How to remove carbon deposits from silicone bakeware: 5 best cleaning methods

We clean the aluminum baking sheet

Aluminum kitchen utensils are not afraid to remove dirt with fine powders and hard metal brushes. All of the following applies to the aluminum baking sheet. How to quickly remove burnt fat from the surface:

remove the remnants of ready-made dishes;
soak a baking sheet in hot water with the addition of dishwashing liquid;
rinse with water;
sprinkle soda or salt on the bottom, rub with a sponge;
if it is not possible to remove carbon deposits, then use a metal brush.

A positive result can be expected if the contamination is not old.

Aluminum baking sheet.

Aluminum treatment with soda and mustard

How do I clean old fat from a baking sheet? In many cases, only baking soda and mustard powder will help to deal with greasy dishes. At home, you can wash baking sheets with these products:

sprinkle soda or mustard powder on the contaminated surface;
pour hot water and leave to soak for several hours;
additionally treat the surface with dishwashing gel and dry with a towel.

Cleansing with baking soda and salt

Folk remedies that can be used to combat contaminated surfaces are soda and salt. For this you need:

prepare a mixture: 3/4 cup baking soda, ¼ cup salt and water, stir;
process the bottom of the baking sheet with this mass overnight;
in the morning, remove dirt with a dishwashing detergent;
wipe the entire surface dry.

Removing fat by digestion

If the baking trays are heavily soiled with fat, you can use boiling. When a woman washes surfaces in this way, it is worth considering some subtleties:

put the baking sheet in a volumetric container;
pour water to completely cover the surface to be cleaned;
add two tablespoons of dishwashing liquid and baking soda;
boil the dishes for half an hour;
to achieve a positive result, add a spoonful of "Anti-Fat";
when the baking sheet is cool, rinse with water.

Do not remove the hot baking sheet from the water so that the surface does not burst. Better to wait until it cools down.

Baking trays with glass, ceramic and enamel surfaces are dishwasher-safe. To wash them well, you should set the temperature program, as for pots at 65 degrees.

We clean up contamination with baking soda and vinegar

You can wash the surface from carbon deposits by a simple method:

pour water, a small amount of soda and vinegar into a baking sheet;
put in an oven preheated to 100 degrees for 20 minutes;
cool and rinse, glass surfaces lend themselves particularly well to such cleaning.

Annealing with salt

A tried and tested method based on exposure to high temperatures can be used to clean the baking sheet. Fat Removal Stages:

salt is poured onto the bottom of the baking sheet with a layer of at least 0.5 cm;
it is put in an oven preheated to 100 degrees;
when the salt turns brown, the baking sheet is removed from the oven;
rinse with water using a sponge.

Digesting a baking sheet with dishwashing liquid and baking soda

How to wash old stains? This method is considered the most effective for removing stubborn deposits and greasy stains.

For such processing, you can use dishes (saucepan, basin, boil), which is much larger than the baking sheet in size.

The process takes place in several stages:

pour enough water into a large saucepan so that the baking sheet is completely covered with it;
add preparations: 2 tablespoons of dishwashing gel and the same amount of soda;
put on fire and boil for half an hour;
wash under running water;
remove the remaining greasy spots with a hard sponge.

Difficult dirt on silicone molds

If you have been using silicone molds for a long time, then you might be interested to know how to wash silicone molds from old fat and other stubborn stains?

Using liquid soap when cleaning silicone molds

There is a method that is well suited for removing old stubborn fatty deposits, berry juice, and carbon deposits from the walls of dishes.

3 liters of water;
2 tbsp. l. soda;
3 tbsp. l. liquid soap.

Dissolve soap and baking soda in water and put on fire. It is necessary to boil the molds in the resulting soap solution for 5 minutes, then remove the container from the heat, leave the molds in the boiling solution for another 20 minutes, then remove, if necessary, rub the stains with a soapy sponge, rinse under running water and dry.

Vinegar essence when cleaning silicone molds

Sometimes the housewives have a question, how to wash the silicone mold from carbon deposits? Try the following. Dip the mold in hot water for 10 minutes, when it gets wet, clean it with a special cleaning paste made from soda slaked in vinegar. After soaping the molds with paste, leave them for 15-20 minutes, then rinse and dry.

There is another way. Both options are similar, choose the one you like best:

1 tbsp. l. baking soda;
½ tsp vinegar essence;
2 liters of water.

Dissolve the baking soda and vinegar in the water, and as soon as the reaction begins, dip the molds into the sizzling solution. Soak them for 1 minute, then wash the molds with soap.

Water for solution preparation

And here is one very extraordinary way of how to wash a silicone mold from burnt fat. Mix:

washing powder - 0.5 cups;
unrefined sunflower oil - 0.5 liters;
water - 3 liters.

This mixture is put on fire. First, it is necessary to bring the solution to a boil, as soon as the water boils, reduce the heat (otherwise the liquid will foam strongly). Throw the molds into the boiling solution and boil for 10-15 minutes. Then take out and wash them with a sponge and soap. If the adhered fat still does not come off well, repeat the boiling process.

The use of bleach when caring for a silicone mold

This tool is recommended for dealing with particularly difficult contaminants that are not amenable to standard cleaning methods, and the use of oil in boiling solutions has ancient roots. As it turned out, in the days of our grandmothers or even great-grandmothers, when there were not so many cleaning agents as now, oil was considered an excellent bleach for fabrics.

Silicone baking dish set

It was added to the water while the laundry was boiled, and oil was just as common and common as bleach is to us today. This popular recipe has another advantage over modern bleach: the oil added to the soapy solution for boiling not only bleaches, but also does not damage the fabric.

Silicone Cookware Care

The described recommendations are an almost complete list of required compliance rules for dealing with silicone tins for baking. If the described rules are strictly observed, then beautiful and bright molds will serve you longer, helping in the process of creating culinary products that are impeccable in design and excellent in taste.

Washing powder for cleaning silicone molds

All that is required of you is to be careful and frugal, as well as patience in the cleansing process. In addition, the recipes for cleaning liquids given in this article will also come in handy for cleaning other utensils in the kitchen.

Join the discussion! We would be interested to know your point of view, leave your opinion

How to clean old grease from dishes

To prevent fat from being deposited in layers on the dishes, it must be washed immediately, after each meal. If you do not have the opportunity or desire to wash the dishes after dinner, soak the plates in warm water, after adding detergent there.The fat will not be able to solidify on the bottom and sides of the plates. The detergent will partly dissolve the fat overnight, and in the morning you can easily wash all the dishes to a shine.

The washed dishes must be wiped with a dry towel to remove any remaining moisture. This will prevent corrosion.

Old deposits of fat should be removed using commercial chemicals. There is a wide range of detergent compositions on the modern market. When cleaning utensils from old fat layers, apply the purchased product to a dirty place and wait for a while, specified by the instructions. Then it remains to clean off the fat with a sponge or brush.

Once again, when buying a detergent, carefully read the instructions. Not all are suitable for use on aluminum cookware or Teflon coated items.

How to choose safe household chemicals

A store-bought product will allow you to quickly and carefully wash the dishes, remove the remaining grease, soot and give it a shine. On the shelves, you can find it in the following release forms:

Liquid gels. They are used for daily processing of dishes by hand. The most relevant among buyers are "Bio Mio", "Biolan" and "Sort".
Powders and tablets. Dishwasher-safe, they dissolve quickly and rinse off easily.

It should be borne in mind that not every detergent is suitable for glass processing. When buying it, it is worth considering that it meets the following requirements:

absence of chlorine bleaches, phosphates, caustic alkalis and acids;
the presence of concentrates, which allows the liquid to foam easily and gently remove dirt.

Carefully examine the packaging of the purifier. It is recommended that it bears an inscription that it has passed dermatological testing and is absolutely safe for health. This suggests that after using it, there will be no allergic reaction and no irritation on the skin of the hands.

How to clean metal trays from grease and carbon deposits at home

In the fight against fat, chemical and abrasive agents help well. Let's figure out how you can quickly wash a baking sheet from burnt fat.

Wash off using an abrasive

The quickest and safest way to get rid of carbon deposits is to soak the baking sheet first. The procedure is as follows:

remove food leftovers from the surface;
pour warm water and a couple of drops of dishwashing gel onto a baking sheet;
let it stand for 1-2 hours;
wash off the remnants of dirt with water;
cover the places where the fat remains with fine sand, soda, salt, then remove everything with a sponge.

There are many popular ways to remove grease and carbon deposits from dishes.

Ignite with salt

Many housewives who have tried this method claim that it is quite effective. Any table salt will do, except "Extra".

The means for cleaning the baking sheet must be selected based on the material from which it is made.

Procedure:

cover the bottom of the baking sheet (about 1 cm) with salt;
put the dishes in an oven preheated to 100 ° C for half an hour;
remove the baking sheet as soon as the salt darkens;
after the leaf has cooled, wash off the salt with warm water.

Remaining stains can be easily removed with a sponge and the same salt.

Experienced housewives know how to clean a baking sheet for the oven at home.

A mixture of baking soda and vinegar

Soda and vinegar have long been used by housewives for washing dishes.

It is best not to use abrasives or hard metal scouring pads to clean the baking sheet cover.

The procedure is as follows:

pour water into a baking sheet, add 2 tbsp. l. vinegar, baking soda, and liquid dishwashing detergent
all added ingredients must dissolve;
remove the baking sheet in an oven preheated to 100 ° C for half an hour (periodically checking that the water does not evaporate);
after the required time has elapsed, remove the sheet from the oven and wash it.

You need to try several methods to choose the one that is comfortable.Do not neglect the advice of your elders.

Peroxide and soda solution

Another option is how to easily and quickly get rid of carbon deposits, and you can use the means to clean pots, kettles, pans, etc. You need:

take 100-150 g of soda, pour hydrogen peroxide into it (the composition should be thick);
apply the mixture to the surface of the sheet;
after 30 minutes, rinse under water.

The finished product and folk recipes must be chosen according to the type of material.

According to many housewives, hydrogen peroxide does a great job of removing soot from baked goods.

Clean with baking soda and dish soap

There is one option for cooking utensils, which has been used for more than a decade, but it is not always possible to apply it in modern kitchens. First of all, you need to find a large saucepan that will fit the baking sheet.

Some metals change color under the influence of aggressive components; they cannot be cleaned with ready-made products based on acids and alkalis.

Further actions are as follows:

lower the sheet into a large container so that the poured water completely covers it;
add 2 tbsp. l. soda (you need not baking soda, but soda ash) and 2-3 tbsp. l. a liquid detergent commonly used for washing dishes;
put the container on medium heat and wait until the water boils the water (boil for at least half an hour);
take out the sheet and rinse with warm water.

Skill is acquired by trial and error.

We use soda

If soda is available, you can pour it over the sheet and leave it for a couple of hours. Fat and carbon deposits are removed thanks to the phosphoric acid in the drink. If there is no time to wait so long, the liquid in the baking sheet is brought to a boil (5-10 minutes), after which the residual contamination can be easily washed off with water.

You can use Coca Cola to clean the aluminum baking sheet.

Cleanse with ammonia

Even with the most severe contamination, ammonia can easily cope. The only negative is the unpleasant smell. Apply the product to a sponge and process the entire sheet. Then we put it in the oven for the night, in the morning just rinse the sheet with running water. This tool will help solve the problem for housewives who were looking for ways to clean the aluminum baking sheet.

It is better to wash off the carbon deposits from the dishes with hot water. After that, the dishes are wiped dry.

Special cleaning agents

In stores today there is a large selection of special chemicals that will help get rid of grease and carbon deposits. However, products are in special demand:

"Shine" - the product is produced in Russia, has a gel-like consistency. It is enough to apply it for 20 minutes and the problem is solved.
"ТМ Amway" - liquid can quickly wash any surface.
CleanUp is ideal for metal surfaces. The product is sprayed over the entire surface and then washed off with running water.

How to clean stubborn dirt on a silicone mold

It so happens that during the cooking process, a lot of dirt forms on the dishes. For example, the filling has partially leaked out of the pie or the fat has burnt. In these cases, you can use the following methods.

Washing powder and vegetable oil

In a large container, prepare a cleaning solution with the following ingredients:

water (3 liters);
washing powder (1/2 cup);
vegetable oil (1/2 cup).

Bring the product to a boil and place the washable silicone container there for 15 minutes. Then remove the dishes from the solution, wait until they cool and wash in warm water.

Lemon acid

"Lemon" is considered one of the most effective remedies for fresh stains on dishes. To clean up stubborn dirt, you need:

Pour hot water (3-4 liters) into a deep basin.
Dissolve 1 tablespoon of citric acid in liquid.
Immerse the soiled container in the solution so that the water completely covers all impurities.
After 20-30 minutes, remove the mold and wash with a foam sponge and dish gel.

Method 5. Vinegar

Vinegar is acidic, and therefore can also be successfully used to eliminate the effects of delicious baked goods. This method works well for cleaning glass baking dishes.

Pour vinegar and water into a baking sheet. Put it in the oven and heat it to 100 degrees. The water should not completely boil away, so 3-5 minutes will be enough to soften the fat.

The proportion of vinegar and water depends on the concentration of the product you are using. Naturally, you will need more ordinary table vinegar than essences.

When the vinegar begins to evaporate, prepare yourself for a not-so-pleasant odor. Therefore, take care of airing the room in advance: open the windows or turn on the hood.

Another useful article: How to wash frosted glass on doors

Features of the operation of silicone molds

Soft and elastic items for making baked goods can be easily removed from the finished product, the dough does not stick to them, dirt easily comes off under the influence of warm water. But these characteristics will remain relevant only as long as household appliances are properly cared for.

So that one day you do not have to wipe off the traces of burnt oil from the surface, which has become porous and uncompromising, the following rules must always be observed:

Before using the product, wash it in warm water with the addition of detergent and dry it. After this, we wipe the molds dry and grease them with a thin layer of vegetable oil. With further use, it is no longer necessary to lubricate the inside of the products! If you ignore this rule, then the material will gradually become covered with a bloom from the burnt oil.
Do not use corrosive detergents. They can lead to melting of raw materials and damage to products. With subsequent use, such forms will spoil the taste of the baked goods and its appearance.
Silicone actively attracts static electricity, so it quickly becomes covered with dust, even when stored in covers. Before each use of the molds, they must be rinsed with warm water and dried.
To thoroughly clean the product, it is necessary to process it from the outside, turn it out and process it again. This is the only way to clean out the remains of products from all nooks and crannies.
You can wash the silicone only after it has completely cooled down. It is highly undesirable to delay cleaning. The longer traces of berries, fruits, sugar and oil remain on the product, the higher the likelihood that they will fix there very reliably and create problems with cleaning.

If you follow these rules, then silicone molds do not have to be regularly cleaned from grease, plaque or specific brown spots. At the same time, the products will not give off specific rubbery notes or burnt oil.