How to clean a pipe in a bath - all about the bath

Preparation

Samovars are mainly made from the following materials:

brass;
copper;
stainless steel;
cupronickel;
nickel;
aluminum;
faience.

> Expensive samovar models are available with chrome or gold plating. When choosing a cleaning agent, it is important to consider the material of manufacture. This is explained by the fact that metals give different reactions with different chemicals.

How long has it been made?

The choice of purifier depends on the date of manufacture of the kitchen appliance. If the copper samovar was created a long time ago, then it is recommended to remove the plaque from such a product from the inside: the patina covering the outer walls gives the effect of antiquity. In addition, older appliances require more aggressive cleaning agents that can penetrate deeply into the material.

Manufacturing material

As mentioned above, samovars are made from different materials, each of which has its own requirements, both for care and for cleaning agents.

Disassembly

Complete disassembly will be required if there is a need to restore individual components of the samovar. For cleaning, you need to remove the top cover to gain access to the inner walls, as well as the key, handles, crown and stand.

Different types of blockage in the chimney of a bath

Not everyone thinks about what consequences, apart from a violation of draft, blockages of the bath chimney can lead. Meanwhile, one tenth of fires occur for this reason. Cleaning the oven is only a small part of all prevention. And the chimney clogs up much more often than the owners think.

There are several reasons for the blockage of the sauna chimney, the most common are:

Soot and soot.
Condensate.
Various foreign objects.

Each of them causes trouble and requires different cleaning methods.

Soot and soot in the pipe

Soot and soot accumulate inside the structure in a thick layer, in a year it can reach 1–2 cm. Such overgrowth depends on what kind of fuel is used for kindling. So, if the stove is fired with wood, wood briquettes, coal, then soot will be minimal. But in the sauna stove, not only firewood is burned, but also household waste, which emit a large amount of soot. Coniferous firewood also behaves; resin, when burned, forms soot in large quantities.

There are special briquettes on sale with chemicals that destroy soot when burned. They are simply kindled in the stove and after 1–2 days the dirt itself will fall into the firebox. From there it will not be difficult to clean it. But it is not recommended to use such products in the bathhouse, as the chemicals get into the premises and can negatively affect the health of the bathers.

To clean the bath pipe from soot, it is easier to use a special brush, a brush. They are suspended on a weight and lowered into a pipe. Craftsmen suggest using cut plastic bottles and other devices as cleaning. But you can use these if the pipe has a perfectly flat and smooth inner surface.

Condensate in the pipe

The resin in the wood contains a certain acidity. The resin content is different for each type of wood. With the constant use of the bath, the condensate in the pipes has a small resinous sediment, but with a rare one it can reach a thickness of 3 cm.

It can be difficult to remove such contaminants, because of the increased oiliness, the resinous condensate will simply be smeared along the inner surface during cleaning.

Such a blockage can only be cleared with a special "chimney sweep log".

It must be used once a month for prophylaxis, especially if firewood with a high resin content (pine, spruce) is used. If a birch is used for kindling, then every 2-3 months.

Foreign objects in the pipe

The ingress of a foreign object into the chimney is noticeable immediately. The smoke stops pulling out and goes back to the bathhouse. With such a firebox, you can easily get poisoned by carbon monoxide. A foreign object can be a brick from a pipe masonry, a nest of birds that has been blown down by the wind from the branches of a nearby growing tree.

Getting rid of such a blockage is the most difficult thing. You can try using a long pole or stick to push the object inward. At the end of the stick, a hook is made from a nail, so you can try to hook on an object if it is not a brick.

Telescopic brushes are commercially available, the handle extends to the full length of the pipe. You can try to push the object to her. If none of the methods worked, the pipe will have to be dismantled.

What is soot? This is "byaka"

Before learning how to clean a pipe in a bath, you need to remember what that evil is, with which you have to fight, why soot accumulates, how it threatens bath lovers.

Sauna stoves are usually heated with wood. During their combustion, oxidative reactions take place. If conditions are ideal, the carbon in the wood is converted to carbon dioxide - CO₂... When oxygen is absent, or there is a great lack of oxygen, carbon monoxide - CO is produced instead of carbon dioxide. He, taking with him particles of unburned fuel, rises up the chimney, the latter in the process of movement have a bad habit of sticking to the walls of the chimney.

The most serious emergency that can be expected by the owners is the ignition of soot. If the temperature of its ignition is "only" 253 °, then the process itself raises it to 1100-1200 °. The burning of this black plaque is comparable to a flash or even an explosion. Fireclay bricks are able to survive such a serious catastrophe, metal chimneys are not designed for such operating conditions at all. Neither the adhered to fire safety rules nor thermal insulation will save them: the metal will burn out, and the fire will spread to the furniture and the inner lining of the bath.

Cleaning methods

There are a number of effective methods to help clean the pipe from soot and dirt. The most popular ones are:

Mechanical is the most effective method used when the chimney is heavily soiled. This method is suitable for any chimney. It is simple and does not take a lot of time. You just need to pick up or make your own nylon bristle brush. it must be selected according to the dimensions of the pipe. Choose a flexible brush handle - to make it easier to clean the chimney of various shapes.
Chemical - when choosing this method, special cleaners are used. Such formulations contain special substances that actively remove soot. You can purchase a cleaner in powder or liquid form. It is necessary to pour or pour a chemical cleaner into the melted firebox, which, when burned, will begin to release active components. The soot will become more pliable. Part of it will fly out with the smoke, and some will fall down. It is absolutely safe to clean the chimney with chemicals, since there are no toxins in such formulations. There is also a serious drawback of the method - in the absence of wind, dirt from the pipe will settle on the site.
Calcining the pipe. This method is the most dangerous. To clean the chimney, aspen firewood is loaded into the firebox, which is then well kindled. Fuel is thrown up until a strong fire appears that can warm up the chimney. The oven will hum. The dampers must be opened to maximize the air supply. The high temperature will burn the soot, which will clean the chimney.

If the pipe is damaged, the latter method is unacceptable - a fire may occur

It is important to regularly check the integrity of the chimney

Additional folk cleaning methods

If the above cleaning methods did not help, then you can resort to other means.

Coca Cola

Coca-Cola or other carbonated drink helps to remove plaque from the inside.The effectiveness of this method is due to the presence of soda in such products. The drink must be poured into a samovar and boiled for cleaning for half an hour, and then brush the walls with a toothbrush.

Potato peelings

To descale you need to boil water in a samovar with potato peelings and leave this mixture for 2-3 hours. Then the composition is drained, and the inner walls are wiped with a washcloth with soda.

Share link:

How to clean a pipe in a bath - what means and methods exist

In the process of burning wood, carbon monoxide and smoke are released from it. White smoke is formed when water evaporates in wood fibers, but black smoke is the result of the formation of coal, soot and creosote. This black smoke, carrying particles of combustion products, gradually settles on the walls of the chimney, and the thickness of the plaque depends on the surface structure.

Thus, the clearance in the chimney pipe becomes less and less, the draft deteriorates. And all the settled particles can either ruin the chimney, or re-ignite, leading to a fire.

If you notice the following signs, then do not delay the process of cleaning the chimney:

kindling a bath requires more consumables. than before;
the chimney emits thick black smoke;
the flame in the firebox changes shades from bright orange to blue.

Timely and regular chimney cleaning will reduce your time, costs and get rid of the sad consequences.

With good traction, the soot will fly into the face, so wear a respirator before starting the cleaning procedure.

If the chimney is very long and rises strongly above the roof surface, you can tidy it up by climbing from below. In this case, use a flexible hose or stiff wire brush. Most modern sauna stoves have a cleaning glass or a specialized hole through which all the necessary manipulations are performed. If this moment was not provided for during the construction of the bath, you will have to work through the firebox or partially disassemble the stove.

Go through the metal pipe inside not only with a brush, but with a lump of rags, otherwise a significant part of the plaque will remain in place. Take old rags and wrap them around the tool. Double cleaning will be more effective and will help you achieve the desired effect faster.

Heating a sauna stove with wood or coal gives a lot of heat, but a side effect of fuel combustion will always be the formation of soot and soot. They quickly form a sediment on the inner surface of the chimney pipe, reducing its clearance. Leaving it in this form is not only impractical, but also dangerous.

In addition to poor draft in the chimney, a large amount of ash is fraught with fire and fire. To avoid a dangerous situation, it is necessary to regularly inspect the chimney pipe, and, as soot accumulates, clean it using available methods.

When using firewood from coniferous trees, which give an acidic sludge, the formation of plaque on the pipe is even faster.

Folk remedies in the fight against soot

There are several other home remedies that have proven effective in chimney cleaning over the years. One such method is potato peeling. To do this, melt the stove well and put half a bucket of potato peelings on hot coals. During combustion, they produce a lot of starch, which removes soot and carbon deposits on the walls of the chimney. But do not rely only on folk methods, since traditional pipe cleaning is the most effective way.

Aspen firewood is considered another folk remedy. They need to be put in the oven and set on fire. The combustion of this fuel must be maintained for several hours in order for all the soot and soot to burn out. But in order to use this method, your oven must withstand temperatures above 1100 degrees.

Prophylaxis

It is not difficult to clean the chimney on your own.But it is easier to carry out preventive measures that exclude the possibility of the formation and accumulation of soot and soot in the pipes. For these purposes, one of the old-fashioned methods is suitable.

All that is required for prophylaxis is to burn aluminum foil or a can together with fuel every 10 furnaces. The main condition for preventive action is a hot fire. Aluminum should really burn, and not lie on the wood and gradually change color.

Preventive measures do not exclude the need for cleaning. They only make it possible to reduce the frequency of cleaning the chimney from soot and soot. Without prophylaxis, cleaning should be performed 2 times a year, with prophylaxis once every 2-3 years, provided that high-quality fuel is used.

Clean the chimney in a timely manner and remove soot from the wells (if any in the design of the stove), and then you can quickly warm up the bath and relax in the steam room.

You need to understand that cleaning requires the chimney of any stove, even a modern one. This applies to both solid fuel stoves and structures that have a combustion chamber in their structure, but operate on other types of fuel.

Chimney cleaning is best done during relatively warm seasons, such as mid-spring and autumn.

This approach will eliminate the likelihood of injury due to a slippery roof.

If the circumstances are such that the pipe is completely clogged and there is no draft, then cleaning measures should be carried out immediately, because you risk being left not only without visiting the steam room, but without a bath at all. A blocked chimney is one of the common causes of fires.

Methods for removing soot from the inner surfaces of the bath

The soot escaping from the stove settles everywhere inside the steam room - on the walls, ceiling, brickwork and metal parts of the stove, on the window glass. Each of the materials stained with soot requires its own means with which it is more convenient to clean it.

The most difficult thing to wash off the soot in the bathhouse is on wooden walls and ceilings. You cannot simply remove it with soapy water. Soot dissolves poorly and simply spreads over the surface. Wood is a hygroscopic material, and soot particles penetrate inside together with water, penetrating into small pores and cracks. It will be impossible to wipe them off after that. You will have to remove the top layer of the wood covering along with the ingrained soot.

Mechanical method

You can clean soot from bricks and wood with a stiff brush.

To remove black deposits on the walls and ceiling effectively and without the risk of entering the pores of the wood, you need to scrape them off. This is time consuming and tedious, as it requires considerable physical effort even when working on flat surfaces.

Soot must be removed from joints and crevices using sharp objects or special brushes. In addition, such actions lead to damage to the upper layers of the tree with which the steam room is sheathed. The result is clean walls without any soot residue.

Chemical method

The use of detergents to remove soot saves time and effort. But when choosing chemicals, you need to be careful.

The composition of soot is based on carbon, and it practically does not dissolve in anything. Using strong chemicals with acids will destroy the structure of the tree. To remove soot, alkali-based washing compounds are used. They remove carbon deposits, but do not harm the wood flooring.

Preliminary preparation

Remove soot and soot with protective clothing.

Before proceeding with cleaning the bath in any way, it is necessary to take measures to prevent the spread of the removed soot particles:

Go over all contaminated surfaces with a vacuum cleaner.
Cover the floor and shelves with plastic or paper.
Wear protective clothing, rubber gloves on your hands, and a mask on your face.
Brush off the top layer of soot with a broom or a hard-bristled brush.

Only after these actions can you start the main removal of contaminants.

Reasons for clogging the chimney in the bath

Pipe clogging can occur for various reasons. The accumulation of soot described above on the inner surface of the chimney pipe is an inevitable process, because the combustion products of the fuel in the form of particles settle on a metal or brick surface by themselves.

Accelerates the process of plaque formation by condensation from water vapor, which is formed from moisture in the wood fibers.

When using firewood from coniferous trees, which give an acidic sludge, the formation of plaque on the pipe is even faster.

Other causes of chimney clogging are a mechanical obstruction that closes the chimney lumen. It can be a nest or a bird accidentally caught in the chimney, a tree branch, a piece of roofing material and other objects.

Folk remedies

There are other effective ways to eliminate soot in a sauna stove pipe. They were developed many decades ago:

Potato peelings. Half a bucket of peelings from potatoes are thrown into the firebox. They contain a lot of starch, which can quickly decompose soot. The impurities in the pipe collapse after 2-3 days. After applying this method, it is necessary to clean the pipe with a brush.
Aluminum cans. They are burned in a firebox when the heat is at its maximum. For this method, coal should be added to the kiln. When the fire flares up, aluminum cans should be thrown into the firebox. Make sure they are burnt out. One can completely burns out in 5 minutes.
Watering hose. A brush should be put on it. After a few strokes of the hose through the pipe, the soot will be removed.

Such methods allow you to prevent the consequences of contamination of the stove chimney in the bath and prevent unpleasant consequences. Preventive cleaning is a must. It is not recommended to throw plastic items into the firebox. It is better not to use raw firewood for kindling a bath.

Mechanical cleaning methods

Chemicals are not always effective when cleaning a chimney in a bath or kitchen.

All kinds of debris can get into the pipe, which will prevent the formation of traction and interfere with the combustion of special chemicals.

In this case, mechanical cleaning of the smoke duct from the stove is recommended. Before you clean the chimney mechanically, you need to acquire special tools.

In addition, in some cases, you may need a special core with a cable attached to it, with which you can break through fairly dense blockages.

All these tools for cleaning smoke channels can be purchased in the store or made yourself.

It is best to start cleaning the chimney from the top of the chimney, gradually going down. Carry out cleaning through the equipped cleaning doors.

The last thing to do is to clean the firebox itself and the ash pan adjacent to it.

Before starting all work on cleaning the chimney on the roof of the house, the ladder is well fixed. You should also open all the dampers and vice versa, tightly close the openings of the firebox and ash pan.

In addition, the head is pre-dismantled from the chimney. All work must be carried out in a respirator.

It is a cable, at one end of which there is a handle for rotation, and at the other end - a special nozzle, the diameter of which should slightly exceed the diameter of the pipe itself.

The cable is moved along the smoke channel by rotating the handle as accurately as possible.

If the movement of the ruff stalls, then it has stumbled upon a dense blockage, which will have to be pierced with the help of a kernel.

It should be lowered into the pipe with sharp movements, without touching its walls, otherwise the brickwork can be broken. After removing the blockage, continue cleaning with a flexible brush.

After the pipe is completely cleaned, it is necessary to remove the soot through special cleaning doors.

Video:

In most cases, several such doors are equipped along the entire length of the smoke channel.

To begin with, they clean the channel from soot that has fallen from above, after which, using a scraper and a ruff, they clean its walls, gradually moving downward, where the firebox is located.

At the final stage, the ash pan and firebox should be thoroughly cleaned. To do this, you can use a vacuum cleaner, which is previously recommended to be equipped with a disposable paper garbage bag.

At the end of the work, the stove should be kindled and the presence and quality of draft should be checked. If everything went well, then a previously removed head is mounted on the top of the pipe.

Foreign object

The most difficult pollution is the presence of a foreign body in the chimney, for example, a fallen brick or a fallen bird's nest. Taking up a fairly large space, such an object prevents smoke from escaping. You can get rid of it with the help of the same kettlebell on a rope or usually a pole, which is not difficult to push through the debris from above. But if the thing has been in the bowels of the chimney for a long time, then this method is unlikely to help.

The most effective tool would be a brush that has an extension handle with the ability to lengthen as it penetrates deeper into the pipe by adding new sections. But if this did not help, in the case, for example, when the socket is on the side, then you will have to disassemble the pipe and remove the "obstacle" with your hands.

Advice from the master!

If you burn charcoal, dry wood or fuel briquettes, then there will be practically no soot.

But we often throw everything into the firebox in the bathhouse - household waste, garbage, and even plastic and polyethylene. In this case, the chimney becomes soiled very quickly. Thus, thinking about what you throw into the stove, and trying not to clog it with unnecessary trash, you will make it easier for yourself to clean the pipes, and you will do it much less often.

How to make a stove for a bath from a pipe? Sparks from the sauna pipe Correct installation of the sauna stove and its chimney: safety first! When is a Russian sauna heater needed to be repaired?

Chimney cleaning methods

There are various ways to clean the pipe. Which one is suitable depends on the characteristics of the stove heating in the bath, the material and the length of the chimney.

Mechanical

The easiest way to clean the chimney is to mechanically remove blockages and soot deposits. acting on the principle of a brush.

First, it is necessary to assess the degree of clogging and narrowing of the chimney lumen. You can use a flashlight, flexible cable with a video camera.

If there is a physical obstacle in the pipe - a nest, a remnant of slate - it is necessary to push it through with a long stick or pole

Usually, to clean the chimney with the help of human physical strength, special brushes are used, which are sold in stores. They scrape and sweep away the resulting soot layer. Thanks to the flexible handle, this brush can be used to thoroughly clean the pipe.

Another option for mechanical cleaning of the chimney is to hang the brush on a special cable with a load. The weighting creates the necessary tension, so that the brush or ruff comes into contact with the surface of the chimney pipe and scrapes off the soot.

Some people use a simple watering hose to clean the chimney, which is inserted into the pipe and made translational movements. At the same time, the soot is knocked off the surface of the walls and falls into the furnace, from where it is then collected and disposed of.

Mechanical cleaning methods include the use of special equipment operating on the principle of a vacuum cleaner. For example, these can be special installations that are inserted into the outer opening of the chimney on the roof.

The appliance creates a strong draft that sucks out the soot like a vacuum cleaner. The disadvantage of this method is that there is no container or bag for collecting the soot, and the soot and soot to be removed are simply blown out of the pipe into the air. At the same time, the roof and the adjacent territory are polluted.Although this method is quite effective, it usually causes strong resentment among neighbors.

Another similar method is the "Tornado" set, which consists of six-meter interconnected handles and a nylon brush. The handles are connected in series so that the resulting structure matches the length of the chimney. A brush is attached to its outer end, and the other end is attached to a drill.

The fast rotation of the brush due to the torque of the drill allows you to effectively clean the chimney pipe. To protect against soot, a special film is attached to the firebox, which is sold with the kit.

Chemical

Chemically active substances can be used to remove soot from the chimney, provided that there are no mechanical blockages in the chimney, and the thickness of the plaque does not exceed 2 cm.

Means in the form of powders, briquettes, fluids for chemical cleaning of the chimney are burned together with fuel. During combustion, they release gases that chemically react with soot on the surface of the pipe, which crumbles downward.

Chemicals, if used correctly, are safe for humans and furnace equipment.

The most famous among them:

PKH - anti-carbonaceous chemical composition;
"Kominichek";
"Log chimney sweep";
"Smoke";
Vortex;
"Sazhinet".

Folk ways

Traditional methods of chimney cleaning are based on the chemical and thermodynamic properties of various materials.

One of the simplest, most affordable and popular folk methods is burning potato peelings in a furnace. In the process of burning, they release starch, which, together with the smoke, settles on the surface of the pipe and enters into a chemical reaction with soot. After a few days, it crumbles completely, leaving the chimney clean.

Another method is burning aspen logs, which, when burning, create an extremely high temperature, due to which the soot itself burns out.

The last method that can be attributed to the folk is the burning of simple table salt in a firebox. The salt makes the soot layer on the pipe surface soft, but does not completely remove it. This is rather a combined method based on chemical and mechanical cleaning of the pipe (after burning the salt, you need to wait until the pipe cools down and clean the chimney with a brush).

Recommendations

The above methods will help get rid of existing problems. It will not be possible to completely eliminate the appearance of soot on the walls of the flue. But you can reduce its volume and slow down the deposition by following a few simple guidelines.

Garbage must not be burned in the oven. Foreign objects can contain refractory substances that will condense on the walls and lead to rapid blockage of the pipe.
Only dry wood should be used for ignition. High-quality, well-dried fuel produces a minimum amount of soot. In addition, the combustion temperature of such a tree will be higher, which has a positive effect on the ongoing processes. Raw wood burns much worse, and in the process, soot, steam, tar and tar are released. These substances easily settle on the colder pipe walls and lead to a deterioration in conductivity. The use of raw wood is considered the most common cause of rapid soot build-up.
Professional stove-makers recommend using hardwoods. For example, oak, hornbeam, beech, aspen or acacia. Walnut, cherry, apple or poplar are good alternatives. And conifers should be discarded. They contain a large amount of resinous substances. When burned, they create a sticky substance on the walls to which soot easily adheres. In addition, the resin is very difficult to clean up once it has dried.
It is necessary to monitor the temperature. The optimal temperature range is considered to be 150-350 degrees. Low temperatures can cause incomplete combustion and release additional soot into the atmosphere.
It is recommended to prepare firewood a couple of days before lighting the stove and put it to dry.
To light the stove, use wood chips and cardboard, and only then place the logs.
With a high combustion intensity, soot is not emitted, which means that it is not deposited on the walls. However, this prevents the heat from preheating the oven. The heat just goes into the atmosphere. It is necessary to find the right balance and regulate the combustion with the blower. You can greatly simplify the process by installing a burning indicator on the wall.

A clogged chimney will not be a problem if you know how to clean a pipe in a bath from soot with your own hands. Using one of the proposed methods, you can reduce the fire hazard, improve cravings and make your sauna even more enjoyable. But there is no better cleaning than prevention. Do not forget about the implementation of simple recommendations, and the issue of soot and condensation deposition will not arise.

Cleaning a metal chimney

Chemical and folk remedies are good in preventing blockages. But to cope with real carbon deposits can only be done manually. The same is the case with the cleaning of metal chimneys. The cleaning technology is exactly the same as when working with brick pipes.

Round metal chimneys are used for gas boilers. When choosing cleaning agents, it is better to take a round ruff, which will be 20% larger than the pipe size. But the main feature is that the metal chimney is made of stainless steel. Therefore, you need to use a plastic brush for cleaning.

Now on the market you can find various devices for mechanical cleaning of chimneys. Therefore, the question is only about money: are you ready to spend money on a purchased set, or do you still make the device with your own hands.

When and how often to clean the chimney

The main signs that indicate that it is time to clean the chimney:

Poor draft from the stove during the heating;
Black smoke from the chimney;
Flakes of soot fly from the chimney;
Smoke enters the room;
You have to open the lower flap more so that the wood burns;
Arbitrary flame attenuation;
An unpleasant smell appeared during the furnace.

Black smoke is one of the signs that you need to clean your chimney.

If the layer of plaque is thick enough, sparks can ignite during the heating. This can destroy the flue gas system.

If the design is of a simple type, then you can clean the chimney yourself. Work should be carried out from the inside and outside of the building.

The chimney is cleaned regularly every six months. However, the procedure can be carried out earlier if there are characteristic signs of clogging.

How to clean the chimney pipe in the bath from soot with folk remedies

Some of the "time-tested" methods are quite specific, while others are completely useless, so traditional technologies should be used with caution. We have selected those that really work and have a scientific basis: In the old days, our great-great-grandfathers poured salt into the fire

You can repeat their experience, but before doing so, heat the firebox properly. Do this so that the soot flies up and does not crumble inward. Throw a pound of salt into the fire. If you did everything correctly, black flakes will fly into the air. Starch has a similar effect.

In the old days, our great-great-grandfathers poured salt into the fire. You can repeat their experience, but before doing so, heat the firebox properly. Do this so that the soot flies up and does not crumble inward. Throw a pound of salt into the fire. If you did everything correctly, black flakes will fly into the air. Starch has a similar effect.

When using potato peels, the cinders fall down. But, despite the fact that the method requires subsequent cleaning of the room, it works successfully, and after the procedure, no soot remains. Put a bucket of potato skins or chopped potatoes into a well-heated oven and wait for the result.

Experienced chimney sweeps advise putting several aluminum cans on the fire.For this method, firewood with a high heat capacity is needed, because the empty container must exactly burn out. If it just turned black, do not expect the desired effect. One can burns out in 7 - 9 minutes.

Now you know how to heat the stove in order to clean the chimney, and how to remove the soot yourself, but if the blockage is very strong, we strongly advise you to invite a specialist. Professional cleaning will return the bath to functionality without fires and other unforeseen circumstances. In addition, the wizard will tell you how to properly care for the heating system in the future.

Horizontal section

Methods for cleaning straight chimneys are more or less clear, as the only difficulty is finding the right cleaning tools. It is much more difficult with winding chimneys, especially those with a lot of horizontal sections.

Attention! According to the rules of SNiP, the total length of the horizontal sections of the chimney pipe should not exceed one meter.

Cleaning of such structures should be taken care of even at the manufacturing stage:

Install special metal doors right next to the horizontal sections;
Equip the removed bricks if the chimney is brick.

This way, you always have access to even the most difficult areas.