Subtleties of repair
Regardless of the quality and reliability of the screwdriver, the user sooner or later has to face the need for repair.
Among the main reasons:
- breakage of the power button;
- the need to replace the battery;
- the presence of an incomprehensible knock or squeak;
- the engine burned out;
- the ability to adjust the speed has disappeared;
- reverse does not switch;
- the device is constantly turned off.
In the absence of the necessary experience, it is better to take such equipment to a professional so that he eliminates the cause of the breakdown.
If you want to fix the problem yourself, then you should take into account the following nuances:
- during repairs, a tester may be needed to check the operation of the battery and other parts of the screwdriver;
- the user must have knowledge in the field of electronics;
- all components are assembled in the same order as they were located before;
- burnt or melted contacts must be replaced.
In the next video you will find an overview, description and technical characteristics of the Enkor AccuMaster AKM1805 cordless drill-driver.
Let’s block ads! (Why?)
Rechargeable
Battery equipment is actively used at construction sites that are de-energized. The range of application of the tool is quite wide and is not inferior to that presented in the category of network equipment.
The company "Enkor" offers a modern lineup:
- AKM 1801 - great for home use. It is easy to use, the instructions are intuitive. This is a great solution for beginners, the handle design is thought out in such a way that the tool is comfortable to hold. The rechargeable battery can be easily removed, charged in a few hours, standard connectors are suitable for this.
- AKM 1802 is a more professional model, in the design of which the manufacturer has provided two speeds. It easily copes with complex tasks, perfectly demonstrates itself when drilling holes of small diameter. Provides surprisingly accurate drilling thanks to its special spindle design.
- AKM 1803 - is characterized not only by two speeds, but also by a chuck with an increased diameter, which makes it possible to use a tooling on which a 13 mm cylindrical shank is installed.
- AKM 1805 is a tool that can rightfully be called professional, since it can cope with the most difficult task. The four-pole motor provides high torque, combined with a powerful gearbox, this screwdriver can handle the heaviest loads.
Network
Enkor offers a good range of network screwdrivers with different shank diameters and power:
- DSHE 280ER / 10 - the Enkor electric screwdriver is characterized by a maximum shank diameter of 10 mm and a minimum of 8 mm. The power of the equipment is 280 W, this is the weakest equipment in its category.
- DShE-2 350ER / 10 with a power of 350 W, has the same minimum and maximum shank size as the previously described model.
- DShE-2 ER / 10 with a power of 1100 W, allows a maximum shank diameter of 10 mm, a minimum of 8 mm.
- DSHE-240ER / 10 with the same indicators, except for the power, this screwdriver has 240 watts.
Main scope of use:
- collection of furniture;
- finishing work;
- roofing;
- any installation work.