8 ways with natural remedies
 |
Method 1: lemon Process:
If the kettle smells like plastic after the first treatment, repeat the procedure. Citric acid can be used instead of lemon (50 grams per kettle) |
 |
Method 2: bay leaf Process:
Laurel leaves help to quickly get rid of the plastic smell, but they can leave their own scent in the kettle. This way it is good to remove the smell in a stainless steel kettle. |
 |
Method 3: baking soda
Process:
|
 |
Method 4: vinegar Process:
Instead of vinegar, you can use 70% vinegar essence at the rate of 1 tablespoon per 1 liter of water |
 |
Method 5: carbonated drinks
Process:
Coca-Cola and Sprite contain phosphoric acid, which dissolves oils and technical fluids. Their residues are present on the surfaces of the new electric kettle and give off an unpleasant odor. |
 |
Method 6: sugar
Process:
Lemon juice can be added in any amount |
 |
Method 7: Sauerkraut
Process:
The more sour the cabbage, the more effectively it removes odor. |
 |
Method 8: activated carbon
Process:
Both black and white activated carbon can be used |
The main remedies
To eliminate the unpleasant odors characteristic of new electric kettles, they mainly use folk methods and improvised means.
Lemon acid
This method helps to remove unpleasant odors in one application. To do this, just fill the appliance and add 2 sachets of citric acid. Then you need to stand for 12 hours and re-boil the solution.
Baking soda
This tool is used to clean and refresh plastic. To remove an unpleasant odor, fill the device with water and add 4 tablespoons of baking soda.Then you need to stir and boil the solution. After that, you need to leave the mixture for 2 hours. At the end, the solution is boiled again and the kettle is rinsed.
Lemon juice
If the new electric kettle smells unpleasant, then you will need:
- Squeeze the juice from three lemons into a separate container.
- Finely chop the citrus peel.
- Fold the rind and pour the juice into the kettle.
- Fill with water, boil the solution and stand for no more than 14 hours.
If necessary, the described steps can be repeated.
Sauerkraut
Such cabbage contains acids that can remove unpleasant odors and remove some deposits on the surface of the kettle. This requires:
- Fill the device 1/3 with cabbage together with brine and 2/3 with water.
- Boil the solution and stand for three hours.
- Flush the device with water.
To remove the unpleasant odor, it is recommended to use the sour cabbage as much as possible. Thanks to this, problems can be solved the first time.
Bay leaf
Bay leaf helps to immediately get rid of the unpleasant odor without using specialized means. To get this result, you need:
- Fill the kettle with water completely.
- Add 7 bay leaves.
- Boil water and stand for three hours.
At the end of the specified period, you need to boil the composition again and rinse the electric kettle. Since bay leaves often leave behind a characteristic odor, after the described procedure, it is necessary to leave the device with an open tank for airing overnight.
Citrus peel
The peel of citrus fruits (lemon, orange and others) also effectively removes unpleasant odors from new electrical appliances. In this case, you will need:
- Peel the zest from 5-6 fruits.
- Cut the zest into small slices and place inside the container.
- Fill the kettle with water and boil.
- Withstand the composition for a day and boil again.
After the procedure, you need to rinse the device. If the water tastes like citrus after boiling, the kettle must be ventilated for several hours.
Vinegar
Vinegar is used when you need to quickly freshen the kettle. To do this, you need to fill the device with 250 milliliters of water. Next, add 125 milliliters of 9 percent acetic acid (you can take 70 percent vinegar essence and mix with water in a ratio of 1 tablespoon to 1 liter).
Detergents with surfactants
For cleaning electric kettles, detergents with surfactants (surfactants) are also used, which do not damage the device and remove unpleasant odors.
Reasons for the appearance of an unpleasant odor
If an unused, completely new device just brought from the store smells unpleasant, there may be several reasons for the phenomenon:
- The smell has not disappeared. The teapot in the display case as a sample has no aroma, and the item taken out of the package smells unpleasant? This is not a sign of a fake, but a feature of food grade plastic. If the purchased device is left in a well-ventilated room for several hours, the aroma will weaken and go away. As a last resort, you can resort to simple manipulations in order to finally remove all traces of the phenomenon.
- Was used not food, but industrial plastic. The second option of raw materials is much cheaper than manufacturers often abuse. Even if a strong, repulsive smell emanates from the kettle in the window, it is better to refuse to buy. By the way, this problem is often faced by people who buy plastic dishes in online stores.
If the old appliance smells unpleasant, this indicates that its service life has come to an end. It is already useless to do anything here, you just need to purchase a new device.
Methods for removing persistent odors
Then you should turn to several proven ways to remove the smell of plastic from an electric kettle:
- 1 Citric acid.Fill the device to the “maximum” mark, pour 2 bags of citric acid there, boil and leave for 12 hours. Then again boil the water that has settled with citric acid, drain everything and rinse under the tap.
- 2 Lemon juice. If you don't have citric acid at hand, go to the store far or have no time, then you can use natural lemon instead. But you need 3 or 4 pieces. It is necessary to fill the product with fresh water to the maximum, squeeze juice from 3-4 lemons there and boil. Leave for 12 hours, then boil again and drain. The actions are similar with the use of citric acid.
- 3Vinegar. You need to take half a glass of 9% vinegar, 2 tbsp. l. vinegar essence 70%, add everything to the device with the maximum amount of water. Then turn on the kettle, but do not bring to a boil, do not wait for the button to pop up automatically. As soon as the kettle made a noise and began to boil, turn it off. And so repeat at least 3 times. After that, you need to thoroughly rinse the kettle under the tap.
- 4 Lemon peel. You need to take a fresh lemon peel, it is desirable that it fill the capacity of the device to half (if less, less is possible, but not much), pour water to the maximum, boil. Leave for 12 hours, then boil again and clean and rinse the kettle.
- 5 "Sprite". Fill the kettle with Sprite to maximum. Boil at least 3 times. Rinse the kettle thoroughly.
- 6Soda. In a kettle filled to the maximum with fresh water, add 3 tbsp. l. soda. Boil, let cool or wait half an hour, then boil again and rinse under water.
- 7 Bay leaf. In this case, pour a bag of bay leaves into the teapot, add water to the “maximum” mark, and bring to a boil. Then leave everything for an hour, let it cool, boil again and drain the water, thoroughly rinsing the kettle.
One of these methods should definitely help. If one does not help, you need to try the second. But if all the methods have been tried, and the suspicious smell does not want to disappear in any way, then the best solution would be to return the kettle back to the store and demand its replacement.
When buying a kettle, always study the entire assortment, it is undesirable to take a model of an unknown manufacturer and company. Ask the seller for a certificate of conformity. Carefully inspect the goods from all sides for defects. The pungent odor should also be noticeable. But often all new products can exude such aromas. Usually, after a few days and boiling, there is no trace of the smell of plastic.
How to get rid of the plastic smell in a new electric kettle
The aroma of freshly baked pastry soars around the house, on the served table there is a vase with your favorite sweets and a bowl of homemade jam.
The whole family was waiting for Sunday tea, but suddenly, out of nowhere, came the smell of plastic. As it turned out, the culprit is the electric kettle. But we bought it just a couple of hours ago.
Is the celebration ruined? Or is there a way to get rid of the plastic smell in the kettle?
Why does the new kettle smell like plastic?
The reason lies in the addition of plasticizers - complex chemical compounds - to the body of the product, as well as in the use of low-quality dye. The goal is to reduce the cost and make the product more attractive among competitors.
In fact, plasticizers are an integral part of successful construction, since they are designed to endow materials with irreplaceable properties - plasticity and elasticity. They are actively used in combination with cement, gypsum, when creating stucco moldings. Even nail polish contains valuable material.
But how expedient it is to use plasticizers when creating an electric kettle, because it can be dangerous to our health. Maybe it's better to refuse a dubious purchase?
Is the smell of plastic a defect or a norm?
In fact, any electric kettle exudes an unpleasant odor at first. The question is, how strong is it?
A high-quality teapot can get rid of the plastic "aroma" by boiling water in it several times in a row, draining the old one and pouring in the fresh one. This information should be indicated in the instructions for use.
But sometimes such measures are not enough, because the smell is so strong that it seems that it is simply impossible to overcome it. In fact, you can, and some craftsmen have found a way out, try it too.
6 handy remedies for the smell of plastic
To eliminate the plastic "odor", it is not at all necessary to look for an effective chemical agent in the household department of the store. First, try out traditional methods that are just as effective.
Lemon acid:
- we take 20 g of acid;
- we collect a full kettle of water;
- add acid;
- bring to a boil;
- leave for 12 hours;
- bring to a boil again;
- let stand for another hour;
- drain the water;
- rinse the kettle.
Vinegar and essence:
- mix 100 g of 9% vinegar;
- pour into a kettle;
- pour water;
- heat without boiling;
- we defend for half an hour;
- reheat;
- we defend for another hour;
- drain the solution;
- rinse the kettle.
Coca Cola:
- we take a cola with a volume of 1-1.5 liters;
- pour the contents of the bottle into an electric kettle;
- bring to a boil;
- merge;
- we collect clean water;
- bring to a boil and drain;
- wash the kettle with detergent;
- rinse.
Instead of cola, you can use a sprite, it is also effective and the principle of action does not differ from the above.
Bay leaf:
- take half a packet of bay leaves;
- put in a kettle; fill with water;
- bring to a boil;
- we insist 3 hours;
- bring to a boil again;
- let stand for another half an hour;
- merge;
- washing the kettle with detergent;
- rinse.
Baking soda:
- take 3 tbsp. soda;
- pour into containers;
- diluted with water;
- mix;
- pour into the kettle;
- add water;
- bring to a boil;
- let stand for 2 hours;
- bring to a boil again;
- drain the water;
- my kettle.
Lemon zest:
- take 3 whole lemons;
- we cleanse of the zest;
- we put it in the kettle;
- fill with water;
- bring to a boil;
- we insist 12 hours;
- bring to a boil again;
- we drain the water and take out the zest;
- rinse the kettle.
Chemistry against the "plastic" smell
If none of the available methods have coped with eliminating the odor, use a household product.
But only in the most extreme case, since their active substances accumulate in the body and adversely affect health.
Add one of them to the kettle, fill with water and turn on the appliance.
After boiling, drain the water, pour clean and boil again. Drain the water again and wash the kettle thoroughly, rinse under running water.
How to remove odor from a new electric kettle
Almost all new kettles give off plastic, and you need to get rid of this smell right away. There are many effective methods on how to remove the plastic smell in a new electric kettle.
For such purposes, it is not recommended to use household chemicals. Harmful components in their composition can remain on the walls of the device and be absorbed into its body. This means that the liquid poured for boiling will constantly absorb harmful structures. This will lead to unpredictable consequences. Allergies, bowel disorders, skin rashes are possible. Therefore, use only proven methods, from which you can not expect a dirty trick.
Proven methods
These methods include folk remedies. They will rid the kettle of the plastic smell, and at the same time keep the health of those around. Housewives can offer many proven and effective methods, because the problem of odors has been around for a long time. Folk methods are being improved, new means are being selected, the properties of which many do not even think about, the ratios of ingredients are being revised, new compositions are being tried. Thanks to the hard work of the hostesses, you can choose those drugs that are always at hand and can bring results.
Boiling water several times
The method is used for a new electric kettle:
- wash the inside of the appliance body with any dishwashing detergent. It's a good idea to use a dish detergent for baby accessories. They are free from dyes and pungent aroma;
- fill the vessel with water and boil it;
- drain the contents and refill with fresh water;
- boil again.
Repeat boiling and changing the liquid at least two times. The smell of plastic will disappear. Only after this simple procedure, boil water in the kettle for use.
Lemon acid
- pour a full kettle of water;
- add 4-5 packets of citric acid;
- turn on the electric kettle; boil the contents;
- leave full for 12 hours;
- after a while, bring the poured composition to a boil again;
- drain the lemon mixture and rinse the kettle.
Lemon
Instead of packages of citric acid, you can add the juice of 4 freshly squeezed lemons to the water. The rest of the steps are performed in the same way as in the previous case.
Lemon zest
Follow these steps:
- Take a few lemons and peel each skin.
- Fill the second part of the appliance with zest.
- Add water to the top. Boil the mixture.
- Turn off the device, and insist the composition for 12 hours.
- Then boil the mixture again.
- Drain the remaining liquid, remove the skins and wash the appliance thoroughly.
Soda
Powder is irreplaceable in everyday life. They can carry out any cleaning work. Soda is also used to remove odors from the kettle. The procedure is simple, but effective:
- Fill the device with water.
- Add 3 tbsp. l. soda.
- Boil the composition.
- Wait half an hour.
- Boil the cooled water again.
- Drain the water. Wash the kettle under running water.
Vinegar
Algorithm for combating the aroma of plastic with vinegar:
- Pour water into the kettle.
- Add half a cup of 9% vinegar and 2 tbsp. l. essences.
- Heat to a near boil so no water splashes out of the spout.
- Unplug the appliance, wait a little, then plug it back on.
- Repeat the procedure several times.
- Rinse the device well under the tap.
Bay leaf
Load the sheets into the appliance, add water and bring to a boil. Cool and repeat boiling again. Then drain the water and wash the device.
other methods
Some housewives use original methods that should be told. Everyone drank Sprite sparkling water, but did not even realize that it was used in everyday life to clean dishes. Someone tried to clean the kettle from extraneous aromas, and the method took root among the population. Fill the kettle with a drink and bring to a boil. Repeat boiling three times. Drain the water into the sink, and rinse the kettle well with clean water.
Another rare method of cleaning an electric kettle from the smell of plastic is the use of sauerkraut. Fill a third of the kettle with cabbage and fill it with water to the top. Bring to a boil, turn off for 3 hours. Remove the cabbage, drain the brine and thoroughly wash the electrical appliance.
After trying one of the methods, everyone will agree that removing the plastic smell from the kettle is not a difficult task. But only if the device is made of quality materials. Otherwise, the purchased electric kettle should be urgently replaced.
Household Appliances Kettle
What if a new kettle smells?
It happens that after purchasing a new kettle, a plastic smell is clearly felt in the drinks. If you sniff, then the body of the electrical appliance itself does not smell very much, but the water from it gives off plastic. This is due to the fact that special dyes and additives are added to the composition of the material in order to prolong the operation of the electric kettle and make it look more attractive.
The following methods will allow you to remove an unpleasant odor:
-
Packaged citric acid
... About 2 bags are poured into a full teapot and brought to a boil, then the water is not drained, but kept in the teapot for about 12 hours, then the solution is brought to a boil again, and everything is drained. The kettle is washed under running water.This method can be repeated several times until the smell disappears. If there is no acid in the bags, then squeeze the juice from fresh lemons. -
Vinegar
... According to the recipe, take half a glass of table vinegar and 2 tablespoons of the essence. All this is added to a full kettle. It is heated without letting the kettle boil, otherwise the entire contents may spill out. The kettle must be heated several times, let the water cool down and repeat the heating again. Then you need to pour everything out and rinse the kettle thoroughly in clean water. -
Lemon peel
... It is added to the kettle and boiled. The water is not immediately drained, since during cooling it is necessary to bring it back to the boiling point. -
Baking soda
... To remove the smell of plastic, add 3 tablespoons of soda to a full kettle and bring this solution to a boil, allow the water to cool and after a while boil it again.
A new kettle may smell unpleasant due to the packaging. The fact is that devices are often sealed in plastic packaging, where air does not get into. Therefore, if you have purchased a teapot with a smell, you need the plastic aroma to disappear. It is advisable not to use it for 3-4 days, and then rinse it in clean water and let it dry.
Radical methods: how to remove plastic smell from an electric kettle with vinegar and baking soda
A universal household cleaner is baking soda. Moreover, it is precisely its use that is the safest way for equipment and dishes. Soda can effectively deal with the unpleasant odor from the kettle.
As in the previous methods, you will need to pour the required amount of water into the kettle and add a few tablespoons of baking soda. After that, the composition is mixed until complete dissolution and the kettle is boiled. The technique is the same, after boiling it should stand for about an hour and boil again.
A cheap and effective remedy for the smell of plastic in a kettle is a vinegar and baking soda solution.
If there was no soda at home, then you can use vinegar or vinegar essence. The steps are different from the previous options. Here you need to add 150 ml of vinegar to the water, and then turn the kettle on and off, preventing it from boiling. After doing this, rinse the kettle thoroughly.
Rules for the use of folk remedies
Before trying to remove the plastic odor from the kettle using harsh household chemicals, you should try the available and effective natural remedies:
- Soda. We fill the container with cold water to the permissible maximum, add 3 tablespoons of baking soda to the liquid and stir until the powder dissolves. Bring the mass to a boil, leave it in the kettle to cool completely. Without renewing the liquid, boil it again and let it cool again. After that, drain, rinse the item and leave it open, allowing it to dry naturally.
- Lemon juice. On a standard device, you need to take 3-4 lemons. We squeeze the juice out of them, add to the water poured into the container. Bring the composition to a boil, then leave it for 12 hours. Bring the product to a boil again and drain. After the kettle has cooled down, you need to evaluate the quality of processing and, if necessary, repeat the approach.
- Lemon peel. The principle is similar to the previous ones, but in this case not juice is used, but the peel from 4-5 lemons. It is better if it is thick, with a persistent aroma. After the mass is brought to a boil, the broth must be infused for 24 hours. Then the liquid is boiled again and poured out.
- Vinegar. A full container of water will need half a glass of 9% table vinegar. You can also use vinegar essence, but you will need no more than 2 tablespoons of it. The liquid must not be boiled! She is only brought to a very hot state twice, taking a break of half an hour between sets.
- Bay leaf. This component smells so strong that it can overpower a persistent plastic smell.Put a few laurel leaves in a container filled with water and bring the liquid to a boil. We are waiting for the composition to cool down and drain. Repeat the approach if necessary.
- Sprite. This component is no worse than all of the above copes with an unpleasant aroma. They just need to fill the container and boil the mass. You should not try to dilute the product with water in order to reduce its consumption, the consequences can be the most unpredictable. If necessary, do as many repetitions as necessary to obtain the optimal result.
Despite the fact that such methods use natural and harmless components to humans, after manipulation, the container must be thoroughly rinsed. Ideally, the device should ultimately not emit any odors, including those that are characteristic of the listed cleaning agents.
Why does the new kettle smell like plastic?
There are several main reasons why a newly purchased electric kettle can give off a very harsh and unpleasant odor.
The new kettle smells like:
- Due to the remnants of a special technical oil that was used in the manufacture of the device and was not completely removed after the completion of the manufacturing process. In most cases, this problem is solved by boiling water three times in a new appliance, which should help get rid of the unpleasant odor;
- Due to the smell of chemicals and plastic, which got into a hermetically sealed bag with the device at the factory. A similar situation can also be solved without using any available methods. It is enough just to boil the new device with ordinary water, and then leave it to ventilate for 3 days (preferably in a well-ventilated area). This method allows you to permanently get rid of the stench;
- Because of the plasticizer that is used to create all the plastic parts of the electrical appliance. Its main function is to extend the life of the product, but it is very harmful to human health. If this smell is not removed by boiling and airing, then it is better not to use such a device, but to buy a new one, but of high quality;
- Due to the use of a cheap dye. If you cannot get rid of the smell of this dye as a result of boiling, then you should refuse to use the device.
The first two reasons are harmless enough and easy to get rid of. The second two are very significant and the use of a new device with an unpleasant odor of this nature is strictly not recommended. In this case, the new kettle should be returned to the store and a replacement for another device or a refund of the money paid for the product should be requested.
Important! Using water from a new kettle, which exudes a foul-smelling plastic smell, is prohibited for food purposes due to the toxic substances that are released when low-quality plasticizers and dyes are heated.
Reasons for the appearance of plastic odor
Before we start removing the odor from the kettle, let's find out where it comes from. The reasons for the smell of the new kettle and their harmfulness are as follows:
- Oil residues (technological). This problem can be easily solved by cleaning the appliance.
- The chemical, plastic smell can be due to the tight, almost airtight closure of the kettle. Eliminated by airing and one-time boiling of water after purchase.
- Low-quality cheap material with an excess of plasticizers. When heated, harmful substances enter the water used by humans. It is better to get rid of such a kettle as soon as possible - it is unsafe for health.
- The colorants in the new teapot, present in the base material composition, can also cause the plastic odor. Without thorough rinsing of the device, it is harmful to use the water heated in it.
- Sometimes the kettle smells due to prolonged use.This indicates the need to get rid of him and acquire a new kitchen assistant. When boiling water, pieces of destroyed plastic get directly into the human body along with drunk tea or coffee.
After considering the reasons for the smell of plastic, a logical question arises: is it possible to use such devices at all? Yes you can
But it is important to follow the rules of correct use:
- Do not leave water in the kettle after boiling.
- Do not boil water again.
- Heat only the amount of water you need immediately.
Expert opinion
Evgeniya Taran
If you think your device is made of high quality material and you have read all the precautions for using it, you can try to get rid of the plastic smell in the kettle.
How to get rid of an unpleasant odor in an iron teapot
Products made of enamel and stainless steel do not pose a health hazard and are safe to use. The only drawback of an iron electrical appliance is the "metallic" smell of water. Often, an unpleasant amber indicates that the tap liquid contains harmful impurities.
If the problem is water, use filters to clean it regularly.
In the case of a metal smell due to the kettle, you can eliminate the problem using the following methods:
- pour water into an enamel kettle, add 2-3 tbsp. l. soda. Turn on the stove, heat to boiling point. Then boil over low heat for half an hour;
- use apple, pear, and potato skins. Fill the dishes with water, add the cleaning, wait until it boils. Let it brew for 2-3 hours, the unpleasant smell will go away;
- pour water and an arbitrary amount of brine into the device. Boil the liquid, leave for 1-2 hours;
- on the bottom of a dry electric kettle, place 1-2 tbsp. l. coffee or aromatic tea. Leave overnight;
- boil water with bay leaves (half a packet of leaves for 1 teapot);
- boil the liquid, add 2 tbsp. Sahara. After half an hour, rinse the kettle;
- after repairing the electrical appliance, an unpleasant odor may occur due to residual technical oil. The problem is eliminated by washing the kettle with soapy water and drying it with the lid open.
Do not remove the smell from enameled dishes by boiling sweet carbonated drinks in them, you may ruin the appliance.
If the above methods have not had an effect, think about whether it is worth using such an electric kettle. An unpleasant aroma indicates the use of substandard (and possibly hazardous) materials in the production. Chemicals will enter food, which is harmful to health.
The article has been verified by the editorial staff.
How to get rid of the plastic smell in an electric kettle? A new kettle smells: what to do?
An electric kettle is one of the most popular kitchen appliances that allows you to quickly and efficiently boil water. However, some people are faced with the fact that the kettle emits an unpleasant smell of plastic, which is also transferred to the water. This problem can be observed in both new and old electric kettles. How to deal with this, you can find out below.
It happens that after purchasing a new kettle, a plastic smell is clearly felt in the drinks. If you sniff, then the body of the electrical appliance itself does not smell very much, but the water from it gives off plastic. This is due to the fact that special dyes and additives are added to the composition of the material in order to prolong the life of the electric kettle and make it look more attractive.
The following methods will allow you to remove an unpleasant odor:
- Packaged citric acid. About 2 bags are poured into a full teapot and brought to a boil, then the water is not drained, but kept in the teapot for about 12 hours, then the solution is brought to a boil again, and everything is drained. The kettle is washed under running water. This method can be repeated several times until the smell disappears.If there is no acid in the bags, then squeeze the juice from fresh lemons.
- Vinegar. According to the recipe, take half a glass of table vinegar and 2 tablespoons of the essence. All this is added to a full kettle. It is heated without letting the kettle boil, otherwise the entire contents may spill out. The kettle must be heated several times, let the water cool down and repeat the heating again. Then you need to pour everything out and rinse the kettle thoroughly in clean water.
- Lemon peel. It is added to the kettle and boiled. The water is not immediately drained, since during cooling it is necessary to bring it back to the boiling point.
- Baking soda. To remove the smell of plastic, add 3 tablespoons of soda to a full kettle and bring this solution to a boil, allow the water to cool and after a while boil it again.
A new kettle may smell unpleasant due to the packaging. The fact is that devices are often sealed in plastic packaging, where air does not get into. Therefore, if you have purchased a teapot with a smell, you need the plastic aroma to disappear. It is advisable not to use it for 3-4 days, and then rinse it in clean water and let it dry.
The above ingredients (citric acid, baking soda, vinegar, lemon peel) can be used to remove odor from the kettle. At the same time, there are several other ways to get rid of unpleasant plastic odors using substances that can remove odors without harm to human health:
Sprite sparkling water, as it contains citric acid and rich lemon flavors. They fill the kettle with it, boil it several times, then rinse the kettle thoroughly in clean water.
Bay leaf. A handful of bay leaves are poured into the kettle and it is boiled several times, they try not to drain the water right away, only after several procedures they wash the kettle.
Sugar. A few lumps of sugar are added to a full kettle of water and boiled.
Chemicals called surfactants. You need to wash the inside of the teapot with a special brush. It is only necessary then to rinse the kettle several times so that everything is thoroughly washed off.
Teapot cleaning chemicals should be used with caution only in cases where natural remedies cannot get rid of odors.
If the kettle is old and limescale builds up, an unpleasant plastic smell may be emitted as a result. How to deal with this, you can find out further:
In the next article, we will talk in more detail about how to get rid of scale in an electric kettle.
If the plastic is of high quality, it should not emit odors, or they should all disappear by themselves in a short time. But often there is an inexpensive plastic of poor quality.
It turns out a chemical cocktail, which in no case should be ingested.
It also happens that the smell appears in an old, proven teapot, from which no extraneous aromas were previously felt. It means that it is simply outdated and began to deteriorate, in which case it is urgently necessary to buy a new one.
So, when buying a plastic electric kettle, you need to pay attention not only to the appearance of the device, but also to the smell, because an unpleasant smell can speak of poor-quality material and harm health
Teapot cleaning lemon
Lemon will help with an unpleasant odor in the teapot
Lemon and its rind smells good and has properties to remove unpleasant odors. What you need:
- 2-3 lemons must be squeezed into a container, the seeds must be removed;
- squeezed juice must be poured into a container;
- cut lemon peels into large pieces and put in a teapot;
- pour water in the maximum volume;
- turn on the appliance and boil several times;
- leave to cool for a day.
If the unpleasant odor persists, it is better to repeat the procedure.
You can replace lemon with regular citric acid. To do this, pour 25 grams of powder into a container and put to boil.She will not only cope with this problem, but also clean the walls. After the procedure, the device is washed with detergent, and then you need to pour in water and turn on the device with water, and then drain it. After such a procedure, the device will be clean and with a pleasant aroma.
Vinegar will clear the kettle
