7 homemade cleaning products

Home remedy recipes for washing

The benefits of using a natural cleanser are maximized when you correctly identify your skin type. After all, the drying and matting properties of products for oily skin are categorically not suitable for dry. If your skin periodically changes towards a more oily type, be sure to prepare two different products and wash with them alternately.

Products with large particles are not suitable for washing sensitive skin!

Cleansers for dry skin

Option one. Effectively removes makeup residues from the skin while maintaining the normal lipid layer. All you need to do is mix a strong decoction of wheat grains with a few drops of rose essential oil. For the broth, rinse the wheat, cover with water in a ratio of 1: 2, put on fire, bring to a boil and simmer over low heat for one hour. The water should partially boil away. Then remove from heat, cover tightly, wrap with a towel and let it brew for three hours. The broth should become slightly viscous. Strain it, add essential oil and mix thoroughly. Store the finished product in the refrigerator.
Option two. Softens and cleanses the skin, relieves the feeling of dryness and tightness. Take 4 sprigs of parsley, 1 tsp. honey, 200 ml of natural fat milk, 2 tbsp. dry chamomile flowers and 2 tbsp. calendula. Grind parsley, chamomile and calendula in a mortar until creamy. Put milk on fire and bring to a boil. Add the mixture of herbs and simmer, covered over low heat for half an hour. Milk should not boil. Then remove the mixture from heat and leave for several hours. Strain the finished product and add honey. Mix thoroughly with a whisk.
Option three. Suitable for very dry and flaky skin with a clear violation of the lipid layer. In a small bowl, combine the pulp of one ripe banana, 1 tsp. cornstarch, 50 ml warm water, 1 tbsp. scarlet juice and one egg yolk. Using a mixer or whisk, beat the mixture until smooth and fluffy. The output should be a jelly-like product. Store the mixture in a cool place for no longer than a week.

Facial cleansers for oily skin

Option one. Thoroughly cleanses the skin from impurities, while not drying it out and not disturbing the acid-base balance. Mix 2 tablespoons. rice flour, 2 tbsp. oat bran, 5 drops of tea tree essential oil and 200 ml of warm water. Stir the mixture until smooth. If you have oily but sensitive skin, grind the oat bran vigorously. Wash your face with this mixture every night.
Option two. Deeply cleanses pores, fights subcutaneous inflammation, and reduces the appearance of blackheads. Prepare 2 tablespoons. mustard powder, 1 tsp. baking soda, 30 ml of low-fat kefir and 130 ml of warm water. Mix the mixture gently. During the mixing process, air bubbles will be released, because a chemical reaction will occur between kefir and soda. Once the bubbles are gone, the product is ready.
Option three. Intensively cleanses and dries oily skin, reduces inflammation, fights post-acne traces. You will need 1 tsp. freshly squeezed lemon juice, 1 tbsp. medium-fat cream, 1 tbsp. finely ground sea salt, 300 ml of heated mineral water. Mix all ingredients until smooth. Wash your face with this product in the morning or evening.

Cleansing products for hypersensitive skin

Option one. Gently cleanses and soothes irritated skin, relieves redness and itching. Mix 2 tablespoons. aloe juice, 1 tsp. powder of pink clay and 300 ml of boiled water.Heat the resulting mixture slightly in a water bath to dissolve all the ingredients. Wash your face with the resulting product every morning.
Option two. Soothes the skin, heals the damage and gently cleanses. You will need 3 slices of rye bread, 250 ml of low-fat cream, and 50 ml of warm water. Remove the crust from the bread, knead the crumb with your hands and cover with a mixture of cream and water. Leave to swell for two hours. Then you can grind the mixture to a mushy state using a blender. Wash your face with the resulting product twice a day.
Option three. Effectively cleanses, nourishes and regenerates delicate skin. Mix 2 tsp. liquid honey with 300 ml of mineral water, 2 tbsp. aloe juice and 1 tbsp. green clay. Heat the mixture slightly in a water bath and whisk until smooth. Wash your face once a day. After washing your face, rinse your skin with cool water and pat dry with a paper towel.

Annual cleaning

Professionals recommend cleaning with acetic acid every year. This method gets rid of mineral deposits, any kind of fungus and mold.

What to do:

The Jacuzzi is filled with water above the upper nozzles.
Then 1 liter of food-grade acetic acid is poured.
Turn on the pump for 1 minute.
Then it is turned off, and the liquid is left in a bowl for 12 hours.
After this time, you should drain the water, draw in clean water and turn on the pump for 5 minutes. During this time, all internal details will be washed.

At the end, the jacuzzi turns off, the waste liquid turns off and the surface of the bowl is rinsed with clean water.

Peeling types and their features

Chemical peels can be superficial, medium and deep. Each type has its own characteristics and is designed to eliminate defects of varying degrees of complexity: from lightening to eliminating scars. For home procedures, painless and safe products are used that will not cause severe harm to the face. It should be noted that it should be carried out by a specialist in a professional salon, since an incorrectly selected concentration of acids can leave a serious burn on the skin.

Superficial peeling. Gently exfoliates dead skin cells and cleanses the skin, giving it a healthy look and elasticity. For peeling, gentle preparations based on fruit acids are used. The procedure is perfect for removing pigmentation and leveling microrelief at home.
Median type peeling. With such face cleansing, chemicals act deeper than with superficial peeling, therefore they can eliminate age-related pigmentation, scars left by acne, fine wrinkles, acne, keratoses, etc. For the procedure, salicylic and trichloroacetic acid or combined formulations are used

Cleaning the face of an average type can be performed not only in the salon, but also at home, but subject to precautions and strict adherence to the instructions.
Deep peeling. The procedure involves the penetration of a chemical deep into the dermis, which allows you to eliminate significant skin defects and completely restore it.

This type of peeling allows you to get rid of scars, stretch marks, deep wrinkles, scars, etc. A deep one is not carried out, since it provokes a severe burn, which can be compared with a surgical operation that requires a competent approach. For facial cleansing, special mixtures are prepared based on active acids in the required concentration, based on the characteristics of the patient's skin.

Features of cleaning acrylic bathtubs

After the repair and installation of a new snow-white beauty, the question arises about the features of caring for her. If cast iron is a patient material, then acrylic requires a more careful attitude. Not every product you buy is suitable for cleaning your bathtub.

In order for the acrylic coating to last a long time and not lose its original appearance, follow the rules:

Take a good look at commercially available cleaning pastes.They should not contain chlorine, acids and other aggressive substances.
Choose products marked "for acrylic bathtubs."
Powders are not suitable for cleaning plumbing.
Use a soft sponge or cloth to clean. Brushes and metal scrapers leave scratches.
Do not place objects in the bathtub that could scratch the coating.

Following a number of simple rules, your plumbing will remain white for a long time. If the care instructions are violated, after several applications of alkaline and abrasive products, the bath will acquire a yellow tint.

Advice! Eliminate chemical attack on the material. Make a mild cleanser at home.

Cleansing the body of toxins and toxins with folk remedies at home

Below are the best recipes for cleansing the body.

1. Before you cleanse the body of toxins, you need to cleanse the intestines. To do this, prepare an infusion of the herb of dreaming (pour 3 teaspoons of the herb with 2 cups of boiled water, leave for 2 hours, strain). Drink it for 10 days according to the following scheme: 1st day, 1 tbsp. spoon 3 times a day 15-30 minutes before meals, 2nd day - 2 tbsp. spoons. Then take a break for 5 days, after which you drink again for 2 days to sleep. Again a break - and again to fall asleep, etc., in order to fall asleep they drank for 10 days.

2. After the intestines are cleansed, you can begin to cleanse the liver. The easiest way is to drink vegetable oil for 5 weeks, preferably cold-pressed olive oil. You need to drink oil in the morning before meals. You should start with a very small dose (less than a teaspoon within a week), gradually increasing it. The second week, drink 1 tsp, the third - 1 dec., The fourth - 1 tbsp. spoon.

Another homemade recipe for cleansing the body is to drink 3-5 times a day a glass of a mixture of the juice of one lemon with hot water and half a glass of carrot, beetroot and cucumber juice. And so for several days.

Another excellent folk remedy for cleansing the body of toxins is a mixture of horseradish, honey and lemon juice. To prepare it in 150 g of horseradish root gruel, you need to add 1-2 tbsp. spoons of honey and juice of 2-3 lemons, mix and take 2 times a day for 1/2 teaspoon 15-20 minutes before meals.

At first, you will experience dizziness, watery eyes, but be patient. After using the entire portion of the product, you need to take a mixture of carrot juice and black radish (1: 1) for 7-10 days, which will help remove the mucus from the body that is separated as a result of horseradish intake, and restore the mucous membrane of the gastrointestinal tract and genitourinary system. But this folk remedy for cleansing the body of toxins is very effective.

How to clean tubing in a hot tub

When buying any item, especially one with a mechanism, you should be careful about the operation of such things. A jacuzzi or hot tub is quite common. And the question of cleaning this product is very interesting, because untimely procedures can lead to rapid wear of parts, and most importantly, to malfunction of both one element and the entire system as a whole.

We clean the tank

To make the cleansing process easier, the jacuzzi should be rinsed after each session. To do this, you can simply rinse or wipe with a soft cloth and detergent. By the way, the liquid should be as gentle as possible, not contain acids and other aggressive components. You can use a specially formulated jacuzzi cleaning solution. This is ideal because it doesn't foam or clog whirlpool tubing, which we'll talk about cleaning later. However, the use of solutions every day is not recommended.

Basic cleaning and maintenance should be done once a month. To do this, you first need to fill the tank with water. Moreover, the water must cover all the nozzles of the system. After that, a little disinfectant solution must be added to the water.It is commercially available or you can cook it yourself. To do this, it will be enough to pour a weak chlorine solution into the tank, approximately 10-15 ml per liter of water.

After that, you need to turn on the system. The pumps should run for just a few minutes. Then they turn off, and wait for 20-30 minutes, after which the water can be drained. But that's not all, then you need to collect the same amount of clean water and repeat the procedure.

Cleaning tubes and filters

Here it is necessary to take into account the model of the jacuzzi, therefore saving the operating instructions is mandatory. It explains how to remove the filters. The same goes for the tubing in the hot tub. After all, from the inside, it is a whole interweaving of tubes of different diameters. Corrugated polymer products are most often used because they are more flexible, which is necessary for the shape of the tank. These tubes, thanks to their smooth inner coating, do not collect deposits and dirt inside, but they must be periodically cleaned.

So, in order to clean the tubes efficiently with your own hands, you need to remove them, in those places where possible. But, again, without instructions, and sometimes a photo of additions to it, it is strongly not recommended to touch anything on your own, because improper dismantling and connection can lead to breakdown, which will be quite noticeable in the repair.

After some pipes have been removed, they can be cleaned under the pressure of water, even without the use of a special tool. The only moment, the pressure must be strong enough. The same procedure is performed in cases where they are clogged. Although it is worth noting that this is very rare, and with proper operation of the reservoir, it is completely unlikely. If the water doesn't work, you can use a long, dense wire wrapped in gauze. It is quite possible to do it yourself.

Tubing prophylaxis should be performed no more than 1-2 times a year. This will be enough. By the way, you need to take care of this at the stage of installing the bath. That is, if the decision to take a whirlpool bath is final, it is necessary not only to allocate space for it, but also to provide access to the system itself, that is, the same pipes and pump. To do this, you can close them with a special screen under the bathtub, which will allow you to well hide everything unnecessary, but at the same time will provide convenient access to the "heart" of the whirlpool tub.

As for how to clean the tubing in the hot tub, if you can't get to them, you can use a special cleaning agent and use the pump-on method again. In this case, the system will clean itself, and a special solution will help remove impurities by removing it through the nozzles in the tank.

Eventually…

If none of the above remedies work, for example, due to very bad water (which sometimes happens), it is better to consult a specialist and use also water softeners.

How to remove rust and limescale from an acrylic bathtub, cleaning after renovation and very dirty bathtubs

Over time, rust can form on the bathroom.

The joints of the bathtub with a tap and other metal products are especially susceptible to corrosion. Only special powders will help get rid of the red misfortune.

To prevent rust formation, keep the mixer taps clean.

Important! Acrylic products require daily maintenance. After cleaning the bath, wipe the surface with a dry cloth .. The method of removing limestone depends on the degree of dirt.

Such a plaque can be removed with soda and vinegar, a very dirty bath can only be washed with store-bought creams like Sif or Mr. Chister.

The method of getting rid of limestone depends on the degree of pollution. Such a plaque can be removed with soda and vinegar, a very dirty bath can only be washed with store-bought creams like Sif or Mr. Chister.

Do not use hard brushes to scrape off limescale, otherwise the bathtub will be scratched.

Review of the best store products

If there is no time to use homemade tools at hand, the stores have household chemicals for any occasion - gels, powders, pastes, sprays:

Cillit Bang - suitable for systematic cleaning, it cannot cope with old, neglected stains;
Comet in the form of a gel will help clean out difficult dirt, suitable for cast-iron bathtubs;
Domestos washes away dirt of medium complexity, has a pungent smell of bleach;
Sun Wedge, Triton, Mister Chister - suitable for cleaning acrylic, whirlpool baths at home. There is no acid in the composition, they do not scratch the surface;
Sanox washes away red spots, but corrodes the coating;
Sanita Anti-rust - allows you to remove not too ingrained rust;
Cif - universal, there are no abrasives in the composition, only microgranules. Washes away stubborn dirt without damaging the enamel.

It is necessary to carefully read the composition of the product in order to know what type of bath it is suitable for, how to apply and rinse off correctly. Overexposing the composition on the surface can damage the coating.

Hemosorption blood purification method

In medicine, hemosorption is used as a method of blood purification (from the Greek haema blood + Latin sorbere to absorb), aimed at removing various toxic products from the blood and regulating homeostasis by contacting the blood with the sorbent outside the body. This is a kind of sorption process, in which particles of the absorbed substance and absorbers enter into chemical interactions.

Hemisorption is a method of extrarenal purification of blood from toxic substances by adsorption of poison on the surface of the sorbent. As sorbents, activated carbon (hemocarboperfusion) or ion-exchange resins are used, designed to purify the blood from certain groups of chemicals.

General tips for cleaning acrylic bathtubs

To quickly wash the bath and preserve the result for a long time, you should adhere to simple rules:

It is better to use warm water for washing - it is much easier to wash off dirt and grease. With regular maintenance, warm water and a sponge are sufficient to remove everyday stains.
After the detergents, the bath is rinsed and wiped dry with a desiccant cloth or microfiber, cellulose or bamboo sponge.
Periodically, it is advisable to use wax-based polishes: they give the surface additional smoothness and dirt-repellent properties.
When using vinegar or special means, one should not forget about protecting the skin of the hands and upper respiratory tract, therefore, gloves and, if possible, a respirator should be worn. Good ventilation is essential during and after the procedure.

How not to handle acrylic

Acrylic is a durable polymer material and a bathtub made of it will last a long time if mechanical and chemical damage to the surface is avoided, namely:

Do not use aggressive cleaning agents based on chlorine, concentrated acids and strong alkalis (Domestos, Whiteness, Pemolux). Due to chlorine, the bath can turn yellow, and caustic substances can destroy the acrylic layer and provoke the appearance of cracks.
Do not use hard brushes and metal scrapers for cleaning - they easily scratch acrylic. Polymers are characterized by a non-porous surface, therefore, with proper care, there is no place for dirt to accumulate and there is no need for rough cleaning. But when defects appear, dirt easily gets into the places of damage.

Purchased cleaning products

Experienced housewives advise: before starting the procedure and cleaning the acrylic bathtub, you should test the product yourself. To do this, it is squeezed onto the hand and "probed": there should be no sharp crystals in the preparation.

Another test option is to apply a small amount of detergent to an inconspicuous area of the surface.If the appearance of the coating has not deteriorated after application, the treatment can be carried out over the entire area. But it is still better to buy special preparations that guarantee that their use is safe for acrylics, or delicate universal cleaning agents.

It is important to properly care for an acrylic bathtub to extend its life.

Nowadays, there are many tools with which you can clean an acrylic bath. Here is a list of the most effective developments from well-known manufacturers.

"Akrilan"

Its popularity is due to its speed of action and versatility: the drug helps to remove residual detergents, get rid of rust, mold, and salt deposits. "Akrylan" does not damage the surface of the bath - on the contrary, it becomes glossy due to the creation of a thin protective film.

"Ravak"

The line includes several products at once, each of which performs its own function: cleaning, disinfection, restoration of the protective layer.

"Acryl Polish"

The brand is represented by a line of drugs from the manufacturer Koipa. In addition to cleansing gels, it also includes bath repair and polish products.

"Tim Profi"

It is an environmentally friendly product without harmful ingredients. The drug gently disinfects the surface, removes odors, removes salt deposits, greasy stains.

Cif

An all-purpose spray or cream suitable for all types of coatings and plumbing. Due to the absence of abrasives, Sif is safe for acrylic surfaces. With its help, you can wash the bath from yellowness, rusty streaks, fat, lime.

"Cinderella"

An effective spray that requires you to wear a respirator due to its characteristic pungent odor.

"Chister"

A universal cleaner suitable for baths and other plumbing fixtures. Gently cleans acrylic from grease and rust stains, soap traces. The formula of the preparation contains a polymer that prevents the growth of fungus and the adhesion of dirt.

Popular cleaners for acrylic bathtubs

Having solved the problem of choosing a cleaning agent, all that remains is to clean the bathtub. Usually, the instructions can be found directly on the packaging.

The general rules for using household chemicals at home are as follows:

liquids are applied with a sponge, left for some time (from 5 to 20 minutes) on the surface, washed off with water under pressure;
spray spray, maintain the specified time, wash off;
wipe a clean bath with a dry cloth.

Related article: How to clean the seams between bathroom tiles.

An overview of effective specialized cleaning products

Among a wide range of household chemicals, you should choose the right product:

Domestos. Gel for cleaning dirty surfaces in the bathroom and toilet

Due to the high acid content, use with caution on acrylic surfaces. Well removes black spots on chrome parts (faucet, shower head)

Eliminates blockages of any complexity, you need to pour the product into the flush and use a plunger.
Sanelite. The oxygen gel is suitable for cleaning all types of surfaces. It removes limescale and rust, has an antibacterial effect, which prevents the formation of mold.
Mr.Muscle. The active spray is easy to apply and highly effective. Helps with any contamination on plumbing from various materials, including plastic items. Gives shine.
Cinderella. Liquid for cleaning acrylic surfaces, forms a protective film that prevents the formation of new dirty spots.
Cif. The detergent in the form of a cream gently removes gray deposits and rusty marks. Suitable for cleaning tiles and tiles. Washes off easily and does not leave streaks.
Ecover, Binatec, Green Pin. Products based on probiotics, based only on natural ingredients without aggressive substances. Special bacteria destroy organic residues. Provides cleanliness, shine and additional disinfection.On contact, they do not cause allergic reactions.

To clean the whirlpool jets in the jacuzzi, draw up water and add a suitable product for the material from which the sanitary ware is made. Then turn on the desired function for 20 minutes so that the resulting solution rinses the holes. After the cleaning procedure, you need to drain the dirty water, re-draw and drain again to completely rinse out the chemical residues.

A properly selected component for washing after each use of a hygiene item will allow you to avoid heavy contamination, which can be removed using various methods, using folk remedies or household chemicals, spending a little time and effort.

The article has been verified by the editorial staff.

Common technical issues

A whirlpool bath is a complex technical system equipped with an impressive set of functional facilities.

They are responsible for starting and stopping equipment, stimulating the movement of water, saturating it with air, forming a pressure and also performing a number of various significant actions. We talked in more detail about the device of a whirlpool bath in our other article.

The technical equipment of the jacuzzi needs preventive examinations and periodic troubleshooting, some of which can be corrected by hand

Signs of a serious breakdown, which can easily be repaired or mature, include:

Failure or delayed on / off. Technical systems with braking respond when buttons are pressed and do not start or shut down. If you find such deviations in the work, it is advisable to call a master specializing in the repair of jacuzzi equipment.
Knocking out traffic jams. You should definitely call an electrician for the probable laying and connection of a separate branch of the electrical network for the spa bath.
Obstructed water flow. A purely plumbing nuisance - a blockage, which, if you know the design of the jacuzzi bowl, you can deal with it yourself.
Insufficient head. If the jets have ceased to produce a massage effect, it means that the nozzles are clogged. To eliminate the problem, carefully unscrew the cap and remove dirt and sediment from the inner surface with a soft cloth.
Poor quality water supply. Occurs due to clogging or failure of filters, which should be cleaned or replaced.

Like any plumbing fixture, the whirlpool tub is prone to all breakdowns that occur due to the failure of the faucets or just the cartridges. Their repair and replacement are carried out according to the standard scheme.

Without knowledge and experience in the field of repairing compressor and pumping equipment, it is not worth taking on troubleshooting. It is better to contact a specialized workshop.

For more information about various breakdowns in a hydromassage bath and methods for eliminating them, we recommend looking at our other article.

1 Criteria for choosing a spa bath

First of all, you should decide on the form. Corner bath saves space in the room. At the same time, there is enough space in this container for underwater massage. In addition, the corner bathtub fits better into almost any bathroom decor.

The material for this equipment is usually acrylic. It has less heat capacity than metal, so it heats up faster. True, the water in the acrylic container cools down just as quickly. An important property of acrylic is that this material is very plastic, so it is possible to produce acrylic bathtubs of various shapes and sizes.

An important point in choosing a bath is the type and number of massage jets. Experts believe that the number of nozzles for a normal massage procedure should be in the range of 6-10 pieces. This is quite enough to provide massage to all parts of the body, and a larger amount will reduce the effectiveness of the massage, since the force of water pressure on each nozzle decreases.An important point is the convenience of the location of the massage system control panel.

Double hot tub

The whirlpool tub must have a non-slip coating. This will allow you to get the most out of your stay in such a hydromassage device.

Important! Carry out all finishing work before installing the appliance.

Removal of other types of contamination

The combination of citric acid and hydrogen peroxide will help remove traces of potassium permanganate.

These substances strongly stain any surface. To remove traces of potassium permanganate, use a combination of citric acid (or fresh lemon juice) and hydrogen peroxide.

Brilliant green solution is cleaned from surfaces with alcohol. However, this option is ineffective in cases where an acrylic bowl is installed.

Citric acid helps to get rid of the effects of dust. The dirt is removed with water, then the walls of the bowl are treated. The paint is removed with solvents, but first you need to do a test to check how such a substance will affect the bath coating.

Most of the silicone is removed first. Residues are cleaned off with salt-based products. Given that an abrasive is used, this option is not suitable for all types of plumbing fixtures. Special products of the chemical industry are more effective.

Methods for removing sealant in the bathroom.

The best option is soda ash. This substance penetrates deep into the coating, fills microcracks, due to which the walls of the bowl brighten. You can use a method using baking soda, soda ash and bleach with vinegar.

Care for bowls made of different materials

The choice of the cleaning method and the use of disinfectants for treatment largely depends on the material from which the spa bowl is made.

The main requirement that should be unquestioningly observed when using hydromassage plumbing: if you take a bath - wash it

If you do not rinse the bath immediately after taking water procedures, next time it will be unpleasant to sit in a bowl with dried deposits and dirty walls.

Bathtubs with acrylic bowls occupy a leading position in the popularity rating. They are comfortable, lightweight and withstand mechanical stress perfectly. But inorganic rubber polymer is very sensitive to all kinds of damage.

Therefore, when caring for an acrylic surface, it is unacceptable to use metal brushes and other hard materials that leave microscratches on it, which gradually turn into microcracks under the influence of water.

Detergents containing organic solvents, formaldehyde and aggressive acids are contraindicated for acrylic baths

Detergents containing acetone and other types of solvents are also not suitable for the care of acrylic. It is not permissible to use abrasive cleaning agents. They damage and thin coatings.

To keep the surface of the acrylic bathtub clean and tidy, it is enough to rinse the tank with water and wipe it with a moisture-absorbent cloth each time after completing water procedures.

If scratches do appear on the acrylic surface, you can remedy the situation by using liquid acrylic. It is applied to the place of damage and polished with a polish until, until the surface acquires a uniform state with the rest of the coating.

To remove scratches, you can also use special pencils like "FixltPro" and polishing pastes. But it should be borne in mind that these funds are effective only on fresh scratches.

For more useful information on the best products for the care of acrylic sanitary ware, we recommend looking here.

The enamel coating of steel and cast iron baths can be used for cleaning compounds based on abrasive substances. But such cleaning can have a detrimental effect on the condition of the injectors.

The only exceptions are those models in which the nozzle valves are closed, which excludes clogging of the holes during cleaning.

Manufacturers recommend the use of foams and gels that will not corrode the coating and harm the equipment.

If you carelessly handle the plumbing, scratches and chips can form on the enamel coating. In addition to the fact that they spoil the appearance, they are also a threat to plumbing in general. In a humid environment, bacteria colonies can form inside cracks.

You can eliminate the defect by restoring the enamel on the damaged area. Modern enamel compositions plus the use of a pouring technique make it possible to restore coatings only at the site of damage.

In case of extensive chips, the surface is repaired by filling first with a coarse-dispersion and then with a fine-dispersion putty. Only after this is the polished area covered with enamel and polished.

Enamel paint or aerosol is applied in 2-3 layers only on a thoroughly degreased surface, maintaining an interval between them until the composition is completely solidified

After the completion of the procedure, the bath coating takes on its original appearance.

Does your bathtub have multiple chips and scratches? We recommend that you familiarize yourself with the methods of restoring a cast iron bath.