How to clean fur and fur coat at home: 20 chemical and folk remedies

Rules for removing various stains from fur and lining

It often happens that a thrifty mistress manages to preserve the appearance of her fur coat, but the lining of the product is worn out and looks unattractive. Restoration of fabric can be carried out in the following way: rip off the lining material and wash it in a washing machine at temperatures up to 40 degrees for silk and polyester.

If there is a concern that it will not be possible to sew the lining in place with high quality and neatness, there is another way. This requires:

make a soapy solution / dilute shampoo in water;
with a sponge, carefully so as not to wet the flesh - the back side of the animal's skin, treat the dirt on the hem with foam;
wash off the foam with a clean damp cloth, avoiding the formation of streaks;
dry the lining at room temperature.

To prevent dirt on the underside of the lining, sew another layer of fabric onto this part. It should be steamed and washed.

Sometimes it is necessary to remove stains from vomit, fatty or sweet foods, blood from a fur coat. The first step is to wipe off the dirt with a damp towel without wetting the skin of the animal. It is not worth tightening with stains, old dirt is more difficult to remove. Next, the fur should dry on a coat hanger at room temperature away from heat sources.

After that, talcum powder or semolina should be applied to the affected area of the fur coat and rubbed into the pile in a circular motion for several minutes. The substances, due to their abrasive properties, will collect the remains of vomit and blood, eliminate the unpleasant odor. The undercoat is cleaned with a brush and the product is ventilated.

After removing vomit from the fur with a damp towel, ammonia and vinegar are used to completely clean the product as described above. The foam from the hair shampoo will cope with the unpleasant odor, for this, the fur is carefully treated with a sponge.

Stains on fur clothing can be of a different nature and origin. For example, natural suede bags willingly give color to fur if worn on the shoulder. You can get dirty with the sauce when you eat on the run, or put a blot on with a clerical pen.

You can remove a stain from dark fur with gasoline (the white will turn yellow). Refined gasoline with a high octane number. Sometimes it is applied neat, but more often it is mixed with starch or washing powder without enzymes to the consistency of sour cream. A couple of minutes after application, the mixture must be removed with a sponge dipped in clean water, and the product must be dried and combed.

Stains from light fur can be removed with acetone or alcohol, as well as mixing liquids with starch or baking soda.

The stronger the dye and the older the stain, the more difficult it is to deal with it at home. If these methods do not work, do not experiment: take the fur coat to a dry cleaner.

How to refresh mink fur with specialized products

Most of the fresh dirt on a mink coat can be removed with household products. But special chemicals are also useful, they are easy to find in hardware stores:

Salamander Professional Fur Fresh. The aerosol is specially designed for the care of natural fur products; when sprayed over a mink coat, it will not harm the pile, but will return the original color and shine.
Insaf. Another spray is intended for preventive care of fur and for removing all types of stains. The product is sprayed over a mink coat according to the instructions, and then the product is combed and dried. The aerosol not only removes dirt, but also protects the fur from moths and prevents it from falling off.
Furasol Cleaner is intended for complex care and shows itself especially well when used prophylactically. The spray helps to keep the mink coat silky and shiny and also removes minor grime.

Specialized products are advised to be used mainly for regular care of fur products. Aerosols do a good job of tarnishing the pile and slight yellowing, but with heavy dirt they may not have an effect.

Rules for cleaning and storing products

When cleaning mink fur, there is a high risk of being careless or not taking into account the characteristics of the substances used. Actions that are undesirable during the care of an expensive product:

Washing is strictly prohibited. Under the influence of detergents and water, it will lose its shape, the skin will become rough and dry.
Do not use a hair dryer with a wet cleaning method.
Under no circumstances should the iron be involved in the drying process. The product will retain its natural shape if you use regular hangers.
It is necessary to clean a mink fur coat only when necessary. From too frequent procedures, fur shedding can begin.

So that before each winter season there is no problem of how and how to clean a mink coat at home, you need to follow several rules. They are quite simple:

you cannot store a fur coat in a plastic bag so that the pile does not become electrified and an oxygen deficiency does not form;
before long-term storage of products, it is recommended to treat cabinets with special means that will protect the fur coat from pests;
you can stuff the sleeves with newsprint: the moth does not like the smell of printing ink;
before storing a mink coat, the room needs to be ventilated, and a bag of incense should be put in the closet;
it is impossible to spray the mink fur with perfume so that there are no stubborn stains;
the habit of carrying the bag on the shoulder or on the arm should be abandoned: this is a sure way to wipe the fur.

For today, this is all that I wanted to say about how to clean a mink coat at home. And if you follow simple rules, provide proper care for the fur coat, then this expensive and beautiful thing will serve for a long time. It is advisable to monitor the condition of the mink coat in the summer.

Vinegar

When you look at the cotton wool, you will understand that it was not in vain that you chose this method of cleaning. The cotton pad will darken with dirt and must be replaced with a new one. The replacement must be carried out until you completely clean your fur coat, hat or collar.

Natural bristles are not afraid of vinegar, but if you need to soften it, use diluted glycerin. From this, it will begin to shine even more, and will be protected for some time with a thin film. After wet cleaning, it is advisable to comb the fur and allow the product to dry completely. Only then put it in a cover and send it to the closet.

Note that it is very important to regularly wear a warm fur coat. The more often you go out into the cold in it, the longer and better it will last.

But in wet weather, you need to put on a jacket, and take care of fur things. If you accidentally get into a fur coat in the rain, then hang it on a hanger, comb it and leave to dry. Place it near heaters and in rooms that are too hot no way case is not possible.

A source

How to clean a white mink from yellowness

Household chemicals that have a whitening effect are suitable for whitening at home. These include hydrogen peroxide, lemon, bite. If it is not possible to lighten the thing with folk methods, it is recommended to clean it with special means.

When cleaning with liquid products, it is necessary to ensure that the used liquids do not get on the flesh. Otherwise, it will deform, go in waves, and when it dries, it will become brittle and tough.

Vinegar and lemon juice

To avoid damaging the furs, it is recommended to clean with 9 or 6% vinegar solution.

Concentrated citric acid can turn white wool yellow, so it is best to clean with freshly squeezed lemon juice without pulp and pits.

How to apply:

Mix equal proportions of vinegar and lemon juice.
Pour into a spray bottle, shake.
Spray on yellow spots and spread the liquid over the surface with a soft brush.
Shake and hang to dry on a hanger.
Comb the white coat with a fine-toothed comb.

Salt and ammonia

The mixture will whiten, refresh and clean white items.

How to clean:

Add a tablespoon of salt to 500 ml of water, stir until completely dissolved.
Pour in a tablespoon of ammonia.
Pour the solution into a spray bottle and apply to the dirty surface.
Wipe with a soft cloth or brush.
Shake and hang to dry.

Peroxide and ammonia

A mixture of two bleaching liquids can clean even old fur from yellowness.

Substances should be used with care so as not to "burn" the product. How to clean:

Pour a teaspoon of hydrogen peroxide into a glass of water.
Add a couple of drops of ammonia.
Stir and dampen a cotton ball or soft cloth in the solution.
Wipe the surface gently and leave to dry.

Magic snow

The liquid is specially formulated to remove yellowness from white mink. Manufactured in Germany. It is expensive: you will have to pay 2 thousand rubles for 100 ml.

How to clean white fur:

Dilute one part of the bleaching liquid with 4 parts of water.
Pour into a spray bottle, shake.
Spray on yellow areas.
Hang up to dry, shake occasionally and brush the mink.

To tint an old mink coat, it is recommended to use a tinting paint in the form of a Furasol spray. For mink, white or light gray is suitable.

How to bring back a fresh look and shine to fur

Dilute the juice of fresh lemon or table vinegar with warm water in a 1: 1 ratio. Apply the solution with a sponge or cotton pad to the product. Do not urinate the fur strongly: a sponge or cotton pad must be squeezed out well in order to wipe the product, and not wash it locally. Wait until the fur is completely dry and comb with a soft brush.
Short fur can be wiped with almonds or walnuts: thanks to the natural oils in the composition, the fur will quickly smooth out and regain the lost shine.
For items with long hair, use a spray bottle with warm water, a tablespoon of lemon bite and a drop of any vegetable oil or glycerin. Spray the solution from a long distance to prevent the fur from sticking together. Dry and comb gently afterwards.

If a fur coat made of natural fur or its collar has lost its gloss, shine, stopped shimmering, then you can return their former presentable appearance with the help of some home remedies.

Such substances are effective:

Lemon juice, glycerin solution. Both ingredients, or separately, are applied with a sponge to the fur. Then remove with a dry napkin.
Acetic or alcoholic solutions in equal proportions with water.
Composition of 1 liter of hot water, 100 g of fish oil (or pork) and 10 g of soap. After cooling the composition to room temperature, add 10-12 drops of ammonia. The mixture is applied to the fur without rinsing.
An excellent result of the restoration of shine is obtained by the method of processing the product already described above with gasoline combined with starch.
Walnut. The kernels are crushed and placed in a gauze bag, which is carried along the pile of the fur coat. The fur starts to shine again.

Features of cleaning various fur

The fur of various fur-bearing animals requires certain conditions.

Salt for cleaning fur clothes

Taking into account these features, the following recommendations can be proposed:

How to clean mink fur at home? Cleaning can be done dry or wet. The dry technology is based on the use of talc, which is carefully rubbed into the dirt by hand. As a wet technology, the use of a mixture of vinegar and rubbing alcohol in equal proportions is popular.The composition is applied to the fur with a sponge and blotted with a dry cloth. If local contamination appears, clean gasoline can be used. The following composition is often recommended: table salt (60-70 g), ammonia (30 ml) and water (1 l).

Mink cleaning can be done dry or wet

When cleaning rabbit fur, a mixture of ammonia and hydrogen peroxide is often used according to the following calculation: peroxide - 1 tbsp. l., ammonia - 2-4 drops per 250 ml of water. Such a solution is applied to the fur for 15-20 hours, and it is advisable to provide drying in the sun. Another option is to sprinkle wheat bran on the fur heated to a temperature of 45-50 ° C.

Acetic acid is excellent for cleaning fur garments

How to clean chinchilla fur at home? Chinchilla fur, as well as raccoon and silver fox are dark fur varieties. In dry cleaning, you can use the following liquids: pure gasoline, a mixture of medical alcohol, vinegar essence and water (in equal proportions), a mixture of table salt and ammonia (based on salt - 4 tbsp. L., Ammonia - 1 tbsp. L. Per 1 liter of water Can be cleaned with a vinegar solution (8-9%).

Chinchilla fur belongs to dark fur varieties.

How to clean a sheepskin fur at home? The most popular use of a composition based on hydrogen peroxide. The solution is prepared by diluting 1 tbsp. l. peroxide in 1 liter of water. When cleaning, the top of the pile is moistened in such a way that the base will not be strongly exposed to the liquid. Another solution to the problem is a mixture of potato starch and aviation gasoline. This method is especially useful when cleaning fur-trimmed boots. The problem of how to clean the fur of astrakhan fur at home is solved in a similar way.

Detergent for cleaning various furs

When cleaning the fur of a polar fox, the following compositions are used: pure gasoline, shampoo for dogs, detergent for wool and silk. So, a mixture is widely used: ammonia and a detergent for wool (1 tablespoon of each ingredient) for 1 liter of water in a warm state. The luster of the fur is restored by treating it with a vinegar solution. If there is yellowness on such fur, the treatment is carried out with a solution of hydrogen peroxide.

How do I wash the lining?

Fur does not tolerate rough handling, so remember the rules that cannot be broken if you do not want to ruin the product completely.

It is strictly forbidden to wash natural fur products entirely at home, of natural or artificial origin. Wash artificial fur in a delicate machine wash without spinning.
Fur should not be dried at high temperatures: only outdoors or in a well-ventilated area.
The fur must not be ironed.
Fur is sensitive to household chemicals and harsh products, so you shouldn't experiment with bleaching products.

But before you start washing or dry cleaning the product, determine the type of problem.

Natural fur coats are not recommended to be washed. This procedure will not only ruin the pile, but also the leathery base of the fur, drying out, will shrink in a couple of sizes, which will lead to sagging of the lining, deformation of the clothes as a whole.

Is it worth the risk and spoil an expensive thing? Some manufacturers allow their faux fur products to be washed.

Particular attention should be paid to the meaning of the pictograms on the tag and to remember a few rules:

wash in slightly warmed water (temperature up to thirty-five degrees);
do not use ordinary washing powders;
do not wring out;
do not hang dry.

If the contamination is extensive and home cleaning methods are powerless, dry cleaning can be a panacea. It should be borne in mind that the services of this organization cost a lot, and not everyone gives a guarantee of a good result.

Trusting your fluffy treasure is only worthwhile to trusted firms with a good reputation, having previously discussed all the nuances of the procedure, be sure to document the provision of the service with documents.

You can clean the lining of a fur coat using one of the options:

without separating the lining from the fur coat, turn the product inside out and clean up individual areas - used if the problem area is small;
rip off the lining, wash, dry, iron with an iron and sew again - used for heavy dirt.

When cleaning the lining directly on the clothes, dissolve the shampoo in warm water, apply the solution to problem areas with a sponge, rub, pulling the lining back so as not to wet the base of the fur coat. Blot wet areas with a dry cloth, dry, leaving the fur coat turned inside out.

In another case, the lining is soaked in warm water with liquid washing powder for twenty minutes, after which it is washed by hand, rinsed well and air dried. Do not wash it in a typewriter, dry it on a battery - the fabric may shrink.

Stubborn stains on the lining can be removed with a dish soap or ammonia solution.

Cleaning the product at home

There are several methods for self-cleaning a mink. To choose the right and most suitable one, it is necessary to assess the nature of the pollution and know the type of fur.

Talc application

This product is well suited for removing dirt from light-colored minks. This white powder has good absorption properties and removes unpleasant odors. It is better to work with gloves. Pre-spread the fur coat on a flat surface, rub it with talcum powder. Rub it gently into the pile with your hands. Then shake the product from the rest of the powder, comb. This procedure cannot be carried out using flour or starch. Their remains on the fur coat at the first ingress of moisture will lead to swelling. Also flour and starch are an attractive environment for insects.

Sawdust

To freshen the fur, if it is a little dusty, you can use linden, oak, aspen sawdust (sold in pet stores). Pre-treat them with alcohol. You get a product that absorbs dirt well. Sprinkle sawdust on the fur coat. When they are dry, shake the fur coat and comb the fur.

Cleaning the lining

Unlike fur, greasy lining is not easy to clean. This can be done in several ways:

Unfasten the fabric, wash it according to the instructions for use so that it does not shrink. After drying, sew it back on.
The lining can be cleaned on the garment itself. Dip a brush in soapy water, run it over the fabric without touching the fur. For stubborn dirt, chlorine-free bleach can be used. Dry the lining with paper towels and leave the fur coat to dry on a hanger.

On a note! The lower part of the lining, which is often dirty with boots, colored trousers, can be trimmed with an additional strip of fabric. After contamination, it is simply stripped off and a new one is sewn on.

Soap solution

Dry cleaning does not always remove dirt from the mink. To get rid of a fresh stain, you can use a shampoo solution with water. Lather some shampoo in a bowl of warm water. Apply soapy lather with a cotton pad to the stain, rub gently. Remove the remaining foam with a soft sponge dipped in clean water. Dry the product naturally by hanging it on a hanger.

Ammonia

The product is good at removing greasy stains and perspiration from white mink. Dissolve a little ammonia in a glass of water, add a few drops of liquid soap. Soak a soft, light-colored cloth in the solution and clean the fur. You can clean the product in another way. In 200 ml of water dilute ½ teaspoon of ammonia and 20 g of salt. Moisten a white cloth with the product and apply to the stain. After a few minutes, clean the product by lightly pressing on the fur.

How to bring back the shine

The loss of shine by the mink occurs due to the washing away of fat from it. If such a problem arises, it is recommended to treat the fur coat with such a means: mix 100 g of fish oil with 10 g of liquid soap and 1 liter of boiling water.Add 10 drops of ammonia to the composition and cool to 36-37 degrees. Apply the composition to the fur with a brush or soft brush.

Removing odors

Mink absorbs various aromas well, which are not always pleasant. A vinyl cover for clothes will help to get rid of them, on the bottom of which you need to put ground coffee. Pack a fur coat in a cover and button it up. Whether the smell has disappeared or not can be checked every other day. So that the smell of coffee does not remain in the pile, it is necessary to leave the fur coat hanging for another day without a cover in a well-ventilated place.

Features of cleaning at home

The method depends on the type of fur, as it can be natural and artificial. The color of the fur coat is also taken into account: light or dark. Incorrectly selected cleaning agents damage the product.

Natural fur

The material is capricious, which a person should remember when starting cleaning.

Mink

The main concern of a person in this matter is how to keep a mink coat shiny. Fat is responsible for this, which is washed out over time. The problem is solved as follows. For 1 liter of boiling water, 10 g of liquid soap and 100 g of fish oil are taken.

Arctic fox

To clean the product, ammonia mixed with 500 ml of warm water and 1.5 tbsp. l. salt. The solution is moistened with cotton wool, which is used to process the product.

Rabbit

Fur coat care is as follows:

The pile is combed out with a soft comb.
Hydrogen peroxide is applied in the direction of the hairs.
Peroxide residues are removed with a soft cloth.

In the latter case, they act carefully so that the lining does not deteriorate.

Silver fox

Alcohol works well for this purpose. The surface of the product is treated with medical alcohol. First, they move against the pile, then in the direction of growth.

Raccoon

Mechanical combing is the best cleaning method to avoid damaging the fur. Cotton wool is put on a comb with metal teeth. The fur is moistened with water from a spray bottle and processed with a comb.

Mezdra

The leather base of a fur product coarsens over time. If this happens, special methods will help correct the situation. 1 egg yolk and 1 tsp dissolve in 1 liter of warm water. petroleum jelly. The latter is optionally replaced with glycerin.

The resulting mixture is applied to the seamy side of the fur. After that, the flesh is kneaded with smooth movements. As soon as the remnants of the product have been removed from the skin, the fur coat is sent to dry.

Cygeic

Starch and liquid detergent are mixed in equal parts. After receiving the slurry, the composition is applied to the fur. The gruel should be carefully rubbed into the fur, as this will improve the result. After the mass has dried, it is combed out with a brush.

Astrakhan

Starch, vinegar, ammonia and peroxide are suitable for cleaning the product.

Artificial

To clean the products, they boldly resort to using a washing machine. But the delicate mode is selected - 600 rpm and 40 degrees. Spin is excluded. Faux fur coats can be washed with gentle detergents.

White fur items

In the first case, potato starch or semolina is used. The dry mixture is applied to the surface of the product, and the person performs actions reminiscent of hand washing. After the substance is rubbed with dirty particles, the fur coat is shaken until the powder is completely removed.

Hydrogen peroxide is becoming an essential part of cleaning when it comes to white items. 1 tsp dissolves in 200 ml of warm water. peroxide. 5 drops of ammonia solution are added to the liquid, after which everything is mixed.

Using a sprayer, the solution is applied to the surface of the product. After the performed manipulations, the fur coat is taken out into the open air. It is desirable that she be in direct sunlight for at least 8 hours.

Methods for cleaning a mink coat

You can clean a yellowed mink coat at home using a dry and wet method, depending on where the pollution is located, what is its area, and what caused it to appear.The method of cleaning is determined by the color of the item: dry cleaning is suitable for all shades, wet cleaning of the product has its own peculiarities.

Dry cleaning is the treatment of fur with substances that act as a sorbent. They absorb dirt on the pile of the product. A lot of substances from the environment are deposited on the fur coat in the process of wearing: exhaust gases, dust, sulfur, soot, soot, the fur cakes, shines, has a greasy look. The undercoat sticks together, the product does not heat.

Wet cleaning is suitable for treating small-area dirt, lining. It is strictly forbidden to expose the entire fur coat to water, fur and leather will deteriorate from moisture.

Dry cleaning

Talc, baby powder, flour will help get rid of grease, soot on the coat. The fur coat is laid out on a horizontal surface, the fur is combed out with a special brush against the hair growth line, sprinkled with a loose substance and combed out again. After that, the remnants of the substance that has collected dirt from the pile are shaken off from the coat, and the coat is sent to the hangers.

Sawdust is a means of cleaning fur in an industrial environment. Only sawdust of deciduous trees is suitable - aspen, linden, oak. Place the fur coat horizontally, sprinkle with sawdust and comb out against the pile growth line with a brush. The sorbent will collect dirt, dust, soot, grease from the fur.

Soak the sawdust in refined gasoline or rubbing alcohol, sprinkle on a fur coat, and wait until they dry. After the thing needs to be combed and ventilated, the fur of the fur coat will shine like new.

Starch has a high absorption capacity for fats. The principle of operation is standard, sprinkle on the fur and comb through so that the dirt remains on the starch.

Semolina - an effective method to get rid of traces of wear on a fur coat - comb it with cereals, which will rid the pile of grease, dust, soot, traces of foundation and sweat on the collar. The fur coat is laid out horizontally, sprinkled with cereals and thoroughly combed. The remains of the semolina are shaken off.

Wet cleaning

The best way to clean a white mink coat is to treat the fur with hydrogen peroxide; for a dark one, you should choose another method of cleaning. Peroxide must be poured into a container with a spray bottle and sprayed on a fur coat hanging on a hanger. After the peroxide has dried, the coat must be brushed out. After cleaning with peroxide, the yellowness from the white fur will disappear.
Purified gasoline is used to remove local dirt and stains from a fur coat, in order to return the whiteness of the fur. To do this, 100 gr. liquid add 1 tbsp. spoon of starch and apply to dirt or yellowed area. After complete drying, the remnants of the cleaning agent are shaken off, and the fur is combed with a brush. White and fluffy are provided.
Special products that are sold in stores can easily cope with traces of mink wear. Spray or aerosol shake well, spray on the pile of the product. The fur coat should hang on a hanger. After processing, the fur is combed with a brush. The product can be selected depending on the color of the fur: for black and brown, for whites with a discoloration effect.
Table vinegar 5%, rubbing alcohol, vodka easily dissolve any contamination. To do this, table vinegar or alcohol is applied to a cotton pad and the contamination is treated. Dirt, grease, oil will remain on the disc, and the fur will shine. You can use an aqueous solution of ammonia, applying it with a cotton swab on the pile in a ratio of 1: 4, where one part of alcohol and 4 parts of water.
To clean a dirty mink fur coat, ordinary hair shampoo, which is diluted in water, will help to form a thick foam. Shampoo foam is rubbed into the fur with a sponge, wiped with a clean damp cloth. After drying, comb through. Mink has a short pile, combing it is allowed along the line of hair growth and against.

How to restore shine to fur

Sometimes there is no visible dirt on a dark fur coat, but its fur looks aged and has lost its luster. In this case, ordinary vinegar will help us. An aqueous solution of vinegar will restore the lost shine to the precious fur.You need to prepare a 5% vinegar solution, dip a cotton pad into it, squeeze out excess moisture from it. Wipe the pile with a damp (but not wet) cotton pad. If the fur is short, rub it against the pile, if long, in the direction of hair growth.

If you wear outerwear carefully, a mink coat can be used for up to two decades. During this time, the fur can become shiny and lose its volume. If your coat is made of light-colored mink, dry cleaning can be done. Talc, starch and semolina will serve as consumables.

Why are these bulk products not used to clean dark minks? It's very simple, they leave white streaks on dark fur coats. Talc will remove grease, dust from the fur of a white mink, and rid the fur of an unpleasant odor. Semolina has the same effect - with its help, a light mink can be easily cleaned of greasy stains, returning the fur to its natural shine. Starch can only be used as a last resort. It is a great consumable for getting rid of stains and returning natural color, but it does have one negative quality. It is not so easy to clean starch out of thick fur, and just imagine what will happen to your fur coat when it snows with rain or sleet outside. In problem areas where starch has been preserved, it may well form a hard-to-remove, sticky substance.

How to clean a white mink coat at home using semolina or talcum powder? Spread the fur product on the table; talcum powder or semolina is sprinkled on greasy spots, places of special pollution. Within one minute, absorbents are rubbed into the fur, with light movements, almost without spending any physical effort. Loose substances are shaken off from your favorite fur coat, their remains are removed with a special brush. If you have chosen talcum powder to remove stains from a fur coat, be sure to wear gloves, otherwise this substance will stick to your hands and you will stain the entire product, right down to its lining.

The semolina for cleaning a fur coat can be used in another capacity. To do this, boil porridge: take a tablespoon of semolina for one glass of milk. The porridge should be smooth, without any lumps. How to clean a white mink coat using semolina porridge? When the porridge has cooled down, apply it to the fur garment in a thin layer, spreading it evenly over all soiled areas. The fur coat should lie horizontally, it is best to place it on the table. Semolina porridge should be on the fur product for six hours, during which time it will dry. Gently remove any crumbs and use a wide-toothed comb to comb through the fur.