How to apply?
Since the "grinder" is a multifunctional tool that can process not only metal alloys, but also polymers, ceramics and wood, as well as durable raw materials (concrete, brick or stone), it is important to operate the equipment correctly. As for the joint performance of work with the rack, it is important to use only high-quality and serviceable cutting discs in the work, on which the result of the planned work will depend.
The angle grinder itself must be attached to the rack as securely as possible - this moment must be monitored before each start of the unit. In this form, the "grinder" turns into a stationary circular saw. All workpieces for cutting are fed to it in the same way. During handling of materials, the operator must hold the tool without distortion. Special attention should be paid to the locking button, which does not need to be clamped after activating the equipment, since this can complicate emergency shutdown if necessary.
When working with an electric grinder on the stand, securely fix the power cord from the unit using plastic clips, since its free position on the floor surface can lead to a traumatic situation during the operation of the tool and the operator's movements with materials and workpieces. Fastening is best done to the moving part of the bed.
For information on how to make a do-it-yourself grinder stand, see the next video.
Selection Tips
In the course of the selection of an auxiliary device for the "grinder", it is first of all to decide on the question of the compatibility of the rack with the diameter of the disks with which the angle grinder works
It is important that the entire rack structure is fully compatible with the existing cutting and grinding tool. Therefore, you can go shopping together with the operated unit.
As practice shows, pendulum struts are especially effective when working with ceramics, wood or metal, with the help of which a wide range of tasks can be realized, in addition, they are quite simple in design and operation.
Models and their characteristics
In light of the large variety of racks for grinders available on the construction market from domestic and foreign manufacturers, it is worth considering the most demanded of them.
Stands for angle grinder TM Vitals
Products of a universal sample, which can be jointly operated by the consumer not only with the grinders of this brand, but also with any other similar tool. The device works with cutting discs, the diameter of which ranges from 125 mm to 230 mm.
With the stand, you can cut to a depth of 30-70 mm, with a cut width of 100 to 180 mm. Thanks to the work with the stand, you can work with material at an angle of 0 to 45 degrees. Depending on the modification, the rack can weigh from 2.9 kilograms to 5 kilograms. The manufacturer offers an auxiliary element with base dimensions: 185x235 mm, 285x277 mm, 336x350 mm.
DIOLD C-12550011030
This model of the stand can work with tools with discs with a diameter of 125 mm. The dimensions of the bed surface are 250x250 mm. The stand model is recommended for cutting pipes with a cross-sectional area up to 35 mm. On such a device, you can work at an angle from 0 to 45 degrees. The mass of products in the basic configuration is 2 kilograms.
D115 KWB 7782-00
The stand is designed to work with discs with a diameter of 115 and 150 mm. The model has a protective cover and a solid base with a clamping system for working materials. The products have small dimensions, and the base of the stand itself is made in the shape of a square, which facilitates its stability.
INTERTOOL ST-0002
Multifunctional stand, which is compatible with grinders with a disc diameter from 115 mm to 125 mm. Suitable for household use. The device facilitates the work of the master, has a reliable fastening, therefore it is used to perform serial work with materials of various samples. Rack cuts can be cut from 0 to 45 degrees.
Advantages and disadvantages
For an objective understanding of the functionality of the racks under the "grinder", you should consider their positive features.
- In the course of work, you can accurately position the workpiece on the fixture. This detail is important for making very accurate cuts on hard and soft materials.
- In the process of operating an angle grinder on a universal bed, the risk of injury hazardous situations is reduced, since the fixed tool will work with precise movements of the cutting element.
- By using the rack for all sorts of construction, manufacturing, or repair tasks, you can increase productivity and speed up your work tasks.
- If you install and fix a workpiece or structure made of wood or other material, then the quality of operations with the object will increase significantly.
- Stands for "grinder" for cutting metal will allow the operator to place the workpiece at the desired angle. This can be done quickly and accurately. A vice will be very useful in this case.
- The bed makes it possible to work with any type of raw material.
- Most of the platforms allow you to fix the working element not only horizontally, but also vertically. Such a positive feature is relevant for prefabricated structures, with which the master performs manipulations without preliminary disassembly.
- The work of the master is greatly facilitated, since the material will be securely fixed on the device, and it will not need to be held.
- Racks can be used in a small workshop and in everyday life. There is also the possibility of creating homemade auxiliary elements.
However, this mechanism also has some disadvantages:
- the device is not suitable for serious production facilities;
- there are a large number of low-quality Asian products on the market, which complicates the choice of quality goods;
- over time, backlash may appear in the structure, which will require the operator to pay special attention to the serviceability of the device;
- some racks are made of low quality metal, so they quickly deteriorate.
What it is?
In the course of construction or repair tasks, it becomes necessary to carry out the most even cutting of the raw materials used. A tool such as a "grinder" can cope with the task, but its implementation complicates the feature of the tool, which stands out for its monotony - as a result, the operator's hand may not be able to cope with holding a rather heavy device in the required position for a long time. In this case, the way out of this situation will be the installation of a special stationary support for the tool, which is the stand for the angle grinder.
Such a holder makes it possible for a master in a domestic environment or in a production workshop to quickly and at no extra cost turn the angle grinder into a multifunctional cut-off saw, and in the future use all the advantages that result from this.In this case, the main positive feature is the high accuracy of the cut, in addition, the operation of the grinder and the overall safety of the operations performed with metal, polymer, wood or other raw materials are greatly facilitated.
By its design properties, the tool holder is a very simple device, consisting of a base made of a durable metal alloy with a pendulum-type mechanism installed on it, on which there are special areas for reliable fixation of the device, handle and protective casing. And also a rotary system for the correct positioning of the working material in relation to the grinder at a given angle.
Usually the same companies that offer angle grinders on the market are engaged in the production and sale of racks for "grinders". Some products are additionally equipped with some useful tools, for example, a set of stands or a bench vise. As a useful functionality in the bed for "grinders" it is worth highlighting the presence of an angular or standard ruler, in addition, manufacturers of modern tool supports equip their models with a return spring mechanism.
In order to have the most complete understanding of the functionality of the racks for the "grinder", you should consider situations when the installation of this auxiliary device is rational.
- The bed is necessary for cutting or grinding structural parts or assembled structures, the raw materials for the manufacture of which are difficult-to-machine materials. Also, the expediency of acquiring or making an independent inventory is determined by the need to work with materials of a large area.
- The stand will need to be made on the material, if necessary, using a "grinder" of precise cuts up to a millimeter when using discs of small diameter.
- To help the master in everyday life or in the professional field, the bed will turn out to be during work related to the processing of several elements with the same parameters.
In the course of selecting a particular model of a tripod for angle grinders, first of all, the diameter of the working disk, with which the machine can perform its tasks, is taken into account. The need to select a support model based on this parameter is due to the fact that the device will be able to function only with the stand, whose diameter will correspond to the same size of the cutting disc in the tool
