AEG PS 254 L
This powerful miter saw is originally from Romania. Industrial class, purpose - large-scale production. The two-kilowatt motor is built for tough, daily work. It is a brush type, well protected from voltage surges, overloads and overheating. The built-in feed allows you to cut 30 cm wide ends. The cutting depth is 9 cm. When the cutting head is tilted, the parameter decreases to 5 cm. The saw wheel is large, with frequent teeth. Easily handles solid, bulky workpieces. The frame is cast, reinforced. The manufacturer has expanded the capabilities and range of rotation, installed clamps, clamps, comfortable handles for fixing indicators. In addition to the laser, there is also an LED illumination of the working area. Together with a convenient scale, they enable extremely precise sawing. The cutting height limiter makes it possible to make grooves in parts. Built-in professional dust extraction system
Pros:
- The dust suction turbine draws in 80% of the swarf and dust;
- Convenient lock for corner sawing;
- 48-tooth disc included for extremely clean trimming.
Minuses:
The diameter of the table is not large.
Inexpensive miter saws
Among the instruments in the price segment up to 10 thousand rubles. 3 saws can be distinguished, which have mediocre, but quite sufficient characteristics for home use.
Bison ZPT-210 - 1400 l
A small saw ideal for cutting small to medium workpieces. Adjustable 47 * left / right table for fixing and laser marking allow you to perform any type of sawing: straight, oblique, oblique. Due to its low weight, the tool can be conveniently transported between the cottage, house and garage.
Advantages:
- Compactness.
- Strong bed.
- Automatic guard to protect the operator's hands.
- Extended feet to prevent the tool from tipping over.
Disadvantages:
- Low-power motor.
- The location for the drain has been poorly chosen, which is why most of the sawdust flies by.
- The laser lens is constantly clogged with sawdust.
- The included cutter is not suitable for cutting hard materials such as MDF.
Hammer STL1400 / 210
The Hammer saw is designed for cutting wood and aluminum profiles. Despite the low power (1400 W), the engine delivers up to 5000 rpm at high loads. The rotary table provides comfortable sawing of the workpiece at an adjustable angle. For comfortable work, the tool is equipped with a protective shield and a dust collector.
Pros:
- Ergonomic handle.
- High-quality assembly (parts fit well, kerf width does not steal material).
- Durability under moderate stress.
Minuses:
- It makes a loud noise (100-122 dB).
- The set includes only one clamp, which is not enough to firmly fix the workpiece.
Metabo KS 216 M Lasercut
The Metabo miter saw is suitable for ripping, cross cuts and miter cuts (single and double). The tool is equipped with a bag for collecting chips and convenient carrying handles. In 2017, this model was finalized taking into account the wishes of customers. In particular, the laser illumination has been moved to a different location, and now it is not clogged with sawdust during operation.
Advantages:
- No backlash.
- Precise cut angles.
Disadvantages:
Relatively heavy.
Middle class cross-cut
These tools are the most popular in the market. They can be used both for solving everyday tasks and for professional work.
Hammer STL1200 / 210C
The Czech combination saw with an additional sawing table is ideal for processing wood up to 60 mm thick.Convenience of work is achieved due to high-quality assembly, a properly functioning dust collector and a decent disc travel height (12 and 5.5 cm).
Advantages:
- Durability.
- Ergonomic
- Does not jam at high speeds.
Disadvantages:
- Poor cutting accuracy (the locking screw moves the rotary table during the tightening process).
- Lightweight bed, due to which the tool must be additionally supported during operation.
Makita LS1040F
Saw Makita has a simple and functional design. The aluminum delivery table is equipped with a high precision ruler. The chip outlet is located in the right place, so that the working area is always clean. The protective cover is made of transparent plastic for excellent visibility. These advantages, in combination with a powerful motor and a 255 mm disc, guarantee high quality work with wood, plastic, chipboard and aluminum.
Pros:
- Turn the slab 52 * to the right and 45 * to the left.
- Exact cut.
- Durability.
Minuses:
There is no soft start.
Bosch PCM 8 S
The Bosch fly-through saw features an economical and responsive engine and a double guide rail for workpieces up to 282 mm wide. The aluminum housing, adjustable laser beam and high-quality dust collector ensure a comfortable working environment for the operator.
Advantages:
- Precise markings.
- Perfect angle setting.
Disadvantages:
- Dim laser.
- Lack of precise cut when re-broaching.
- High price.
The best professional miter saws
Such models are premium and usually cost more than 15,000 rubles. They are convenient to use, safe for humans and versatile - they are used for various types of cuts. Their choice from manufacturers is not as wide as in the case of budget models and mid-range options. Of the 10 offers in the TOP, 4 tools are included, the best according to customer reviews.
Makita LS1216
The device is not cheap and belongs to the professional options due to its capabilities. The tool easily tilts vertically to the right and left sides at an angle from 0 to 45º, in a horizontal position - up to 52-60º. A well-thought-out engine braking system and a soft start mechanism are responsible for the safety and efficiency of use, which does not allow the product to fail. Instead of two long guides, the model uses 4 short guides for making bevel, cross and longitudinal cuts.
Dignity
- Deep inclination of the disc with the possibility of fixing;
- Structural strength;
- Sharp disc;
- Low noise level;
- High-quality assembly;
- Does not heat up;
- Cuts neatly.
disadvantages
- Lack of laser cut mark;
- Idling - 3200 rpm.
The Makita LS1216 model weighs 26.3 kg and, in fact, is a full-fledged machine for professional use, however, some difficulties may arise with its movement.
Bosch GCM 8 SJL
This is a cheaper option compared to the previous one, although in terms of functionality it does not lose. The improved two-point dust extraction system guarantees high quality and ease of use. The ability to cut horizontally by 31.2 cm allows the device to be used at different angles and for processing long workpieces. Accurate results are ensured by laser marking and side broaches. The tool handles grooves well due to its limited depth. The product is quite easy to transport due to the built-in handle, although it weighs 18 kg.
Dignity
- Good performance;
- Rotation speed - 5500 rpm;
- Power - 1600 W;
- Flexibility to adjust the angle of inclination;
- Excellent dust extraction;
- Work surface cleanliness.
disadvantages
Not found.
DeWALT DW717XPS
This miter saw is considered to be the best for ripping purposes, although it does a great job with rip saws as well. It is efficient for both light and difficult jobs thanks to its powerful 1675 W motor. However, even under high load, the motor does not heat up and lasts long enough, according to reviews.An interesting model makes it possible to control the working line thanks to the shadow from the disc. The XPS system, which is responsible for this, does not require adjustments and guarantees the accuracy of placing the material in the right place, as well as good surface visibility.
Dignity
- Disc with 60 teeth;
- The key for him is in the set;
- Roomy dust collector;
- Saws at an angle of 90 degrees to a depth of 15.2 cm;
- Cutting element diameter - 25 cm;
- Stability on the surface;
- Idling parameters - 4000 rpm.
disadvantages
Weight 23 kg.
Metabo KGS 315 Plus
The device is included in the rating due to its high performance, which can be attributed to the powerful 2200 W motor, as well as due to the speed of up to 4100 per minute. If necessary, this parameter can be adjusted, which allows you to choose the best value for cutting plastic, wood or aluminum profiles. Long workpieces are conveniently processed due to the broaching mechanism. Working with the saw is quite simple, in particular because there is no sawdust left on the surface.
Dignity
- Expansion of the table;
- Aiming laser for improved cutting quality;
- High stops;
- Increased disk sizes;
- Easy replacement of the cutting element;
- Performs a large amount of work.
disadvantages
Poorly sucks up chips.
Hammer STL1800 / 305PL for professionals
The combination miter saw allows you to make straight, bevel, oblique cuts and combine different types of cuts. Works with wood and timber materials. The 1800 W engine develops idle speed at 5000 rpm. and rotates a 305 mm diameter disc with a 30 mm bore.
The cutting blade is the largest in the overview, therefore the cutting depth is also the greatest - 110 mm. It is adjusted downward, so cutting out the grooves is easy. The width of the cut also has a good value - 315 mm, due to the presence of a broach. In case of overload, protection is triggered - it is implemented in the electronic control unit.
For the operator's safety, a switch-on lock is provided - unauthorized start-up is excluded. The same goal is facilitated by a stable base that does not allow jerks and jumps of the cutting unit. The spindle lock function helps to eliminate injury when changing the disc.
The laser marker indicates the direction of the cut and helps you make a precise cut. The built-in dust collector is responsible for the cleanliness of the working area. Connection of an external vacuum cleaner is possible.
Suitable for industrial environments, for working with furniture, for private construction.
Customers appreciate the performance of the saw under heavy loads and intensive work. Many consider it an advantage of the model to be accurate in keeping to the cutting angles.
Best inexpensive miter saws
On average, the cost of such products is 6000-10,000 rubles, usually their power is 1000-1500 watts. These options are suitable for home applications where speed and performance are not the most important parameters. There are not very many inexpensive devices on the market, and 4 models were selected from the analyzed proposals.
Hammer STL1400 / 210
The powerful Hammer STL1400 / 210 saw is designed for long cuts in wood and machining aluminum profiles. With its help, the cut is made exactly in any direction - straight, obliquely, at an angle. This is facilitated by a special base for holding the material. The model is equipped with a work table with optimal dimensions and a rotating surface, which makes its use more efficient and comfortable. For the manufacture of the base, durable aluminum was taken.
Advantages:
- Rotation speed - 5000 rpm;
- Power - 1400 W;
- Can be connected to a vacuum cleaner;
- Good equipment;
- Deep disc entrance;
- Considerable dust collector.
Disadvantages:
The inexpensive Hammer STL1400 / 210 miter saw has several cutting depths, which depend on the angle of inclination of the blade: at 45 ° it is 3 cm, at 90 ° - 5.5 cm, and the cutting width is 12 cm.
Bison ZPT-210 - 1400 l
It is a compact miter saw that makes it easy to work with both large and small workpieces. The set includes a table for fixing the device, if necessary, its position can be easily changed by 47 degrees to the left and right. The disc of the model is sharp and cuts accurately, but it is not able to cope with a thickness of more than 60 mm. For high-quality performance of work, the manufacturer has provided laser illumination of the cutting line stroke. The device operates at a power of 1300 W and with such parameters it separates well not only wood, while the disc diameter is 21 cm, which reduces the time.
Advantages:
- Low noise level;
- Ease of installation;
- Ease of transportation;
- Does not chip at the disc exit;
- Saws excellently, even at different angles.
Disadvantages:
- Weight 6 kg;
- Not instant dust removal.
The reviews indicate that when working with blanks, the canvas does not go to the side, but it still takes time to get used to the laser marker.
Caliber PTE-1750/255-Am
Saw "Caliber PTE-1750/255-Am" is designed for cutting plastic, not thick aluminum, wooden blanks. The device does its job perfectly both at oblique angles and in the straight position of the cutting blade. It is protected from overheating by built-in ventilation, which prevents premature failure. It is convenient to use it due to the possibility of changing the position of the table, which is carried out using a convenient handle and a clear scale. The model is suitable for both hobbyists and professionals who need a worthy alternative to a sawing machine.
Advantages:
- Cutting depth - 70 mm;
- Power 1750 W;
- Disk rotation speed - 6000 rpm;
- Effective dust removal system;
- Ease of controls;
- High build quality.
Disadvantages:
- Weight 13.6 kg;
- Cutting width - 13.6 cm.
Metabo KS 216 M Lasercut
A compact, affordable miter saw that is easy to carry in one hand. If necessary, the device can easily change the cutting disc, there is a preliminary spindle lock. All controls are visible and easy to use. The saw head tilts to the left for more accurate and efficient back cuts. The work is carried out safely due to the high supports that move to the side. The support extends for machining long workpieces. The model operates from the mains, the accuracy of the results is guaranteed by laser marking of the cut line.
Advantages:
- Long dust suction channel, which improves the efficiency of its collection;
- Fast and easy setup;
- Ease of transportation;
- Cast construction;
- Cable length 2 m;
- The number of revolutions is up to 5000 per minute.
Disadvantages:
The dimensions of the support surface of the device are 155 x 725 mm, so long workpieces can also be freely placed on it. The width of the cut varies on average from 80 to 120 mm, depending on the angle of the disc.