How to clean bronze at home quickly and effectively: 15 best remedies

Cleaning with natural remedies

Since ancient times, people have used improvised means in order to clean objects from bronze from oxidation. Many of these methods are easy to apply today to clean bronzes at home.

Chicory powder

Powdered chicory used in cooking can successfully remove patina. Apply it like this:

A tablespoon of chicory is diluted in warm water. Stir until the consistency of thick sour cream.
Apply the paste to the product, wipe off the stains with a soft brush. For small items or relief details, it is convenient to use an old toothbrush. The pressure should be soft.
Rinse the item with plenty of water and dry thoroughly with napkins.

Cinnamon powder

Peas

The popular leguminous plant perfectly cleans the bronze surface from dust, soot and other foreign contaminants. The sequence of actions is as follows:

Products that are going to be cleaned are placed in a container with several tablespoons of peas.
The container is filled with water so as to completely cover the bronze items.
The water is brought to a boil and boiled over low heat for 2-3 hours.
Items are transferred to another container and cooled.
The surface is wiped with a soft brush or cloth to remove the remaining dirt.

Dry the surface thoroughly.

Plaque reasons

The appearance of plaque on the metal coating is due to external factors. Exposure to the metal from the outside changes its state and reduces the protective characteristics.

Oxidation

When exposed to air, copper products begin to darken and become covered with green stains. Defects are the result of metal oxidation.

Skin exposure

Copper jewelry changes its original shade due to constant close contact with the skin. The secreted sweat contains elements that cause the oxidation process. This process is especially strong in people with problems from the gastrointestinal tract.

High humidity

Direct contact with water and other liquids, as well as high atmospheric humidity, provoke the formation of plaque. In some cases, products are deliberately patinated to create a decorative effect, while in other situations it is the result of unfavorable environmental conditions.

How to clean a stainless steel

Household stainless steel products often found in modern kitchens: cutlery (spoons, forks, knives, pots), kitchen sink and stove

The question of their safety is relevant, and therefore we will pay close attention to the methods of care and cleaning from oxides and streaks.

Folk ways

Household tools include:

Baking soda;
Activated carbon;
Table vinegar;
Citric acid or juice.

Apply dry substances by applying to streaked areas and exposure for 1-2 hours for soda, 15-20 minutes for activated carbon. When applied, the coal powder is moistened with a small amount of water, a reaction begins, and a slurry is formed. After processing, the items are wiped with a soft sponge and washed under running warm water.

Vinegar and citric acid are versatile remedies that help to cope with stains that appear on the surface of stainless steel. To process, take a clean flannel cloth, soak in a little vinegar or lemon juice and rub the tarnished parts of the dishes. At the end of the procedure, rinse these areas with clean water and wipe dry.

Purchased chemicals

The assortment includes household chemicals that allow you to effectively deal with darkening and stains on the surface of stainless steel.When choosing, prioritize less harsh chemicals to minimize exposure.

The most common formulations include imported products of the brands "Amway", "Magic Power", "Dr. Beckmann" and others. Before use, heat the dishes to a certain temperature, apply the liquid composition and leave for the time specified in the instructions. Rinse off the product with a sponge under running water and wipe the stainless steel dishes dry.

INFORMATION!

The main advantage of household chemicals is time saving (traces of stains are removed quickly and for a long time). The disadvantage is the high cost of imported products.

Video recommendations

HOW TO CLEAN THE POT, frying pan and other utensils from carbon deposits, grease EASILY? How to wash everything to Shine?

General rules of care

Keeping bronze items clean and tidy is easy by following these rules:

products cannot be stored in conditions of high humidity, as well as to allow prolonged contact with water (after washing bronze utensils under water, it is recommended to immediately dry them with a towel, and then determine to a place where it will finally dry out);
to give a glossy shine, the surface of the product is carefully rubbed with only a soft cloth (when using hard fabrics, scuffs, scratches can be provoked);
slight tarnishing can be eliminated with a saline solution, into which the product is dipped, and then rubbed with lemon;
a quick cleaning of blackness allows toothpaste, which is applied to a soft tissue, and then rubbed with it on the surface of the object (after the procedure is completed, the remnants of the paste are washed off with water, and the object is wiped dry);
to prevent the occurrence of contamination, to protect the surface of bronze objects from green plaque is possible with the help of paraffin, which is rubbed over the entire surface (as a result, a protective layer is created that prevents the occurrence of the oxidation process due to the negative effects of high humidity);
small items, in particular, coins, earrings, rings, are recommended to be stored in velor bags (additional protection for them can be provided by a bag of silica gel that can absorb excess moisture).

Preventive cleaning is recommended by simply wiping the surface of the bronze items with a soft cloth (flannel or chamois cloth).

Methods for cleaning bronze

You can cope with plaque on bronze at home. The following substances and tools are required for cleaning:

rubber gloves to protect the skin of the hands;
soft napkins;
flannel or suede rags;
containers of suitable sizes;
the selected cleaning agent (chicory, vinegar, table salt, ammonia, soda, etc. - you can use one substance or a combination of several).

Chicory

Chicory will help get rid of minor contaminants.

Cleaning algorithm:

Mix the chicory powder with water to obtain a homogeneous gruel.
Apply the mixture to a bronze item or a brass coin. Wipe the surface with a soft brush.
Rinse the item with water, wipe dry.
Polish the surface to a shine with a piece of chamois leather.

Chicory powder will help to quickly and effectively clean bronze from all kinds of contaminants.

Vinegar, flour and salt

The tools at hand that every housewife has in the kitchen will help to remove plaque - vinegar, table salt, flour.

Cleaning procedure:

Rinse the bronze item with running water.
Mix equal proportions of flour and table salt.
Add some vinegar, stir until smooth.
Apply the mixture to the product, leave for 30 minutes.
Rinse off the detergent, wipe off and rub with a soft piece of cloth.

Lemon juice and soda

Natural acid, which is contained in lemon, will help to clean things made of bronze.

Cleaning technology:

Rinse the surface with running water to remove dust and other visible contamination.
Pour 2 tbsp into the container. l.soda, add lemon juice, mix well.
Apply the resulting mixture to the surface and rub in a circular motion. Use a soft cloth or brush to get into the most private corners.
After 20 minutes, rinse the item with running water.
Wipe dry and buff with a piece of soft suede.

Soda in combination with lemon juice will help to cope with dust, rust, black or oxide on bronze.

Peas

You can remove a thick layer of dust, traces of insect activity and other pollution using peas.

Cleaning procedure:

Pour the peas into a large container.
Place the bronze item next to the beans.
Pour the peas with water, put the container on fire.
Boil the product along with the legumes for 1.5-2 hours.
After the allotted time, transfer the item to a bowl of warm water, wash well, and then dry.

Acids, solvents and other chemicals will help remove green plaque and other contaminants from bronze items. When working with such drugs, observe safety measures and strictly follow the instructions.

Ammonia

This method is suitable for cleaning small items such as coins, jewelry, cutlery and other small items. When using ammonia, use a respirator and work in a well-ventilated area, preferably outdoors.

Cleaning technology:

Pour ammonia into a small container.
Place the bronze item in the liquid so that it is completely covered.
Leave it on for 15 minutes.
Remove the item with tweezers, rinse with running water.
Let the garment dry naturally and then polish to a shine with a cloth.

Before starting cleaning with acids or other aggressive agents, thoroughly and carefully clean the product from dust and other contaminants. This will ensure better penetration of active substances to the metal.

Oxalic acid

Oxalic acid will help to remove complex dirt that could not be removed by other means and methods.

To carry out cleaning, there is the following algorithm of actions:

Pour 20 liters of water into a large container, add 200 ml of oxalic acid.
Stir the ingredients until a homogeneous solution is obtained.
Dip the bronze or brass product completely into the liquid. This method is suitable for cleaning bulky items such as chandeliers, dishes, figurines.
After darkening the metal, remove it from the solution, rinse well with running water.
Wipe dry and rub with a soft cloth.

Acetone

Local treatment with acetone will help to remove small dirt on a large object.

Cleaning algorithm:

Soak a cotton pad in acetone.
Treat contaminated areas. Moisten the swab periodically in solvent to keep it moist at all times.
Clean the product until all dirt is removed.
Rinse the item with clean water, dry thoroughly.

Acetone will help you gently but effectively clean any bronze items.

You can clean the bronze from patina, rust and other contaminants yourself at home. Use available household products, household chemicals or aggressive substances for cleaning. At the same time, be careful and attentive so as not to damage the glossy surface, not to leave marks and streaks.

How to clean bronze at home?

Many do not know how to clean bronze. For this, household chemicals, folk remedies are used.

It is important to know how to use the cleaning components correctly in order to achieve a good effect without damaging the metal surface

Cleaning with household chemicals

You can renew the surface of bronze items with household chemicals. Active substances can leave traces on the surface of the metal, which is why they must be used carefully.

Acetone

Bronze items are often cleaned with acetone. Step-by-step instruction:

Soak a cotton pad in acetone.
With gentle movements, drive them through the places of pollution.
When the cotton pad starts to get dirty, you need to quickly replace it.

Wear protective gloves in a ventilated area.

Oxalic acid

An active substance to be used only in case of heavy metal contamination. Bronze cleaning:

Add 150 ml of oxalic acid to 5 liters of water.
Wear rubber gloves. Submerge bronze items under water.
After darkening of the surface and liquid, it is necessary to remove the objects.

After the procedure, wipe them with a dry cloth.

Paste GOI

It is advisable to use this cleaning option only as a last resort, for small items. This is due to the fact that the paste can damage the surface of the metal.

Sulfuric acid and potassium

The most powerful, effective way to remove patina from bronze objects. A product based on these components is used only for severe contamination. Instructions for use:

Add 10 grams of potassium, 20 ml of sulfuric acid to 1 liter of water.
Pour the mixture into a glass jar. Wear protective gloves.
Gently dip the bronze items into the solution.
Wait until the patina begins to move away from the metal surface.
Immerse the products in ammonia.

After the procedure, rinse the product under running water, wipe it with a cloth.

Ammonia

Ammonia is suitable for cleaning earrings, coins, rings. Procedure:

Pour the ammonia into a deep container.
Immerse bronze items in it.
Remove the jewelry, rinse under running water, wipe with a cloth.

Wear protective gloves.

Cleaning with food

You can clean bronze coins, jewelry, and other items with food. These are gentle cleaning options suitable for light soiling. Below will be the best options for using food products.

Soda and lemon juice

Many people clean up using a mixture of baking soda and lemon juice. Step-by-step instruction:

Mix the two components in equal parts. To stir thoroughly.
Apply the paste to the contaminated areas.
Wait 30 minutes, rinse the mixture with running water.

Wipe the items with a cloth.

Vinegar, flour and salt

A product based on vinegar, flour and salt is used to remove plaque and dirt. Step-by-step instruction:

Mix flour and salt in equal proportions. To stir thoroughly.
Add 2-3 tablespoons of vinegar, mix again.
Apply the paste to dirty areas, wait 40 minutes.
Wash off the gruel with water.

Wipe the items with a rag.

Sawdust

Non-standard way of cleaning bronze. Step-by-step instruction:

Mix a small amount of sawdust with acetic acid. Wait until the mixture swells.
Using a woolen cloth, apply the mass, wipe the surface of the object.

Wash off the remnants of sawdust with water, wipe the metal with a rag.

Chicory

Another interesting way to clean bronze. Step-by-step instruction:

Chop the chicory.
Pour the resulting powder into any container, pour warm water. The consistency should resemble thick sour cream.
Apply the resulting paste to the metal surface.
Grind the mixture with a brush.

Wash it off with water, wipe it with a cloth.

Peas

This product is used to remove old layers of dirt. Procedure execution:

Pour water over a deep saucepan. Put the products to be cleaned into it.
Pour a glass of peas into a saucepan.
Put the container on fire, bring to a boil. After boiling, leave the liquid for 2 hours over low heat.
Transfer the products to another container with warm water, clean them from dirt with a brush.

Rinse with cold water, wipe with a dry cloth.

chalk

Minor dirt can be removed with chalk. To do this, you need to carefully rub the product with chalk from all sides. Wash it off with water, wipe it with a cloth.

Boiling water and soap

Another easy way to clean bronze. It is required to boil water. Lather up the soap. Put the products in the resulting foam, wipe with flannel.

Why does plaque appear

A newly cast or finished bronze item is characterized by a dark yellow color. Over time, its surface begins to fade and darken, reaching black. Plaque occurs due to the interaction of the metal surface with air or liquid.

The air contains such active substances as oxygen, hydrogen sulfide, carbon dioxide, water vapor, and other liquids in a vapor state. The molecules of these substances react with copper and tin molecules to form oxides and salts. The oxide layer, consisting of copper oxide, is called black, or noble patina.

Plaque on bronze

There is also another type of patina - green patina. It is also called "wild". Such spots and plaque appear due to the effect of water vapor molecules on the metal. Plaque does not cover the object with a protective layer, but destroys it, penetrating deeper and deeper into the metal layer. The surface is eroded, the resulting depressions grow and turn into depressions. To prevent damage to an item, it must be cleaned by one of many known methods at home or in a workshop.

For this, it may come in handy:

lemon juice;
baking soda (chemical name - sodium bicarbonate);
plain flour;
vinegar 9% (not to be confused with vinegar essence);
ammonia (10% aqueous solution, purchased from a pharmacy);
an aqueous solution of oxalic acid;
finely ground chicory;
an aqueous solution of sulfuric acid;
school chalk;
sawdust.

For work you will need:

cotton rags;
cloth;
wipes for drying the surface;
stainless steel container for mixing and heating the components of the cleaning composition.

Many of the compounds used to clean bronze objects are reactive and can seriously damage the skin or mucous membranes. Therefore, when working, it is necessary to use personal protective equipment:

gloves;
apron;
glasses or transparent face shield;
tight clothing, footwear and headwear, excluding the ingress of active substances on the skin or mucous membranes.

Removing plaque from bronze at home

After cleaning the item by any method, rinse it with water to remove the remains of the composition and be sure to dry it thoroughly. Wet bronze objects are covered with a bloom several times faster than dry ones.

Any plaque that appears on products is a kind of protective reaction of the metal to the environment. Products that are covered with patina, be it coins or figurines, subsequently do not succumb to the destructive effects of air and moisture.

In order to clean bronze and brass products at home, you should initially stock up on items such as:

soft paper napkins;
rubber gloves;
a piece of flannel or suede cloth;
cloth rag;
container for liquid.

It is highly desirable to carry out all procedures in special gloves and goggles to avoid contact with chemicals in the eyes and on the skin.

As mentioned above, the black patina protects bronze from external irritants, especially water and moisture. By itself, bronze is an alloy of four metals: copper, tin, zinc and lead. At high humidity, the process of destruction can begin. Usually it will take many years for complete disintegration, but spoiling the appearance can be much faster.

Methods for cleaning brass products

Regardless of the scope of application of brass metal, products equally need regular maintenance. In the economic departments, you can purchase specialized products or use folk methods. Whatever brass object you have: a samovar, a chandelier or jewelry, the cleaning methods we will discuss will work for each of them.

Soap + paste

Let's start with the simplest recipe. This method is "first aid" for brass products. You will need:

liquid soap;
Toothpaste;
brush of medium hardness.

Pour clean warm water into a basin and add a couple of drops of soap. Soak a brass product in the resulting solution. Leave it on for a few hours. Then take a brush, put a small amount of toothpaste on it and start brushing. Finally, rinse the item under running water and wipe dry.

To remove traces of soot on the surface of brass products, we recommend using low-abrasive sandpaper

Acid + soda

This method is ideal if your garment has been oxidized. You will need:

oxalic acid (technical);
baking soda;
brush with thick bristles.

Apply acid to the entire surface of the brass piece. Leave it on for a few minutes. During this time, you will see a slight darkening of the metal (fear not, this is a natural reaction). Now grab a brush and start cleaning the item, paying special attention to the oxide spots on the surface. Then, while continuing to clean, apply a small amount of baking soda, hold for a while. At the end of the procedure, rinse the product thoroughly under running water.

Acid + water

This method also involves the use of oxalic acid. Add 20 g of acid powder to 1 liter of water and mix thoroughly. Place brass products in the resulting solution and hold them there for a while. Then you can start brushing the metal.

Acetone

This method will help to deal with blackness on the surface of the products. You will need:

acetone;
a piece of cotton fabric.

Apply acetone to the cloth and start cleaning the metal. Blackness and oxide stains lend themselves well to acetone, and you can easily clean the product

Please note that cleaning using this method should only be carried out in well-ventilated areas.

If your favorite brass piece has turned black, don't be discouraged, it's easy to help. Dampen a cloth or cotton pad with acetone and wipe the surface of the item

Salt + lemon

To remove particularly stubborn dirt, the following method is suitable for you. It will require:

table salt (sea salt is also suitable);
lemon juice.

Mix 1-2 tbsp. l. salt with a little lemon juice. Apply the resulting gruel with a generous layer to the area of contamination, hold for a while. Then rinse thoroughly with water. Repeat the procedure if necessary.

In order to avoid the appearance of oxide stains, it is recommended to cover the door handles made of brass with a layer of a special varnish for metal.

Vinegar

This method is the most effective. Prepare the following ingredients:

table vinegar (any percentage);
thick cotton or linen fabric.

Bring the vinegar to a boil... Now gently dip the cloth into the liquid and start wiping the surface of the brass product. Be extremely careful when using this method. Although acetic acid is effective at cleansing dirt, in inexperienced hands it can easily ruin the surface of the metal.

Vegetable oil

This method is perfect for removing minor dirt from decorative brass products (figurines, candlesticks, etc.). In addition to the cleansing effect, this recipe will help clean brass to a shine at home. You will need:

olive oil;
two pieces of soft cloth.

Apply a small amount of oil to one piece of cloth and start cleaning the metal. With a second piece of cloth, remove the remaining oil, while polishing the product. It is not required to wash off the oil with water.

Brass decorative items are distinguished by their strength and durability. And with proper care, they will be able to delight you and loved ones with their radiance and royal gloss.

In this article, we have told you how to properly care for brass products. As you can see, brass care is quite simple and inexpensive. We hope that our tips will help you preserve the beauty of your products for a long time.

Cleaning metal from plaque

Over time, patina develops on metal objects. This is a natural reaction of the metal to the environment. Changes in air temperature, lighting and humidity have a negative effect on bronze items.

Patina is a protective layer that protects the metal from further deterioration. But it is worth remembering that if the patina unevenly covers the object or dark spots appear on the products, then the metal gradually collapses.

To clean metal objects from the result of oxidation, you need to prepare:

Paper napkins;
flannel polishing cloth;
container or container for the preparation of cleaning mixtures;
rubber gloves;
a cloth rag.

Before starting the restoration of bronze items, the items must be rinsed in a solution of soda ash. This will help clean the product of stubborn dust and other contaminants. Especially true for chandeliers, sconces and bronze jewelry. Medals and coins are completely immersed in the solution. Then, the products are washed with running water.

Natural products are often used to clean bronze items. For example:

Chicory. Chicory powder is diluted with cold water to a gruel state and applied to the object with a soft brush, rubbed to a shine. After that, the remnants of the mixture are removed under running water, and the product is polished with a flannel cloth.
Peas. A great way to clear coins or small medals. Put the coins in a container, add peas, add water and boil for about 2 hours. Pea gruel is excellent at removing rust. To do this, mashed peas are laid out on rusted places, allowed to dry, then the products are washed in boiling water and the backward rust is cleaned off with a soft brush. After the procedure, rub the bronze with a soft cloth.
Soda with lemon juice. They help to restore the original appearance of the product, even if the metal has begun to oxidize. On the surface of the object, you need to apply a paste of soda and lemon juice, rub it effortlessly, let it stand, and then rinse the residues with water.

Chemical cleaning agents are also used to clean bronze and brass items. But before using more radical methods of restoring products, it is better to try more gentle cleaning methods. If the patina fails, then chemicals will help. For example:

Ammonia. Suitable for removing plaque and dirt from jewelry and bronze-aluminum coins. Products are placed in a container with ammonia and left for 10-15 minutes. After, pull out with tweezers from the solution and rinse with water.
Acetone. A cotton pad moistened with acetone is used to wipe the object until the disc ceases to be dirty after contact with bronze.
Oxalic acid. Half a glass of acid is diluted in five liters of water, jewelry is lowered there and kept in solution until the liquid darkens. Then the jewelry is removed, washed under running water and rubbed with flannel until it shines. This is a radical method and is used in the most advanced cases.
Paste GOI. Perfectly polishes and removes minor scratches. In hard-to-reach places, it is ineffective. Before starting polishing, I moisten the surface with alcohol, apply the paste using a thick cloth, rub the metal. After the procedure, the metal is rubbed with wax until it shines so that the spots do not appear again.

Household chemicals are suitable for cleaning bronze jewelry:

Laundry soap and fine sand. The cleaning option is suitable for items that do not have fragile elements. The composition is diluted with water to a liquid gruel, the jewelry is immersed there, the container is put on the fire, and brought to a boil. Soap removes dust, and sand removes plaque without destroying metal.
Dentifrice. Using a soft brush, apply the powder to the surface to be cleaned, then rub with a soft cloth until it shines.

When using chemistry, safety precautions must be followed.All work should be performed in a well-ventilated area, away from sources of fire, and rubber gloves should be worn on hands.

How to clean bronze at home?

Cleaning bronze at home is an easy process that anyone can do

It is important to choose the method of removing dirt depending on the type of dirt. For example, you can remove dark plaque with food, and green plaque using chemistry

Cleaning the bronze mixer

Rust removal

Often, due to improper storage of bronze objects, rust appears on the surface of the metal. To clean it, you need to select components for cleaning. For this, peas are suitable.

Brush bronze with gilding

In order not to damage the gilding and bring the product back to its original appearance, you need to use the following methods:

Mix caustic sodium or potassium with water. Wipe off objects.
Stir unboiled water with nitric acid, aluminum salt. Proportions - 30 - 8 - 1. Lubricate the metal surface, let dry in the sun.

Both options are considered dangerous. It is necessary to work with gloves in a well-ventilated area.

Home cleaning methods

The use of natural products for cleaning copper objects and utensils from blackness and green oxides is to use various combinations of the following ingredients: white vinegar, table soda (sodium carbonate), flour, salt, lemon and ketchup. Instructions for use:

Vinegar and salt. Wipe the metal object with a clean rag using the following mixture: one tablespoon of salt and one cup of white vinegar. Another way to remove oxides from copper is to pour three glasses of water into a vessel and dissolve one tablespoon of salt in it, add one cup of white vinegar. Place the copper object to be cleaned into the vessel and bring the contents of the vessel to a boil. After a few minutes of boiling, the plaque should disappear. When the object becomes clean and acquires a characteristic shine, it is necessary to wash it under running warm water and soap and wipe it with a dry cloth. This cleaning method can be used not only for copper products that do not have a protective coating, but also for items that have it.
Ketchup. Apply some ketchup to a copper object, leave the ketchup on the surface of the object for a few minutes, then rub it thoroughly with a clean cloth. Rinse the item with water and it will start to shine again.
Lemon and salt. To clean copper at home, in particular, non-fragile objects from it, for example: pots, pans, coins, turk and other products - you need to cut the lemon in half, put salt on the cut of the fruit and rub the copper object with it. You can also make a paste using lemon juice and equal parts salt and baking soda or flour. Wipe the object with the resulting paste, then wash it with warm water.
Baking soda and lemon. Dissolve baking soda (sodium carbonate) in lemon juice and polish the oxide-coated copper object with the resulting solution using a clean piece of cloth.
Baking soda. There are different ways to remove blackness from copper, for example, you can use regular baking soda. To do this, a tablespoon of this substance must be dissolved in one liter of water. Immerse an oxidized copper product in this solution and boil it for 25-30 minutes, then rinse with water and wipe dry. This method allows not only to remove green plaque from the product and give it a natural shine, but also to get rid of the protective varnish coating, if there was one on the product.
Salt, flour and vinegar. An effective way to remove oxidation products from copper is to use a mixture of one spoonful of salt, one spoonful of flour, and a small amount of white vinegar.After thoroughly mixing the ingredients, a thick paste is obtained, which must be applied to the dirty copper product and, using a dry piece of cotton cloth, wipe the item with small circular motions. Such polishing is able to make the surface of the object mirrored. After completing this procedure, you need to soak a cloth in a solution of white vinegar and water and wipe the item to remove the remaining paste from it. This cleaning method can also be used for products having a protective lacquer layer.

Basic rules for the care of brass products

By following these simple guidelines, you can maintain the shine of brass objects and avoid serious contamination:

If the product is frequently used in the home, try to keep it clean at all times. Wipe the items regularly with a damp cloth or rinse them under running water.
It is best not to let the items dry naturally after washing. So on the surface of the metal, ugly, unclear spots may appear. Be sure to wipe dry products with any cloth, preferably with a natural composition.
Try not to touch the metal with dirty, greasy hands. The prints may not be immediately noticeable, but if you do not adhere to this rule, in the future, the marks may become more pronounced and it will be much more difficult to clean them.
If you wear brass jewelry, we recommend storing it in sealed jewelry boxes and wiping it down from time to time with a soft cloth such as velvet or suede. Also, for cleaning from dirt and polishing, a special napkin for silver items, which can be easily purchased at a jewelry store, is ideal.

Do not use abrasive powders, ammonia-based compounds or other aggressive cleaning agents for cleaning - they can damage the brass.
Brass chandelier maintenance is also easy. Remove dust regularly with a clean, dry cloth. For more intense stains, wipe the brass chandelier elements with soapy water. At the end of the procedure, do not forget to wipe the product dry.
Brass door handles are the most prone to dirt. Street dust, dirty hands - all this negatively affects the appearance of the product. In order to avoid heavy dirt and facilitate metal maintenance, it is recommended to cover the surface of the handles with a special varnish.

Please note that over time, the varnish may begin to wear off - do not allow this, regularly check and, if necessary, renew the coating layer.

If you follow these guidelines and inspect your products regularly, most problems can be avoided. If dirt does appear, we recommend the best ways to clean the brass.

The brass chandelier will be a wonderful element in both modern and vintage interiors. Clean your artificial sun regularly and enjoy its dazzling shine