How to clean the kettle from grease outside at home: 20 cleaning products

Types of pans and methods for cleaning carbon deposits

The farm uses cast iron, teflon, ceramic and aluminum dishes. Depending on the material, a simple or combined detergent is suitable for cleaning. If an inappropriate solution is used, the surface can be severely damaged.

Teflon

Such pans should not be rubbed with hard metal brushes. And use knives, forks, spoons and other sharp objects. If they scratch the surface, the food will burn. And cooking in such dishes is already unhealthy. Consider cleaning options when the grease is thin.

Ethyl alcohol copes with this situation. They rub the bottom of the pan with it and wait for the layer to dissolve, rinse thoroughly.
The toothpaste will also wash away not very old plaque. It is applied to the surface and left until the carbon is softened. Then washed off with a sponge.
Borax is added as a detergent to ammonia. Dissolve one teaspoon in 200 grams of water and rub the inner bottom of the dish. The fat is corroded, and all that remains is to wash the pan from the chemicals.
Coca-Cola is used as an alternative. Pour to the brim and bring to a boil. Wait until it cools completely, pour out and clean with dish detergent.

To prevent the appearance of carbon deposits in a non-stick frying pan, it should not be heated above 250 degrees. And it is advisable to wash immediately after use.

Cast iron

Cleaning with citric acid is often used for environmental friendliness and performance. The powder is diluted in the proportion - one teaspoon per liter of water. The solution is poured into a bowl and boiled until the carbon is dissolved. Alternatively, the fat layer will scrape off the table salt if left to act for two to three days. At this time, an even layer is poured onto the burnt surface and covered with a wet cloth. Then the plaque is washed off with a sponge. If there is no time to wait, salt is poured with vinegar. Boil for five minutes and add half a glass of baking soda. Cook until the solution evaporates. Then the separated carbon is washed off with a sponge. But for the outer part of the dishes, the method will not work. Some people ignite the pan in an oven or over a fire for two to three hours.

Safety is important here

In the prevention of the formation of carbon deposits in such dishes, simple care rules help.

Before using a new frying pan for the first time, pour sunflower oil into it and ignite it. Then washed off with plain water without funds. And only after that food is prepared.
Wash immediately after use while still hot. Do not let cool.
Do not use metal brushes for cleaning. After rinsing, wipe with a disposable cloth.
Do not wash cast iron in the dishwasher, only by hand.

Ceramic

Fat from such a frying pan is sometimes washed off by boiling in a saucepan with detergent.
Light dirt can be wiped off with a cotton pad moistened with alcohol.
Washing in a typewriter on a gentle mode two or three times helps.

Aluminum

It is more difficult to clean an aluminum pan to its original appearance than a cast iron one. It cannot be washed with strong chemicals and powders, only with home remedies.

Pour ten liters of water into a large saucepan or basin. Dissolve 100 grams of office glue, one piece of laundry soap grated on a coarse grater and 500 grams of soda ash. Stir and lower the pan. Boil for half an hour and leave in solution until morning. Then washed and wiped dry.

Sand, salt and a metal brush save from carbon deposits on the outer surface. If scratches appear, polish with soda.

Homemade Recipes for Cleaning the Teapot Surface

How to clean a stainless steel kettle outside? The appearance of scale on the outside of the kettle and the rest of the kitchen utensils is an inevitable and unpleasant process. But what to do if ugly and hard stripes have formed on the surface of the device? Today there are a large number of recipes to help get rid of unpleasant limescale. They are caused by the washing of the stainless metal with the help of various products and chemical components that are used to pour over the kettle abundantly.

It is important to note that these methods are not suitable for cleaning an electrical appliance!

So, how to remove scale in a stainless steel kettle - various options for cleaning the metal.

The use of citric acid

To clean the kettle with citric acid, you can use a cotton pad or swab:

moisten it in a citric acid solution (a liter of water for a bag of lemon);
then we apply it to the scale;
waiting for the unpleasant plaque to completely dissolve.

You can also use an absorbent cloth to wrap the kettle in for quick cleaning of plaque.

If there is no time to clean, you can dip the kitchen appliance in a solution of citric acid, however, in this case, you should not keep the kettle in lemon liquid for a long time, as this can damage the inner layer (usually it becomes rough and begins to separate slightly during boiling water ). If the plaque does not disappear from the surface, it is allowed to repeat the manipulation - only in this case it is recommended to increase the amount of acid taken. If desired, the lemon is replaced with the juice of one lemon.

After cleaning, rinse the kitchen appliance thoroughly using detergent. To evaluate the result of the work, after washing the stainless surface will need to be wiped with a towel.

Typically, citric acid cleans up newly formed plaque. Therefore, if the metal has not been washed from scale for a long time, it should be treated with stronger cleaning compounds.

Using baking soda while cleaning

This method is considered the simplest and most accessible to everyone. To implement it, first you need to heat the kettle, and then put it on the sink. Now you need to get out the soda, sprinkle it on a damp sponge or rag, and then gently wipe the surface. If the plaque does not come off, you need to take more soda, and turn the sponge on the hard side, which can clean difficult dirt. After cleaning, the kettle is rinsed with soapy water and then dried to evaluate the result

There are some precautions:

It is important to note: it is required to heat the kettle in order for the plaque to come off the walls of the kitchen appliance faster. However, in this case, you need to be careful so as not to burn yourself during cleansing.
It is also worth noting that soda is considered an abrasive agent, so it should not rub the metal too much so as not to scratch the surface .. Usually, soda cleans stainless metal well, since alkali easily corrodes scale and greasy traces

Usually, soda cleans stainless steel well, since alkali easily corrodes scale and greasy traces.

The second way to use baking soda

This method is considered more effective, since when it is performed, the kettle will be boiled in a soda solution, which will provide a more gentle and high-quality cleansing. Therefore, this method of cleaning is best used if the metal is heavily contaminated. We take a large container so that the kettle can fully fit in it. After that, we put in it as many spoons of soda as the liters are needed to completely immerse the device. Then we put the container on gas, lower the kettle into it and boil over medium heat for 30 minutes.

It is important to note that when performing this option, the plaque will not leave the walls on its own, so it will need to be removed with a brush or coarse cloth after the water has cooled.Then the kettle is wiped dry to assess the cleaning quality.

If the kitchen appliance is too dirty, you can add 1-2 tablespoons of detergent to the water.

These cleaning agents can be used once a week!

How to descale?

If hard water flows in the house, then scale will certainly form on the walls of the container for boiling water. To reduce its amount, you need to use filters or order purified water. You can clean the kettle using the following methods:

Vinegar. Vinegar is poured into a contaminated container. Water is added in the same amount. The water is brought to a boil, after which the hotplate turns off

If the hostess decides to boil the kettle for a little longer, it is important to open the windows and get out of the kitchen, since vinegar fumes are quite harmful. After a few hours, the limescale can be gently cleaned off with a brush or hard sponge.
Citric acid is completely harmless, so many people prefer to use it

It is necessary to pour water into the kettle to the top, pour a couple of packages of acid there. Turn on the fire and simmer until the plaque begins to recede. Turn off the hotplate and leave to cool completely. The limescale can then be easily removed.

Cleaning a stainless steel item at home is pretty easy. After cleaning is finished, you need to polish the item with a soft cloth for a shine.

Cleaning the electric kettle

It is recommended to clean the inside of the electric kettle from rust with food acids - citric or acetic. They are safe for your health, so you don't have to worry about the leftovers going into the water for drinks. In addition, food acids will gently remove rusty deposits without damaging the material. A special agent will help against stubborn dirt.

Lemon acid

It is very easy to clean:

Pour water into the kettle up to the maximum level.
Pour out a bag (10-15 g) of citric acid.
Turn on and boil.
Wait a while and boil again.
Leave the device on for 10-15 minutes.
Pour lemon water and wipe inside with a sponge.
Rinse under the tap, collect clean water.
Boil and drain the boiling water.

It is important to be careful: after boiling, the metal parts will be hot. It is recommended to wait until the inner walls and heating elements cool down. Only then can you wipe with a sponge

Wear rubber gloves for protection. The sponge will quickly turn orange, so it needs to be rinsed or changed frequently.

Only then can you wipe with a sponge. Wear rubber gloves for protection. The sponge will quickly turn orange and will need to be rinsed or changed frequently.

Instead of powder, you can wash the kettle with fresh lemon. The acid in it is not so concentrated, so the juice is suitable for light rust. The principle of cleaning is the same: a sliced lemon (1–4 wedges) is placed in water and boiled several times. Previously, you can rub the parts of the kettle with lemon, stand for two minutes, and only then pour water and boil with the same slices.

Vinegar and soda

Plastic can be cleaned with carbon dioxide. It is formed by a reaction between vinegar and baking soda. How to do:

Pour three-quarters of water into an electric kettle.
Top up with vinegar solution up to the maximum mark.
Add a tablespoon of baking soda.
Wait until the end of the reaction and boil the liquid.
Leave to cool.
Drain and rinse under the tap.

If the rust is brown, you can try scrubbing the surface with vinegar and water. The method is suitable for metal, glass and plastic teapots. How to use:

Pour 2 cups of water inside.
Boil and pour in half a glass of 9% vinegar solution.
Leave it on for an hour.
Drain and boil clean water several times.

You should periodically check the progress of the cleaning process. If the rust and scale are swollen but not loose, they can be treated with a sponge or old toothbrush.

Bagi Kumkumit

If it is not possible to wash the rust with folk remedies, it is recommended to use the Bagi Kumkumit cleaning liquid. In addition to rust, it removes old limescale deposits. Suitable for metal and plastic electric kettles. The composition includes citric acid. Available in 350 ml bottles. It costs 150-250 rubles.

How to clean rust from a kettle:

Spread 50-100 ml of liquid evenly over the surface.
Soak 3-5 minutes.
Pour 500 ml of water inside and boil.
Rinse thoroughly under the tap, add clean water and boil again.

There is another way to use it. It is necessary to pour 3/4 of water into the kettle and boil. Then pour in 100 ml of cleaning liquid and leave for 15–20 minutes. Then rinse under running water.

Ways to remove burnt sugar from a saucepan

There are many ways to clean up burnt sugar, even if several days have passed since it was soiled. You can pick up household chemicals or folk remedies, taking into account the coating of the pan.

Cleaning with household chemicals

Household products contain surfactants - substances that reduce the adhesion of burnt sugar to the surface of kitchen utensils. The easiest way is laundry soap.

Some surfactant products, including soap, contain abrasive particles, so you need to choose wisely.
Laundry soap will help cleanse the pot of sugar deposits.

Cleaning with laundry soap is easy enough:

Soften some of the soap in warm water;
Add the soaked mass to the pan, applying to the places of the formed carbon;
Wait until the soapy mass hardens;
Pour hot water over a saucepan and boil this mixture for 60 minutes;
Cool and drain off the water, cleaning the residues with a soft sponge.

Soap will loosen the carbon deposits while leaving the pan surface intact.

One of the most effective methods for cleaning kitchen utensils is baking soda.

Acid cleaning

The acid is a great help for the burning off of the sugar parts from the sides and bottom of the pot.

Fill the pan with water, add two tablespoons of citric acid inside (or more if the internal volume of the dishes is large). Leave for at least 5 hours to allow the acid to dissolve the sugar particles.

In addition to citric acid, you can use natural lemon juice or 9% table vinegar.

The method is suitable for any type of surface, since it cleans much softer than any other means, and the acidity is not enough to corrode the coating.

Salt should not be used for stainless dishes,

Salt cleaning

Regular salt is also great. Pour cold water into the pan, leave for 60 minutes - during this time, the sugar coke will have time to soak. Then drain the water, and cover the burnt places with salt. Leave for 2-3 hours, then walk with a regular soft sponge and rinse with warm water.

Do not use salt to clean stainless dishes, as dark spots will appear.

Soda cleaning

You can clean the pot with a baking soda paste. Soak the required amount of baking soda with soapy water, then apply to the burnt parts of the dishes. Then rinse with warm water. Another way is to boil in a saucepan in a water-salt solution for 10 minutes.

Activated carbon is a safe way to clean kitchen utensils.

Activated carbon cleaning

Activated carbon is a fairly safe method, suitable for dishes made of any materials. The tablets must be crushed to a powder, then diluted with clean warm water. Apply the creamy mass to the burnt sugar caramel. After 20 minutes, the dirt will be easily washed off.

Cleaning with baking soda, laundry soap and silicate glue

Laundry soap should be grated, silicate glue (no more than 100 grams) added to the mixture and filled with three liters of water.

The mixture is poured into a burnt pan, after which it must be boiled over low heat for 30 minutes.The caramel will soften and the residue can be washed off with a simple sponge.

Do not clean the Teflon coating in this way.
Toothpowder can also be used to clean kitchen utensils.

Cleaning with tooth powder

Tooth powder will cope even with sugar deposits. First you need to prepare the mixture: dilute the powder to a gruel, apply it to the burnt areas and leave for 12 hours. Then wash off with soapy water and rinse with clean water.

Cleaning with dry mustard and coffee

Mustard powder and coffee similarly need to be softened to a mushy state with plain water. After applying on burnt places, leave for several hours. Wash off softened dirt with water. Or use coffee grounds for the same purpose.

Using coffee grounds to clean pots.

Home quick methods to remove stains and other stains

It is not necessary to use harsh chemicals to digest old stains and even rust. There are more conservative methods that will be safer. Their main advantage is their availability and the ability to apply independently at home. Let's take a closer look at some of the ways to cleanse fat.

Baking soda

Pot soot is perfectly washed off after using baking soda. The tool is prepared according to a simple principle:

Buy a package of medium sized soda, it is advisable to check the composition for the absence of impurities.
One third of the package should be placed in five liters of water.
Boil spoiled dishes in the prepared mixture. In this case, the time can be different and depend on the level of pollution. For lightly soiled dishes from 10 to 30 minutes, and stubborn and old grease stains - up to two hours.

PVA glue and some alkaline soap

There is glue in every apartment and you can find it not only for office supplies. The method of using such a component in a cleaning agent is used for all types of dishes, regardless of the surface characteristics. Such ingredients are able to cope with both light dirt and old stains.

The use of glue and soap does not differ in complex machinations and looks like this:

We prepare the ingredients for the solution.
We mix one and a half bar of grated soap (preferably ordinary household soap, which is sold in all supermarkets at a low price and even in pharmacies) with two tablespoons of PVA glue.
We add five liters of water to the components. For greater effect, use filtered.
Simmer over medium heat for 20 minutes to an hour and a half. This should be sufficient to remove moderately soiled stains.
After the boiled mixture has cooled, wipe the dishes with a clean sponge and rinse thoroughly under running water.

Baking soda combined with silicate glue

Another effective "pair", which is not inferior in efficiency to the previous methods. The frequency of using this method is due to the fact that it cleans the inner and outer parts of the dishes as much as possible. The cleaning process is as follows:

Fill a large container with water. These can be basins or buckets. The main thing is not soaking in plastic products.
Pour one and a half packs of soda into water and add a medium tube of silicate glue. With the last component, the main thing is not to overdo it, so as not to achieve the opposite effect from such a kitchen procedure.
Boil the solution and add all the spoiled dishes. You need to immerse plates, pans and other kitchen utensils completely, without open areas.
The "bath" lasts for twenty minutes. Next, drain the solution and rinse the dishes under running water.
If necessary, you can rinse with detergent or continue soaking with renewed doses of baking soda and silicate glue.

Sour apples and rhubarb

The hostesses know how to make apple pie and rhubarb pies. But they rarely think about using this "couple" for other purposes.Preparing them properly can be a great way to get rid of the everlasting grease problem.

The acid of these products is useful for the body, but harmful for scale. Therefore, exposure to high temperatures can affect fats and dissolve them. It is enough to grate two components on a grater, pour water in a spoiled vessel and boil. The duration of the procedure varies from five to ten minutes, depending on the amount of contamination.

If you need to wash the outside, then you can proceed as follows:

Grate apple and rhubarb. Moisten with water and let sit for a couple of minutes.
Strain the contents, leaving only water.
These acids can be moistened with sponges or added to any chemical agent.
It should be used regularly for complete fat removal.

Cleaning without chemicals

Grease splashes can be easily removed with regular baking soda. It is enough to sprinkle it on a damp kitchen sponge and rub the surface outside

This must be done carefully, it is not necessary to make special efforts.

Take special care when cleaning the nickel plating, as strong friction may cause scratches.

You can replace the baking soda with a milder product such as toothpaste. In special cases, old dirt can be cleaned with a solution made from equal parts baking soda, salt and vinegar. Mix them one teaspoon at a time, rub over dried dirt and rinse thoroughly.

If the kettle is made of aluminum

Such dishes are easy to clean with activated charcoal purchased from a pharmacy.

crush 10-15 tablets of activated carbon into powder;
moisten the walls of the dishes and apply the powder evenly;
soak for an hour, wipe and rinse with water.

We clean the stainless steel kettle

All the slightest dirt is visible on stainless steel kettles. You can clean them using the simple tools and methods available.

Method 1. Allows you to remove stains and grease with baking soda:

the dishes are heated;
put on the table;
soda is applied to a damp sponge;
wipe off the dirt with care;
washed first with warm, then cold water.

Preheating allows you to quickly remove dirt from the surface of the crockery.

Method 2. Boiling in a solution of soda:

warm water is collected in a bucket or basin, soda is dissolved in it per liter of water 1 tablespoon;
the container is put to heat, a kettle or other utensils are lowered into it;
after 30 minutes of boiling, turn off and leave to cool completely;
the remains of contamination are removed with a sponge;
the dishes are thoroughly washed in running water and wiped dry.

Method 3. Boiling in a solution of soda and vinegar allows you to remove fat, spending less time:

a solution is prepared in a prepared container by adding three tablespoons of baking soda and table vinegar to the heated water;
a kettle is lowered into the solution and heated to a boil;
boil for no more than 4-5 minutes, then leave to cool;
washed with water and dried with a towel.

It is important that the dishes are completely covered with the solution. Method 4

Processing with toothpaste allows you to quickly and effortlessly clean the kettle from any dirt:

Method 4. Processing with toothpaste allows you to quickly and effortlessly wash the kettle from any dirt:

just squeeze the paste out of the tube onto the hard side of the sponge or onto an unnecessary brush;
rub gently on the outside, then rinse first in warm, then in cold water;
Finish cleaning by buffing the surface to a high shine with a flannel cloth or tissue.

How to clean a stainless steel kettle from carbon deposits

If it is relatively easy to clean a stainless steel kettle from the outside of grease, then it is much more difficult to wash off the burn. The most effective method is boiling with the addition of various cleaning and acidic agents.

Activated carbon

You will need one pack (10 activated charcoal tablets).

Use a spoon or rolling pin to crush them into powder. Lightly dampen the kettle with hot water or boil over. Apply the resulting black powder, leave for 40-60 minutes. After the specified period of time, clean with a damp sponge and rinse with water.

Boiling in soda solution

To clean a heavily soiled stainless steel kettle, it is often not enough to simply polish it with a sponge. Quickly and effortlessly cleaning the surface from carbon deposits allows soaking in a composition of several components.

How to cook:

Find a roomy iron pot where you can put the kettle.
Prepare soda ash (not baking soda, but for washing and washing - usually the information is on the package), laundry soap and one sour apple.
Pour water into a saucepan and add soda at the rate of 2 teaspoons per 1 liter of water, bring to a boil.
Grate laundry soap on a fine grater (100 grams per 5 liters), on a coarse grater - 1 apple.
Place the ingredients in a saucepan, mix everything.
Place a kettle in the boiled solution, reduce the power of the burner and boil for 30 minutes to 1.5 hours. From time to time, you can try to clean a dirty surface with a wooden spatula to see if carbon deposits are coming off well.
When the layer of fat and burn is softened, remove the kettle, clean with a sponge, rinse with water and wipe.

Ammonia

When using this product, it is advisable to wear a respirator or not bring the container close to the nose. You can clean with ammonia not only stainless surfaces, but also the body of the electric kettle in order to add shine and remove dirt.

Remove a thick layer of carbon deposits as follows:

grease a dry stainless steel kettle liberally with ammonia (usually 50-100 ml is required);
put the product in a plastic bag, put on 1 or 2 more bags on top, tie tightly to avoid volatilization of ammonia;
leave for 10-12 hours;
take it out of the bag, wash the kettle with a sponge, or forcefully clean and dry.

The main disadvantage of this method is a strong odor, but the carbon deposits perfectly come off on its own, practically no effort is required.

Chlorine Free Bleach

This method is based on the use of industrial cleaning agents. In the store you need to buy any powder bleach without chlorine, for example "Bos Plus", its price is about 100 rubles.

Prepare a working solution:

place a kettle in a large saucepan;
before boiling, add 5 grams of bleach to the water at the rate of 5 liters;
boil the solution for 30-60 minutes;
take out the kettle, put it in a bowl of warm water and clean the remaining carbon deposits, rub hard-to-reach places with a toothbrush.

How to clean a stainless steel kettle inside from scale

To clean an ordinary or electric kettle, use "Anti-scale" or "Salit". But it is better to use food acids.

How to clean a metal kettle with a lemon:

For 3 liters of water, add a 25 gram sachet of citric acid;
Boil the solution for 15 minutes;
After that, fill the container with plain water, boil again.

A 25 gram bag of citric acid is added to 3 liters of water.

Inside an ordinary kettle, potato or fruit peel containing organic acids is boiled. A brine or marinade from home or ready-made preserves works effectively. It contains vinegar that breaks down limescale.

A brine or marinade from home or ready-made canning works effectively. Scale is actively formed from tap water. If you pour in filtered, you will have to clean the dishes less often. You can use bottled water.
If you fill in filtered water, you will need to clean the dishes less often.