How is cleaning vacuum cleaner?

Reasons and need for cleaning

Why is it necessary to make efforts for the cleanliness of heating devices? Like any objects in a living room, radiators become contaminated, not only from the outside, but also from the inside. Dust accumulates on the surface of the devices, which can negatively affect the well-being of residents. In addition to dust, such devices often have greasy contamination, which is difficult to remove.

> Thoroughly flush heating batteries if:

• the battery heats up unevenly - one part differs in temperature from another, even to the touch;
• the warm-up time of the apartment has increased compared to previous seasons;
• radiators are colder than the thermal main;
• for residents of private houses, a characteristic sign of the need for flushing is the fact of an increase in energy resources for heating, provided that heat transfer is reduced or maintained at the same level.

Contamination of heating batteries occurs due to changes in the quality of the liquid. This fact contributes to the settling of mechanical particles moving together with the coolant. After the end of the season, the water is drained, and corrosion often begins to develop inside the pipe. When the heating season resumes, under the pressure of hot water, corrosive particles begin to move and settle in the radiator. Over time, there is more and more debris, which can lead to blockages and poor performance. Thus, the lack of cleaning can lead to a decrease in the heat dissipation of the batteries while maintaining the same costs.

Eliminate unpleasant odor

If we are not talking about the smell of burning plastic, the equipment does not burn, then its reason is not a violation of functionality. First of all, it is advisable to replace the collection bag. During a series of cleanings, dust, hair, microbes accumulate in it. Warm air escapes from the vacuum cleaner through these impurities, creating an unpleasant odor.

If replacing the bag does not remove the odor, clean or replace the filters. If they are clogged, dust can enter the engine, settle on its anchor, which also creates an odor. Before purchasing replacement filters, determine which one you need - inlet or outlet (one of them is thinner, the other is denser).

In some older devices, the smell does not disappear with cleaning. In this case, the following advice will help. Buy fragrances designed to be used directly in vacuum cleaners. In addition to neutralizing odors, some aromas are even beneficial for the human body, playing the role of aromatherapy.

Everything that gets into the vacuum cleaner remains there.

By default, it is considered that it is enough for a vacuum cleaner to collect dust, and it will remain inside exactly until you decide to change the bag or empty out the container. Alas, in many vacuum cleaners, part of the dust that has got inside is returned back to the room - this is one of the main problems that developers are trying to solve with the help of filtration.

Only HEPA outlet filters are able to keep almost all dust inside the vacuum cleaner

Vacuum cleaner ads literally scream that the new filters trap 99.99% of all dust. It sounds attractive, but only HEPA output filters and only HEPA-14 class are capable of retaining this amount of debris. Their efficiency is 99.995%. But for filters of classes 10-13 this figure is 85% and higher, that is, they let a certain amount of dust and allergens outside. By the way, grades 10-13 have recently been classified as EPA, that is, they have ceased to be called highly effective.

In addition, even HEPA-14 will not be able to perfectly cope with the task if the pre-motor and main filters are faulty.

In models of vacuum cleaners where the HEPA filter is not provided at all, the situation with throwing dust back into the air is very sad.

Features of the care of inflatable models

A popular seasonal version of the pool in the country is inflatable models. They have a simple design and are easy to install and remove. It is enough just to look after them. Care includes regular cleansing of the internal surfaces from mucus collecting on them, disinfection of water.Cleaning the water should be done a couple of times during the week by injecting cleansers directly into the water.

If the pool capacity is large, it is important to completely change the water twice during the swimming season.

Children's pool models require a weekly water change, in toddlers' pools it is recommended to change the water daily. An empty pool must be rinsed with cleaning and disinfectants, the walls must be thoroughly cleaned with brushes or cloths. After that, the entire pool must be rinsed with running water, and only after that it can be refilled with fresh water.

You can maintain the pool yourself, it is important not to run its condition until it is heavily soiled. When caring for an inflatable pool, the owner himself chooses the methods and means of disinfection and treatment

Why do you need to clean

Cleaning the reservoir is easy, it is carried out independently or with the assistance of specialists. The water in it should be clear, without the slightest pollution. This guarantees safety for bathers and decorates the courtyard area. Therefore, it is recommended to purify the water every 2-3 days.

Turbid water

Wind-blown dust cloud water when bathers do not wash before entering the pool. Turbidity of the water also occurs after the rest of large companies. This is corrected by replacing the water, the obligatory use of filters at the water inlet to the bowl. If the water becomes cloudy from the appearance of algae, chemicals are first applied, then the algae is removed mechanically.

Bloom

Water blooms if algae seeds from the nearest natural reservoirs - rivers, lakes, get into it with the wind. Blooming algae particles are removed from the surface of the water by fine-mesh nets. Some owners first use chemicals to kill the algae, and only then remove the sediment manually or using a water vacuum cleaner. However, the use of chemistry is harmful to humans. The brushes of the water vacuum cleaner remove algae from the walls of the container. Microscopic algae are fought with ultraviolet light, ozonation, for which there are special installations.

Basic chemicals:

• Albucid;
• Perhydrol;
• Algicide.

Manufacturers of chemical products for cleaning swimming pools offer different products based on them.

The appearance of rust

The accumulation of rust occurs if the water in the area is hard, with metal impurities. In order to protect the water from the appearance of traces of rust, special filters against hard water must be installed at the entrance to the bowl. Two-stage filters are often installed - the first is a coarse filter, the second is a fine filter. If rust appears, it is removed with brushes from the walls of the container, sucked from the corners and from the bottom with a special vacuum cleaner.

Il

Silting is akin to flowering, it is important to remove silt from the walls of the pool, collect it from the bottom with a vacuum cleaner. The work is done carefully so that silt particles do not remain in the water

Otherwise, their growth and water pollution will continue. When it is not possible to get rid of sludge mechanically, it is recommended to drain the water, clean the bowl with chemical agents.

What are the filters

The filtration system is one of the main components, without which the operation of any vacuum cleaner is impossible, be it a robot, a washing machine or a conventional dry cleaning apparatus. Large and small debris settles in the primary filters, HEPA filters retain the smallest dust particles and protect the engine from contamination. When starting to clean the vacuum cleaner at home, it is the dust collectors that are washed or shaken out first. If this is not done in time, the suction power of the device will decrease and the quality of cleaning will decrease.

There are several types of filters, and each requires special care.

• A dust collector in the form of a cloth or paper bag is the most common and common type of filter. It can be disposable or reusable.In the first case, we are talking about paper bags, which, when filled, require replacement. The cloth bag can be used as a filter as many times as you like. When filling the cloth dust container, the debris is shaken out, and the cloth is washed with detergent.

The water filter is a plastic container filled with water. The sucked-in dust gets into the liquid, gets wet and settles on the bottom of the container. To clean the filter, you need to pour out the dirty water and rinse the plastic container under the tap.
In a vacuum cleaner with a cyclone filter, polluted air passes through a special container in which dust and debris are compacted and settled. To clean such a filter, simply shake it out and rinse the grooves and recesses in the structure with clean water, and then dry it. The manufacturer recommends doing this work after each cleaning.
Nera filters are designed to retain microparticles up to 0.3 microns in size. They protect the engine from dust and clean the air discharged by the vacuum cleaner into the room. These items also require cleaning. Disposable HEPA uses paper or fiberglass. They cannot be washed, but they can be shaken out or vacuumed. If the fine filter has been used for a long time and is heavily soiled, it is better to replace it.

Reusable HEPA is made from PTFE and is washable. For cleaning, the filter together with the cassette is soaked in warm soapy water for several minutes, after which it is washed with running water and dried well.

Types of filters used in modern models:

• synthetic or paper bag - can be disposable (thrown away after each cleaning) or reusable (can be washed);
• cyclonic - is a system of a large container for collecting dust, large particles of debris and several plates, sponges designed for filtration;
• modern highly efficient fine filters (HEPA), which purify the air from pollution, allergens by almost 100% - such filters are used both in cyclonic and simple models, can be disposable and reusable;
• aquafilters (water) - during cleaning, dust is moistened with water and collects at the bottom of the container.

Types of bags

There are two types of products used in bag vacuum cleaners: disposable and reusable.

Disposable dust bags are made of thick paper or thin synthetic material that disintegrates when in contact with water. The dust-filled disposable bag is sealed and sent to the trash bin, and a new one takes its place.

Reusable bag with proper care used for several years - until the fabric breaks or the fastener breaks. After cleaning, the cloth dust container is shaken out. However, there comes a time when the matter is completely clogged with dirt and dry cleaning no longer gives positive results. In this case, the bag can be washed, although the manufacturers do not recommend this.

According to the type of material, reusable bags are divided into the following groups:

• cotton - have seams into which garbage is hammered;
• synthetic - easily cleaned by knocking out, erased without problems, since they have no seams, but do not tolerate brushing;
• from non-woven fabric - the most advanced products with special protective impregnation, used in expensive modern models.

The type of dust collector determines how quickly it gets dirty and how it will have to be cleaned. Dry cleaning is recommended when 2/3 full, washing is usually carried out after 5-6 knockouts.

Effective ways to clean upholstered furniture

Upholstered upholstered furniture is the worst affected by dirt. This is especially true for light fleecy fabrics. But if you regularly devote time to cleaning, then it can keep its appearance unchanged for up to 10-12 years, even with constant use.

Soap solution

Rub 1 teaspoon of soap and mix until dissolved with a liter of water. A napkin is dipped into the resulting solution and wiped in the direction of the pile. You cannot use a lot of water.

Salt mixture

A teaspoon of salt is mixed with a liter of water. A waffle towel is moistened in the mixture and applied to the place of contamination.

Foams and powders for car interiors

The best way for routine cleaning is with universal powders and foams for the interior of the car. It will not take long to wash the chair with them, but, alas, stains that are complex in structure cannot be removed.

Folk methods

For stains of a certain nature, it is better to choose either a chemical agent or use folk methods. Naturally, the latter will come out significantly cheaper.

Juice and wine stains

It is removed with a soda solution. If the stain is ingrained, then make a mixture of vinegar and ammonia in equal proportions. A rag is wetted in it and applied to the contamination for 3 minutes. You can try the salt method. Its essence is to sprinkle a pile of salt on the stain, wait 10 minutes, and then remove with a damp cloth. Remember, a fresh stain is easier to remove, so don't delay cleaning.

Coffee Tea

Laundry soap is used. A teaspoon is mixed with water, the composition is applied to the surface for 1 minute and removed with a cloth.

Chewing gum

Removed by wiping with acetone. If frozen, then freeze the pieces of ice in the freezer. They attach themselves to the gum and literally rip it off the surface.

Fat

Remove grease stains with salt. The place is sprinkled, they wait 10 minutes, clean with a napkin. The method is not always effective - the fresher the stain, the more likely it is to remove it.

A soapy solution made from laundry soap will do. They also take the usual special means for cleaning the car interior.

Urine

Remove urine stains with a vinegar solution. 1 tablespoon of 9 percent is mixed with a liter of water, applied to the places of contamination with a napkin. Cleaned with a damp cloth.

Lipstick

Wakes up with salt, leaves on for 5 minutes. The trail is soaked in soapy water, washed clean and dried. Ordinary ammonia is also effective.

Blood

When it occurs, the area is quickly wetted with cold water. If the stain is dry, then the area is moistened with ice cubes, washed with a weak vinegar solution.

Detergents

Before starting wet cleaning, you need to clean the carpet from coarse debris and dirt. To do this, you can use a conventional vacuum cleaner with a vibrating brush attachment. Such attachments well clean the carpet pile from the smallest particles and sand. After that, you need to choose the right cleaning agent that is ideal for cleaning your particular carpet. Quite often, with the wrong choice of cleaning shampoo, the carpet loses its original appearance and fades. This problem can be avoided by using a more gentle chlorine-free carpet cleaner.

Just like a carpet cleaner, the detergent also plays a big role. Typically, these detergents come with the main unit. However, you can pick them up separately. Speaking about which brands are the most effective and reliable, it is recommended to make a choice in favor of detergents from the company:

1. "Organiks"
2. Green & Wedge.
3. "Wags".
4. "Vanish".

It is these manufacturers of vacuum cleaner detergents that have won the most positive reviews.

Before you start washing the carpet, you need to make sure whether this or that product can be wet cleaned, because if the carpet was made on the basis of natural handmade materials, for example, viscose, wool or silk, then such products are best taken to special dry cleaners.

Rules for choosing a detergent

The modern market offers hundreds of options for products that remove both single types of dirt and universal ones.Choosing from them, take into account the requirements:

• the detergent must be completely hypoallergenic - in any case, some of the composition will remain on the chair, if it causes allergic reactions, then the household is in danger;
• cleaning should take place with a minimum amount of water - upholstered furniture does not like soaking, it is problematic to take out the chair every time, outside the chair, so you need to choose a product that requires the minimum amount of moisture;
• the composition should have a pleasant smell - it will remain in the room and on the upholstery, at least the smell should be neutral;
• the composition is selected with the mildest effect - it will be unpleasant to find that parts of the chair have faded, the upholstery has lost its color or is completely leaky.

A folk (made from improvised household substances), household (bought in a store in the household chemicals department) or technical (vacuum cleaners and steam cleaners) means must be checked. Select an inconspicuous area of ​​the chair and clean in accordance with the instructions.

Rules for performing work for winter conservation

Each owner of a hydraulic structure has to deal with the issue of preparing the pool for winter.

There are well-tried and tested rules:

1. Drain the water.
2. Clean metal parts, cover them with a disinfectant solution.
3. Clean the walls and bottom with special chemicals using brushes or using a vacuum cleaner.
4. Dismantle the lighting system, wrap the removed equipment with a cloth and store in a dry, warm room.
5. Remove the pumping equipment from frost, before cleaning and rinsing the filters.
6. Disinfect all pool material.
7. Provide protection against salt buildup. Pools left for wintering with conservation water freeze. Because of this, the water is filled with disinfectants and chemicals to prevent salt formation.
8. Install a compensation system to prevent the destruction of the pool cover by the pressure of the water freezing in it. The role of expansion joints can be played by pieces of foam, empty plastic bottles, old car tires.
9. Remove the hydraulic system, completely all technological equipment. Close empty pipes with special plugs. Protect the valves with waterproof plastic bags.
10. Cover the tank so that sunlight and debris do not enter the bowl. For this, tarpaulins, wooden boards, polycarbonate sheets are used.

Correct preservation of the hydraulic structure will effectively protect the pool from winter destruction, preserve its functionality for the next years without the need for repair.

Share link:

Features of cleaning various materials

The choice of means for washing baking sheets should be taking into account the characteristics of the material used for the manufacture of kitchen utensils. Abrasives can destroy Teflon coatings and scratch glass.

Glass

Fireproof glass sheets are excellent dishwasher cleaning. But if the appliance is not on the farm, then you can wash the glass baking sheet using:

• soaking in water with dishwashing liquid;
• rubbing with gruel from a baking powder for dough;
• heating water on a sheet in the oven.

After applying any method, the carbon layer will easily come off the glass surface.

Ceramics

For clay surfaces, use soft, delicate products. Soaking with soap or baking soda is also fine. The carbon is easily wiped off with a gruel of dry mustard, which is applied to the contaminated areas.

Enamel

The enamel finish is gentle and capricious. After damage, rust will begin to appear on the utensils and destroy the dishes. It is necessary to rinse the sheets immediately after cooking on them. You can fight the remaining fat and oil with wine and apple cider vinegar. The container is poured with acid and left for a while, until the dirt becomes soft, it easily goes away.

Lemon juice and apple peels soften hardened grease and oil stains. Slight dirt is wiped with a slice of lemon. You can also use baking soda, wiping the dirty areas with gruel.

Silicone

Silicone molds stained with grease are soaked in warm water, adding dishwashing detergent. You can also use baking soda to clean your silicone product. At the end, rinse the sheets and wipe with a dry towel.

Teflon

Modern coatings prevent food from sticking to the surface of the leaf. But it is necessary to wash off the layers of fat immediately after cooking, otherwise its layers will spoil the appearance of the utensils. Rinse the Teflon sheets with warm or hot water and dishwashing gel.

Aluminum

Fatty substances from aluminum utensils can be removed with hot water, soap and ammonia. Blackening on the walls is removed with a swab dipped in a solution of vinegar and water, taken in equal amounts. Stains from burnt food are cleaned with half an apple.

Mercury removal

It may happen that you collect the mercury (eg from a broken thermometer) with a vacuum cleaner. What to do? Throw away the device, of course, you might think. But such drastic measures are not necessary.

First check whether a collection of a hazardous substance has actually taken place.

Expert opinion
Evgeniya Taran

The required measurements will be quickly carried out by demercurization specialists. When mercury vapors are detected, the vacuum cleaner is treated with chemical neutralizing substances. The cost of calling specialists at home is low, affordable for almost everyone.

> Measurements can be carried out by yourself using special test strips. Before using them, read the instructions, follow the recommendations. You can also purchase a kit for the measurement and neutralization of hazardous vapors from mercury, designed for safe use in residential areas that does not require special training. The substances used are not toxic, do not disturb the surface of the device. The use of protective equipment is not necessary.

How to wash a vacuum cleaner bag?

To wash a bag from a vacuum cleaner, while maintaining its appearance and functionality, you need to know some features of the process and take into account the manufacturer's recommendations.

The work is carried out in several stages:

1. 5–6 liters of water are collected in the basin, the temperature of which is not higher than + 30 ° С. Washing in hot water can shrink the fabric and deform the garment.
2. Dilute with some detergent. If it is a powder, then it must be diluted so that the water is almost transparent. Do the same with laundry soap.
3. The filter, cleared of dust, is placed in water and, without much effort, squeezed by hand. The bag can now be left to soak for 50-60 minutes.
4. The product is rinsed several times in cool water, and then laid out on the wire rack above the bathtub.
5. After the excess moisture drains, the filter must be blotted with a towel and hung out to dry. Heating radiators, heaters, hair dryers and other electrical appliances must not be used for drying.

As soon as the dust container is completely dry, it is installed in the vacuum cleaner - and you can start cleaning again.

Proper and regular maintenance of your vacuum cleaner will extend its life. After cleaning, the filters should be checked and, if necessary, washed and dried. The full disposable dust container should be discarded and the cloth bag can be washed, dried and reused.

Preparatory stage

Before you start cleaning the vacuum cleaner at home, you need to stock up on rubber gloves, an apron to protect your clothes from dirt, a bucket of warm water and detergent. You will also need a microfiber or flannel napkin and a hard sponge. In order not to dilute the dirt on the floor, you can use oilcloth or thick film 100x100 cm in size.

After all the necessary accessories have been prepared, you can start disassembling the vacuum cleaner, which looks like this:

1. with dry hands, the unit is disconnected from the power supply and allowed to cool down after work;
2. then the vacuum cleaner is placed on an oilcloth pre-laid on the floor, the cord is wiped with a damp cloth and wound up;
3. then open the housing mounts, remove the filter and start cleaning it.

Types of filters and their cleaning

Modern household vacuum cleaners are equipped with filters of several types, differing from each other not only in the principle of operation and design, but also in the method of cleaning.

Aquafilter. Such a filter is a reservoir of water that passes a stream of dust particles through itself and settles them on its inner surfaces. Vacuum cleaners equipped with such filters are able not only to effectively retain dirt and debris, but also to clean the air returned to the room and slightly humidify it. Cleaning the water filter is as follows: a container with dirty water is removed from the case and the dirty water is drained into the sewer, then the container is washed with warm water using a detergent, after which it is wiped with a dry flannel and dried.

We clean the nozzles and the hose

After the filters have been cleaned, proceed with the cleaning of the suction hose and the working brush, adhering to the following steps:

• the hose is disconnected from the vacuum cleaner and placed in a bathtub filled with warm water for 10 minutes;
• then, using a long wire, the pipe is cleaned from the inside and washed with a hard sponge from the outside;
• then dry well and set in place;
• when cleaning the brush, it is necessary to remove large accumulations of dust and hair with scissors, pull them out with tweezers or an old toothbrush;
• if the working brush is equipped with the "floor / carpet" modes, then the bristles should be pulled out and cleaned from dirt;
• then it is placed in a basin with soapy water and left for 10-15 minutes, after which it is washed well with a hard sponge, rinsed and placed to dry.

We blow out the motor

The vacuum cleaner's motor is also frequently contaminated and needs to be cleaned regularly. To do this, remove all filters from the unit, take it out to the balcony and turn it on by setting the power switch to the maximum value

In this case, it is recommended to tilt the unit in different directions and gently shake it.After a few minutes, the device is turned off, the motor is allowed to cool down and wiped on top with a damp cloth

Removing the smell

Sometimes, if the frequency is violated in cleaning the dust collector, an unpleasant smell begins to emanate from the vacuum cleaner. More often than others, aggregates with fabric bags suffer from this, which, when moisture gets on them, begin to smell terribly. Models with an aquafilter are also susceptible to odor, which is caused by the stagnation of dirty water if it is not removed in time. The cyclone samples are a little better, and devices with paper bags do not smell at all, which is due to the frequent replacement of bags, because of which the smell does not have time to accumulate and spread.

HEPA filters are also prone to the accumulation of unpleasant odors and must be cleaned or replaced regularly. A special aroma for vacuum cleaners also copes well with smell. It consists of small odorous balls that are sucked in by the device and kept in the dust collector until it is emptied.

If you don't have a fragrance at hand, you can use the following recipe:

mix 1/2 cup of wine vinegar with the same amount of warm water;
wipe the previously disassembled vacuum cleaner from the inside with the resulting solution, while special attention should be paid to hard-to-reach areas and the place of attachment of the dust collector;
when all the parts are processed, the unit is allowed to dry, a cotton pad is moistened with a few drops of essential oil, placed in a dust collector and the vacuum cleaner is collected.

What are the advantages of a washing vacuum cleaner?

Of course, this is wet cleaning of almost all types of surfaces.

The only exceptions are natural carpets and parquet flooring, however, even those can be cleaned with a washing vacuum cleaner if certain precautions are taken. In general, the gadget is designed for high-quality cleaning of any floor covering, as well as furniture, windows and car interiors.

In addition, the vacuum cleaner automatically deodorizes the room, and also copes well with collecting spilled liquid during small household floods.

Dry cleaning with a vacuum cleaner of this type does not differ from using a similar model of a "dry" vacuum cleaner. With the help of such a device, you can clean any floor covering, carpets, furniture, as well as pillows, blankets, winter clothes and other products made of dense fabrics.

Special attention should be paid to washing vacuum cleaners with an aquafilter and a separator:

• The working set of such a model includes a special electric beating brush, which allows deep cleaning of the surface, as well as cleaning in the most inaccessible places.
• Another feature of dry cleaning with a vacuum cleaner of a separator type is the ability to polish the parquet using a nozzle developed for this purpose.
• During operation, the vacuum cleaner automatically cleans and ionizes the air in the room.

In addition, the separator type vacuum cleaner does not require additional consumables, and is also easy to maintain and operate.

As for the disadvantages of using washing vacuum cleaners for dry cleaning of the hookah type, that is, without a separator, first of all, it is necessary to note the large weight and solid dimensions of the structure. Agree, getting a 10-kilogram unit out of the cabinet to remove the crumbs spilled from the table is not the most convenient and practical solution.

In addition, the infamous HEPA filters are also part of the design of conventional washing vacuums. In the advertising accompanying the device, filters of this type are presented as the most effective, retaining up to 99.95% of all contaminants with a diameter of 0.3 microns. However, it is not customary to inform gullible buyers that the remaining part of the dust not only passes through the barrier of porous material, but also crushes, becoming almost elusive. But it is the reactive cloud of pathogenic microparticles that fluttering behind a working vacuum cleaner that creates the main danger to the user's health. At the same time, the HEPA filter is an excellent breeding ground for all kinds of bacteria, which, when the unit is turned on, disperse in a powerful stream throughout the room. And finally, any filter of this type has the unpleasant property of clogging up during operation, which significantly reduces the suction power of the unit.

Of the less significant disadvantages of a washing vacuum cleaner, one can single out the high cost of the device, as well as the need for regular maintenance.

Features of care for various materials

Cleaning features depend on the material, and not only on the type of pollution.

Teflon coating

Teflon-coated chairs are not uncommon these days. Such furniture is highly practical. You can wash it using any cleaning agent, even kitchen detergents. But it is still worth remembering that if Teflon is bright, then the color may change due to the effect of a strong product with abrasive particles. Better to choose options with safe and soft ingredients.

Leather

Dirt can be easily removed from an armchair made of genuine leather, as it does not absorb moisture. For cleaning, use an ordinary non-hard cloth soaked in soapy water. Chemicals are not allowed to be used, because they can damage the structure and make holes. The same is the case with steam generators.

Leatherette

Leatherette will also not tolerate the neglect of chemicals. As a last resort, folk components or made from environmentally friendly substances are used to remove contamination.

Flock

Flock, along with velor, are extremely capricious materials. They do not tolerate changes in villous structures and strong chemical influences. Therefore, it is forbidden to use hard brushes. It is better to choose a regular microfiber cloth or buy a medium-power steam cleaner

The surface of the dust is cleaned with a soft brush, while it is important to move only in the direction of the pile. If you do not follow this rule, then creases will occur, which will lead to the formation of empty areas on the fabric.

Shannil

The chenille chair will require special care

This fabric does not tolerate sudden movements, it should be handled with the utmost care, exclude hard brushes that can damage the structure. It is best to use a steam cleaner or vacuum cleaner for cleaning.

Microlux upholstery

Very practical upholstery that can be cleaned instantly. Both technical means and ordinary rags soaked in solution are suitable. The main thing is to let the upholstery dry, otherwise it will forever absorb the foreign smell of the chemical.

Microfiber

Upholstery that creates comfort and is very pleasant to the body. Alas, the chairs with it serve less than the others. The fact is that this fabric is highly susceptible to dust and dirt, stains from blood, wine or a ballpoint pen will be very difficult to remove. The way out is to regularly engage in routine cleaning.

Natural silk

Extraordinary upholstery, thanks to which the chair becomes a real work of art. It is rather difficult to clean it, since it is not allowed to be exposed to strong steam, ammonia, vinegar, as well as almost all chemicals (with the exception of those products that are specially created for silk fabrics). Only cleaning at a very slow rate with a steam generator or vacuum cleaner is suitable.

Textile

This is a relatively cheap option, making the chair easy and convenient to clean. It is allowed to use both chemical agents and folk methods. The main thing is to prevent color fading. Therefore, it is better to try beforehand on the inconspicuous side, whether the chosen cleaning method is suitable.

Jacquard

It is allowed to use steam generators, but at the minimum mode

It is important to clean with a non-hard brush, but not aggressively.

Velours

A capricious material that will not tolerate changes in the direction of the pile. Also, you can not use chemicals and vinegar. A microfiber cloth, steam generator is used. You should only move in the direction of the pile.

Splender

A comfortable material that has been actively used to create furniture only in the last few years. It is allowed to clean it by any methods, but carefully monitor the color.

Nubuck, suede

Cleaning is carried out using special brushes with soft rubber surfaces. You can find these in a furniture store.