How to dilute hydrogen peroxide for watering indoor flowers

Potential harm to a home plant

Peroxide treatment has a beneficial effect on flowers of almost all types and has no contraindications for use. Its chemical composition resembles distilled water. For this reason, indoor flowers take it well.

Florists believe that the use of this tool only has a positive effect on the life of their green pets.

However, it is recommended to adhere to the following rules:

• before use, clean the soil from dried leaves and other debris;
• use only fresh solution;
• strictly observe the recommended dosage;
• do not apply several types of fertilizers at the same time;
• if a white bloom appears on the stems, leaves and roots, you need to stop feeding.

If you follow these guidelines, using peroxide will not harm your plants.

Important! Hydrogen peroxide is a powerful oxidizing agent, so its use is allowed only in a diluted form. If the frequency of watering a houseplant is 3-4 times a week, you cannot apply top dressing every time

For any processing methods, their frequency should not exceed once every 5-7 days.

Watering indoor plants with succinic acid

Succinic acid - transparent or white crystals, it is odorless, exudes a light lemon scent. This "vitamin" helps plants to improve vitality and resist many diseases.

Effects on plants

Plants with the help of succinic acid resist various negative environmental factors - with excessive humidity, dry air, high temperatures.

"Vitamin" has a beneficial effect on the immunity of flowers and plants - they become resistant to various diseases and pests.

Succinic acid can help improve the quality of the soil, because it breaks down toxins and prevents the accumulation of pathogenic microorganisms.

The acid acts as a cleansing agent on the soil from heavy metal salts, pesticides, etc.

Succinic acid is an excellent stimulant for plant metabolic processes. It is necessary for flower formation, as well as when soaking seeds and sprouts in order to obtain high-quality material for further planting.

Watering flowers and plants with succinic acid contributes to the fact that the content of chlorophyll in the leaves increases, and this contributes to the intensive absorption of fertilizers when they are introduced into the soil.

Experienced gardeners use succinic acid as a first aid to flowers if they have suffered from root rot, all kinds of pests. Spraying with a solution helps the plant recover faster.

How to properly prepare a solution

Only water and crystals are used for the solution. It is necessary to dissolve 1 gram of succinic acid in a small amount of water, and then use water to bring the volume to a liter.

Attention! The solution is stored only three days after preparation, because then it will lose its beneficial properties, which means it will become useless.

• If it is only necessary to activate the growth of shoots, then it is necessary to spray the aerial part of the flower with a solution twice after 3 weeks.
• If it is necessary to stimulate the development of roots, then the roots should be soaked in the solution for 30-40 minutes.
• If you need to root the cuttings, then soak them in the solution for a day before planting.
• If you want to get high-quality seeds, then soak in a solution before planting, and then be sure to dry well. It's okay if you leave the seeds in the solution itself before sprouting.
• If you need to reanimate the affected plant, then spray it with a concentrated solution. Repeat the procedure several times.
• If you want to do manipulations for prevention, then spray the plant once a month, then its strength for life will increase significantly.

The effect of watering and feeding with hydrogen peroxide

Hydrogen peroxide has a very good effect on most living organisms, so various plants are no exception. In the natural environment, plants receive water through rain and snow melting. This water is most suitable for its chemical composition, seedlings and houseplants. But it is difficult to constantly collect such water, and then this problem can be solved with the help of an aqueous solution of hydrogen peroxide. The chemical composition of peroxide contains atomic oxygen, which, in addition to disinfecting and cleaning the soil, additionally supplies the plant with oxygen. Such solutions can be watered with seedlings, flowers, tomatoes (tomatoes), cucumbers, garlic and much more. You can also spray the leaves from a spray bottle, do foliar feeding - this will also give a very good result.

Many people have learned from their own experience that when watering and feeding, seedlings grow much faster. The effect can be seen just a couple of hours after feeding. The seedlings begin to gain strength, and the green mass increases, subsequently the fruiting of seedlings, which were watered and fed with peroxide, is much higher. The yield of tomatoes and peppers is significantly increased.

If we water with a solution of peroxide, then it penetrates into the roots through the soil and forms oxygen, which has a beneficial effect on the roots of the plant, especially if the soil has not changed for a long time - this is a very relevant remedy for plants that have been sitting in a pot for a very, very long time. Such feeding will enrich them, filling the soil with oxygen.

This type of feeding is also well suited for dived seedlings. She begins to recover much faster, and her root system quickly comes to a good state. Summer residents and gardeners have received such results many times. Peroxide certainly has a positive effect on vegetation and is a growth stimulant. Indeed, with the addition of peroxide, the water is additionally saturated with oxygen. If your water in the country is of poor quality, you can also add hydrogen peroxide to it, it will significantly improve its properties.

Here the opinions of different people differ. There are those who add only a few drops, and there are those who make the concentration of the solution quite strong. We recommend breeding for feeding seedlings and flowers:

Experience has shown that this is the most optimal concentration of the solution, which gives a very good and stable effect.

Foliar spraying has a very beneficial effect on the plant. The concentration can be kept the same as for irrigation. Using a sprayer, the foliage of the seedlings is sprayed. This is especially useful for tomatoes, as it is an excellent prevention of late blight. It is most effective to combine two methods: watering and spraying.

You can feed it both on an ongoing basis and alternating with watering with plain water.

In order to accelerate the germination of seeds, they can be soaked in hydrogen peroxide (3%), the duration of soaking is 9-11 hours for cabbage seeds, and about one day for tomatoes and beets.

To disinfect seeds, they need to be treated with 10% hydrogen peroxide for 15 minutes. After the seeds have lain in peroxide, they need to be rinsed and dried.

Treatment of fungal diseases

Watering with peroxide is also a great way to prevent fungal infections in seedlings and other plants. A standard proportion is taken: 2 tablespoons of peroxide per liter of water and watering and spraying is carried out.

For those who cannot or do not like to work in the garden with gloves, there is a great way to clean your hands.

We take 3% hydrogen peroxide (about 100 g), add 10 g of ammonia and a little detergent to it.

Place dirty hands in the resulting solution and hold for a while. Then wash your hands thoroughly with soap and water. The main thing is to be careful and avoid getting the solution in the eyes. After the procedure, you can apply cream to your hands, this will additionally moisturize and restore the skin.

Increasing the shelf life of vegetables and fruits

Fill a basin or sink with cold water, add 70 grams of hydrogen peroxide to it. Place vegetables in this water and let sit for 15 minutes. Then remove, rinse with running water, wipe and dry. This method will help wash off various chemicals from the surface of the fruit and disinfect it. Due to this, the shelf life is significantly increased.

What gives flowers hydrogen peroxide

• It accelerates the growth of flowerpots. This is especially true if you dream that your former stalk will finally take shape into an adult plant.
• Strengthens small roots, helping the young flowerpot to take root faster.
• Saturates the potting soil with oxygen.
• It acts as a fungicide, slightly disinfecting the plant.
• Poses a threat to pests, especially those that have just started.
• Helps in the fertilization process.
• Also, this substance has another amazing effect: getting into tap water, peroxide displaces chlorine, which is dangerous for plants. Peroxide also displaces pesticides from the soil and crops growing in it.

This universal remedy should be used for damaged, weakened flowers - peroxide acts gently, without harming an already weakened "pet". In addition, it has performed well during periods of transition.

In floriculture, 3% peroxide is used. It is about her that I will talk below.

Can this solution replace top dressing

Many blogs write that yes - they say, peroxide has all the necessary trace elements in its composition, so it is not worth combining it with other nutrients in order to avoid overdose. But I will allow myself to disagree with this. The peroxide formula, as I said, is H2O2.

There is no calcium, no potassium, no phosphorus ... Therefore, I would not say that peroxide itself can give something to flower crops.

Rather, it acts as an enhancer for the absorption of nutrients from the soil by the roots.

So if your flower grows in fresh soil, which contains peat, humus and other "tasty" (from the point of view of a flower) substances, then yes, after pouring peroxide, you do not need to pour anything else into the pot. You will saturate the soil with oxygen, strengthen the work of the roots, and then the flower will take care of itself.

If your flowerpot grows in a rather "shabby" soil, I would recommend that you water it with something else. It is not necessary to buy a mineral composition, there are many effective folk methods - for example, the same honey, which can even be added to water with peroxide.

By the way, there are other, richer pharmacy dressings for flowerpots. For example, diluted aloe juice. This solution helps houseplants to bloom profusely and acquire simply gorgeous foliage. Here's how to apply it:

How does peroxide work

Even from school, many remember the formula for water - H2O. The peroxide formula is almost the same, only it contains 1 more oxygen atom - Н2О2. Water after a thunderstorm has a similar formula (and it is highly recommended to use it for irrigation).

This additional oxygen works as an oxidizing agent, it is he who fights against fungal diseases and pests.

True, in "wild" (that is, rain) water, this oxygen atom is quickly lost, and in peroxide it is unstable. Getting into the water for irrigation, and then into the pot, the solution quickly releases an oxygen atom, which goes into this very soil, saturating it.

How to properly water flowerpots with this remedy

In the summer, we often put indoor flowers on an open veranda or an unglazed balcony.In addition to clean air, our flowerpots thus get access to rainwater, which is very useful for them. In winter, such a luxury is not available to them, so we should take care of the flowers on our own.

An indication for such watering is the presence of withered, dry leaves in flowers. But completely healthy flowerpots also need oxygen. Peroxide can also be used for seedlings.

A solution that is suitable for almost all home pots (except for cultures that prefer distillate - but there are only a few of them): 2 tablespoons of peroxide + 1 liter of water.

This "hydrogen water" is watered once a week. If your flowers require more water, water them more often, but make the solution less concentrated by adding 10 to 15 drops of peroxide to the same liter of water.

You will see the result of such watering after 2-4 procedures.

Even root rot will not be a contraindication to hydrogen irrigation. On the contrary, if you overfilled the flowerpot and because of this are now treating its roots, water with peroxide will help them recover faster.

Soaking seeds in peroxide

This procedure saturates the seed with oxygen, stimulates, strengthens, and disinfects.

You need to do everything like this:

1. Mix a glass of water (250 ml) and 25 drops of peroxide.
2. Dip the seeds in this solution for half an hour.
3. Remove seeds, rinse under clean water (for example, put in a sieve and bring to a tap).

If you have seeds of a crop with very poor germination, they can be kept in peroxide for up to a day.

Features of using hydrogen peroxide for flowers

Hydrogen peroxide diluted in water can be used in different dosages for different purposes. So, solutions are often used in order to water or spray a flower, soak seeds and neutralize parasites.

Foliage spraying

For spraying, add 10 ml of hydrogen peroxide to 1 liter of water. The resulting mixture is thoroughly mixed. The solution is poured into a spray container with a fine spray nozzle and sealed. Spraying must be done along the leaf plate, evenly distributing the liquid over the surface. There is no need to wipe the leaf surface after spraying.

Once on the leaf, the agent will significantly accelerate the metabolic processes of the plant, improve the functioning of connective tissues, and also accelerate intercellular metabolism. It is impossible not to mention the mechanical cleaning of the leaf surface from dust, small particles and microorganisms, which not only clog the pores, but can also provoke the onset of diseases. Oxygen dissolved in water saturates the substrate, which improves the functioning of the root system.

Spraying with peroxide

Can I water flowers with peroxide?

Watering indoor plants with peroxide is recommended by flower growers. Thanks to the action of the active substance, the substrate is saturated with oxygen, which improves the functioning of the root system, neutralizes all bacteria and enhances flower growth.

Very often, indoor plants are watered with running tap water, however, it is too hard and contains a large amount of calcium and magnesium salts, the presence of which negatively affects the growth of the plant. That is why it is recommended to prepare a solution of peroxide for watering.

Irrigation solution

To prepare it, 20 ml of 3% peroxide is added to 1 liter of running water. The resulting mixture is thoroughly mixed. Watering with this solution is recommended every 5 days. Before watering, it is imperative to remove all dried leaves and other debris from the pot, and also fluff the top layer of the substrate a little.

The same solution can be used to disinfect damaged areas of the plant. Adding 1 tablespoon of sugar to this mixture will make it a great leaf sprinkler.

Seed treatment

Treatment of seeds with hydrogen peroxide provides not only disinfection of seeds, but also increases the likelihood of rapid emergence.The substance acts on growth inhibitors inside the seeds, preventing them from inhibiting germination. The seeds are completely soaked in peroxide, initially leaving them in warm water for half an hour in order to soften the outer shell.

Note: Florists recommend treating all seeds to disinfect microorganisms. There are also a number of seeds that have special indications for processing: with a thick outer shell, with a high content of esters and flower seeds.

For soaking in 0.5 l of water, add 1 tablespoon of peroxide and leave the seeds for 3 hours. Soak them on napkins or in shallow containers. Then they are washed with water, dried and sown in the ground.

Pest control

Due to the bactericidal properties of peroxide, it is used to treat bacterial and fungal infections, as well as when parasites appear.

To prepare the mixture, you need to take half a liter of water, add 60 drops of peroxide and 80 drops of iodine. Scabbards, ticks, worms and midges, which most often parasitize houseplants, are afraid of this remedy.

Root dressing

Adding a few drops of the product when watering is a great alternative to fertilizing. In addition, with this use of peroxide, the plant does not need additional fertilizing, since it completely replaces them.

Potential harm to the plant and precautions

Experts say that the use of this substance is not harmful to plants. Regardless, they recommend using peroxide in moderation according to recipes. Hydrogen peroxide is considered a strong oxidizing agent, therefore it is used only in a diluted form. If you need frequent watering, its amount is not increased.

Important! In addition, it is not recommended to use the drug if white spots appear on the substrate that look like mold.

Hydrogen peroxide

Mix hydrogen peroxide with water (20 ml of hydrogen peroxide per liter of water) and water the plants approximately every 4-5 days. Dosage - 3% hydrogen peroxide (pharmacy):

• For resuscitation and rehabilitation of old soil - 3 ml per liter of water.
• For the preparation of irrigation water - 1 ml per 5 liters.
• For regular watering - 5-10 drops per 1 liter of water.
• For disinfection of planting material - without dilution.

A comment. Tips boil down to the possibility of saturating the irrigation water with oxygen. Plant roots are able to consume water only in the presence of oxygen. This can come from oxygenated water (flowing river water with a compressor running) or water vapor-saturated air (fog or greenhouse atmosphere).

But how effective is it to oxygenate water with peroxide? In dilute solutions, hydrogen peroxide is unstable and decomposes spontaneously into water and oxygen. In this case, one oxygen molecule is formed from 2 molecules of peroxide. By adding 10 drops of pharmacy hydrogen peroxide (3%) per liter of water, we will enrich it with 7 mg of oxygen, while ordinary water contains about 8-9 mg of oxygen. This amount is consumed by a well-developed root system in about an hour. The saturation effect will be very short-lived. For a good and constant supply of oxygen to the roots, it is enough to properly prepare the soil for planting by adding loosening components such as perlite, vermiculite, bark, sand, and small pebbles to it. Thus, small air passages and spaces are created in the substrate, which provide the roots with the necessary oxygen, while this method is the most natural

It is also important to observe the correct watering regime. Often waterlogging of the soil, in which all air passages are blocked, ultimately leads to dehydration, inability to assimilate water, and to loss of turgor by plant leaves

Compliance with simple rules for soil preparation and watering will be more effective than using peroxide solutions.

It is recommended to use peroxide solutions to heal old soils by adding more peroxide to the irrigation water (3 ml per 1 liter of water). But in pots with large plants, which, due to their size, are rarely transplanted or not transplanted at all, the roots grow strongly and occupy almost the entire volume, there is little soil and it is densely penetrated with roots, there are formed quite small holes for air. Surely many have noticed that when watering such plants, the water quietly passes through the entire volume, without stagnating.

During the decomposition of peroxide, atomic oxygen can be formed, which is a strong oxidant and has a detrimental effect on all cells, not only on pathogenic microflora, but also on beneficial microorganisms, as well as on the cells of the plant itself. It is impossible to use concentrated peroxide solutions for irrigation.

It is permissible to use pharmacy hydrogen peroxide (3%) undiluted for seed treatment before planting. Many seeds are spread by animals, pass through the aggressive environment of their digestive systems, and their protective seed coats are adapted to such influences, and for some seeds such treatments are even necessary for germination.

Hydrogen peroxide - a health recipe for seeds

.

If you don't have potassium permanganate or a store-bought preparation at hand, you can successfully disinfect the seeds with hydrogen peroxide. It destroys bacteria and fungi. As a result, plants with strong immunity grow from the treated seeds, which are less likely to infect diseases.

Also, hydrogen peroxide will soften the seed coat and accelerate germination. The germination rate of tomatoes after processing can reach 90%, corn - 95%. And if you soak cabbage seeds in peroxide, then the first sprouts will appear several days earlier than usual. It is especially useful to use a product for tough-like seeds of squash, pumpkin and peppers.

To pickle the seeds, cover them with 10% peroxide solution for 15-20 minutes. Then rinse with clean water and dry.

To stimulate germination, dilute 1 tbsp. 3% peroxide in 500 ml of water and immerse the seeds in the liquid for 12 hours, for tight seeds - for a day. The solution must be changed every 4 hours so that the seed does not suffocate and die.

Do not use metal containers to soak seeds in hydrogen peroxide, because the metal will oxidize. Also, do not use the product together with other drugs to prevent the occurrence of dangerous chemical reactions.

Ways to use hydrogen peroxide

Peroxide is a well-known drug sold in pharmacies, which is colorless and odorless, and is highly soluble in water.

Usually pharmacies offer the substance at a concentration of 3%. It differs from water in the presence of an additional oxygen atom, which is quickly lost by the substance. The liberated oxygen is easily aerated into the soil.

The antiseptic effects of liquids are well known. It also disinfects, cleanses, has a healing effect.

There is no toxicity in the solution, but caution is required in use, since too high a concentration of the agent causes irritation of the mucous membranes, skin

Germinating seeds

For germination of seeds, various preparations have always been used to ensure good growth of the plant, to increase resistance to diseases. Peroxide provides all this even more effectively than potassium permanganate.

Peroxide allows you to pickle seeds, for this they take a 3% solution and soak the seeds in it for 30 minutes. After that, the seeds need to be washed and dried. This procedure will kill pathogenic flora that can form on the surface of the planting material. As a result, the seeds germinate quickly, the plants develop well, become very strong and branched.

Is it possible to water seedlings and adult plants with peroxide

According to numerous reviews, it can be said that watering young plant seedlings with peroxide significantly strengthens their roots, increases disease resistance, and disinfects the soil.

The released oxygen prevents decay processes, protects the roots with an excess of moisture

This is very important when planting plants in sticky or clayey soil, where natural drainage is difficult. Small roots are simply burned out by the liberated oxygen, which will completely save the whole plant from decay

Application for plants

Practical methods for using peroxide are very diverse. It has become an effective remedy tested by many gardeners.

Watch the video! Attention !!! Hydrogen peroxide is not suitable for everyone!