How to choose?
There are many recommendations for buying this product. Consumers have already been able to appreciate its quality and reliability. Among all the proposals, there are the most common ones - this is a two-wheeled construction wheelbarrow Belamos, a Vinco construction wheelbarrow, a Zubr construction wheelbarrow, a Haemmerlin construction wheelbarrow, Haemmerlin Cargo PREMIUM 90 MG.
These models are four-wheeled. They are powerful and practical to use. They have a capacity of more than 100 liters. Of course, this model should be used in more serious work, such as construction or removal of hard and heavy materials.
How much energy and precious time is saved if all the necessary, but rather heavy components (paints, sand, building mixtures) fit in one place.
So, when buying a four-wheeled car, consider the width of the body. If you need to use this device for household needs, then choose a not very wide model, since a too bulky body may not fit into some wicket or doorways.
For heavy work, purchase a product with a reinforced bottom using stiffeners. The sides of high-quality models are usually seamed. This is done to avoid injury. Before buying, check the wheel clearances. Turn the garment to one side and press down. If it sags, then the product should be discarded.
The main part of the wheelbarrow is the frame. It should be made from a single piece of pipe and be free from welds or seams. And also the frame should bend around the entire body, protecting and strengthening it.
Look at the device of the pens. Their intended length will be sufficient, and the ends are usually provided with comfortable plastic caps. If you take a closer look and “try the thing on yourself,” you will see that the height of the cart will be quite comfortable for you. Otherwise, you will quickly feel tired due to the fact that you have to "hunch over" all the time.
Wheels are: inflatable, cast, equipped with a bearing (makes the move easier). Their diameter ranges from 350 to 450 mm. Make sure that your car has this device made of high quality metal.
Construction trolleys are in full swing around the world. It remains to choose the most reliable suppliers.
See below for more details.
History
The name of the inventory comes from the ancient Slavic verb "tach" (to roll, to carry). In the 1980s, a slang form of the word appeared, denoting a car. That is, the image of a certain vehicle (conveyor) on wheels and with a body has been steadily entrenched in the popular consciousness. It is these basic structural elements that have remained unchanged for decades. But with cars for the entire time of their existence, there have been some changes.
In its simplest form, the wheelbarrow was a triangular wooden structure with one wheel in the front and a kind of loading platform made of boards, the ends of the bars extending from the wheel became handles. The need to transport a wider variety of goods gave rise to different forms of cargo containers - boxes and troughs
The increase in carrying capacity required attention to the wheels.
In some variants of wheelbarrows, they began to be placed on the sides of the cargo body. Having gained stability, such a cart lost its maneuverability; to move it, a fairly flat and wide surface was needed. Such luxury in the conditions of construction sites or a garden plot was rather difficult to provide. Such carts were also made with one drawbar at the end, a transverse crossbar was fixed on it, which actually represented the handle, there were cars with two handles attached to the sides of the body.
Why do you need it?
As follows from the description of the device, a wheelbarrow is a simple and reliable hand-held conveyor. Nature freed man's hands. Throughout their history, people have always carried something in their hands. The volumes and mass of the transferred became larger, which became a kind of incentive for technical solutions.Yes, now people move millions of tons of various goods over great distances, but the need for a universal hand conveyor does not disappear. She is satisfied with the wheelbarrow.
A modern construction wheelbarrow is a very reliable design, with the help of which you can successfully move loads up to an incredible 350 kg in weight. Even 100 years ago, this would have required harnessing a horse or a donkey to a cart. The shape of the body makes it possible to fill it with bulk cargo, for example, sand, in no less surprising volumes - 100–120 liters. Considering that a bucket contains about 10 liters, and it will weigh up to 20 kg, you can imagine what labor costs a person will expect when carrying the same volume in buckets.
Is it possible to make a garden wheelbarrow with your own hands
- The body is constructed from the sheet (butt welding).
- Then the handles and chassis are attached to the base. As a running gear, you can use wheels from a bicycle or moped.
- After carrying out all the work, the product must be primed and painted.
For our summer residents, nothing is impossible iron barrel
- First, a frame of pipes in the form of the letter A is welded.
- A wheel is mounted in the front of the structure, the remaining elements protrude in the form of handles.
- Then you need to install the body - this is the part cut along the barrel.
- The final step is to weld on the footrests to keep the wheelbarrow horizontal.
A wheelbarrow from a barrel. Photo from the site wooden wheelbarrow
- First - a frame made of wooden blocks or boards, fastened with self-tapping screws, wood glue (it all depends on what kind of cargo will be transported and how the device will be used).
- Then - the body. It is a wooden box that looks like a regular box.
- The undercarriage of the wheelbarrow will consist of a metal axle and wheels (from a bicycle, a moped, or specially purchased wheels for a wheelbarrow).
- The handle can be T-shaped, attached to the body at an angle.
- The folding step will give the garden wheelbarrow stability.
The most important thing is to carefully fasten all the elements together.
With the help of improvised means, you can build a very good garden wheelbarrow to the delight of yourself and the envy of your neighbors
What are the cars
construction garden
Construction wheelbarrow
It is mainly used in construction, although it can be adapted to carry any heavy loads. It has increased payload, more maneuverability, more weight and a higher price.
Construction wheelbarrow
The construction of a construction wheelbarrow looks like this:
- the body where the cargo is placed,
- wheel (1 or 2),
- footrests,
- 2 plastic coated handles.
- the frame is reinforced.
For the transportation of building and finishing materials, such a wheelbarrow is a loyal and reliable assistant. It can transport almost everything that is needed at the construction site: cement (including mortar), bricks, heavy tools. You just need to keep within the parameters allowed by the instructions.
For the transportation of building and finishing materials, the construction wheelbarrow is a loyal and reliable assistant
Is it possible to use a building specimen in the country? Of course yes. Even if you are not building anything, it will come in handy for transporting a large amount of black soil or sand, peat, gravel, soil for the construction of a cellar, stones for making rockeries, garden debris, and even the contents of a drain pit.
Varieties
Modern wheelbarrows can be divided into two groups.
Garden. They are light in the full sense of the word, their carrying capacity is lower, and the structural elements are thinner. Wheels can have spokes, more often garden wheelbarrows have only one wheel, sometimes there can be a pair of wheels. A trough made of plastic or thin sheet metal. Such a conveyor can be successfully used by an elderly lover of gardening work when transporting seedlings, seedlings, crops from the beds, containers with water for irrigation or a solution for treating plants from pests.
Despite the seeming simplicity and unpretentiousness, cars can be quite expensive.Even the most famous manufacturers are engaged in the release of this inventory, however, in this case, the price of the product does not at all mean some ultra-modern know-how, you often have to overpay for the brand's popularity. Cars from well-known European companies, in particular from the French brand Haemmerlin, can cost up to 7 thousand rubles. Quite high-quality Chinese and Russian counterparts in price reach 4 thousand rubles.
What are they?
Those people who are often faced with work on the land are well aware that having the right tools helps in all situations. Without a wheelbarrow, performing some of the tasks of cleaning a garden or building a barn becomes simply unrealistic.
Some summer residents prefer to buy inexpensive models that are equipped with only two wheels. As a rule, they are inexpensive, lightweight and unpretentious to use. When choosing such a product, the load on the wheel should be taken into account.
And here you need to be especially careful. To reduce the cost of production, developers often save on the main thing - on the wheel. They just use not a metal structure for the base, but a plastic one. Because of this, various breakdowns occur. As soon as the cart is overloaded, the wheel breaks in two.
Therefore, this option is suitable only for those who are not going to carry a heavy load in a trolley. For cleaning foliage and snow, this model is quite suitable. Therefore, choose more reliable products, the main parts of which are equipped with metal parts. Wheels must have the following parameters: a reliable tube made of thicker material, two powerful bearings and a disc made of durable stainless steel.
However, do not forget to take into account the stress on your spine. To start driving with a full wheelbarrow, you will need to raise it slightly. And this task can get pretty daunting. The inconvenience is that you will not only have to push the mechanism forward, but also take on your shoulders some of the heavy load.
Another thing is when the cart is equipped with three wheels. In this case, your problem will be greatly facilitated. The main load will fall not on the shoulders, but on the device itself.
Whatever the device, choose it according to your individual requests. A sufficient quantity of goods at the moment will allow you to do this without much effort.
When buying, consider the height of the model. If you are short, then any type of product will suit you. If you are tall, it will be difficult to move around the terrain with a low wheelbarrow. The explanation is simple. You will have to hunch over and adjust to this tool so as not to overturn or spill the load.
Another important fact is the special protection of the front wheel in the form of a welded frame. Most of the breakdowns occur when the soil is removed (poured out). At this moment, a special device "takes" all the load on itself, and your household item is not at risk.
Device
The modern car is the result of a lot of trial and error. Its main structural elements are as follows:
- bent frame made of steel pipe with a diameter of up to 40 mm, turning into handles; often, the bends of the frame are props that hold the wheelbarrow in an upright position during loading (unloading);
- one or two wheels located under the body;
- the cargo body can be solid or assembled from separate elements; the material can be wood (plywood), metal or plastic, and the shape of the body can be different - a solid metal or plastic version has smooth contours and is called a trough, and a prefabricated body is a box that is assembled in various ways from individual elements.
Which car is better: two-wheeled or one-wheeled
The most popular and most frequently purchased models of garden wheelbarrows are one-wheeled and two-wheeled - each of the models has its pluses and minuses, we will consider these important nuances in more detail.
Also, you should learn more about what is the best hedges and what plants are worth making them.
Unicycle
The main advantage of these products is their maneuverability. The one-wheel barrow will handle even the most difficult, uneven ground, suitable for limited areas.
One-wheel cars are very manoeuvrable
Note, however, that one wheel often gets stuck in the soil, so this option can be very inconvenient for unstable, loose soil. All the effort falls on the one who pushes the wheelbarrow, so it is very difficult to operate this device on sticky ground.
Usually a one-wheeled wheelbarrow is purchased for the transport of light loads. This device is not very stable.
You may also be interested in information on how to get rid of moss in your garden.
Two-wheeled
In this case, the opposite is true: the wheelbarrow becomes less maneuverable, however, it does not get stuck in the ground, therefore it is suitable for use on loose soil. It is much easier to move this device than a one-wheeled one. In addition, the product with two wheels is more stable and reliable.
The two-wheel barrow has a higher carrying capacity and can be used to transport bulky and heavy loads. The device, however, takes up more space, so it is difficult to operate it in small areas, to move it along winding, narrow paths.
You may also be interested in information on how the electric brush cutter is used.