Video
The presented videos will help you to understand in more detail the rules for cleaning the toilet bowl:
About the author:
Found a bug? Select the text with the mouse and click:
Do you know that:
Fresh lemon is not only suitable for tea: clean the dirt from the surface of the acrylic bathtub by rubbing with half a cut citrus, or quickly wash the microwave by placing a container with water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt will simply be wiped off with a sponge.
Traditional methods of dealing with rust
How to clean a toilet bowl from rust with folk remedies? There are always folk remedies and for all occasions, however, they are not always effective enough, but several recipes are given for lovers of folk wisdom.
Rust remover vinegar
How to clean a toilet bowl from rust with vinegar? Take a rag, soak it in vinegar and cover the stain to be removed, leave the rag to eat away at the rust for a while.
There is another way to clean rust in the toilet: 70% vinegar is heated to a temperature of 40 ° C, then the toilet is poured with it. This method is good for cleaning the toilet from limescale and stone.
A solution of vinegar and baking soda to remove rust on the toilet
The procedure is carried out in the evening so that the contaminants are exposed to the acid all night. It is recommended to add 1 tbsp to vinegar. l. soda to increase its cleansing power. Iodine is mixed with 9% vinegar.
Citric acid is an excellent anti-rust agent
Citric acid can be used instead of vinegar. Pour 2 bags of acid into the toilet and do not rinse for 2 hours.
Ammonia and hydrogen peroxide - duty stain removers from among the folk methods. To clean the toilet bowl from rust and deposits, ammonia is mixed with hydrogen peroxide in the proportion of 100 ml of peroxide to 5 ml of ammonia. The resulting solution is poured over the spots and left for half an hour.
Hydrogen peroxide is used to remove rust
Another effective, but highly controversial, way to clean the toilet of rust, urinary stones and plaque is to apply electrolyte to car batteries.
Electrolyte for removing rust in the toilet
The electrolyte is recommended as a powerful tool that can remove all the pollution typical of toilets, including built-up, old ones. But if you have plastic pipes, then in no case should you use electrolyte, otherwise, instead of stains, you will have a question with the repair of pipes.
Anti-rust toothpaste in the toilet
The next remedy in the category of folk advice is the use of toothpaste. It is recommended to spread the paste on the stain and leave it for a while. The effectiveness of cleaning is unlikely, extracting such an idea from their piggy banks, advisers immediately make a reservation that the method can work only with light dirt, and is useless where there really is a problem spot.
Another recipe for lovers of everything extraordinary: use a Coca-Cola drink: pour the liquid into the toilet, rub with a brush. In this case, the situation is the same as with toothpaste - light dirt will be removed, difficult stains will not.
Coca-Cola to remove rust in the toilet
Choosing an effective remedy
Experienced housewives know several effective ways to combat rust at once. If you believe the reviews, phosphoric acid, vinegar and peroxide with ammonia help to cope with the problem better and faster than other means. Let's consider each of them in more detail:
Orthophosphoric acid
Tops the top of the best anti-rust agents, but requires caution.Sold in hardware stores as an 85% solution. The solution is prepared as follows: take 100 ml of acid for half a liter of water and mix thoroughly
The toilet is pre-washed with soapy water and only after that they start cleaning with acid. The solution is applied to the places of contamination and left for several hours (it may take up to 12 hours if the rust is old). At the end, you should prepare another solution, soda, (a tablespoon of soda per liter of water) and rinse the toilet with it.
Vinegar. Among the methods for removing rust, acetic acid is also in the lead. For the procedure, you will need 250 ml of 9% vinegar, which must be slightly heated in a water bath to 50 degrees. Then pour the vinegar into the toilet and add a couple of teaspoons of baking soda to it. When doing this, close the toilet lid. The procedure is good to do at night, or do not use the toilet for at least 2 - 3 hours while the reaction is going on. At the end, you need to thoroughly rinse it with water using a brush.
Hydrogen peroxide with ammonia. Here's what else you can wash rust in the toilet at home - peroxide with ammonia. The solution can be prepared in a half-liter glass jar with a lid. For 100 ml of alcohol, you need to take 50 ml of peroxide, and you need to add it to the ammonia, and not vice versa, gently pouring in the liquid in a thin stream. Then the jar should be tightly closed with a lid and shaken well. Apply the resulting solution to a cloth, treat the contaminated surface with it and leave for half an hour. After this time, the toilet should be rinsed with water.
These are the means by which you can remove rust, and they are far from the only ones. Many housewives use other methods with success. We will talk about them further.
Important! When studying how to wash rust in the toilet at home, what tools are better to use, do not forget about the cistern. If you ignore the washing of the cistern, red spots will very quickly appear on the toilet.
Turn off the water before cleaning it, and then use one of the above methods to deal with rust.
Interesting! How to quickly remove yellow stains from your bathroom
The reason for the appearance of rust
A reddish bloom appears due to the fact that the water that goes down the toilet is oversaturated with iron. Initially, getting into the water supply system, the water goes through several stages of purification, as a result of which it is freed from additional impurities. But then the water flows through old pipes, on the walls of which there is a thick layer of rust, and is enriched with iron.
In modern houses, when laying communications, preference is given to metal-plastic, polypropylene or PVC pipes, but the main city lines were laid long ago, and they consist of steel or cast-iron pipes. Over a long period of time, sediments have adhered here in a thick layer and gradually "enrich" the water streams.
Another reason why rusty deposits appear in the toilet is the porous structure of the surface. The wide pores of sanitary toilets absorb more deposits than the smooth, fine-pored glaze of earthenware and porcelain. The age of the toilet also affects - over time, the surface of any product becomes more porous, and the more often it is used, the faster it will happen.
The next reason is the float in the cistern. If it is poorly adjusted, the water flows in a continuous stream - soon this "path" acquires a characteristic yellow, and then - and reddish color. The tank itself can rust, and often in a much more noticeable volume than the toilet bowl - here the water settles, and at this time iron impurities settle on the insides of the structure.
Urinary calculus and rusty deposits in the toilet
Features of cleaning with home remedies
A variety of homemade products can help in the cleaning process for stains and streaks.They are found in almost every home, and proper use will give no worse results than the use of expensive store products. These include citric acid, acetic acid, baking soda, and even plain Coca-Cola.
The use of citric acid
It has long been known that citric acid has good whitening properties. Therefore, this product is suitable for cleaning the toilet and will allow you to get the expected result of cleanliness and freshness. 3 tablespoons of powder should be poured inside the toilet, and the same amount into the cistern, wait a few hours, and then rinse off using a brush for more effective cleaning.
Using vinegar
Vinegar is another effective toilet cleaner. 70% vinegar is best, but you can use 9% table vinegar as well. It needs to be heated before use, so a glass of liquid is poured into a saucepan and put on fire. Warm vinegar is poured into the toilet, a few tablespoons of baking soda is added there and left for several hours. After that, you can rinse off the water several times and clean the inner surface with a brush. The inside of the cistern can also be washed out with vinegar.
Baking soda
Another homemade toilet bowl cleaner is baking soda, which you can find in every home. Many housewives know that this inexpensive product helps in cleaning many dirty surfaces, including it can easily wash off any marks and stains inside the toilet. 2-3 tablespoons of white powder should be poured into water, stir it with a brush and clean the faience, leave for several hours, and then rinse well several times. Such a procedure will be enough to get clean plumbing without streaks and contamination.
Coca-Cola use
There are many different stories and warnings written about this drink, but it is well known that Coca-Cola has corrosive properties. Therefore, its use for cleaning the toilet will give a good effect. To get the desired result, you need to take a few liters of the drink, pour it into the toilet and wait a few hours. The very first rinse will show what a good detergent it is.
How to clean a toilet with Whiteness
Whiteness is another home remedy to help fight plaque and deposits on the inside of plumbing fixtures. But its use is characterized by one feature: you must first remove all the water from the sanitary ware. And this is not always as easy as we would like. A liter of Whiteness is poured into a dry toilet bowl, left for 3-4 hours, or it is possible for the whole night. Then it is washed off with the usual amount of water.
The advantage of home cleaning products is the absence of an unpleasant odor and chemical fumes, that is, cleaning is not harmful to humans.
But you still need to take precautions so that cleaning the toilet is not only effective, but also safe for your health. Such measures include the use of rubber gloves for cleaning and a sufficient distance to keep your face from the area to be cleaned.
Cleaning methods
Each housewife makes up the cleaning schedule independently. The bathroom is one of the most frequently visited rooms in the apartment, and if you do not divide the cleaning procedures into daily, weekly and monthly, this will complicate the general cleaning of the bathroom, which will be carried out from time to time.
In addition, due to daily water procedures, humid air accumulates in the bathroom, which contributes to the multiplication of bacteria, microbes and fungi on all surfaces.
spring-cleaning
If you wipe the walls and plumbing fixtures dry after using the sink and shower every day, then the classic general cleaning of the bathroom can be done once a month. The tiles will have to be washed from floor to ceiling, and therefore it is required to free up the working space as much as possible.
Before cleaning the tiles in the bathroom, you should apply detergents to particularly dirty areas and leave for 20-30 minutes to act. Only after that, you can start global cleaning of the walls in the bathroom, treating with household chemicals and areas covered with tiles and other bathroom surfaces.
Fast cleaning
You can quickly clean the tiles in the bathroom after taking a shower. Under the influence of steam generated during the hygienic procedure, dirt and plaque on the tiles will get wet, and they can be easily removed with any gentle detergent composition or even just a soft cloth or sponge. All surfaces should then be wiped dry.
If the surfaces do not become shiny after such a quick cleaning, it means that a deposit has formed on the ceramic tiles. To get rid of it, you need special professional or home-made tile cleaners.
The use of chlorine-containing compounds is allowed. They quickly remove limescale from excessively hard water and rust. In addition, chlorine compounds are suitable not only for cleaning tiles, but also for antibacterial surface treatment in the bathroom.
Folk remedies
It is not for nothing that we grouped household chemicals according to the principle of action, because acids and alkalis can be used not only in the form of professional rust cleaners. So, what methods does popular thought offer, not alien to the knowledge of chemical reactions?
Oxalic acid
Instructions:
- We put acid on a cloth.
- Wipe off the rust stain.
- Leave for 7-10 minutes and rinse off.
If the contamination is very strong, then mix oxalic acid with a solution of hydrochloric acid in a 1: 1 ratio, apply it with three brushes and leave for 20-30 minutes. All that remains is to wash it off. Just keep in mind that if the system has plastic pipes, this method is not suitable.
You can enhance the effect of oxalic acid by adding hydrochloric acid, but only if the pipes are not metal
Car battery electrolyte
- Apply to pollution.
- We wait 15 minutes and wash off.
It should be remembered that working with electrolytes can be hazardous to health, therefore, safety precautions must be followed. A person working with this dangerous substance must have serviceable overalls and protective equipment. Overalls should be made of thick wool, not corroded by electrolyte, rubber boots, gloves, an apron and goggles are required.
Electrolyte is considered the most effective rust remover.
Vinegar essence and soda
This method is suitable for those who are alien to cars and do not know where oxalic acid is sold (by the way, you can find it in hardware stores), but he is well versed in baking. The method of application does not differ from that described above with an electrolyte. However, the popular cleansing hit "vinegar + soda" is more often used.
Instructions:
- We heat 1 glass of 70% vinegar to a temperature of 45 degrees.
- Add 1 tablespoon of baking soda.
- We apply to the problem area. If we are talking about the area under the rim, then for convenience we use a bottle with a narrow spout.
- Rinse off after 10-12 hours.
- We repeat the procedure until the rust disappears.
Soda enhances the effect of vinegar essence
Hydrogen peroxide and ammonia
Instructions:
- We make a mixture of hydrogen peroxide and ammonia in a ratio of 1: 5.
- Apply to dirty areas.
- After half an hour, rubbing the dirt with a brush, wash off.
Lemon acid
Citric acid is the most affordable tool for removing rust stains from the toilet, though not the most effective.
It should be noted that this method is only suitable if the rust spots are fresh and not too large.
Instructions:
- Pour lemon on a rag.
- We wipe the pollution.
- Leave for 1–1.5 hours and rinse off.
Another method suitable for fresh small stains: apply the paste to the rust, three times and rinse off after half an hour.
Cola and other carbonated drinks
Only fresh stains can be removed with drinks.
Instructions:
-
Pour 1 liter of cola to the problem area. If we are talking about a tank or an area under the rim, then you need to soak a rag with Sprite, attach it.
- We leave for 1 hour.
- We wash off with water.
Prevention measures
There are several ways to prevent rust:
- 1If the problem is related to poor quality water, then it is recommended to install a filter.
- 2First of all, adjust your toilet tank so that no water flows out of it. You can do this yourself. To do this, bend the lever of the float in the tank. This technique will reduce the amount of water used.
- 3 The use of special agents for water in the tank: they come in the form of soluble tablets, powder or solution. Such compositions paint water in a pleasant color, freshen the air, and prevent the formation of rust and other deposits.
- 4 It is recommended to replace the faience toilet bowl with a new analogue, as dirt and rust settle faster on a rough surface and penetrate deeper. At the same time, it is recommended to buy plumbing fixtures with a special water-repellent glaze.
- 5When choosing plumbing, preference should be given to products coated with a water-repellent substance. They are more expensive than conventional ones, but they effectively prevent dirt and rusty deposits from settling on the walls of the toilet.
- 6In the event of minor breakdowns, they should be eliminated in a timely manner.
- 7 It is easier to remove fresh stains than outdated ones, so it is advisable to constantly clean the toilet and keep the toilet clean.
If you follow the above recommendations, the toilet will shine clean and will last a long time.
Folk remedies
Folk recipes are no less effective in cleaning the toilet, their use in many cases is safer than removing rust from the toilet with professional chemistry.
Folk remedies can be no less effective than household chemicals.
Vinegar
This is the most popular folk toilet cleaning solution. In its pure form, vinegar does an excellent job of removing smudges. To do this, it must be applied to a dry surface with contamination and left for 10 minutes or more. It is possible to determine the beginning of the action of the agent visually - when the contamination “floated”, it is possible to flush it. If the result was not achieved the first time, you can repeat the above procedure.
Among folk remedies, vinegar is the most popular.
Alcohol
Alcohol can only remove shallow contaminants, it is more effective for prevention than for thorough cleaning of the toilet. Also, due to the high volatility, a much higher amount of alcohol may be required compared to other methods.
Only surface contamination can be removed with alcohol.
Ammonia
The cleaning result can be enhanced by adding hydrogen peroxide to the ammonia. Both of these substances are readily available in pharmacies. The working solution is obtained from the ratio of 1 part of ammonia to 20 parts of peroxide, applied to a sponge and rust is removed. In most cases, ammonia copes perfectly with small and did not have time to grow old.
The ammonia copes well with light dirt.
Oxalic acid
Oxalic acid is used in powder form. It is applied and left in this form for an hour. Then you need to wipe off the dirt with a sponge, rinsing off the residue with water. When using this acid, be careful not to inhale the vapors or get the product on the skin.
Oxalic acid is a rather aggressive agent, so you need to use it carefully.
Hydrochloric acid
The most aggressive and dangerous, but at the same time the most effective rust remover. It copes with even the most chronic divorces in 5-10 minutes. However, when working with this acid, it is necessary to protect not only the hands, but also the eyes, as well as the respiratory system.
Hydrochloric acid is the most effective, but also dangerous substance.You need to work with her in full protection.
Toothpaste
Paste in the case of slight contamination allows you to quickly eliminate it. We apply it on the rust and leave it for 30-50 minutes, after which we thoroughly process the surface with a soft metal sponge and wash off the remnants of the product.
The toothpaste gently removes small impurities.
Lemon acid
A fairly effective acid that destroys not only rust, but also urinary stone and lime from the surface of faience. The best result can be achieved by first leaving the acid on the surface of the contamination for a while. Then we process it with a sponge and rinse it off.
Citric acid fights not only rust, but also other contaminants.
Carbonated drinks
The use of the most common soda is justified for light contamination.
It is important that the drink contains phosphoric acid, which allows cleaning. We wash the toilet with soda, leave for 30-40 minutes, rinse
Together with rust I can leave and lime deposits.
To deal with rust, soda must have phosphoric acid.
Cleansing with folk remedies
At home, you can use improvised acid and alkaline substances: soda, vinegar, citric acid or juice.
Soda with vinegar
The inside of the toilet is white-cleaned in several homemade ways using vinegar and baking soda. With their help, you can remove not only rusty smudges from the toilet, but also yellowish urinary stones.
Method 1:
- 1 cup vinegar essence or table vinegar is heated to 45 ° C.
- Mixed with 1 tbsp. l. soda.
- If the product is prepared from 9% vinegar, then a few drops of iodine must be added to the prepared mixture.
- The resulting composition is applied to the plumbing problem area. If you need to clean the toilet under the rim, then use a container with a narrow opening.
- Leave for up to 12 hours.
- Wash off with water.
- If you are not satisfied with the result, the procedure is repeated the required number of times.
Method 2:
- Pour half a glass of soda into the toilet.
- Then it is carefully poured with vinegar.
- The hissing mass is spread with a brush over the entire inner surface of the toilet bowl.
- Wait half an hour, clean the dirt well with a brush.
- Rinse with water.
Baking soda
It belongs to soft abrasives and has a safe action. A gruel is prepared from soda and water, which is applied to an area with rusty stains. After drying, the product is washed off with water.
Table vinegar
To wash the plumbing, they are abundantly impregnated with a cloth napkin and well moistened with rusty marks. Leave for half an hour or an hour, then rinse with water.
In this way, it is effective to clean a stepped toilet ("with an oblique outlet"). Water is preliminarily removed from the top of the bowl, and during soaking, the drained vinegar is periodically raised and distributed again along the walls.
Ammonia and hydrogen peroxide
They are used in a manner similar to vinegar:
- Peroxide and ammonia are mixed in a 1: 5 ratio.
- The agent is applied to the pollution.
- After waiting half an hour, rub with a brush and rinse with water.
The ammonia has a pungent odor, therefore, be sure to turn on the hood or ventilation amplifier, and cover the nose and mouth with a medical mask, or better with a respirator.
Lemon acid
Its crystals are more effective than vinegar, and the product does not drain off the walls as quickly. Clean with lemon in two ways.
Method 1:
- Powder of citric acid is poured onto a napkin.
- Wipe off a pre-moistened rust stain.
- Leave for up to an hour and a half;
- Rinse with water.
Method 2 - if you need to remove rusty deposits and yellow stones:
- Several sachets of acid are poured into the toilet.
- Leave for 10-12 hours. The urinary stone softens and lends itself to cleansing.
- Rub with a brush and rinse with water.
Oxalic acid powder
Many housewives call this substance the most rust cleaner.
The powder is used like this:
- Apply to a surface moistened with water by rubbing in.
- Leave for half an hour.
- Wash with water.
"Whiteness" and other chlorine-containing bleaches
Chlorine bleaches are also used to remove limescale. The toilet bowl is cleaned white when applied.
Method 1:
- The liquid composition is poured onto the contaminated surface.
- Leave overnight and then wash off.
Method 2 is radical, but quick:
Alkaline powder (for example, "Sanitary") wipe the inside of the toilet, paying special attention to rusty streaks.
Leave for 5-10 minutes.
Pour "Whiteness" into the toilet bowl and wipe all surfaces and drain, distributing the bleach over the powder.
Rinse well with water.
Carbonated drinks
"Pepsi", "Coca-Cola", "Sprite", others dissolve limescale and remove fresh streaks of rust.
Cleaning methods:
- The drink is poured into the toilet. If you need to clean the plumbing under the rim, soak a napkin with soda and apply it to the place with pollution.
- Leave for an hour.
- Rinse with water.
Toothpaste
It is advisable to take whitening and without color blotches. Toothpaste is a mild abrasive agent and only helps to get rid of fresh dirt. Her
Mode of application:
- The paste is rubbed into a damp, dirty surface.
- Leave for half an hour.
- Wash off with water.
