Cif cleaner for the bathroom - reviews

Cleaning at home

You can clean and whiten the bath with the tools at hand that can be found in any home. The methods will help save your budget and not harm your health.

Baking soda

Baking soda is a great alternative to expensive cleaning products. It brilliantly removes fresh plaque, streaks and yellow spots. Soda is applied to a moistened surface, rubbed with a sponge or cloth and left for an hour, after which it is washed off. Soda is more often used to clean cast iron and steel bathtubs, with other surfaces you need to be careful not to scratch them.

Lemon acid

Citric acid is used together with baking soda to clean the bathroom, enhancing its effect. First, the bath is treated with a soda solution, leaving it to act for 10 minutes, after which the surface is wiped with citric acid diluted in warm water, which is left for half an hour. A citric acid solution is prepared by adding one tablespoon of powder to half a liter of liquid. After cleaning, the product is thoroughly washed off with water.

You can use the acid as an independent remedy. A tablespoon of the powder is diluted in a glass of water, the solution is applied with a sponge to the surface of the bathroom and left for 10 minutes, after which it is washed off. The procedure can be repeated if necessary.

Toothpaste

White toothpaste with whitening effect will clean and whiten the surface of the bath. The product is applied with a sponge. The method is not very cheap, but effective.

Ammonia

Ammonia is mixed with hydrogen peroxide in equal amounts and the contaminated areas of the bathroom are wiped off, and then washed off.

Vinegar

Vinegar will well dissolve even old limescale, but for this you need to soak problem areas for a long time, for example, apply the product in the evening, and rinse off in the morning. The method is not suitable for those who cannot stand the pungent smell of vinegar.

Popular products from the category household chemicals

The range of household chemicals is very impressive. After analyzing the reviews of housewives, you can make a rating of the most popular bathroom cleaners:

1. Comet is a popular bath cleaner that can be purchased in gel or powder form. Easily removes common dirt, but for more serious dirt requires physical effort. It has an unpleasant odor, which is why it is not recommended for allergy sufferers. In all manufactured forms, it contains small abrasive particles, which makes it well suited for cast iron baths.
2. Sun Wedge. Does not contain abrasives and phosphates, ideally suits all types of baths, does not have a pronounced odor. Sold in the form of a spray, easy to apply. Effectively removes the usual soap stains, dirt, as well as more severe dirt (rust, plaque, etc.). Sun Wedge is the perfect combination of price and quality.
3. Mr. Chister. The cleaning solution is a professional product for the entire bathroom, applied with a spray bottle. Suitable for all types of coatings. Smells good, disinfects, removes all types of dirt, removes mold.
4. Frosch is a good bath cleaner with the addition of grape acids. Easy to spray, easy to rinse, cleans well, suitable for all surfaces. Smells good, safe for the environment, including humans.
5. Mister Bath Muscle. Convenient to use thanks to the atomizer, smells good, suitable for all types. Good for general cleaning and stain removal, but does not always overpower rust.
6. This bath product is made from natural ingredients. It is highly appreciated for its excellent quality and 100% product safety.He can handle any stains, has a pleasant smell, does not cause allergies.
7. Dakotoron. It is used for cleaning all possible surfaces in the bathroom. Copes with stains of any complexity, destroys fungus, disinfects. It does not include surfactants, chlorine and phosphates. Used for all types of coatings.
8. Arch Effect. Has a liquid form, carefully cleans all surfaces with high quality, gives shine. Covers the coating with a special layer that repels water, preventing the appearance of plaque and other contaminants.

This is not the entire list of possible remedies that can be used to effectively clean a cast-iron bath at home.

Folk cleaning methods

Our grandmothers know how to clean a cast-iron bath from all kinds of pollution, who have been using proven folk methods for many decades in a row.

To remove rust

How to clean the bath from rust is described in the following recipes:

1. With soda. To clean the bath with soda, you need to immediately wet the surface a little, then apply the substance to the rusty places, rub gently with a soft, damp sponge. In addition, baking soda is excellent for disinfecting and deodorizing.
2. With borax and vinegar. It is necessary to connect them together in equal quantities, moisten a cloth in the resulting solution, wipe the rusty parts of the bath.
3. With salt and turpentine. Prepare a thick gruel, apply to dirty places. Helps not only get rid of rust, but also prevent its reoccurrence.

To restore the original whiteness

The following tools will help you to clean the bath from yellowness and return the coating to its original cleanliness:

1. Vinegar. To clean the bath with vinegar, you need to moisten paper napkins or rags in it, then cover the entire area of ​​the bath with them, leave for half an hour. Vinegar oxidizes and disinfects well.
2. Powdery whiteness. Dilute the whiteness with water until a thick gruel is obtained, then apply it to the entire surface. Hold for at least half an hour, then rinse well. This method is even suitable for cleaning an old bath in a state of disrepair.
3. Toothpaste. It is applied locally to problem areas or around the entire perimeter.

For removing limescale

How to clean the bath from plaque and forget about it forever, the following methods will tell you:

1. With the help of ammonia. Apply the solution to problem areas, leave for a while, then rub and rinse if necessary. Ammonia is very easy to use, it is convenient for them to process the entire surface.
2. With the help of soda and dry mustard powder. Combine in a ratio of 1: 3, clean the bath. Will overcome not only plaque, but also rust. Ideal blend for regular weekly cleansing.
3. Using a mixture of vinegar and salt. This method is especially suitable for those housewives who have deposits or stains from hard water on the bathroom.
4. With lemon juice. This method will be a good addition to one of the methods of dealing with plaque, and it alone is rather weak. Lemon juice is indispensable for preventing plaque reoccurring, you just need to rub it occasionally on the places where plaque usually forms.

Routine cleaning

So that you do not have to puzzle over how to wash the bath from rust and deposits, you need to constantly keep it clean. For the usual cleaning, the following natural remedies will become indispensable:

1. Soda combined with laundry soap. Cleans and disinfects effectively.
2. Starch in tandem with salt. They perfectly clean and disinfect cast-iron bathtubs, promote their bleaching.

Now every housewife knows how to clean the bathtub at home without buying household chemicals.

What can not be used for cleaning

The cast iron bathtub is quite durable, which cannot be said about its coating. Old-fashioned bathtubs have always been covered with porous enamel, while modern coatings have a glossy surface and a dense structure.This raises the question of how to clean the bathtub so as not to harm any of the varieties of its coatings? For this, the following means and tools cannot be used:

• abrasive cleaners;
• cleaning agents and solutions containing concentrated hydrochloric acid (for example, "Silit" or "Sanitary 2");
• brushes with metal teeth;
• fiberglass sponges;
• blade, knife and similar sharp objects of improvised use.

Failure to observe these rules, the surface of the coating will be destroyed, lose its shine, and become rough to the touch.

Cleaning Tips:

• it is undesirable to leave the bathtub wet, it is better to take a minute of time and wipe it with a dry soft cloth;
• give preference to loyal liquid gels or creamy solutions;
• if you need to rub a heavily soiled area, you can use a washcloth or an old toothbrush.

It is advisable to wash the bath soon after using it, then the dirt will not have time to be absorbed and it can be removed with ordinary soapy water;

The better to clean acrylic bathtubs

Bass

Bass Gel is a specialized cleaner for acrylic and enamel bathtubs. It can be used for both daily cleaning and general cleaning. It easily removes stubborn deposits and stubborn dirt.

Pros:

• dissolves even old stains and streaks;
• the density of the gel allows you to use it for cleaning vertical surfaces;
• there are no aggressive components in the composition;
• gently affects dirt, leaving no scratches.

No cons were identified.

Acrylane by Bagi

This product has a foamy consistency. Acrylane fights not only limescale and rust stains, but also bacteria, microorganisms, and molds. It can also clean glass surfaces, tiles, ceramic tiles and enamel.

This composition creates a special film that protects the surface from the accumulation of lime deposits and stains.

Pros:

• fights all types of pollution;
• acts carefully and delicately;
• easy to use;
• quick to use;
• affordable cost;
• has a disinfectant effect

Minus - a pungent, unpleasant smell.

Which bath cleaner is better to buy

When choosing a cleaner for plumbing, experts recommend paying attention primarily to liquid and gel compositions. They are softer than powders, they act on dirt and are suitable for all types of surfaces.

In unventilated rooms, the pleasant aroma of the formula is important, which means that you need to choose among compositions without chlorine and a high concentration of acids.

Also, before buying, you should make sure that the composition is suitable for the material from which the bath is made. Cast iron, enamel and acrylic surfaces require different cleaning approaches. Acrylic, for example, does not tolerate boiling water, alcohol, solvents, and enamel is afraid of abrasives and chlorine.

The best glass cleaning sprays

Most housewives prefer to buy glass cleaning sprays, they are convenient to apply to various surfaces, and then wash with one stroke of a soft cloth.

Clin "Windows and Mirrors" - to keep the glasses clean longer

5.0

★★★★★
editorial estimate

98%
buyers recommend this product

See overview

Clin Windows & Mirrors - isopropyl alcohol based glass cleaning spray. The special formula does not require polishing and does not leave streaks, and also creates a water-repellent invisible film that allows the glass to stay clean longer.

The manufacturer offers a choice of lemon or apple scent. The liquid is sold in a 500 ml plastic bottle. There are special notches on it so that the bottle does not slip in the hand during cleaning. The handy spray is childproof and has a foam nozzle.

Pros:

• convenient and practical bottle;
• there is a choice of flavors;
• 2 spray options;
• does not require polishing;
• water-repellent formula;
• leaves no residue.

Minuses:

difficulties during the first use.

Many have trouble opening the bottle for the first time. The drawn instructions on the packaging on how to turn off the child protection system and bring the sprayer into working condition is not very clear. Although here it is enough to simply turn the cap 180 degrees.

Mr. Muscle with ammonia - popular glass cleaner

5.0

★★★★★
editorial estimate

94%
buyers recommend this product

Mr. Muscle is a spray designed for cleaning glass surfaces. Thanks to the liquid ammonia included in the composition, the liquid easily copes with oil stains, soot and other contaminants.

The hostesses write in the reviews that they also successfully use Mr. Muscle for cleaning stainless or chrome-plated household appliances, tiles and metal furniture. The spray is easy to wipe off without leaving streaks or film on the surface.

The 500 ml clear plastic bottle allows you to monitor the level of the remaining liquid, and the fine dispersion spray ensures an economical use of the product and does not leave smudges on the glass.

Pros:

• affordable price (140 rubles per bottle);
• presented in most stores;
• does not leave streaks;
• low consumption;
• convenient application without smudges;
• transparent bottle.

Minuses:

Strong smell.

Due to the pungent smell, Mr. Muscle is recommended for use in ventilated areas.

Cinderella "Spring Flowers" - an excellent budget tool

4.9

★★★★★
editorial estimate

90%
buyers recommend this product

Cinderella "Spring Flowers", despite the low price, effectively copes with dirt of various origins and does not leave marks on the glass after application. Also, the product is suitable for cleaning plastic profiles, which means that when washing windows, no additional cleaners are required.

The light pink liquid has a not too harsh floral scent. The clear plastic bottle has finger recesses to prevent the spray from slipping in your hands. The atomizer is convenient and reliable. A couple of clicks are enough to clean the mirror.

Pros:

• low cost (up to 70 rubles for 500 ml);
• pleasant aroma;
• economical;
• suitable for plastic surfaces;
• removes dirt well.

Minuses:

not sold in all stores.

Cinderella "Spring Flowers" is a budget cleaner that is not inferior in quality to more expensive counterparts.

Folk remedies for cleaning

If you want to save money, then “home cleaning technologies” are also suitable. Western products are more effective, but they attack acrylics aggressively. Folk cleaning methods are cheaper. Here are several ways.

How to clean an acrylic bathtub with what every home has? Soapy stains are easier to handle. This is not as depressing as limescale. You can wash acrylic with a few drops of wine vinegar diluted with water. This mixture is safe, but it works just as well as other expensive acrylic surface care products.

How to clean an acrylic bath from limescale? Lime deposits are difficult to remove, even with cleaning agents. But it is possible to withdraw.

You will need to do the following:

• fill up a tank of warm (not hot) water;
• pour 1 -1.5 liters of vinegar;
• after 10 hours drain the water and rinse the bathroom with a sponge.

Another nuisance that happens is rusty stains on the side of the bath from the water flowing from the tap. It is easier to keep an eye on the mixers and change them in time than remove rust. The acrylic bathtub does not rust. And there are no other reasons for the appearance of rust, except for current taps. But if this has happened, how can the pollution be dealt with? How to clean the bath from rust?

To remove rust, either special chemicals or folk methods are used that do no worse than their western competitors cleaners. Citric acid diluted in water in a 1: 2 ratio will help. The secret to making the mixture is simple:

1. A glass of water with citric acid diluted in it is thrown into the water bath.
2. Literally after 10 minutes, the bath is washed off with water.
3. Wipe clean.

Over time, yellowness appears on the bathroom. How to clean the bath from yellowness? The yellow color appears on the surface due to rust and salts that city water from the tap carries with it. It is impossible to wash off this plaque with abrasive substances or acidic mixtures. Wash off the yellowness with the same vinegar (9%), or diluted oxalic acid. It is advisable to warm up the water in which you will dilute the vinegar or acid, but not too much. Since cheap acrylic does not tolerate high temperatures.

The most commonly used folk remedies for cleaning acrylic bathtubs

How is disinfection carried out?

How to wash an acrylic bathtub so that there is no doubt that it is disinfected and not dangerous for bathing small children? For disinfection, one more agent is needed - Ravak Desinfectant. Means from the Czech company Ravak. The company constantly checks its products for quality and guarantees that they are safe to use.

The order is as follows:

1. The reservoir is collected to the top.
2. The product is diluted 1:10 and poured out.
3. Stir and leave for literally 10 minutes.
4. Then wash off with clean water and a sponge.

It is not used often, therefore, it is profitable to purchase 1 bottle. It disinfects not only the tank, but also the entire bathroom. Ravak Desinfectant costs 600-800 rubles. for 500 ml. But remember, the product is highly diluted with water. After the disinfection procedure, you will be sure that the bath is clean and safe from bacteria on the acrylic.

Each of the funds listed in the rating has both advantages and disadvantages associated with the composition of the substance. There is no optimal detergent composition. If you cannot find the listed ones in the nearest store, another means for washing acrylic bathtubs is quite suitable. The main thing is to read the composition, and make sure that there are no chemicals in it: chlorine, ammonia or acids.

But it is better not to allow the formation of rust or plaque, and wash your plumbing 2 times a month with non-abrasive detergents. Suitable detergents of Russian production, marked "for acrylic bathtubs" which are not expensive. This will keep the bathroom clean and comfortable at all times. And it is pleasant to swim in a clean and white tank, and not in the fact that it has turned yellow and "acquired" lime, as a "gift" of fate. If the drain or pipes are clogged, find out in detail how to clean.

Video:

Video:

Prophylaxis

To keep the bathtub white for a long time, you must regularly clean it in the most gentle way. If the surface is scratched due to the use of abrasives or hard brushes, dirt will eat into them, giving a sloppy appearance. After each use of the bath, rinse it with clean water and wipe it dry with a soft cloth or towel, this will help to avoid soapy streaks and salt deposits that remain when water droplets dry. Regular airing will prevent mold growth.

For daily and general cleaning, you need detergents that will remove dirt and preserve the integrity of the bath coating, giving it a glossy shine.

Choosing the right cleaner is important to save you time and effort when cleaning.

Share link: