Champion st1170bs snow blower. review, instructions, reviews

Snow blower Champion ST1170E

For most of our fellow citizens, the existence of household snow removal equipment is not new, rather it is a necessity due to constant care for the territories adjacent to a residential building, organization or supermarket. The larger the organization, the larger the parking, wider and longer entrances and exits and approaches ...

Snow blower Champion ST1170E

In conditions of constant snowfalls, this machine is indispensable, but which snowblower to choose, because there are many manufacturers whose equipment deserves attention? Let's dwell on the Champion ST1170E snowblower of an American manufacturer, but of a Chinese assembly.

Advantages and disadvantages

Among the advantages and disadvantages of Champion snow blowers are the same features that are inherent in snow blowers in general. At the same time, there are pluses relating specifically to the company's products.

• The high power of the machines allows you to work on large areas.
• Since American-made parts are used, there is no doubt about the quality.
• The stable demand for equipment indicates that there are no complaints about both quality and convenience.
• Champion snow throwers have some of the most reliable motors on the market.
• Gasoline engines are powerful enough to clean large areas. It is the cars with such motors that are chosen by the utilities.
• Almost all models have both manual and electric start systems.

There are not many disadvantages. The first of them refers to electric snowblowers. They are not very powerful and are only suitable for cleaning small areas: narrow paths, porches. At the same time, such devices can be used to clean hard-to-reach places, as they are compact and maneuverable. The second drawback relates to rare repairs that may still be required by machines. Genuine parts are not easy to obtain and can be costly to repair.

Snow blower Champion ST656

Today it is difficult to imagine a rural or country house without assistants, in the form of small-sized garden equipment. She helps with renovation and construction, garden maintenance and watering of trees. But when winter comes, many are looking for a shovel in the old fashioned way to remove the snow. Champion is ready to offer its customers a reliable assistant: the Champion snow blower ST656.

Snow blower Champion ST656

The developer of this snow blower is Champion, a multinational company whose main production facilities are located in China. However, the ST656 model is assembled mainly from American and Japanese components, which significantly improves the quality of the unit.

Device and principle of operation

Champion snow blowers have a design similar to those of other manufacturers.

The largest part is the body, inside which the motor is located. Typically, air-filtered engines are used in snow blowers. There is also a spark plug. The motor can be started with both an electric and a manual starter

The oil level sensor is also connected here.
Special attention should be paid to the carburetor. Be sure to take the time to set it up so that the machine will work properly in the future.
There is a bucket in the front

In it, with the help of shear bolts, an auger is fixed, which rotates, rakes and grinds the snow mass.
At the back there is a frame on which the controls (chute swing lever, launch system, and others) are located.
On the sides of the body there are either wheels or tracks so that the snow blower can move. Only self-propelled snow throwers have caterpillars.
A chute is placed on top for ejection of snow. Typically, the chute can be adjusted.

The principle of operation is that the device, moving forward, rakes in the snow mass, grinds it and throws it out through the chute in the right direction

It is important to be careful and watch where the snow is being dropped. There should be no people, animals, cars, valuables, as stones and debris can get into the bucket along with snow

Thrown out with great force, they can injure someone or damage someone's property.

Troubleshooting

If any of the breakdowns described below is detected, it is necessary to identify the cause of the malfunction for further manipulations.

Schematic diagram of the Champion ST656BS snow blower

Common breakdowns are:

• A sharp loss of power of the unit.
• Inability to start the engine.
• A sharp loss of speed.
• Strong vibration from the snow blower.
• The auger has stopped rotating.
• Problems with the inclusion of gears.
• The drive lever is depressed and there is no movement.

A sharp loss of power of a working snow blower, reasons:

• Unit muffler is clogged with carbon deposits. The action required is to clean the muffler or replace it.
• "Take more, throw further, while it flies - rest." It is this tactic of working with a snow blower that contributes to a decrease in power and an increase in the load on the motor. Too much trapped snow is detrimental to all machine systems. It is necessary to reduce the driving speed of the snow blower, thereby reducing the capture of snow. Additionally, it is necessary to adjust the slide.
• We turn to the fuel system and examine the filter, fuel supply hoses, carburetor, etc. If necessary, we clean or replace components.

Champion ST656BS engine diagram

If the engine does not want to start:

• Check if the fuel cock is open. If closed, just open it.
• The absence in the fuel tank will also prevent the engine from starting. Check the tank and refill with quality fuel. For the snow blower Champion of the ST656BS model, this is A-92 gasoline.
• Low-quality, long-term stored fuel loses its properties and therefore becomes the reason for the engine not to start. It is necessary to drain the expired gasoline and refill with fresh.
• The primer is covered. In this case, only its replacement will help.
• Magneto is out of order. Replacing the magneto will bring your Champion back to life.
• Spark plug problems. It can burn out, smoke, get wet, be incorrectly installed (no gaps are set), etc. Replacing the candle (if it is burnt out), cleaning the candle (if it is burnt out), replacing the tip of the candle (if it gets wet), and adjusting will help to correct the situation. clearance.

The reason for the sharp loss of speed of the Champion ST656BS snow blower is a worn out or simply stretched drive belt. In the first case, it is necessary to replace it, in the second - to tighten it.

If the snow blower vibrates abnormally:

• worn impeller;
• broken auger;
• loosening fasteners.

If the impeller or auger is the cause of strong vibration, then only one thing will help - their replacement. Loose fasteners (bolts and nuts) only need to be tightened with a wrench and the snow blower will work again.

The gears are included, but very badly, as if with an effort. This indicates that the clutch cable is stretched out. Replacing the cable with subsequent adjustment will help to return the snow blower to working condition.

If you see a picture when the drive lever is pressed, and there is no movement, then the cause of the breakdown is a worn friction wheel. Replacing it will solve this problem.

Peculiarities

The Champion technique is one of the most reliable. All parts for it are manufactured in the United States, and the assembly of the devices themselves can be carried out either in the United States or in China. At the same time, the Chinese assembly is not an indicator that the products are worse, since the spare parts still remain original. There is a wide range of different Champion technical devices on the market for both domestic and professional use.Snowblowers belong to one of the most demanded categories, because winters in Russia are usually snowy, but not everyone is ready to spend several hours a day on manual cleaning. This is where a mechanical snow blower comes in handy.

The assortment line of the brand includes self-propelled and non-self-propelled, gasoline and electric, wheeled and tracked vehicles - the choice is huge. In addition, the power of the overwhelming majority of snow removal equipment is such that it can be used not only in everyday life, but also for cleaning streets, roads, sidewalks. The cost of Champion units is adequate and quite consistent with the quality, which also contributes to an increase in demand for them.

User manual

When purchasing the unit, check its completeness, make sure there is no visible damage. Carefully study the manual, familiarize yourself with the rules for the maintenance and operation of the Champion ST246 snow blower.

Assembling the Champion ST246 snow blower:

• Mount the auger engaging lever;
• Secure the top of the snow thrower handle;
• Reinstall the starter handle;
• Install the outlet chute.

This snow blower runs on pure AI-92, 95 gasoline. For engine lubrication, winter oil for four-stroke air-cooled engines is used: Champion SAE30 / SAE5W30 / SAE10W40.

Launching the Champion ST246 snow blower:

• Pour gasoline into the fuel tank;
• Pour oil into the engine crankcase and check its level;
• Check the reliability of fastening of all units and parts, make sure that the control levers are in good working order;
• Make sure there are no oil and gasoline smudges under the snow thrower:
• Set the required angles of rotation of the outlet chute;
• Start the engine;

Snow blower device Champion ST246

Recommendations for starting a cold engine:

• Insert the ignition key;
• Move the choke lever to the “Closed” position;
• Pump the fuel using a hand pump (3-5 clicks are enough);
• Crank the engine crankshaft with a recoil starter until resistance, then release the cable down and pull it sharply towards you;
• Open the choke and let the engine idle for 2-3 minutes.
• Lower the auger to the surface and the snow thrower will move. Raise the auger to stop the unit;
• Observe a moderate speed of movement, choosing it depending on the height and density of the snow cover;
• Wear anti-slip footwear, safety goggles or a mask when working.

• At the end of the work, use the drive lever to stop the auger rotation;
• Let the engine run for 1-2 minutes at idle speed, then turn it off;
• Clean the unit from snow, ice and debris;
• Store the Champion ST246 snow blower in a dry, ventilated area. At the end of the season, drain oil and gasoline and lubricate the snow thrower.

It is not recommended to run the engine in idle without load. After running-in, be sure to drain the oil and refill with fresh oil.

When running in, do not overload the snow blower and work at maximum speed for a long time.

User manual

You have acquired a rather complex device, the safe operation of which will require certain knowledge and special skills from you. The knowledge gained will help protect yourself and your loved ones from injury and extend the life of the snow blower.

Schematic diagram of the Champion ST656 snow blower

Instructions before starting the Champion ST656 snow blower:

• Study the safety rules when working with self-propelled devices on a gasoline engine;
• Before starting operation, carefully study the device of the snow blower;
• Familiarize yourself with and remember the location of the levers and buttons to control the unit;
• Direct the discharge so that snow does not fall on other people, windows and walls of houses, cars, animals. Remember that in addition to snow, stones and other objects can fly out of the chute.
• It is forbidden to transfer control of the snow blower Champion st656 to children and persons who are not familiar with the operation of the unit;
• When operating the unit, wear protective goggles or a mask, non-slip footwear and tight, well-fitting clothing;

Replacing the belt

No matter how competently you operate the equipment, from time to time, even the most reliable machines have malfunctions. One of the common breakdowns of a snow blower is a broken or worn belt. Repairs can be performed both in a service workshop and at home.

Snow blower belt replacement

Changing the belt on the Champion ST656 snow blower:

• Loosen the drive of the auger or wheels, depending on which belt you are changing;
• Unscrew the bolts and remove the protective cover of the belt drives;
• Dismantle the engine pulley;
• Unscrew the bolts securing the auger body to the frame and separate the snow blower parts;
• Remove the damaged belt;
• Install a new belt;
• Carry out the assembly operation of the snow blower in the reverse order;

Description

In terms of its characteristics, this unit is as close as possible to professional equipment, but it belongs to household appliances. Its weight is no longer 50-70 kg, as in its previous models, but 135 kg.

Champion G390HK engine

Performance (engine power) is not 5.5-6.5 liters. with., and 11 l. with. Greater bucket grip, extended throw range (up to 15 m), powerful wheel drive with deep treads - all this and much more make this machine indispensable in our yards.

With the help of a snow blower, you can remove the snow cover:

• freshly fallen;
• stale;
• ice;
• dense crust, etc.

The four-stroke, single-cylinder engine of the Champion ST1170E snow thrower is additionally equipped with an air-cooled function, which increases the duration of work with the snow thrower. The recommended fuel is 92 octane gasoline.

The motor is started in two ways:

• From the 220V electrical network (there is a special plug).
• Manually, thanks to a special handle.

This alternative start allows the snow blower to be operated in a variety of conditions, with or without access to the mains.

Description

This self-propelled model is equipped with a four-stroke engine (5.5 hp). The device has an air cooling function, which allows you to use the device for many hours without overheating the engine. The snowplow is equipped with modern 12 "tires with aggressive self-cleaning tread, which, in combination with a powerful engine, makes it possible to remove even stale and icy crust.

Main engine controls

To facilitate starting, which is carried out with a recoil starter, the snow thrower is equipped with a primer that will quickly start the engine at the lowest temperatures. The speed is set using a special lever, the unit has 4 forward and 2 reverse gears.

Auger Champion ST556

The high performance of the device is ensured by a high-quality two-blade serrated auger, which undermines even melted and stale snow and throws it at a distance of up to 8 meters.

Model Champion ST556 Features & Benefits:

• Light weight (62.5 kg.) And compact dimensions (63 * 84 * 63 cm.);
• Powerful, unpretentious air-cooled four-stroke engine;
• Quality auger with metal blades;
• Self-cleaning aggressive tire tread for increased flotation of the snow blower;
• Low fuel consumption (0.8 l / h);
• High maneuverability, the ability to turn in one place;

Snow blower Champion ST1376E

The Champion ST1376E snow blower is a powerful unit equipped with a 13 horsepower four-stroke single-cylinder petrol engine.

Snow blower Champion ST1376E

The air cooling function of the motor allows the Champion ST1376E to run several times longer. It is recommended to use gasoline with an octane rating of 92 or more as fuel for the snow blower.

The launch is carried out in two ways:

• Manually - just use the recoil starter by pulling the appropriate handle.
• From the 220 V mains - the electric starter is connected with a plug to the mains and the “start” button is pressed.

The Champion ST1376E model is equipped with a wheel drive with powerful treads, which provide reliable grip of the snow blower to the ground, prevent slipping and slipping. The high maneuverability of the Champion snow blower is ensured by a differential lock.

Champion G390HK engine

The presence of eight speeds has improved the operational characteristics of the unit, now the gearbox has 6 forward and 2 reverse speeds. The heated grips were also not superfluous, adding comfort to the operator even in the fiercest cold.

A 15 W headlight is capable of sufficiently brightly illuminating the section of the path in front of the snow blower so that the area is cleaned as efficiently as possible.

The unit removes various types of snow cover:

• freshly fallen;
• stale:
• melted;
• crust;
• ice, etc.

Powerful serrated auger blades easily cut even an icy crust, after which the impeller crushes the ice and throws it out with snow masses. A special lever allows you to adjust the bucket lift, offering three positions, one of which is used only for transporting the snow blower to the work site.

The chute deflector is also adjustable, throwing snow masses in the desired direction at a certain angle.

Snow blower Champion ST1170E

Every year, new models of snow throwers appear on the snow blower market, which greatly simplify the life of their owners. In recent years, the Champion ST1170E snow blower has become very popular. Equipped with a powerful engine, this model is able to cope with the most difficult tasks of clearing both fresh and stale snow. It can be used both for clearing private yards, driveways, and for clearing snow from sidewalks, park alleys, pedestrian streets, courtyards of apartment buildings and public buildings.

Snow blower Champion ST1170E

Champion is a Russian brand, the company declared itself on the market of gardening and farm equipment in 2005. The production facilities of the concern are located in China. However, the latter circumstance in no way affected the quality of the instruments produced. It should be borne in mind that the Champion company closely cooperates with other well-known manufacturers of garden equipment, purchasing components for their products from them.