How to wash plastic window sills at home

Plastic type

Everyone knows that there are expensive and cheap plastic windows. And almost no one thinks about how they are so different. Whichever model the buyer chooses, it will in any case be made of PVC (polyvinyl chloride). The material from different manufacturers differs only in the amount of plasticizers - the lack of these components leads to the fact that the plastic becomes brittle and brittle. So expensive models are more durable.

If we talk directly about window sills, then they differ in surface film. And it can be roughly divided into three categories - economy, standard and luxury. For the economical series, the window sills are covered with the same PVC. It's cheap and reliable as long as you don't scratch or stain the surface too much. For standard models, melamine film is used. It is more resistant to damage and detergents and can even withstand a smoldering cigarette without visible consequences. Luxury series window sills are covered with melamine resin - this is a durable and environmentally friendly material with high resistance to damage and aggressive environments.

How will this information be useful when you need to know how to clean a plastic window sill? Everything is simple here - the higher the category, the wider the range of funds you can use. In addition, this information is useful at the planning stage - on more expensive models, dirt practically does not linger and does not eat into the surface, it is easier to wash them.

How to whiten a windowsill

If your white plastic sill has faded, you can restore it to its original appearance with white laundry detergent. You can do it like this:

1. First, you need to dilute the powder with water to a gruel state.
2. The resulting paste must be applied to the windowsill with a sponge. If there are old stains on the surface, it is recommended to wipe them with a hard surface of a sponge. The cleaning agent must be left on the surface for 10 minutes.
3. Then it is necessary to wash off the remains of the powder with plenty of clean warm water. Immediately after this, you will need to wipe the plastic with paper towels. In no case should you leave traces of the product on it - gray spots may appear.

Video: how can you wash the windowsill?

You can also clean a light-colored window sill at home with regular remnants. To do this, you need to take a half-liter jar, fill it up to half with remnants and fill them with warm water. Next, you need to wait until these remnants dissolve, apply the resulting mixture on the windowsill, wipe the surface well and wash off the remaining soap with clean water.

How to properly wash plastic windows at home

Nowadays, the presence of plastic windows is no longer a rarity, both in apartments and in private houses. There are several reasons for this. First of all, they are light, they keep warm well inside the premises. Secondly, such windows perfectly suppress the noise coming from the streets of big cities and beyond.

A wide selection of plastic windows allows you to create an unusual interior. But in order for such structures to retain their appearance as long as possible, proper care is necessary. Therefore, today we will consider in more detail how to wash plastic windows at home, as well as window sills.

Basic tips for caring for plastic windows

For those owners who have recently installed plastic frames and double-glazed windows, it is worth paying attention to several important points for their operation.

Since all joints and gaps are filled with polyurethane foam. And the time for the foam to completely solidify usually lasts a day or two. Therefore, it is not worthwhile to immediately clean the room.
Also note that all windows and window sills must be covered with a protective film.

It is important not to leave it for a long time, and immediately remove it, after the repair work in the room has been completed.
Rubber seals are used for a tight connection between the profile and the glass unit. Regular cleaning and treatment of accumulated dust and dirt is imperative to maintain elasticity and warmth in the room and the penetration of cold air.

And many will agree that it is much easier and faster to spend half an hour of time 2 times a year than to repair them later, spending much more. Moreover, they require money to call specialists at home.

Proper care of the hardware will extend its service life. It is the handles and holders that bear all the mechanical stress, which is very high during operation.

It is necessary to lubricate the hinges, moving joints with special machine oil.

The mosquito net is a summer part, but it also needs maintenance. For the winter, it must be removed from the windows and stored in a dry, ventilated room.

Cleaning the mosquito net is quite simple. In soapy water, wash gently with a cloth, rinse and dry under a shower stream.

• Often, improper operation of structures and maintenance of them leads to disruption of their work.
• To prevent such cases, it is necessary to wash the windows from dust and dirt twice a year and carry out preventive maintenance in time, if necessary. That is, change the rubber inserts, lubricate the hinges.

Cleaning products - how to clean plastic windowsills?

All plastic cleaning products can be roughly divided into two main groups: factory products and folk recipes. The former are effective, but require additional costs, the latter are less effective, but practically free, since the right ingredients are always at hand.

Among the factory products, there are even special cleaners for plastic window sills and frames. However, if you look at it, what makes them special is the absence of reagents harmful to plastic - solvents, acetone, acids. They soften the plastic and lead to the formation of microcracks, from where small dust particles can hardly be washed away.

It is also important that the composition of the products does not contain abrasive particles that can scratch the surface.

Digging through the store shelves, you will find many products that are promoted, such as detergents for dishes, bathroom floors or walls - the content is the same, only the advertising is different. Agree, buying a whole can of a special cleaner for two or three window sills is simply unprofitable. Therefore, experienced repairmen and housewives prefer universal products such as Domestos, Mister Proper, Komet and cheaper analogs.

Folk recipes are not as effective and require a lot of physical effort and time to clean. However, they have a significant advantage - many products are safe for children, do not pollute the air with harmful chemical compounds, do not emit vapors and do not leave marks on the surface. In addition, such a detergent can be prepared, if not free of charge, then very inexpensively.

Ammonium, citric acid, baking soda or mustard cannot be applied to plastic windowsills! They can leave behind micro-scratches or lead to cracks. It is very easy to prepare a solution - grate a piece of any soap (40-50 g) and dilute in a small amount of warm water until it is completely dissolved. The higher the concentration, the better. You can do the same with washing powder, the main thing is that the grains are completely dissolved.

How to clean after repair

During repair and construction work, substances such as polyurethane foam, whitewash, primer, putty, plaster, sealant, liquid nails can get on the windowsill. It is better to clean the surface while the dirt is fresh, stubborn stains are more difficult to wipe off.

Removing plugs

A large amount of dirt accumulates under the plugs installed at the ends of the window sill, so they must be removed before cleaning. The window sill is thoroughly washed, removing all the remnants of building materials, dust and dirt, the plugs are washed separately, and then installed back.

Abrasives for primers, putties and other building residues

First, the surface is washed with a damp cloth and soapy water, some of the stains can be easily removed, especially if they are fresh. For example, whitewash, uncured putty and plaster are washed off with plain water. If the gentle method did not help return the cleanliness of the windowsill, the dirt will need to be scraped off. In this case, it is necessary to act as carefully as possible so as not to damage the surface.

Stiff brush for the remains of polyurethane foam

You can try to dissolve the polyurethane foam with vinegar, warm vegetable oil, the medicine "Dimexid"

The dried foam is carefully cut off with a spatula, trying not to scratch the surface, the residues are carefully scraped off with a stiff brush

How to whiten yellowness

The window sill can lose its whiteness and acquire an ugly yellowish color. Often you can get rid of yellowness, but for this you need to determine why it appeared. If the color change is the result of accumulated dust, dirt and particles of yellowish grease, then the window sill just needs to be washed well.

Identifying the cause

The reason that the window sill has turned yellow may be due to the poor-quality material from which the surface is made. In this case, yellowness cannot be eliminated. If the color change is caused by exposure to sunlight, temperature and humidity changes, the situation is corrected using time-tested means.

Using rubbing alcohol

Alcohol is applied to the surface for a quarter of an hour, then washed off with water. If necessary, the procedure is repeated several times. Likewise, hydrogen peroxide and oxygen bleach can be used in place of alcohol.

Soda ash with detergent powder

To whiten the surface, you can use a mixture of soda ash and washing powder, for which the substances are taken in equal proportions. The bleaching composition is applied to the material for several hours, after which it is removed with a damp sponge.

Acetone

Acetone is a dangerous product for plastics. The thinner will whiten the surface, but may damage it by dissolving the top layer of plastic along with the dirt.

Folk ways to clean windows

Traces of glue, film, scotch tape are removed by vegetable oil. 10-15 minutes after application, the contaminated area should be wiped off with a napkin and treated with dishwashing detergent.

Soap solution will cope with the remains of the plaster. To completely eliminate contamination, it is recommended to wash the surface with soapy water several times, otherwise streaks will remain.

Traces of the mounting film can be easily removed with nail polish remover. The surface with the stain must first be heated with hot air. For this, a regular hair dryer may also work.

Old stains are removed with baking soda and vinegar. Soda applied to the problem area is removed with a sponge dipped in vinegar. Dilution of vinegar in water is recommended.

Stuck dirt on the glass will not be a problem if you use a solution of 1 liter of water and 3 tablespoons of chalk or tooth powder. First, the solution is applied to individual spots and allowed to soak, then wipe with a sponge soaked in the same solution.

The absence of streaks on the glass is achieved by using a solution of 1 liter of water and 1 tablespoon of starch. The enemy of mold is a solution of 1 liter of water, 100 milliliters of bleach and 100 milliliters of copper sulfate.

Home care rules

To keep the surface of the windowsill clean and tidy, it is necessary to carry out regular maintenance, without waiting for the accumulation of dirt.In addition, there are several simple rules, following which, cleanliness and hygiene can always be maintained at the proper level.

Do not put hot pots and pans

Do not put hot dishes on the plastic, this can deform the material and change its color. If you can't do without using the window sill as a workspace, then you need to use special coasters for hot. They will prevent the surface from deformation and the appearance of fatal stains.

Using special stands for flowers

Decorative napkins are placed under the flower pots, or the plant is placed in a beautiful planter. This will help to avoid the appearance of yellow spots that form due to water falling on the windowsill after watering indoor plants. In addition, decorative elements will give the window and the whole room a cozy look.

Daily wiping with a dry cloth

Even if there are no visible traces of contamination, it is necessary to wipe the plastic with a dry cloth every day. This will help remove fine dust so that it does not clog into the pores and give the surface a dirty gray color.

Wash weekly with soapy water

At least once a week, the window sill must be washed with soapy water; ordinary laundry soap is suitable for its manufacture. In this way, accumulated dust and dirt is washed away, preventing the appearance of stubborn stains.

Regular window cleaning

To maintain cleanliness, it is necessary to regularly wash the glass and frame, paying particular attention to the lower gap between the window and the sill. Dust and dirt accumulate in the crevices, which can stain the window sill.

Checking detergents

If you plan to use a product for cleaning that has not been used before, you first need to test it on an inconspicuous area. If the surface is not deformed or discolored, the entire window sill can be cleaned.

Careful use of abrasive products

Cleaning powders should be used with great care as they leave scratches where dust and dirt can accumulate. If it is possible to do with other means, it is better to avoid the use of abrasives altogether.

How to wash plastic windows

It is possible to wash a plastic window at home using both store-bought and self-prepared products. Both options help to get rid of stains and dirt relatively quickly.

How to wash double-glazed windows

The following products help to clean windows streak-free:

• "Mister Muscle";
• Formula 409;
• "Sanita" (effective in removing difficult stains);
• "Frosch" (removes polyurethane foam);
• "White cat" (a cloth soaked in a special composition can wash plastic and glass);
• "Mister Proper" (used for washing from common types of pollution);
• gel "Komet" (able to wash glass and plastic from fat).

It is recommended to use dishwashing detergent or soap solution to remove fresh dirt. To get rid of marks on the glass help:

• lemon juice or acid;
• alcohol (1 tbsp. l. per glass of water);
• table vinegar and ammonia (a tablespoon per glass of water);
• table vinegar and liquid soap (2 tablespoons and 0.5 tsp per glass of water).

What to use to wash plastic

It will not be difficult to wash plastic windows from dirt if you use the following means:

1. CLIN. Alcohol-containing liquid with which you can wash old dirt.
2. CIF. Able to clean stubborn stains and get rid of soot.
3. Synergetic. A natural remedy for various types of dirt. Helps to clean a plastic window without the use of abrasives.

Unlike glass, plastic under the influence of the external environment (mainly sunlight) acquires a yellow tint over time. To whiten the frame and PVC window sills help:

1. Laundry soap. Half of the bar must be dissolved in hot water. Then the resulting mixture must be applied to yellow stains and kept for half an hour.At the end, the plastic must be rinsed with plain water.
2. Washing powder and soda. Both components in the amount of one tablespoon must be mixed in a liter of water. Then the product is applied to the problem area, left overnight and washed off. Similarly, you can clean the plastic frame from soot and grime.
3. Hydrogen peroxide. To return the white color to the plastic, it is enough to wipe the yellowness with this liquid.

It is not recommended to remove yellowness with bleach, as some of these detergents contain substances that corrode plastic. White spirit, medical alcohol (vodka) and soda mixed with water to a creamy state help to clean the material from glue residues.

How to wash with folk remedies

The sill of plastic windows can be washed not only with specialized means, but also with folk methods. This is primarily:

• Diluted vinegar solution.
• Chalk with toothpaste.
• A solution of vinegar with soda powder.
• Laundry soap.
• Washing powder.
• Ethanol.

Let's consider their application in more detail.

Diluted vinegar solution

Stubborn dirt, rust, greasy stains and yellowness can be more effective than any detergent used to wash diluted table vinegar from the windowsill. Instructions:

1. Dilute vinegar in water in a 1: 1 ratio.
2. Blot a clean, dry cloth with the solution.
3. Wipe the dirty area.
4. After 20 minutes, rinse with water and wipe dry.

Chalk with toothpaste

Thanks to its abrasive properties, a 1: 1 mixture of chalk powder and toothpaste can clean almost any stain. In addition, after processing, the white tone of the window sill surface is updated. The method is as follows:

1. Mix 10 grams of chalk powder and regular toothpaste evenly.
2. Spread the mixture over the dirty area of ​​the windowsill.
3. Rub it off with a damp cloth.
4. Rinse off with plain water and walk with a damp sponge.

Vinegar solution with soda powder

Long-standing stains that have eaten into the window sill can be easily washed off with soda and vinegar. The technique is as follows:

1. Sprinkle baking soda over the desired area.
2. Rub it thoroughly with a vinegar-soaked sponge.
3. Rinse with water and wipe dry.

The contact time of soda with plastic should not last longer than 4–5 minutes. Due to its chemical activity, it will noticeably whiten the window sill at the point of contact.

Laundry soap

From yellowed areas, plaque and soot, the window sill can be cleaned by means of households diluted in water. soap. For this purpose, follow these steps:

1. A tablespoon of households. dissolve soap in a glass of boiling water.
2. Blot a rag with this compound and treat stains on the windowsill.

Detergent powder

A solution of ordinary powder for washing clothes helps to wipe the window sill from yellowing and return it to its original color. It must be diluted at the rate of 5-7 grams per half liter of water. Next, you just need to wash the dirty area and wipe it dry.

Ethanol

With the help of concentrated medical alcohol, you can wash off not only the most old dirt, but also the outer layer of the window sill

Therefore, you need to handle it very carefully and in rare cases

How to wash

There are different products to choose from to remove dirt and stains from the surface. It is better to start with the most gentle methods, washing with a simple soapy solution and a sponge, if they do not help, move on to stronger means.

Laundry soap

Any soap is suitable for cleaning the windowsill, both in the form of a bar or liquid. But it should be remembered that ordinary laundry soap, despite its unassuming appearance and smell, is more effective due to its greater concentration. A soapy solution is prepared by rubbing a bar of soap on a grater, but it may be enough to lather a sponge. After cleaning, the surface is washed with clean water.

Washing powder

Washing powder will not only clean the surface, but can also restore its whiteness if you choose a powder with a whitening effect.A little cleaning agent is poured onto the windowsill, wiped with a damp sponge, starting with more severe dirt, then washed off with clean water. The powder can damage the PVC coated surface if it is rubbed firmly with the hard side of the sponge.

Window cleaner

Glass cleaner can be used to clean not only windows, but also window sills, and it can even cope with old greasy stains. The liquid is sprayed with a spray bottle and then washed with a damp cloth. To remove stubborn dirt, the product is sprayed and left to act for a few minutes. Use with care in the kitchen, avoiding splashes on food.

Vinegar

A solution of vinegar and water, diluted in equal proportions, is used to clean and lightly bleach white windowsills. On surfaces covered with colored PVC film, it is better not to use the agent in order to avoid color loss.

The vinegar solution is applied for 10-15 minutes, paying special attention to the stains, after which it is washed off with water and wiped dry. If from the first time the product has not completely coped with the dirt, the treatment is repeated

Melamine sponge

The advantage of the melamine sponge is that it does not require any detergents, just water is enough. To clean the windowsill, the sponge must be wetted and wiped off; to remove old stains, you will need to make an effort, the melamine crumbs are removed with a damp cloth.

PVC paste

To prepare a paste, you must thoroughly crush white chalk and mix it with the same amount of tooth powder. The mixture is spread over the surface with a sponge soaked in water and left to remove the dirt, then washed off with clean water. Apply carefully so that the chalk crumbs do not scratch the material. If visible contamination remains, the procedure is repeated.

A mixture of vinegar and baking soda to remove stubborn stains

A thin layer of soda is applied to the surface, a few drops of vinegar are added at the place of contamination. During the reaction, the visible signs of which are hissing and foaming, the dirt is removed. The method should not be overused as it is quite aggressive.

How to remove dirt from a white window sill?

White PVC window sills look very presentable and can remain so for almost an eternity, if you follow the simple rules of caring for them. But it happens that the snow-white surface has acquired various types of contamination, and then several recommendations should be followed on how to remove contamination from the white window sill.

Fresh stains and smudges on windowsills can be removed with cleaning products that are labeled as suitable for plastic surfaces. Glass cleaners are also great, as many of them contain alcohol. With this tool and a fiber cloth, you can effectively remove stains from a white window sill.

You can return the former snow-white look to the windowsill with the help of washing powder for white things. To do this, you need to make a gruel of a thick consistency, apply to the surface, rub with the hard side of the sponge, you can leave it for ten minutes if the dirt is old. After that, rinse off with plenty of warm water and wipe with a porous sponge so that it absorbs excess moisture, then wipe dry with paper towels.

Almost every housewife has small pieces of remnants. You shouldn't throw them away. Fill a half-liter jar with such remnants halfway and add a glass of hot water to thoroughly dissolve. The prepared gruel can also be used to clean the white windowsill from dirt. A very good and economical option as you do not spend a dime on buying cleaning products.

An effective and proven remedy is the use of chalk and tooth powder in order to remove dirt from the white plastic window sill. Since these products are the most delicate abrasive, it is impossible to spoil the surface. It is very simple to prepare this mixture for cleaning: mix a tablespoon of powder or chalk with a tablespoon of warm water, if necessary, you can add a little more liquid so that the gruel turns out like thick sour cream. We apply this composition to the windowsill and rub it with a dry sponge, you can leave it for 15 minutes for more effective bleaching of the plastic. After drying, remove the remaining powder and dust with a damp fiber cloth and wipe the windowsill dry with napkins or a cloth.

This film can be transparent or have a different color. It is varnished and easy to wash. It will protect your white windowsill from dirt and will help you easily cope with the problem of dust and kitchen soot.

An excellent and proven tool for cleaning a white window sill from old dirt is the well-known baking soda (sodium bicarbonate) and 9% table vinegar (or vinegar essence). This procedure must be carried out with rubber gloves, as vinegar can damage the skin of the hands. Baking soda should be poured over the dirty areas of the white window sill, or it should be applied to the entire surface to whiten it. In the meantime, it is necessary to soak the sponge with table vinegar and carefully treat the contaminated surface. The reaction between baking soda and vinegar will perfectly destroy old stains or a thick layer of oily soot and effectively cleanse the white plastic windowsill.

In order to clean the white windowsill from dirt, do not use products that may contain acids and alkalis, as they destroy the structure of PVC. It is not recommended to use products that contain aggressive abrasive particles to avoid surface damage. The best way is to use a soft sponge or fiber cloth.

Why do you need to adjust plastic windows

Adjusting the plastic window reduces the noise level and contributes to good sound insulation. According to the advice of professionals, these manipulations must be done 2 times a year: in spring and autumn.

Why is it important to do this? The time spent on adjustment is only 15-20 minutes, it will save the window from failure. The flaps are adjusted by switching the mechanism to winter mode in autumn, and to summer mode in spring.

This can be done by changing the position of the clamp and adjusting the degree of pressing the flaps to the profile.

The flaps are adjusted by switching the mechanism to winter mode in autumn, and to summer mode in spring. This can be done by changing the position of the clamp and adjusting the degree of pressing the flaps to the profile.

During temperature changes, the window profile can change its physical properties. Therefore, in winter, the material narrows and weakens the density of pressing it against the sash. And in summer, when heated in the sun, the profile expands, which causes friction of the sash.

In addition to seasonal adjustment, it is also made when needed. For example, if the handles of a window door are loosened, you can tighten the fasteners for a snug fit.

Or the door leaf sagged and began to touch the frame, close poorly or cold air began to penetrate, then you can set the correct position using a hexagon. He raise or lower the door relative to the profile.

Household chemicals on guard of cleanliness: choosing how to clean plastic windows and window sills

When figuring out how to wash a plastic window sill, you should never forget about the most important thing, that is, from the very household chemicals that the modern market offers to each, without exception, consumer. Moreover, the choice is so wide that an unprepared person's eyes can really scatter.In fact, let's take a look at at least the most popular and well-known detergents used by housewives around the world.

Mr. Proper - clean and fast?

If you purchase this particular tool, then you do not have to think separately how to wash the plastic window sills when the glass has already been cleaned and polished, since it is intended for complex cleaning of the entire window structure. Moreover, you can purchase Mr. Proper in the form of a gel, or it can be in the form of a powdery agent that contains abrasive particles.

It is clear that a gel or cream is suitable for any surface, but the powder must be chosen with particular care. If the plastic of the window has a gloss, then abrasives can damage its gloss, leave micro-scratches, that is, it is not recommended to use powdered substances with abrasives for this, even with rather strong pollution. Mr. Proper will help to cope even with strong dirt, it is enough to leave it on the surface for a couple of minutes, and then just wipe the window with a clean soft cloth, and the job is done, everything will go away and be washed off.

Sanita ensures cleanliness in the kitchen

When it comes to thinking about how to clean the plastic window sill in the kitchen, where fat particles are constantly deposited on all surfaces, and other consequences of cooking in the form of stains and other things do not want to just move away from plastic surfaces, a tool with the beautiful name Sanita will help. She is able to easily remove soot and dirt, because many housewives have long found her, among thousands of others.

However, due to its alcohol-containing composition, the product turned out to be quite caustic, and its smell is very strong. Needless to say, the windows must be kept open when washing, but hands must be protected with thick rubber gloves so that aggressive chemicals do not corrode the skin. Moreover, you don't have to rub much, it will be enough to leave the product for fifteen to twenty minutes and everything can be easily removed with an ordinary sponge.

When surfaces are gentle, "Pemolux" will help

You won't have to worry about how to clean a plastic window sill with a glossy surface, but still with insufficiently strong contamination, if you choose a domestically produced product called Pemolux. It has a fairly gentle composition, and also does not have an overly pungent odor, but smells fresh and a little soap.

In view of the harmlessness of the tool, it can be used even without the notorious gloves, but be prepared that even the dirt that is a little harder that is ingrained will not be washed off by it, and you will have to turn to "heavy artillery" again. "Pemolux" is produced in the form of a cream, and for glossy surfaces that can never be scratched or even wiped off, this is the best solution.

Cillit Bang specially for plastic surfaces

If we are talking about how to figure out how to clean a plastic window sill from yellowness, then you should pay attention to such a unique composition as Cillit Bang, specially designed to make it easier for housewives to care for plastic. It is sold in a container with a spray bottle, so it is very easy to apply it to stains and dirt.

Just spray the product, after fifteen minutes wipe it with a cloth, but you need to rinse it off with plenty of warm water.

Here you will have to observe all precautions, protect the skin and eyes from the contact with caustic cleaning agents, and also be sure to open all windows when applying. Leaning over the windowsill and washing it, it makes sense even to hold your breath, since the fumes can damage and burn the airways, creating a chemical lesion that is difficult to heal and takes a long time to heal

But the effectiveness of this tool is simply transcendental, Cillit Bang will cope with almost any stain without any problems.

How to clean plastic windows streak-free

Previously, the hostesses suffered for a long time, removing the windows from dirt or dust and after that removing traces of stains. Today the situation has changed for the better, because the chemical market offers a huge number of household products designed to care for surfaces made of any materials.

Tip: in order to wash plastic windows without streaks, do it in the evening so that the moisture does not have time to dry out quickly in the sun, forming a film. In this case, it is advisable to use aids that are convenient for you to work with: pieces of newspaper or old rags. However, it is best to purchase special cloths made from fabrics that do not leave streaks on the glass, such as "wet suede", from hardware stores. To keep the glass perfectly clean, be sure to use a glass cleaner (cut).

In order not to miss streaks on glasses or uncleaned areas, wash them in this way:

1. From the inside from bottom to top.
2. From the outside from right to left.

Useful tools for cleaning windowsill

Sometimes it may be necessary to use additional tools to get rid of certain types of contamination:

A construction hair dryer will help remove adhered protective film, sticky tape or scotch tape. Fresh sticky products come off without much difficulty, but if the adhesive base has lasted more than 3 months on the surface, it is not easy to tear it off. The adhesive tape is heated with a hairdryer, gently pulled by the edge, and the remnants of the glue on the windowsill can be washed off with alcohol, WD-40, Antiskotch, Label off, Duty Scotch, and other means for removing stickers;
a rubber spatula may be needed to remove dried construction foam, putty, sealant, liquid nails, frozen building mixtures that accidentally fell on the windowsill during the repair process

A metal spatula will damage a smooth base, and a rubber spatula will damage a soft one, remove dirt carefully, without scratching the product;
microfiber cloths are soft, ideal for washing smooth PVC items. Delicate fabric will not scratch the surface, will not leave streaks, will not harm the gloss;
melamine sponge is made of crystals of the same name, has unique properties

The product perfectly cleans plastic products and other materials. Using a melamine sponge, you can easily remove rust, marker, ink, difficult dirt.

Step-by-step cleansing scheme

1. First of all, it is necessary to remove large construction waste. It is advisable to remove the plugs if they are not glued on. Remove dust with a dry cloth. It is better to use an old jersey T-shirt, it is soft and will not scratch the plastic.
2. After removing the main dirt, you should walk over the surface with a wet cloth to moisten and control the removal of dust residues. Now you can apply the cleaning agent and let it work for 20 minutes.
3. After the time has elapsed, it is necessary to rinse the reagent with warm water, rinsing the cloth several times.
4. Finish cleaning by wiping dry with a soft, absorbent cloth.

To preserve the appearance of a PVC window sill, before starting the repair, you need to cover it with polyethylene or paper, try not to step on it, do not use metal scrapers and hard brushes for cleaning, do not use aggressive compounds, strong solvents.

The article has been verified by the editors