How to make a shower gel slime at home: 11 ways to store a slime

From shower gel and lip tint

It is the recommended tint that not only colors the toy, but also helps the base to stabilize faster. Therefore, a weak activator such as Naphthyzine with soda is used here. Moreover, it needs to be added very little, and the liquid should be stirred until a clot forms for a long time.

Making slime at home

1. The gel is sent to the mixing bowl first.
2. Tint goes there.
3. They must be mixed.
4. Then glue is poured into the total mass.
5. After mixing, put soda there.
6. It should also be added to the composition using a spoon.
7. The last thing they use is Naphtizin drops.
8. In the liquid, work with a spoon until curdling.
9. The final action is kneading the base by hand.

We recommend reading about how to make a shaving foam slime. From the article you will learn about recipes for slimes made from shaving foam and PVA glue, shampoo, plasticine, sodium tetraborate and other components.

And here is more about how to make lizun from boric acid.

Shower gel is one of the important ingredients in slimes and is found in almost every recipe. But you need to add it in reasonable quantities, otherwise you will have to pour more activator, and the toy will turn out to be soapy. Alternatively, you can replace the product with shampoo, liquid soap, or dishwashing gel.

Video recipe for a shower gel and lip tint slime:

Slime recipes

To prepare a slime at home, you do not need to purchase anything extra. Components for many recipes for creating an anti-stress toy - shower gel, soda, salt, toothpaste, shampoo - are in every home.

Popular ways to make slime:

• with sodium tetraborate and PVA glue;
• with starch;
• with shampoo;
• with toothpaste;
• With salt;
• with soda;
• with a film mask;
• with a thickener for cream;
• with flour;
• with shaving foam.

Slimes made with flour, shampoo, or baking soda are best for young children.

With sodium tetraborate and PVA glue

Ingredients:

• Shower gel - 3 tablespoons.
• PVA glue - 1 tube.
• Sodium tetraborate - 2-3 drops.

Cooking method:

1. In a glass container, mix the glue and shower gel until foamy.
2. Add sodium tetraborate.
3. Knead the slime like a dough. When the substance begins to peel off the walls, the slime is ready.

Sodium tetraborate can be hazardous to health if the recommended dose is exceeded. Slime made with this recipe is not suitable for babies.

With starch

Ingredients:

• Shower gel - 100 milliliters.
• Water - 100 milliliters.
• Starch - depending on the consistency of the mixture.
• Water - 1 teaspoon (optional).

How to do:

1. Mix shower gel and water in a plastic bowl.
2. Gradually add starch to the resulting base. When the mixture begins to lag behind the walls, the slime is ready.
3. If the mass comes out too thick, pour a teaspoon of water into it.
4. Send the resulting slime to the refrigerator for 12 hours.

With shampoo

Ingredients:

• Shampoo - 150 milliliters.
• Shower gel - 150 milliliters.
• Sequins (optional).

Cooking method:

1. Mix the main components in a container in a 1: 1 ratio, add glitter if necessary.
2. Place the mixture in the refrigerator for 1 hour.
3. The slime is ready.

Store the finished slime in the refrigerator, without allowing the temperature to rise, otherwise it will lose its properties.

With toothpaste

Ingredients:

• Shower gel - ¼ glass.
• Toothpaste - 1 tube.

Cooking method:

1. In a glass or enamel bowl, combine shower gel and toothpaste.
2. Place in the freezer for 30 minutes.
3. The slime is ready to use.

Place the cooled slime in a salt solution (1 tablespoon per 200 milliliters of water), cover with foil and refrigerate for 2 hours. Such a slime will be more durable and durable.

With salt

Ingredients:

• Shower gel - 3 tablespoons.
• Shampoo (optional) - 3 tablespoons.
• Salt - 2 teaspoons.
• Water - 2 tablespoons.

Cooking method:

1. Combine shampoo and shower gel in a glass container.
2. Add a solution of salt with water to the resulting mixture.
3. To stir thoroughly.
4. Refrigerate for several hours.
5. The slime is ready.

With film mask

Ingredients:

• Shower gel - 2 tablespoons.
• Baking soda - 2 tablespoons
• Water - 1/3 cup.
• Film mask (transparent) - ¼ tube.

Cooking method:

1. Mix shower gel with baking soda.
2. Add room temperature water.
3. Squeeze a quarter tube of a cosmetic mask into the resulting mixture.

Mix the finished composition well. Gradually, the mass will curl up and turn into a handgam.

With soda

Ingredients:

• Shower gel - 3 tablespoons.
• Soda - 2 tablespoons.

Cooking method:

1. Place the container of gel in the refrigerator for 30 minutes.
2. Gradually add baking soda to the cooled gel mass.
3. Stir well until a fluffy slime is obtained.

Baking soda is a substitute for sodium tetraborate. Even parents who fear the harmful effects of borax can use this recipe.

With a thickener for cream

Ingredients:

• Shower gel - 3 tablespoons.
• Cream thickener - 1 sachet.
• Water - 1 teaspoon.

Cooking method:

1. Refrigerate the gel for half an hour.
2. Add thickener, stir well.
3. Pour water into the resulting mixture to increase its plasticity.

With flour

Ingredients:

• Shower gel - 4 tablespoons.
• Flour - 2 tablespoons.
• Vegetable oil for lubricating hands.

Cooking method:

1. Mix the main ingredients in a glass or enamel bowl.
2. Lubricate your hands with vegetable oil.
3. Knead the mixture until smooth.
4. Slime is ready!

With shaving foam

Ingredients:

• Shower gel - 2 tablespoons.
• Shaving foam - 1/3 bottle.
• Silicate glue - 1 tube.
• Wooden stirring stick.

Cooking method:

1. Squeeze out the required amount of foam and a tube of glue into a deep container.
2. Mix gently with a wooden stick.
3. Add 2 tablespoons of gel.
4. Knead the mixture in your hands until tender (about 10 minutes).

This slime is suitable for older children - the components in its composition are unsafe for babies.

Tips & Tricks

For the best result, there are several tricks when creating a handgam:

• The vinegar will help give the mixture more elasticity.
• If the slime is too dry, add a teaspoon of water. A pinch of salt will help remove excess moisture.
• The essential oil will give the slime a pleasant aroma and antiseptic properties.
• You can increase the volume of the toy by placing it in a container of water for a couple of hours.
• When creating a slime, you can add glitter, dye, or glycerin to the mixture to change the color and consistency.

Store the handgam in an airtight plastic container in the refrigerator. Do not leave it in direct sunlight, away from dust and dirt. If there are edible components (flour, starch) in the toy, the toy is suitable for use for only a few days - in the future, mold may appear on it. If you follow the recommendations for making and storing the slime, it will become a safe and useful anti-stress entertainment for children.

How to make a slime with your own hands at home?

Despite the simple process of making a toy, the result does not always suit the slimers. To make a high-quality elastic mass, take note of proven recipes, strictly observe the proportions and follow the instructions.

A quick recipe from plactilin without glue

It's hard to believe that hand gum is easy to make with just three ingredients - plasticine, edible gelatin, and water. The action plan is as follows:

1. Pour 1 bag of gelatin into a saucepan and add the amount of water indicated on its package. Follow the instructions.
2. Leave the mixture for an hour.
3. After 60 minutes, place the pot on the stove and wait for all the granules to dissolve.
4. Mash the plasticine thoroughly and pour in water (at the rate of 100 g of the ingredient per 50 ml of water).
5. Add the gelatin mixture to the resulting mass and continue stirring until the consistency of the future toy becomes homogeneous.

Important. It is recommended to put the slime in the refrigerator until it thickens.

Starch slime

For the next recipe, more ingredients are required, but it will not be difficult to prepare a slime. The toy will stretch well and click nicely. You will need:

• 1 tbsp. l. starch;
• 25 ml PVA glue;
• 15 ml of stationery glue;
• half of Art. l. water, shampoo and shaving foam;
• ¼ h. L. hand creams;
• 2 drops of sodium tetraborate.

The cooking process is simple. To ensure that your hand gum is not inferior in quality to the one bought in the store, follow the instructions:

1. Pour stationery glue and PVA into a deep bowl.
2. Add starch and stir.
3. In another container, combine the shampoo with water and beat until foam appears, and then add the first mixture and shaving foam.
4. Squeeze the right amount of hand cream into a bowl.
5. The final touch is a couple of drops of sodium tetraborate.
6. Stir the resulting mass.

Shaving foam

On the basis of shaving foam, you can make a soft slime that stretches pleasantly, but does not tear. Prepare the following ingredients:

• 2 tsp starch;
• 2 tbsp. l. shaving foam;
• packaging of liquid clay;
• 1 tsp shampoo.

The cooking process is so simple that it won't take you more than 5 minutes.

1. First you need to combine clay and shaving foam in one container, then pour in 1 tsp. shampoo.
2. Add the starch and stir the mixture with a spoon, and then with your hands.

From soda and PVA glue

There are many recipes for slimes with the addition of soda, but usually they indicate that 500 g of the substance is required. If you do not plan to make slimes as a gift to all your friends, then it is better to prepare less elastic mass. You need to take:

• 2 tbsp. l. soda;
• 1 tsp lens fluids;
• half a package of PVA glue.

Attention. Gouache and food colors are not suitable for such a slime.

Better to prepare sequins or beads.

Procedure:

1. Combine baking soda and glue in one bowl.
2. Add lens fluid after mixing thoroughly.
3. Knead the mass in your hands until you get the desired consistency.

From shampoo and salt

It happens that there is no opportunity to go to the store, and only the most elementary ingredients are at hand. Salt and shampoo slime has a simple composition. To make a toy you need:

• 1 tbsp. l. shower gel and shampoo;
• 2 tbsp. l. soda and salt;
• 50 ml of water;
• deodorant spray.

1. Salt with soda is poured with water and the solution is stirred until all the ingredients are completely dissolved.
2. In another bowl, combine the gel and shampoo. If you want a bright slime, then it's time to add dye.
3. The contents of the two containers are mixed.
4. The resulting mixture is sprayed with deodorant for five minutes.
5. Mix everything thoroughly again and put the bowl briefly in the refrigerator.
6. Then add brine. Slime is ready.

Of sugar and water

Ingredients for sugar slime can be found in any home. For him you need:

• 1.5 tsp shampoo;
• half tsp. water and liquid soap;
• 6 tsp Sahara;
• about 2 pinches of baking soda.

To make hand gum, shampoo and soap are mixed together.

Then add water at room temperature, beat the mass with a spoon and add sugar.

It is necessary to mix everything carefully so that there are no grains left in the solution.

After that, the bowl is briefly put into the freezer.

When you take the hand gum out of the fridge, add the baking soda

Stir the mixture with a spoon and then with your hands.

Important. The toy will be the right consistency when it stops sticking to your palms.

Basic recipes

Slime is prepared from various ingredients.There are many recipes. Some of them do not give exactly the result that a person expects, or do not act at all. But there are those that have been tested by more than one lover of handmade toys.

Nasal drops

The slime for this recipe is transparent due to the list of components. It will take more time to prepare it, since there are no strong thickeners in the composition. What needs to be prepared:

• 20-30 g of water at room temperature;
• 0.5 tsp soda;
• 35-55 g of stationery glue;
• 1 pack of nose drops.

Slime is made as follows:

1. In a prepared bowl, baking soda dissolves in water.
2. After kneading, there should be no lumps left.
3. Then glue is added and everything is mixed again. The result should be a homogeneous mass.
4. Nasal drops are added little by little. After each portion, the liquid is mixed. Thus, the entire contents of the bottle are poured out.
5. After all the drops are added, and the mass acquires a homogeneous consistency, it is transferred to a plastic container. It is desirable that the container has a lid and is tightly closed.
6. In the cold, the slime should spend at least 3 hours. The time varies from 3 to 5 hours.

Nasal drops can be replaced with eye drops. A solution for contact lenses will also give a good result. For the recipe, one of these liquids will come in handy.

With shaving foam

Such a toy is being prepared from only two components. You will need foam and a tube of glue. Glue is squeezed into the container, to which foam is gradually added. The mass is thoroughly mixed until it becomes homogeneous.

Slime according to this recipe turns out to be white, but it can be given an interesting shade. It is worth adding 2-3 drops of coloring matter, and the toy becomes more interesting and unusual. If you add 2 colors at once, a marble pattern will be noticeable on the slime.

Of flour

The recipe has the advantage of being safe so that even small children can play with it. And due to the lack of glue in the composition of the slime, it turns out to be edible, which will please the baby even more. To make one slime, you need 300 g of flour, ¼ part of a glass of hot water and the same amount of cold. At the kneading stage, watercolor paint or gouache is added.

Flour is mixed with water until smooth. After that, it is removed in a cool place for 2-4 hours. Under the influence of cold, the mass becomes more elastic and stretches well, which is what is needed. Slime turns out to be unpretentious, but does not contain harmful components in the composition.

Air cloud

To make a slime, you will need a lot of ingredients. When finished, it resembles a marshmallow. What is necessary:

• liquid soap;
• silicate glue;
• shaving foam;
• sodium tetraborate;
• glitter, dye;
• sunflower oil.

Cooking steps:

1. A homogeneous mixture is made of glue and shaving foam.
2. After mixing, boron, soap and oil are added.
3. Everything is mixed again.

The mass is taken in hand and kneaded for a long time. It is best to do this with your hands. Used immediately without moving to cold.

With shampoo

For manufacturing, you need starch. Pasta is prepared with the help of water. For the recipe, it is the corn one that is taken. Shampoo is added to the mass, everything is mixed and sent to the refrigerator for 2-3 hours.

With liquid soap

It is prepared in two ways. In the first case, you will need polymer glue purchased at a hardware store. Two parts of liquid soap are mixed with three parts of glue. The final result of the slime depends on the type and color of the soap.

Cooking according to the second recipe, salt and soda are used instead of glue. After adding the components, the mass is mixed until smooth. In this case, salt plays the role of a thickener. If you add a large amount, you get rubber, so a little salt is poured in.

How to make from water and salt at home

For 200 ml of hot water, you will need 5 heaped teaspoons of salt.Using a spoon, the liquid is stirred until the salt is completely dissolved. Coloring agent is added as desired. Silicate glue is squeezed into the liquid. The size of the slime depends on its quantity. After that, the container is left in this state for 25-30 minutes, without stirring and other actions.

With the expiration of the specified time, the mass is slightly stirred with a stick, and the glue is pulled out of the water. Water is squeezed out, and the mass is kneaded a little by hand to get a homogeneous structure. After these actions, you can play with the slime. If a dye is used in the cooking process, a plastic container is taken, which is not a pity for this business. Expensive dishes can go bad.

With starch

Thanks to the starch in the composition, this slime turns out to be very soft, but not a spreading puddle. And you do not need to use glue, the specified volume of the mask-film is enough. That is, the toy turns out to be not only beautiful, but also cheap.

Easy recipe

• 14 ml film mask,
• 2 tbsp. l. starch
• 1 tsp hand creams,
• 5-6 st. l. shaving foam,
• 3-4 drops of gouache,
• 0.5-1 tsp solution for lenses.

Slime preparation method

The basis of the toy is a film mask, which is moved into a cup.

Hand cream is squeezed out to it.

The components are mixed for 2-3 minutes.

For volume and lightness of the toy, shaving foam is added to them.

The composition is mixed again, but carefully so that the foam does not settle.

The next ingredient is starch.

The base is mixed again so that it becomes homogeneous.

It's time to give the future slime a color, that is, add pigment, you can silver paint, and still work with a spatula.

The last required component is lens solution.

After adding it in portions, the base is thoroughly mixed with a spoon.

The thickened mass must be crumpled in the hands.

We recommend reading about how to make a slime out of glue. From the article you will learn how to make a slime from PVA glue, clerical, silicate, glue-stick, Titan and Moment glue.

And here is more about how to make a glossy slime.

Solutions for CL are more expensive than sodium tetraborate traditionally used in slimes. But a container of 240-250 ml is enough for a large number of slimes. And this activator is very suitable for beginners, as it is more difficult for them to reload the mass.

Be sure to watch the video on how to make fire slime with starch and lens fluid: