spoons, stirring the mixture.
After that, the mixture should curl up. Mash it in your hands until the fluffy slime is thick.

Diy recipes for making slime from Naphtizin

If the possibility of using glue is not foreseen, it is necessary to choose a substance that will act as a substitute. This component must have the ability to increase the viscosity of other substances. This group includes a synthetic-based food additive - guar gum or E412. Considering that the substance is used for cooking, it can be found in the food additives section of supermarkets.

Method for making slime without glue:

1. Prepare 0.5 cups of guar gum, the same amount of baking soda, 0.5 liters of water. Naphthyzine is used in an arbitrary amount. It is added as the mass thickens to obtain a more plastic substance. Additionally, a dye is added to the composition. You can use a liquid substance or a pigment in powder form. In both cases, the result is the same. However, the solution has the advantage that it manifests itself in the manufacture of plastic mass: the colorant in this form does not contribute to the formation of lumps.
2. For work, you will need a plastic or glass container, a wooden spatula, a sieve, thanks to which lumps will be removed from the mixture.
3. Water is poured into a container, mixed with a dye. The pigment is added in an arbitrary amount, taking into account the degree of brightness of the substance.
4. Guar gum is added to the solution. Considering that a large amount of this component must be used according to the recipe, it must be introduced gradually, mixing the composition, otherwise lumps will form.
5. Add Naphthyzine. The initial dose is a few drops. The substance must be mixed all the time. When the mass becomes sufficiently viscous, this component is ceased to be added.
6. Soda is introduced. At the same time, the slime also needs to be constantly stirred, then the likelihood of lump formation is reduced.

All bulk components (guar gum, soda) are recommended to be added to the composition by sieving. This will further reduce the risk of lumps. At the last stage, the slime must be kneaded until it ceases to stick to surfaces.

There is a recipe based on PVA glue and soda:

1. An adhesive is prepared, it is recommended to use the contents of 1 bottle or 150 g. The amount of soda is 0.5 cups. You will need the same amount of water, Naphthyzin and pigment.
2. The plastic container is filled with glue.
3. In order to further obtain a mass of uniform color, the dye is introduced before the thickener is introduced into the composition.
4. Add Naphthyzine. This component is introduced in an arbitrary amount.
5. Add soda. The powder should also be introduced into the mass gradually, while it is necessary to mix it.
6. Slime is kneaded with hands.

During the preparation of slime, various problems arise: if the material resembles rubber, does not stretch well, it means that a lot of Naphthyzine has been added; when a rapidly tearing mass is obtained, this may mean that too much soda has been introduced into the composition.

No glue from the film mask

Air slime can be made from improvised means, without special ingredients that are sold only at the pharmacy. What components are required:

• mask film, which includes polyvinyl alcohol;
• shower mousse or gel;
• baking soda;
• toothpaste;
• air freshener;
• liquid soap.

Step-by-step recipe for fluffy:

1. You need to take a bottle of 0.5 liters in volume. Pour a little gel and a little water into it. Shake the bottle well to form a strong mixture. Pour into a deep bowl.
2. Squeeze out toothpaste with liquid soap in equal proportions into another bottle. Also shake and add to a cup to shampoo.
3. Now put the mask-film to the composition and make a homogeneous mass.
4. Pour in half a teaspoon of baking soda, mix.
5. The air freshener is added gradually to prevent the mixture from becoming too hard. According to the recipe, if there is no freshener, it can be replaced with a similar thickener.
6. When the mixture stretches and stops sticking to your hands, the product is ready.

Many of the ingredients in fluffy are interchangeable. Therefore, if you want to make it according to a specific recipe, but some of the components are missing, you can take an analogue instead. The main thing is to adjust the proportions so that the mixture is not solid.

Tips & Tricks

To make the handgum come out elastic, not stick, follow the recommendations:

• Choose fresh and thick glue. Liquid or dried material is not suitable for making slime.
• If your recipe uses toothpaste, use a white thick one. Do not add gel-based dentifrices; they thin the formulation.
• Stir the mixture thoroughly and for a long time, then knead the composition with your hands. These measures help to achieve the desired texture of the handgam.
• To make the slime look interesting, add sparkles, foil cut into pieces, glitter, beads.
• If the toy doesn't stretch well, add water or shampoo. Thicken the liquid slime with an additional portion of the nasal drop.
• Play the slime with clean hands.
• Do not let the handgum touch dusty or fluffy surfaces.
• Don't wash the slime; make a new one instead.
• Store the toy in an airtight container in the refrigerator, regularly adding salt water.

How to make slime from Naphtizin - watch the video:

Naphthyzine is an excellent substitute for sodium tetraborate. A 10-ml bottle in a pharmacy costs only 20-30 rubles, it is enough for several slimes. Use nasal drops to thicken the composition and delight your child with a new toy.

The chemical composition of slime at home

Many children, if they are forbidden to do something, still do it for evil. So even if their parents do not allow them to buy a slime out of fear for their own health, the guys begin to play young chemists and create toys on their own. Due to the availability of the Internet, finding suitable recipes is not a problem, there are plenty of them. But again, not all of them can be implemented.

Such a slime can be made at home.

As in production, adhesives and activators are used at home. You can also buy food coloring to brighten the toy, use products such as shower gel, shampoo, dishwashing detergent, etc. Glitter is fine for decoration.

Thickeners for slimes (activators)

The activator is the most important part of the composition. It is he who will allow you to give all the necessary properties to the slime. Most often this is the same sodium tetraborate. But it can be replaced with a liquid for storing contact lenses, adding baking soda to it, using glycerin mixed with a solution of so-called borax (boric acid salt). To make a glue-free slime, you can use starch and dishwashing liquid.

Magnetic slime. This species differs from all the others both in color and in properties. It is widely available in stores but is very easy to make at home. To prepare such a slime, you will need to buy magnetic chips, and to play with it - a magnet. Ingredients: ¼ tbsp. diluted starch; 2 tbsp. l. magnetic shavings; ¼ Art. PVA glue
Your child will have fun playing with magnetic slime
DIY edible slime