Repair of electronic cigarettes at home. ego-t atomizer: step by step guide to cleaning and maintenance

Cleaning the clearomizer

Unfortunately, the old models of clearomizers did not understand. Therefore, cleaning them was not possible. However, they could be replaced. In newer clearomizers, the mouthpiece, spray device and vaporizer can be detached. If a thorough cleaning is not expected, then the clearomizer itself can either be rinsed under running water or wiped with a napkin. With the rest of the details, you should do the same: just get wet and dry all the elements with a napkin. Such cleaning should be done if you plan to change the taste, since the remnants of the previous one on the walls of the clearomizer can spoil the future.

A thorough cleaning does not require the use of acids or other cleaners. It is enough to rinse the parts in hot water in several passes. Place all the disassembled elements in hot water, then after a while remove them, wipe them with a napkin and immerse them in fresh hot water again. You need to repeat the procedure several times. Do not use boiling water. The optimum temperature will be 40-50 degrees. Otherwise, plastic or other synthetic elements could be damaged.

Battery and cartridge care

The rules for caring for the gadget are simple: you need to fill it with a high-quality liquid, charge it regularly and periodically clean it from accumulated carbon deposits. The product must be stored in a factory case, protecting it from dampness and shock.

Flounder fish has not only an unusual appearance, but also a pleasant aroma and taste. Except…

Shoe cleaning is not an easy process. It is necessary to take into account not only the degree of pollution, but also the material from ...

Today, an increasing number of heavy smokers, trying to get rid of their addiction, are switching to electronic cigarettes. This is due to many factors.

Firstly, significant savings in money, and secondly, the smoke coming from electronic cigarettes is less annoying to others and less harmful to the vaper himself.

However, when switching to electronic cigarettes, not everyone knows how to properly care for them. If not properly cared for, your favorite accessory can quickly stop functioning. In this regard, if you have recently switched to electronic cigarettes, you should familiarize yourself with the basic rules of care.

General terms of use

So, after you become the proud owner of an electronic cigarette or vaping device, your responsibilities include familiarizing yourself with the basic rules of caring for it.

• When filling a cigarette with liquid for vaping, you must strictly monitor its amount. How to refuel correctly, read here.
• Liquid for a cigarette, as well as all necessary components, should be purchased only in specialized retail outlets. Otherwise, saving money can shorten the life of the device.
• It is required to clean the electronic cigarette in a timely manner.

If you prefer to constantly change the taste of the liquid, you should thoroughly clean the cartridge before each refueling. This will avoid mixing flavors.

How an electronic cigarette works

Of course, not everything about modern electronic cigarettes has been fully studied, but the advantages of using them in comparison with ordinary tobacco are obvious.

First of all, these are:

And yet: why does a person need an electronic cigarette? Many people think about this, but in this case it is impossible to give an unambiguous answer.

This invention was patented in Hong Kong in February 2004.The Chinese pharmaceutical scientist Hon Lik invented the electronic cigarette to safely simulate smoking regular cigarettes.

The death of his father from lung cancer pushed him into this particular area of ​​research and to search for an alternative to traditional tobacco smoking.

As a result, he came up with a modern electronic cigarette, the principle of which is to generate nicotine in steam. The electronic version is not harmful to health, unlike tobacco products.

The whole truth about e-cigarettes is that it does not harm health when consumed in moderation, helps to get rid of nicotine addiction and gives a lot of pleasant sensations.

4 Installing a new wick

Having understood the properties of cotton wool and the types of vaping devices, you can start laying the wick itself. Many people use their own specific systems and methods for this procedure, but there is one universal type of wick replacement that most e-cigarette buyers use. It is also worth knowing that to extend the life of the spirals, you need to renew the wick once a week. Step by step guide:

• Before starting to replace the cotton wool, you need to check the charge in the batteries installed in the device. It should be enough to burn the spirals and warm up after the wick is installed. Approximately more than 50% charge is needed, otherwise during the procedure you will have to put the device on recharge.
• After checking the charge of the batteries, you can start disassembling the atomizer. In dripomizers, this is easy to do, you just need to remove the dome from the atomizer, and the base will be completely open. In RDTA, the difficulty lies in the fact that the dome can be removed in the same way as on the RDA, but the ends of the wick are lowered into the tank under the base of the device and in order to access the base, you need to unscrew the skirt near the site for installing the spirals. The most difficult preparation for replacing cotton wool is for bakomizers. The design of such devices is more complicated. To disassemble the tankomizer, you first need to remove the cover over the filling adjustment holes, unscrew the evaporation chamber dome and remove the wick fixing ring from the slots for lowering the ends of the cotton wool.
• As soon as you have access to the spirals, you need to remove the old wick. Clean the atomizer base plate with a tissue or absorbent cloth. Next, switch the device to a power of 30 watts in varivatt mode. Press the Fire button and heat both spirals evenly. Once the coils are hot, turn the e-cigarette over and dip the coils into clean, cold water. When all the carbon deposits have been removed, you need to warm up the spirals again, without bringing them to full heating and put the device back.
• Cut out two strips of cotton wool and remove the pressed top and bottom of the sheet. Remove lumps and other foreign objects with tweezers. Twist one end into a tube and push it into the spiral hole. Place the edges evenly on both sides in relation to the installation site of the spirals. Cut off a strip of cotton wool around the edges, but so that the ends do not go beyond the base. In RDA devices, lower both ends into the well and tuck them under the spiral. Do the same with the second spiral. In RTA atomizers, you need to thread the ends of the wick into the slots for laying cotton wool and secure it on top with a locking ring. In RDTA bases, the ends are cut to the length of the tank installed under the spiral pad. Then all the long edges are lowered into the tank itself and slightly wrapped under the bottom of the base. The skirt for controlling the fluid supply to the device body is twisted.
• After proper installation, you need to soak the cotton wool with liquid. When the wick is completely moistened and absorbed moisture, press the Fire button and, by heating, saturate the spiral itself with liquid for vaping.
• When all the procedures for laying cotton wool are completed, you need to assemble the atomizer in the reverse order. All components of the device must be washed before complete assembly. You can rinse the parts of the atomizer under running water.In the first hours of vaping, you will feel the taste of cotton wool. This is completely normal. It takes a little time for the cotton to be completely saturated with the flavored liquid before it tastes.

A similar algorithm for installing a new wick is used with almost any device. Cleaning an e-cigarette using this method is not difficult. In the step-by-step instructions, all the complex technical aspects that may be encountered during such a procedure are presented.

What should not be done when cleaning an e-cigarette?

Do not start cleaning the cigarette immediately after use. Water pouring onto hot or even just hot elements can, on the contrary, provoke the formation of a persistent plaque and only aggravate the cleaning process.

Do not use any cleaning agent to rinse the cigarette. It is very difficult to wash off their smell, and it is almost impossible to get rid of chemical particles - as a result, they will inevitably get into the lungs.

If it is not possible to use alcohol, you can use vodka, in the absence of the latter, it is better to take an aqueous solution of vinegar or lemon. Various colognes and perfumes are not suitable for the same reasons as chemical cleaners - excess chemicals will get into the lungs, and nothing will get rid of the smell.

«>

How to clean an atomizer

An atomizer is an evaporator that, together with a generating unit, is responsible for the formation of steam

It is very important to understand how to clean the vaporizer of an electronic cigarette. Today, there are a huge number of video clips on the Internet that not only tell how to clean an atomizer, but also clearly show the features of this process.

There are three ways to clean the evaporator:

• Ultrasonic bath;
• Burn
• Flushing.

The e-cigarette should be cleaned only after the device has cooled down.

And the evaporator itself is purged before flushing. Many are worried about the question of whether it is possible to wash the device - it is possible and even necessary, only carefully and in compliance with all the rules.

Flushing

To wash the vaporizer of an electronic cigarette with water, it is necessary to preheat the liquid. The atomizer is disconnected from the battery and immersed in water for 15-20 minutes. Then it is taken out and again thoroughly blown through the end. After changing the water, the procedure is repeated again. Now you can leave the atomizer to dry naturally for a day.

If it is heavily soiled, it makes no sense to wash an electronic cigarette with plain water. To do this, you should take care of the presence of alcohol or vodka. An evaporator is placed in the liquid and left for several hours. Then the device should be rinsed with water and blown out, and left to dry.

Many users replace alcohol and vodka with Coca-Cola. There are a lot of positive reviews about the properties of this drink during cleansing.

After rinsing, the elements should dry naturally

Ultrasonic cleaning

It is more correct to call this cleaning method an ultrasonic bath. It is a very handy device that is also used for cleaning jewelry and electronic circuit boards. Usually, jewelers and mobile repairmen always have such a device, but it is not very expensive, so it is advisable to buy it yourself. How to clean the vaporizer of an electronic cigarette using such a device is described in the instructions for it.

Burning

There are special tool kits for cleaning e-cigarettes

Each owner uses this method at his own peril and risk. It is worth resorting to if it is not possible to clean the evaporator in another way, for example, if the spring is dirty. Also, do not resort to this option too often. To clean the evaporator in this way, you should:

1. Disconnect the atomizer from the battery and purge it.
2. Then rinse the evaporator under running water and blow again.
3. Remove the cartridge from the device and connect the evaporator to the battery.
4. If possible, set the operating voltage and activate the device for 4-5 seconds.
5. Leave the device to cool down and turn it on again for 4-5 seconds.
6. This procedure (points 5-6) should be repeated 10-15 times.

It is very important not to overexpose the activation mode for more than 5 seconds in an electronic cigarette during burning, as the atomizer may deteriorate.

After the last procedure, allow the device to cool down and attach the cartridge. Then they turn on the cigarette and make several small puffs with the empty cartridge, while the steam is not worth swallowing. And only then you can fill the cartridge with liquid and use the device for its intended purpose.

How can the evaporator be cleaned

With regular use of an electronic cigarette, some of the substances that make up the batch do not completely burn out and sticks to the steam generator in the form of a sediment. Soon, these tiny particles of suspended matter begin to clog the air vents.

During use, the internal parts of the electronic cigarette are gradually covered with particles of the smoking mixture.

There are several methods that can be used to effectively clean the steam generator. The most effective methods include the following:

1. Burning through.
2. Washing.
3. The use of ultrasound.

For inexperienced vapers, especially if they are faced with the problem of steam generator contamination for the first time, it is better to entrust such an event to a specialist. But, if the user is confident in himself, you can clean the atomizer on your own.

Burning steam generator

This method of cleaning the evaporator is quite difficult for a beginner vaper. It is better to entrust such cleansing to specialists or to carry it out independently, but under the guidance of a more experienced vaper. Burning the atomizer consists of the following steps:

1. Remove the steam generator from the ES housing.
2. Thoroughly clean it from the remains of the smoking mixture.
3. Rinse the device under running water.
4. Dry and blow off the steam generating element.
5. Then put the atomizer back into the ES and hold down the start key for 5-7 seconds. Please note that this operation is carried out without a cartridge. Such repetitions should be carried out 6-10 times (it depends on the degree of pollution and the volume of the steam generator).
6. Then it is necessary to allow the atomizer to cool completely and attach an empty cartridge.
7. The next step is to take empty puffs until the vapor is no longer emitted from the cigarette.

This type of cleaning of the ES steam generator is quite dangerous. First of all, the fact that a user who does not have experience in such procedures can easily damage the components, than provoke a breakdown of the gadget. Therefore, it is better to entrust this process to an experienced vaper.

It is necessary to ensure that all parts of the ES were purged and dried.

Atomizer rinsing

Is it possible to wash the vaporizer of an electronic cigarette without using annealing, which is difficult for beginners? This method of cleaning the device from soot is also successfully and widely practiced. But it also has its own nuances. The algorithm on how to flush the vaporizer of an electronic cigarette is as follows:

1. We completely clean the steam generator from all particles of the smoking mixture. This can be done by intensive blowing from the side where the contacts are located for connecting them to the battery.
2. Thoroughly rinse the heating device under running warm water. Make sure that the water pressure is not too strong.

You can simply dip the atomizer completely into a solution of alcohol or regular vodka. And leave it there for an hour. Although many vapers calmly "alcohol" the steam generator for 2-3 hours. At the end of the water procedure, thoroughly dry the steam generator and blow it through.

Many vapers also practice chemical atomizer cleansing. In this case, the device is placed in a container filled with a vinegar solution (25 ml of vinegar per glass of water). The heater is kept there for 10-12 hours, then it is blown out and dried.

Ultrasonic cleansing

For this method, you should arm yourself with a special bath device that generates ultrasonic waves. This device is often used by jewelers to clean jewelry. The procedure is extremely simple - the steam generator is completely placed in the bath, ultrasound effectively removes all accumulated deposits.

Having mastered these methods of cleaning the atomizer, the fan of electronic cigarettes can significantly extend the life of the smoking device. Taking care of his favorite gadget competently and in a timely manner, the vaper will enjoy it for a long time without spending extra money on purchasing a new electronic cigarette.

How to take care of the cartridge and battery

The cartridge and the power supply do not need special care, it is important to follow the basic rules for the operation of these components:

• charge the battery completely before using the electronic cigarette;
• the duration of the first battery charge must be at least 12 hours;
• it is not recommended to allow liquids to come into contact with the battery.

The battery is cleaned with a dry cloth; just wipe the surfaces.

The cartridge also does not require special care. However, you need to know how to properly operate it. First of all, this part must be regularly washed and dried thoroughly, and only then proceed to replace the liquid.

In addition, the atomizer must not be allowed to come into contact with the cartridge in the part where the coil is located. Compliance with these rules will help preserve parts and extend their life.

How to clean an atomizer

The atomizer is also called a vaporizer. It is he who, together with the power supply unit, ensures efficient steam generation. There are 3 options for caring for this element of the electronic cigarette device:

• flushing;
• ultrasonic bath;
• burn.

Before proceeding directly to rinsing the atomizer, it must be purged. This is done so that no residual liquid remains from the cartridge in the evaporator. You cannot clean a hot atomizer, it must cool down.

Hot water can be used for rinsing. The evaporator is disconnected from the accumulator and immersed in the liquid for 15-20 minutes. After that, the remaining water is removed and blown out of it through the end that serves for attachment to the battery. Change the water and repeat the procedure one more time. Then the atomizer is placed upright and left to dry for 24 hours or more.

Do not wash heavily soiled evaporator with water. Instead, use either vodka or diluted alcohol. In this case, the atomizer is left in the liquid for several hours. Vodka or alcohol can be replaced with Coca-Cola. There are a lot of rave reviews that this drink perfectly cleans away plaque. After soaking in an alcoholic or other solution, the evaporator is washed with warm water and blown out.

This device is used to clean jewelry and electronic boards. Therefore, it is in the arsenal of jewelers and mobile phone repairmen. An ultrasonic cleaner is an inexpensive device. It is not difficult to buy it to make it easier to care for your e-cigarette.

The burning procedure is performed at your own risk. Most often they resort to it when it is impossible to clean the evaporator coil with high quality. Sometimes burn-in is the only measure that allows the atomizer to return to its former functionality. Burning should not be done often. The procedure for the procedure is as follows:

• the atomizer is disconnected from the battery;
• blow it out;
• washed under running warm water;
• blown again;
• remove the cartridge and connect the atomizer to the battery;
• if the device has such a function, set the operating voltage (voltage);
• press the activation button of the cigarette and hold it in this position for 4-5 seconds;
• allow to cool down and press the activation button again;
• repeat the procedure 10-15 times.

It is important not to overexpose the button for more than 5 seconds, as this could damage the evaporator. After the end of the burning, take the cooled atomizer and connect an empty cartridge

A series of very slow puffs is performed. The resulting vapor is not inhaled, but released from the mouth so that it does not enter the lungs. After completing this procedure, fill the cartridge with liquid and proceed to normal vaping.

Features of cleaning some models

The cleaning of the device directly depends on its model. There are several options available to achieve good results.

Ego-T

It is worth starting to service the device from the battery compartment. It is also recommended to degrease the contacts. Then it is worth separating the mouthpiece, draining the liquid and removing the heater. The next step is to clean the wick, rinse the coil and tank. The mouthpiece channel should be wiped clean. After drying, the device should be assembled, refilled and charged.

Ego aio

When cleaning the device, it should be borne in mind that its back cannot be unscrewed or removed. To dismantle this element, it should be knocked out of the case.

It is important to do this very carefully to avoid damaging the case.

Evod

Cleaning the device involves a certain sequence of actions. To do this, it is recommended to remove the heating block and dispose of the remaining liquid. Then you need to remove the silicone seal and detach the top of the atomizer. Then unscrew the heating element with a wick and take out the bottom of the converter.

Eleaf

To clean such a device, it is first recommended to unscrew the liquid tank from the atomizer and disconnect it. Then it is worth unscrewing the evaporator and removing the top of the atomizer. Then pull out the rubber grommet and push out the spiral.

If the wick is clogged or slightly burnt, it should be replaced.

The condition of the turns of the heating device is of no small importance. If carbon deposits are present on them, the parts should be calcined.

Then assemble the device. This is done in reverse order.

How to clean an electronic cigarette

An electronic cigarette consists of several parts. Before cleaning it, you must thoroughly clean the atomizer. This is the element that serves to ensure the production of steam. That is why, for the long-term operation of an electronic cigarette, you should remember the rules for caring for a steam generator.

After every thousand puffs, it should be cleaned. If you notice that less steam is generated, you should clean the steam generator immediately. Here are some more tips on how to get more steam.

Atomizer cleaning instructions

First you need to disconnect the atomizer from the battery. Next, you should wait until the excess liquid drains. To speed up the process, it is allowed to blow out the device from the side of the mouthpiece. Then the device is rinsed under running water. Then it is blown again and left to dry. Once the atomizer is completely dry, put it back in place.

These manipulations are very important. This is due to the fact that during operation, harmful substances accumulate in the steam generator, which not only have a bad effect on the work, but are also harmful to the bather.

If you did not clean the steam generator in a timely manner, harmful substances have been deposited on its surface, which can only be removed with an alcohol solution. In this case, it takes about 10 minutes to clean.

In especially advanced cases, it is permissible to use a 9% vinegar solution. To do this, take a glass of water and dilute a tablespoon of vinegar in it. A steam generator is lowered into the resulting mixture. After that, the deposits are carefully removed with cotton swabs.

Attention! The steam generator has a spiral that heats up during smoking. The deeper the puff, the stronger the heating.

For long-term operation, it is not recommended to tighten too deeply.

Types of electronic atomizers

Steam generators are constantly being improved and changed. Improved devices are released to help manufacturers stay “afloat” amid growing competition

It is important to understand the types of atomizers, since when caring for them, sometimes you need to change the liquid in an electronic cigarette, and such an event depends on the type of steam generator used

Atomizer types

All types of evaporators can be divided into two types according to their main configurations:

Consisting of 3 parts:

1. Evaporator.
2. Mixed cartridge.
3. Accumulator battery.

In such a steam generator, the battery can be recharged from USB or directly from the mains. Liquid containers are reusable (you can fill them with liquid yourself).

Consisting of 2 parts:

1. Evaporator.
2. Battery.

This device is non-separable, and the steam generator itself is disposable. But, despite the fragility, this type of ES is as easy as possible to use. It is with them that beginners are advised to begin acquaintance with smoking devices. But for more experienced users who like to experiment with tastes, it is advisable to select already reusable cigarettes.