How to clean the inside of a toilet cistern
Before proceeding with cleaning, it is necessary to drain the water from the tank and turn off the valve of its supply. For a more thorough cleaning, detach all removable parts, which are cleaned from plaque separately.
The principle of cleaning is to fill the tank with a special compound that effectively breaks down dirt, grease, plaque and lime deposits. It can be a household cleaning product, or you can independently prepare a solution from the ingredients that are in every home.
Laundry soap
Grate a bar of laundry soap on a fine grater and dissolve the shavings in warm water. As a rule, 1/3 of the entire bar of soap is enough for 5 liters of water. Depending on the degree of contamination of the tank, the amount of shavings can be either increased or decreased. After the mixture is prepared, it is poured into the tank and left for 20-30 minutes. After the elapsed time, the tank is cleaned of dirt. with a brush, a rag or a hard sponge, and the liquid is drained.
Citric acid, vinegar
As you know, these funds are inherently acids, therefore, with their help, limescale from hard water and stone are perfectly removed. Any of the products must be poured into a spray bottle, evenly applied to the walls of the tank and left for 30-40 minutes. Since the agent will drain to the bottom of the tank, it is permissible to repeat the procedure periodically. Next, the walls are cleaned with a stiff brush and washed with clean water, possibly with a detergent.
Soda
The use of baking soda is also quite simple and does not require additional funds. A gruel is prepared from it, diluted with water and the mass is applied to the walls of the tank for 30-40 minutes. Next, the tank is cleaned with a sponge or brush and the walls are washed with clean water. In addition to its cleansing properties, baking soda also perfectly removes unpleasant odors.
Household chemicals
To clean the toilet tank from the toilet, you can use quite different household chemicals:
- dishwashing detergent;
- cleaning powder products;
- universal compounds for any surfaces;
- whiteness.
But the best option would be a special tool for plumbing.
In this case, when buying, you should pay attention to the composition label. As a rule, it should indicate what it is intended for.
If the picture shows a toilet, you can safely use it to clean the drain tank. The most effective remedies include:
- Dressing duck;
- Cillit Bang;
- Sarma;
- Comet;
- Unicum;
- Bref.
Using household chemicals is a little easier than folk remedies, since you do not need to apply the composition to the surface of the walls and wait a while. It is enough to apply the mixture to the brush and clean all problem areas inside the drain tank.
10 ways to clean the cistern with improvised means
 |
Method 1: soap solution Process:
For a more thorough cleaning of the tank, remove the float and siphon, wash all parts with water and powder |
 |
Method 2: vinegar Process:
Do not drain the toilet during the cleaning process: the vinegar flowing into the toilet will cleanse salt deposits on its walls. |
 |
Method 3: skin
Process:
This tool will allow you to get rid of limescale, which is heavily embedded in the walls of the plumbing. |
 |
Method 4: White
Process:
Whiteness and other chlorine-containing products will help get rid of rust and soft deposits. |
 |
Method 5: washing powder
Process:
This method will help cleanse the toilet bowl of soft and fresh plaque. |
 |
Method 6: Coca-Cola
Process:
This tool is able to cope even with a thick layer of old lime deposits. |
 |
Method 7: toothpaste
Process:
This method works like a toilet pill. So you can remove fresh plaque, disinfect plumbing and remove unpleasant odors. |
 |
Method 8: battery electrolyte
Process:
Use a face mask and hand gloves while cleaning |
 |
Method 9: citric acid
Process:
Citric acid will help dissolve limescale |
 |
Method 10: soda
Process:
|
Cistern cleaners
On sale there is a huge amount of household chemicals for cleaning toilets and cisterns from rust and limescale. All of them can be divided into several types:
Abrasives in the form of pastes or powders. They require physical effort, since after applying them to the walls, it is necessary to rub by applying force.
Alkaline detergents. They not only bleach, but also perfectly disinfect plumbing fixtures, killing harmful microbes and bacteria.
Acidic products
They do an excellent job with any kind of plaque, but require special care when using.
Pemolux.
Comets, Dressing Duck, Domestos.
Bref Power-Active.
Alkaline solution.
The most popular household chemicals for cleaning all types of plumbing:
- Domestos;
- "Typhoon";
- Sillite;
- Tyrone.
To clean the cistern and toilet bowl from rust and limescale, you can use the home remedies that every housewife has:
- Lemon acid. Actively fights rust and limescale. It is necessary to pour 2 sachets of citric acid into the tank and rinse with water after 3-4 hours. The plaque will become soft and easily come off the walls of the plumbing fixture.
- Treat the tank from the inside with a composition of soda, water and vinegar. Pour a liter of vinegar and 6 tablespoons of soda into 5 liters of water. Leave the resulting composition for 2-3 hours and rinse with water.
Regardless of which cleaning agent for the toilet cistern was chosen, the main thing is to observe precautions and carry out all work with rubber gloves. Lemon acid.
Soda + vinegar.
Lemon acid.
Soda + vinegar.
The use of household chemicals
The easiest way to get rid of the problem of rusty streaks and deposits in the toilet is with the help of modern household chemicals. This is the best toilet cleaner for rust and other dirt.Moreover, they can be used to remove unsightly stains not only in the plumbing bowl, but also in the cistern. This will prevent drips from forming during further use of the toilet.
Important!
If gentle care methods do not give a result, then more aggressive formulations are used. But before using them, it is recommended to take protective measures: put rubber gloves on your hands, and protect your face with a special mask or respirator.
Cleaning Powders
Store-bought products in powder are an effective and safe way to remove plaque from the toilet. For this purpose, such cleaning agents as "Pemolux", "Sarma", "Komet" and others are suitable. They have approximately the same composition and a similar method of use.
The product is spread over the pre-moistened surface of the bowl and left to act for 30 minutes. Then the softened deposits are cleaned with a stiff brush and the impurities are washed off with water. If the deposits have not completely departed from the first time, the treatment is repeated.
Chlorine bleaches
These products are a great way to combat urinary stones and limescale. Due to the chlorine content, they clean the plumbing white. "Whiteness" or other means with chlorine in the composition is poured onto the contaminated areas and left to act overnight. In the morning, clean the surface with a brush and rinse.
To enhance the effect, you can first treat the stains with an alkaline cleaning powder and then add chlorine bleach. After that, they once again clean the dirt with a brush and wash off everything with water.
Important!
Chlorine is released when the powder and bleach react. Therefore, be sure to protect your face with a respirator and connect the hood. When performing work, there should be no bystanders nearby.
Application of battery electrolyte
The main active component of the electrolyte is sulfuric acid.
Therefore, use this substance for cleaning with care. Do not allow electrolyte to spill onto rubber or plastic elements
Before work, you must definitely take care of protective equipment. The electrolyte must not be used if the sewer pipes are made of plastic.
To cleanse dirt, 150 ml of electrolyte is carefully poured onto the walls of the toilet bowl, spreading over all contaminated areas. Close the toilet lid and wait 10 minutes
Then the water is drained and the soaked dirt is cleaned with a brush. After that, the water is drained again.
Cleaning dirt with phosphoric acid
This substance has excellent cleansing properties. It removes rust, urinary calculus and limescale, while being gentle on plastic pipes. Therefore, phosphoric acid is allowed to be used in houses with PVC sewers.
The agent is poured onto the walls of the toilet bowl and distributed with a brush under the rim. After waiting a quarter of an hour with the lid closed, clean off the dirt with a brush and drain the water.
Application of hydrochloric acid
This product is also gently poured down the sides of the toilet and the lid is closed for 15 minutes. After the dirt and deposits have softened, wash off the hydrochloric acid with water. Clean the dirt with a brush and drain the water again.
Important!
Hydrochloric acid, like electrolyte, is very dangerous. Therefore, before work, be sure to protect hands, face with gloves, a respirator. Do not allow this substance to come into contact with rubber or plastic parts. This liquid eats away at plastic, so it cannot be used if the drain is made of PVC.
Use of oxalic acid
Oxalic acid is sold in powder, which is spread with a rag or sponge on the dirty places, under the rim of the plumbing. After that, the toilet lid is closed, the substance is left to act for 1 hour. Then the softened deposits are cleaned off with a brush, washed off with water.
Oxalic acid is poisonous
Therefore, before work, it is important to put on rubber gloves on your hands, and on your face - a mask or respirator. During operation, they also turn on the hood
How to clean the inside of the tank
Today on the market there is a large selection of sanitary and hygienic products for the care and cleaning of plumbing, which are designed to clean surfaces from rust (iron oxide contamination), hardness salts, layers of hardly soluble oxalates and urates, human waste products. These drugs also have a disinfecting effect and deodorize the room. Allocate:
- Abrasive cleaning agents containing fine-grained solids of artificial or natural origin: chalk, quartz sand, pumice stone, fused corundum.
- Acid-based preparations. Most effectively, hydrochloric acid removes limestone and rust deposits from the surfaces of sanitary equipment. To remove dirt, you need to pour abundantly the cleaning solution onto the surface to be treated, after draining the water and draining it, and leave it for 30 minutes. Then use a plastic stick to clean the plaque, and in places where it cannot be removed, pour over the solution again.
- Sanitary and hygiene products based on alkali (sodium hypochlorite). The method of application is similar to substances containing acids.
It should be remembered that when working with acids and alkalis, precautions must be taken to protect the mucous membranes and skin of the hands with personal protective equipment. Products for the automatic care of plumbing fixtures, which are hung in the toilet or in a waste container, or lowered into a tank
Evenly and gradually dissolving, these preparations clean the surface every time the water is drained. Distinguish between acidic blocks, slightly alkaline compositions containing mixtures of surfactants (surfactants) and fragrances, blocks that contain a whitening agent
Products for the automatic care of plumbing fixtures, which are hung in the toilet or in the drainage container, or dipped into the tank. Evenly and gradually dissolving, these preparations clean the surface every time the water is drained. There are acidic blocks, slightly alkaline compositions containing mixtures of surfactants (surfactants) and flavors, blocks that contain a whitening agent.
By consistency, cleaning preparations are divided into liquid and pasty (gels, suspensions, emulsions) and solid (powders, granules, tablets).
Sanitary and hygienic substances can be both gentle and potent.
Among the first group, there are:
- laundry soap (liquid);
- Pemolux;
- "Cinderella";
- synthetic powder and liquid detergents;
In the second category, the most popular are:
- Cillit Bang Lime and Rust (toilet gel);
- "Dressing duckling active 5 in 1" (gel);
- Domestos 100%;
- "Comet 7 days of cleanliness for the toilet";
- AIST Sanox ultra;
- Sanita Anti-rust;
- Faberlic Toilet Bowl Cleaner;
- "Sarma" (gel for plumbing);
- "Sanfor universal 10 in 1";
- "Chistin Sanitary".
Prevention of plaque and rust formation inside the tank
The best way to deal with limescale and corrosion spots is to prevent them from forming. If you spend a little time on your plumbing hygiene for a month, it will look like new for years to come.
Cleaning tablets will prevent dirt, deposits and bad odors from building up. If you put one tablet in the tank of the tank every 3 weeks, it will turn the water blue or green and neutralize corrosion, lime and unpleasant odors.
In the houses of the old years of construction, water is running, saturated with rust from pipes that have served a long time. To cope with the problem, it is necessary to replace old cast-iron pipes with modern ones made of metal-plastic or polypropylene. Then there is almost no need to deal with rust in the tank.
In order not to have to suffer, wiping old stains, it is necessary to develop the habit of regularly cleaning the toilet and cistern. Fresh deposits can be easily removed with a simple cloth and any cleaning gel or powder, without resorting to secrets and tricks.
Cleaning the tank with improvised means
Sodium baking soda
It is possible to carry out high-quality cleaning of the drain container and its contents with the means that are at hand in almost every home.
You can count on excellent results if you clean the tank and fittings with the following means:
- Table vinegar. This product is a dilute acid. Vinegar is good at removing limescale and rust. They can safely process faience, metal and plastic. Do not use acid to clean the drain plug. Rubber hardens and cracks from contact with vinegar, leading to leaks.
- Baking soda. It should be applied wet with a brush or sponge. After application, thoroughly wipe all surfaces. Soda corrodes well all types of deposits. After 40-50 minutes, rinse the tank thoroughly, especially the hinge joints.
- Coca-Cola carbonated drink. Although it is considered safe to consume by mouth, the drink eats away even old and thick deposits. Pour Coca-Cola into the tank, cover and leave overnight. The next morning, the walls of the tank and fittings will shine with perfect cleanliness.
If your home does not have any of the above, then you can use toothpaste. Only a third of the tube is enough for high-quality cleaning. The paste is applied to parts, walls and left for an hour. After that, you need to treat everything with a brush and start up the water.
What type of pollution are there, and why do they occur?
These can be lime deposits and rust. One of the reasons for their occurrence is a urinary calculus that has eaten into the walls of the plumbing. You can prevent it from settling if you regularly use a brush and detergents. Also, a toilet tablet placed in the tank will release a cleaning agent when drained, which washes away urinary stones and deodorizes the air in the sanitary room.
Poor water quality in plumbing using old cast iron or metal pipes also leads to the formation of rusty and limescale deposits. Over time, the pipes oxidize and rust, which leads to red traces. Therefore, it is recommended to replace such pipes with metal-plastic or polypropylene.
To purify water from iron compounds, sand and other particles that destroy the surface of plumbing, it is advised to install cleaning filters at the entrance to an apartment or house.
Another reason for the appearance of red traces may be an unregulated drain, where a stream of water constantly flows and iron salts are deposited along its edges. To eliminate the appearance of rust, it will be enough to adjust or replace the float in the tank.
You should also pay attention to the quality of the material from which the plumbing is made. Products made of low-grade earthenware have a rough surface and micropores, in which dirt and iron salts settle well.
And for plumbing equipment made of glazed earthenware or porcelain, the possibility of rust formation is significantly reduced.
How to remove limescale?
Limescale is most often formed in areas with high water hardness. To get rid of it, remove water with a plunger, fill the bowl with washing gels, leave it for a couple of hours and clean it with a brush.
In more complex situations, cardinal methods are needed, which may require:
- hard brush;
- gloves;
- vinegar;
- iodine;
- baking soda;
- lemon acid;
- white.
The above method with the use of vinegar and soda or citric acid perfectly helps from limescale. Other methods include:
Application of whiteness. The algorithm is simple: first pump out the water, then pour a bottle of this chemical agent overnight, and in the morning rinse it off with warm water
If the effect is insufficient, these actions are repeated.
Removal with oxalic acid, but when working with it, it is recommended to follow all the precautions indicated in the instructions. It is allowed to work with this powder only with rubber gloves.
It is applied to a damp cloth and then the plaque formation is wiped off. You will need to leave it for about an hour., and then the sanitary ware must be thoroughly washed.
Coca Cola. It is poured into a bowl, left for several hours, and then the plaque is removed with a brush.
Iodine monochloride can be purchased at any veterinary pharmacy. They are poured with pollution and washed off after a couple of minutes. Not recommended if the house has cast iron or aluminum pipes.
Why plaque forms in the toilet
The main "enemies" of cleanliness in the bathroom and impeccable type of plumbing include urinary stone, limescale and rust. Let's take a closer look at the problem:
The formation of urinary stones is a serious and intractable problem for those who do not know how to deal with it. Sediments are formed at the bottom, in the place of accumulation of water. A urinary stone is a complex compound based on the mineral salts found in human urine.
As a result, a persistent brown coating forms on the bottom of the toilet, and when there is a lot of deposits, this can lead to a decrease in the diameter of the drain hole. For this reason, get rid of from urinary stones need immediately after its appearance.
The appearance of limescale is due to the calcium salts that tap water contains. The more of these compounds, the higher the water hardness and the more abundant deposits.
Plaque forms on the inner surfaces of the toilet and in the cistern. Lime deposits are the ideal "base" for other types of contamination, and to prevent this from happening, it must be removed immediately.
Rusty streaks on plumbing are caused by poor water quality and poor condition of water pipes. If the system is old, and a large amount of rust has formed inside, its particles along with water fall on the surface of the plumbing, forming orange-brown streaks. It should be remembered that the "older" the stains, the more difficult it is to remove them and clean them in a timely manner.
How to clean the toilet from urinary stones, rust stains and lime deposits? Dealing with contamination on the surface of plumbing is not difficult if you know how to do it and act in accordance with the rules.
Professional methods
Using store-bought cleaning products is the easiest way to solve the problem of removing rust from the toilet. By the way, unsightly spots can be not only on the toilet, but also in the cistern. Rust removers will be the same. Moreover, if you have changed the toilet, and the cistern remains old, then be sure to attend to the issue of cleaning it. Otherwise, the new "white friend" will soon be overgrown with bloom. You can choose one of three types of products:
- abrasive powders such as pemolux. The cleaning process is to apply an abrasive to the cloth and wipe off the rusty stain. After a 15–20 minute procedure, the residues of the product are washed off. The option is rather tedious, despite its effectiveness. A significant disadvantage is that as a result of the action of the powder on the surface of the toilet bowl or cistern, microcracks are formed, which are even more susceptible to contamination. And next time, scrubbing may not be so successful, as the stains will eat into the pores of the material from which your bathroom is made. For the same reason, you cannot remove rust mechanically, that is, scrape off with sharp objects;
- alkaline foods. For example, Domestos. Due to the content of caustic sodium, the rust will dissolve without affecting the surface. Simply apply the product to the problem area for 15–20 minutes and then rinse it off. There is practically no effort, but for heavily stubborn stains, the method may turn out to be powerless.
Liquid cleaners in curved-necked bottles can be conveniently applied under the rim of the toilet
Folk remedies
Folk recipes are no less effective in cleaning the toilet, their use in many cases is safer than removing rust from the toilet with professional chemistry.
Folk remedies can be no less effective than household chemicals.
Vinegar
This is the most popular folk toilet cleaning solution. In its pure form, vinegar does an excellent job of removing smudges. To do this, it must be applied to a dry surface with contamination and left for 10 minutes or more. It is possible to determine the beginning of the action of the agent visually - when the contamination "floated", it is possible to flush it. If the result was not achieved the first time, you can repeat the above procedure.
Among folk remedies, vinegar is the most popular.
Alcohol
Alcohol can only remove shallow contaminants; it is more effective for prevention than for thorough cleaning of the toilet bowl. Also, due to the high volatility, a much higher amount of alcohol may be required compared to other methods.
Only surface contamination can be removed with alcohol.
Ammonia
The cleaning result can be enhanced by adding hydrogen peroxide to the ammonia. Both of these substances are readily available in pharmacies. The working solution is obtained from the ratio of 1 part of ammonia to 20 parts of peroxide, applied to a sponge and rust is removed. In most cases, ammonia copes perfectly with small and did not have time to grow old.
The ammonia copes well with light dirt.
Oxalic acid
Oxalic acid is used in powder form. It is applied and left in this form for an hour. Then you need to wipe off the dirt with a sponge, rinsing off the residue with water. When using this acid, be careful not to inhale the vapors or get the product on the skin.
Oxalic acid is a rather aggressive agent, so you need to use it carefully.
Hydrochloric acid
The most aggressive and dangerous, but at the same time the most effective rust remover. It copes with even the most chronic divorces in 5-10 minutes. However, when working with this acid, it is necessary to protect not only the hands, but also the eyes, as well as the respiratory system.
Hydrochloric acid is the most effective, but also dangerous substance. You need to work with her in full protection.
Toothpaste
Paste in the case of slight contamination allows you to quickly eliminate it. We apply it on the rust and leave it for 30-50 minutes, after which we thoroughly process the surface with a soft metal sponge and wash off the remnants of the product.
The toothpaste gently removes small impurities.
Lemon acid
Quite an effective acid that destroys not only rust, but also urinary stone and lime from the surface of faience. The best result can be achieved by first leaving the acid on the surface of the contamination for a while. Then we process it with a sponge and rinse it off.
Citric acid fights not only rust, but also other contaminants.
Carbonated drinks
The use of the most common soda is justified for light contamination.
It is important that the drink contains phosphoric acid, which allows cleaning. We wash the toilet with soda, leave for 30-40 minutes, rinse
Lime deposits can also be removed along with the rust.
To deal with rust, the soda must contain phosphoric acid.
How to remove a stone in the toilet with folk remedies
If you need to tidy up your plumbing, you can use a range of products that will not only help remove plaque, urinary calculus and rust, but also restore the lost shine and whiteness of the surface.
Cleaning chemicals
In household chemicals stores, you can choose the necessary product, a variety of gels, liquids and powders are presented in a wide range.How to clean the toilet with a store-bought product? All you need to do is follow the instructions thoroughly, and the problem of cleanliness in the bathroom will be solved.
However, many housewives avoid using special products. This is due to the high cost of the chemicals as well as the high toxicity. In such a case, there are a number of folk remedies that you can use without fear of harming your health.
Baking soda
This tool copes well with dirt on plumbing equipment and is suitable for cleaning the toilet bowl from various dirt. Pour a packet of baking soda into a previously "dehydrated" toilet and let it sit overnight. You can carry out these manipulations in the morning, before leaving for work. The main thing. That the toilet was not used for 8-10 hours.
After the specified time has elapsed, clean the dirt with a brush, and rinse off the rest of the product with water. Soda not only has the ability to remove various kinds of pollution, but also whitens the surface.
Warm vinegar solution
Heat 1 glass of 9% vinegar and pour it into the toilet without water for 2-3 hours, then clean the surface of stains. Vinegar is effective against limescale and also dissolves urinary stones.
To achieve the maximum effect, you can make such a toilet bowl remedy with your own hands: add iodine, soda or salt to the vinegar solution (in the proportion of 1 teaspoon of the product per glass of vinegar). In this case, the agent must be kept for at least 8 hours.
Lemon acid
Empty the toilet cistern and pour 2-3 tablespoons of acid into it. Leave it on for 3 hours and then brush it off. The procedure will need to be repeated several times to get rid of plaque and urinary stones.
Citric acid will not only remove impurities, but also unpleasant odors. You can use it to make your own toilet freshener. Just dissolve a couple of tablespoons of the powder in 1 glass of water and treat the surface.
Vinegar essence
If the vinegar solution does not cope with the contamination, you can apply a 70% concentrate. Remove the water from the toilet and pour the essence inside. After 3 hours, clean the surfaces with a brush and drain the water several times to rinse off any caustic residue.
"Coca Cola"
A drink of little use for quenching thirst, however, is very useful in the household. It will also help when cleaning the toilet.
Pour 1.5–2 liters of drink into the toilet bowl at night, during this time caustic substances "loosen" the plaque, and you can easily remove their remains with a brush.
These products are effective provided the plumbing is cleaned regularly. But what to do with stubborn and stubborn deposits? There are several "serious" remedies.
How to clean the toilet
First, try cleaning the toilet cistern without removing the mechanism from it. If the contamination is not very large, this method may work.
You need
- 300 g citric acid
- 1 liter of 9% vinegar (if the contamination is very large)
- 9 l of water
- suitable breeding container
- dish brush
- old toothbrush
- several cotton pads
- toilet paper
Progress
Drain all the water from the tank. You will also need to shut off the water supply while cleaning.
Remove the tank cap by first unscrewing the ring around the drain button.
There are usually two mechanisms inside the cistern. On the left is a water shut-off valve.
On the right is the water drain mechanism. Both on the inner surface of the tank and on the mechanisms, limescale, rust and other contaminants are visible.
Dilute 300 g of citric acid in 3 liters of boiling water until it is completely dissolved
After that, add warm water (you can from the tap) to bring the temperature of the solution to 45-50 degrees.
Important! It is not recommended to pour boiling water into the tank, since the latter can crack from a sharp temperature drop.
The solution for cleaning is ready, now you can fill the entire tank with it and pour over the drain mechanism, the top of which remains above the surface of the solution.
After 15 minutes, the action of the solution appears. The limescale begins to flake off and disappears before our eyes.
To clean the drain, place cotton pads soaked in citric acid solution on it.
To remove dirt on the walls of the cistern that remains above the water level, cover them with toilet paper dipped in a citric acid solution.
Close the toilet cistern with a lid and leave the solution to work for 6-8 hours, preferably overnight.
After 8 hours, remove all toilet paper, cotton pads and start cleaning with the same solution.
Use dish brush or old toothbrush.
When everything is cleaned, drain the dirty water and open the water tap so that the tank is refilled with clean water.
If the contamination is not very large, this should be sufficient.
As you can see in the photo, the ideal result was not achieved. Most of the contamination remained on the water release mechanism.
So keep cleaning. Use vinegar instead of citric acid this time.
Heat it up to 40-50 degrees.
Drain the water and add the heated vinegar while filling the tank.
Leave the solution in the tank for 2-3 hours. The vinegar will eat away plaque and rust. Then repeat the cleaning process.
If complete cleaning has not been achieved this time, you will have to remove the mechanism from the tank. This is not difficult to do.
First, remove the water drain mechanism. To do this, take it by the body and turn it counterclockwise (to the left).
There is then enough space to easily remove the water shut-off valve. To do this, unscrew the nut under it counterclockwise (to the left).
Clean all removable parts separately.
After final cleaning, reinstall all mechanisms. This is done in the reverse order: first install the water shut-off valve, then the drain mechanism.
Open the water tap and check that everything is working properly.
As you can see, we managed to almost perfectly clean the toilet cistern from dirt. Close the tank with the lid and turn the button clockwise (to the right).
Check again how the toilet flush works.
The toilet cistern was cleaned successfully, it shines clean again and can serve you for many more years without any problems.
In the realities of the modern lifestyle, we do not always have enough time to bring perfect cleanliness. Learn how to remove grease and dirt from stove knobs in no time. These useful tricks will come in handy for any housewife.
We also suggest that you familiarize yourself with an excellent way to remove soot and fat in a hood in no time. And 10 more life hacks for a flawlessly clean kitchen!
Previous articleNext article
Nikolay Laduba
Nikolay Laduba loves to spend time actively, is engaged in hiking. He's a big fan of science fiction. The son of Nikolai is only 7 years old, but he shares his father's hobbies: what could be better than getting cozy and watching the Star Trek series with the whole family? Our author approaches all questions thoroughly, as evidenced by the quality of his articles. Nikolai's favorite book is The Black Prince by Iris Murdoch.
How to remove not too old plaque
It is enough to carry out weekly cleaning with one of the home or special industrial preparations and there will soon be no trace of the yellow plaque. So that the plastic itself does not suffer, before whitening the toilet lid from yellowness, it is advisable to check the effect of various agents in a small area of it.
Table vinegar
Ordinary 9% vinegar perfectly removes both limescale and urinary calculus on the inner surface of the toilet bowl, but if there is a little yellowness on the lid, it will cope with this problem:
- a glass of vinegar is heated to about 40 ° C;
- on yellow places apply a paste of soda, slaked with warm vinegar;
- lower the lid and leave in this state until morning.
In the morning, it is enough to rinse off the remaining soda with water.
Lemon acid
This substance acts slightly weaker than vinegar, but also helps to wash off not old yellowness.One sachet of acid is slightly moistened and rubbed with it on the yellow areas on the lid. After 10-12 hours, everything is thoroughly washed with water.
