Peculiarities
Let's take a look at Hammer products using the Snowbull 2000E model as an example. This specimen is able to clear a snow embankment up to 250 mm high, in one pass the machine clears a path of 500 mm. The advantages of the model include the throwing of snow by 8 meters, as well as a long warranty from the manufacturer - 60 months. For ease of use, the equipment is equipped with two special wheels, which makes it possible to move it on the ground, and not on weight. The model has a special handle that can be adjusted to the direction of snow throwing. The distance is limited to 190 ° in front of the unit.
Thanks to the rubberized auger, the surface to be cleaned is not subject to damage and scratches, and this is very important when removing snow from a decorative path, which is important not to deform. When the technique is turned on, the lever is adjusted with two hands, which ensures an even distribution of the load on both hands
Thus, the operator gets tired more slowly from the work done. Ease of use is complemented by a folding handle. It can be folded in half, and then the equipment can easily fit in the trunk or a small outbuilding.
In a set for a snowplow, you can order related products: all ammunition, as well as shovels, extension cords and surge protectors.
The main criteria for choosing a snow blower
How to choose a snow blower for a summer residence, or a country house?
The main parameters of the electric snow blower:
- Snow depth.
- The range of the thrown snow.
- The area of the area to be cleaned.
- The ability to remove icing, packed snow (wet).
- Electric motor power.
- Unit weight.
- The cost of the car.
Depth of snow
The maximum depth of snow that an electric snow plow is able to overcome is no more than 28 cm, in contrast to gasoline ones, which can cope with a layer of up to half a meter.
Cleared track width and snow throwing distance
The track width to be cleared directly depends on the following parameters:
- Models.
- The presence of a rotor.
- Electric motor power.
- Snow throwing ranges.
There are models that have a cleared track of half a meter, but due to an insufficiently powerful engine, they are able to throw snow at a short distance - two to three meters.
The narrowing of the track allows to increase the distance of throwing snow, but the greater effect will be from the presence of a model with a rotor, and if the model is two-stage, and the engine is not even the most powerful, a good ratio of the track width and the distance of the snow being thrown is provided.
That is why snow blowers with a clearing width of more than half a meter, which are able to throw snow more than eight meters, are equipped, in addition to the auger, with a rotor.
Cleaning of ice, packed and wet snow
Not all snow blowers are able to clear packed, wet snow or ice.
The thing is that in such cases the load on the screw and rotor is greatly increased.
That is why the engine torque may not be enough - this happens more often when the power of the electric motor is below two kilowatts - and as a result, the range of the thrown snow is reduced.
If the auger is not yet covered with rubber and is made of plastic, then its wear increases dramatically and the service life decreases significantly.
The speed of its rotation also plays a significant role - the higher the speed, the more likely damage to this element. The conclusion suggests itself: in order to remove wet snow and ice, those units are needed that are equipped with a screw-rotor system and a metal auger.
Good results are shown by a rubberized plastic auger, but only if there is a rotor - such a combined system is needed in order to be able to reduce the rotational speed of the auger - this reduces the load on it and increases the service life of the unit.
Electric motor power
The engine power is of great importance, especially if the snow is wet, packed and its layer is large.
In order to clear soft, freshly fallen snow, a motor of increased power is not needed - anyone can handle it.
Wet or packed snow also puts more stress on the motor - not just on the auger, as more energy is required for cleaning.
When choosing a snow blower - if it is supposed to remove packed snow, and not just fresh - you should opt for models with a motor of more than 2 kW of power.
Unit weight
The weight of the unit is also important - a heavy cleaner is not suitable for a teenage operator, woman or pensioner - they simply do not have enough energy to clean. Of course, if we are not talking about cleaning fresh snow of small thickness.
Layer - layer, but the unit must also be delivered from its storage to the place of cleaning, and then return the thing to its "regular" place. So the weight of the cleaner can be a priority.
As a rule, the weight of such a unit varies: 15-25 kg. Based on this, you should make your choice by choosing the right model.
Price
Price is sometimes the decisive factor, not everyone is able to shell out money for an expensive brand or model.
This is largely determined by the brand, design features and where the product is made.
It is well known that famous brands are much more expensive than little-known ones:
- Honda.
- Husqvarna.
- Makita, etc.
If a product is assembled in America, Europe, Japan, then it will be one hundred percent more expensive than those made in Russia or China. So it is inappropriate to say anything about the average prices for sweepers.
In general, the price of electric snow blowers starts from about 10 thousand rubles, and the unit can be in two categories at the same time:
As a rule, most cars fit into the price up to 30 thousand rubles.
Limitations when working with electric snow blowers
There are some restrictions when working with electric sweepers. A lot has been said above about the power cable and sockets, but besides this there are also nuances:
A two-kilowatt device consumes a current of 9A - this is not so little for old wiring and not very reliable outlets.
A three-kilowatt device already takes 13 A, which is generally disastrous, given the above conditions. In addition, here it is necessary to carefully monitor the reliability of the sockets, and also a reliable connection between the cord and the motor must always be ensured.
The longer the cable, the greater the mobility of the unit, but the length of the former creates the risk of entanglement and falling under the rotor (auger). Therefore, the recommended length is 30-50 m.
Extension cords that are equipped with self-winding devices cannot be used - they are not suitable for either low temperatures or high humidity. The winding must be free on the drum so that it can be pulled freely behind the machine.
It is best to purchase a cable of the optimal length. At the end of the work it is necessary to wind up the cable manually.
The socket on the extension cord must be moisture and frost resistant.
Types of snow blowers
So, snowblowers are divided into gasoline and electric - the difference is in the type of engine.
By design - one- and two-stage.
By type of movement:
- Self-propelled. In this case, the tracks or wheels are rotated by the engine.
- Non-self-propelled. The movement takes place due to the muscular efforts of the operator.
By weight, these units are subdivided:
- Lungs.
- Average.
- Heavy.
The former have little power, while the latter are the most powerful.
Considering the type of use, these units can be both domestic and professional. The first and second found application for houses, summer cottages, cottages with a small area
Utilities use professional services. In addition, they are also used for cleaning:
The first and second found application for houses, summer cottages, cottages with a small area. Utilities use professional services.In addition, they are also used for cleaning:
- Katkov.
- Outdoor stadiums.
- Parking lots.
- Areas near shopping centers, offices, etc.
What material do you like the most about the house?
Log house
25.5%
Brick house
19.21%
Log house
15.13%
House of aerated concrete blocks
14.41%
Canadian technology house
11.97%
Rounded log house
4.29%
Monolithic house
4.04%
House of foam blocks
2.73%
House of vulture panels
2.73%
Votes: 2749
Additional functions
When making your choice in the ocean of electric snow blowers, it is worth paying attention to various additional functions:
- Foldable handle. Significantly reduces the overall dimensions of the machine, which is a big pole if the storage space fits into a tight space. And storage of the unit in the off-season will not interfere with the storage of other things.
- Headlight. It is especially important if cleaning has to be done after work, in the dark.
- Blocking of the electric motor or auger. It works if the operator takes his hands off the control handles - this is how the rotor can stop or the unit is completely de-energized - it all depends on the design.
- Heated handles. Gives comfort in operation - the operator's hands will not freeze.
The locking system is by no means a superfluous option, since the handles can be released for a variety of reasons.
Causes:
- The operator slipped.
- Distracted.
- He began to feel bad, or even completely lost consciousness.
So blocking has a significant impact on the safety of the harvesting machine.
Criteria for choosing the best electric snow blower: self-propelled or not?
One of the main questions faced by buyers in the selection process is whether a self-propelled electric snow blower has any advantages over models that do not have this quality. In fact, the main difference between them is that the self-propelled electric snow blower moves independently, requiring no effort from the operator.
Among the advantages of this function, they note the ability to use devices of a larger size and power, which allows cleaning large snowdrifts, as well as clearing the surface of caked snow. Also, this type of machine is capable of capturing a much greater height of snow, which is well suited for cleaning after heavy snowfall.
Buying a self-propelled electric snow blower is not a problem. Difficulties usually arise in the matter of storage and maintenance. With its rather serious dimensions, the device requires storage in a dry and warm room, as well as regular maintenance. So it is better to think about where you will store it before purchasing an electric snow blower.
Self-propelled two-stage snow blower is more powerful and easy to operate
Such machines are always two-stage, and in addition to the auger, which is responsible for crushing the snow, they are equipped with a rotor that throws it to the side. Due to this separation, the snow throwing range is much higher, and in some cases it can reach 15 m.
It is especially worth noting that recently new, three-stage snow blowers have appeared on the market, which are capable of clearing very large snowdrifts. The peculiarity of this design is that two metal augers feed the snow mass to the accelerator located in the center of the bucket. There, the snow is crushed into dust, after which it enters the pipe and is thrown at a predetermined distance.
Three-stage models of electric snow blowers are able to cope with large drifts of snow on an impressive territory
Three-stage snow blowers are distinguished by high productivity and considerable dimensions, so their use is justified in large areas. Such machines are able to cope with skids of a high level of complexity, where there is crust, icing and dense wet snow. The disadvantages include their sluggishness.
Should you buy an electric snow blower with a metal auger
On the one hand, proponents of metal augers point to their durability as well as their high efficiency. But at the same time, if the device is to be used on tiles or paving stones, it can lead to scratches or damage.
Snow plow metal auger
Features of operation
Different cars have differences in terms of features and characteristics.
The electric snow blower is designed for domestic use, unlike those used by public utilities: there is a professional class equipment and it is equipped with either gasoline or diesel engines.
In the first case, the technique is compact, economical and convenient (ease) of operation. Her characteristics, of course, are more modest, but they are quite enough for cleaning lawns, sidewalks, paths, etc.
As already mentioned, it is not intended for cleaning large areas, and as for moving it, there are significant restrictions here due to the length of the cord.
That is why utilities do not use such units.
As for private users, they have enough power and range of the snow machine. The main advantages of this technique have long been appreciated by the consumer:
- The use of electricity is more profitable than gasoline and oil - these oil products are constantly getting more expensive.
- The price of electrical units is much lower than fuel counterparts.
- Small dimensions and light weight do not require special storage conditions.
- The ease of control is captivating.
- No problem starting the engine.
- High mobility.
- The disadvantages in such units, taking into account the use by individuals, are much less than the advantages.