DIY fruit picker

Option number 5: plastic pipe collector

Another device for difficult-to-break fruits. You should try to find a thin plastic tube that is large enough to easily pass even a large apple through. And converting it into a fruit collector is simple:

1. Make a J-shaped hole in the wall of the top of the pipe.
2. On the lower tail of the "letter", which should be facing up, secure the blade. If the stalk is stubborn, you skip it into this trap and prune the twig by lifting your device up sharply.
3. Cut the bottom edge of the pipe in the form of sharp triangular teeth.
4. Heat the pipe, after which the teeth can be easily bent to form the bottom of the container.
5. Drill holes in the thickness of the pipe through which you attach it to the pole with a wire.

Features of the device

First of all, fruit collectors are in demand among gardeners who grow fruit trees.

Such devices allow you to harvest from hard-to-reach places at a height, carefully remove damaged, overripe or even rotten fruits.

Shrub berries and wild berries are harvested with a scoop with a handle and a shutter, which turns the routine process into a pleasant and easy job.

The main principle of operation of fruit pickers is to recreate the actions performed by human hands to remove fruits from a branch. Most of these devices are equipped with various options for grasping the fruit and cutting or tearing off the stalk.

Some devices need to be constantly freed from the collected product, while others have a special bag or basket in which up to several kilograms of the collected product accumulates.

The telescopic handle makes the collection process more comfortable and quick.

Many companies produce rods with a universal diameter, suitable for many types of garden tools.

Homemade fruit picker with a bowl

For manufacturing, you will need a plastic bottle, a long wooden stick (pole or handle from a garden shovel, pitchfork, etc.), a sharp knife, scissors, self-tapping screws, a drill with drills and a screwdriver.

Build process:

1. An incision is made in the middle of the plastic bottle with a knife, the neck is cut with scissors from the neck and removed to the side. The plastic part along with the neck is neatly straightened, 2 small holes with a diameter of 3 mm are drilled on the neck opposite each other, and deep petals-teeth are cut out on the cut line;
2. The long stick is the future picker holder. One end of it must be cleaned and sanded so that it fits freely inside the plastic neck. The stick is inserted into the neck of the bottle and fixed with two self-tapping screws, which should be screwed into the holes made in the neck. The fruit collector is ready!

The device works as follows: the tool rises up to the branch with fruits so that an apple falls into the bowl. The collector is then rolled clockwise to the side until the prongs cut the fruit off the branch. As a rule, it turns out to collect 2-3 apples in one go.

Purchased apple pickers

Fruit pickers for picking apples can be made independently, using available materials for this. But it is much easier to purchase a ready-made version in a store. In this case, the gardener can choose from the following options:

• Plastic "tulip". The device is made of dense plastic, looks like a tall glass with slots at the top, giving it the resemblance to a drop-down tulip flower.Place the apple fruit collector so that the fruit is in the glass, and the stalk is in the slot between the plastic "petals". Then you need to scroll the handle around its axis, and that's it - the plucked fruit can be carefully placed in the basket. This is a very simple and convenient design. The only difficulty may arise with apples that have a too hard and durable handle.

• Wire fruit collector. The design provides for a bowl made of wire strings. It turns out something like a grip - when the apple hits it, you just need to rotate this puller around its axis, and the fruit will be ripped off. Then the fruit is carefully placed in the basket.
• The collet puller is another convenient hand-held design with a telescopic handle. This solution allows, if necessary, to adjust the length of the pole. As for the tip of the device, it is made from different materials. There are metal or plastic models on the market. There are also pullers, additionally equipped with a bag that allows you to pick several fruits at once, which greatly speeds up the process.
• Fruit collector for apples with telescopic handle and gripper. Its principle of operation is not much different from the models described above. The main advantage is the presence of a metal grip that resembles folded fingers. Thanks to this design, the collector can capture not only a large apple, but also smaller fruits.

Important! The device is not always equipped with a telescopic handle. In stores, you can find a fruit picker with a grip for apples, but at the same time with a fixed length of the handle

Therefore, before buying, this point needs to be clarified.

There are other options for collectors. For example, there are models with an additional line that allows you to grip the handle. Collet pullers can be equipped with a special knife to cut the cuttings.

Option number 2: the simplest device for picking apples

1. Fruit collector with bowl

Step 1... And again, we cannot do without such a necessary thing in the household as a plastic bottle. We cut it in half, separating the bottom from the neck. We don't need the bottom anymore. Cut deep teeth on the cut edge, and drill 2 opposite holes in the neck.

Step 2... We are preparing a wooden pole, one end of which we adapt to the opening of the bottle. A handle from an old garden tool will do. Now we put the bottle neck on the pole and fix it with two self-tapping screws.

2. Closed collector

You don't have to cut off the bottom of the bottle, but just cut a round hole on the side. On the side of the bottom, make several teeth in the hole. Then put the bottle on a pole in a known way and start picking apples. The fruits are placed inside the bottle and plucked in one motion. A closed collector picks apples more easily, but can pick up no more than two fruits at a time.

Now you do not need to master the science of climbing trees and endless maneuvers with garden stepladders, and the question of how to remove apples from a tall tree is no longer possible. The juiciest apples will be harvested without difficulty thanks to your skillful hands and will. A bowl of these homemade fruit pickers will last you a couple of years. Once worn out, it can be easily replaced using a new plastic bottle. Well, it remains for you to wish that the fruits of your skill will definitely help you get all the fruits from your apple trees!

What is a picker or fruit picker for fruits

Whoever is accustomed to that calls this device. Each summer resident calls him in his own way, who is a fruit picker, who is a fruit picker. These are synonyms that have the same goal and task. And there is also a telescopic collector for cherries and cherries. What does telescopic mean, we will figure it out the same.

A fruit picker or picker is:

• a device that is used for harvesting in the garden.When the height of the trees is large enough, there are a lot of fruits, then the crop must be harvested as soon as possible. So that they do not fall or get damaged. Indeed, in this form, they will quickly deteriorate;
• the fruit collector will help to collect them without damage and quickly enough. It all depends on the volume of the crop. We didn't have time to collect them, the birds were already right there. They ate everything, and ate as much as spoiled it;
• if there is a need to protect the fruits from birds, then you can use an inexpensive, but effective method. Garden protection nets, an inexpensive and easy-to-use protection product.

If a collector for harvesting in an orchard is said to be telescopic, it means that it has a rod. Which is one with him. Such a rod can change its length.

This is interesting: Plakun herb - what kind of plant, description, useful properties

Choke tool options

Plastic scoops with a comfortable handle, allowing you to gently pick small berries without damaging the bush.

Cicle Beetle 4607156361335

Fruit picker for picking wild berries with a special comb. The flap prevents the accumulated product from falling out.

Advantages:

rounded teeth for gentle collection.

Reviews:

Park

A device for collecting various berries from bushes: lingonberries, cranberries, blueberries. The product is assembled from plastic and equipped with a shutter. The holes in the lower part allow you to get rid of small debris and foliage.

Advantages:

• strong plastic;
• ergonomic shape.

Reviews:

Comparative characteristics of models

When choosing a fruit picker for the garden, it is worth considering the type of fruits and berries that you plan to pick. For tall trees, choose telescopic boom models of optimal length. It is better to give preference to products with a safer and more gentle plastic construction in order to avoid damage to the branches.

Types of fruit picking devices

The largest and juiciest fruits grow on the tops of the trees, closer to the sun.

It often happens that fruits cannot be removed without special devices that make work easier and shorten the harvest time.

For this, a whole arsenal of various techniques and tools has been created, from simple ones (ladders, baskets, hooks) to special industrial equipment (platforms).

The easiest way to remove fruit is to shake the trees and then pick up the fallen fruit.

This method can be used for picking cherries, nuts, etc.

To do this, spread a tarp on the ground under the branches of the tree.

When shaking the tree, use protective headgear - motorcycle or construction helmets.

Obvious advantages - speed and simplicity are also the biggest disadvantage of this method, since fruits and branches shaking wood may be damaged.

The twig shaker consists of long rods, at the end of which two hooks are attached.

They allow you to tilt individual branches and remove high-hanging fruit.

The hooks are used for all kinds of fruit trees.

Ladders and telescopic pruners are also used for hard-to-reach fruits.

The pruner is a long-handled knife.

The advantage of this method is that it does not damage the branches.

However, fruit falling to the ground may be deformed.

The most common device for picking fruits is a fruit picker; its other name is a fruit picker.

An important part of this tool is the long handle (rod) that allows you to harvest even from the very top of the trees.

The rod can be wood or plastic.

Particularly handy is the telescopic rod, that is, the handle with adjustable length.

When removed by the collector, the fruit falls into the basket after separation from the branch.

The stripper is used to remove all types of fruits, both single-fruited and bunches of grapes, etc.

For harvesting on an industrial scale, special equipment and machines are used.

Some of them allow you to pick fruits from trees, while others pick fruits already on the ground.

Industrial rope shakers shake trees with ropes.

Shakers can be attached to the rear of the tractor.

Hydraulic tree shakers are equipped with a grab arm that holds the tree trunk or thick branches.

Opinions differ about these shakers.

Some engineers believe that vibration stimulates root growth.

On the other hand, there are concerns that shaking will damage the tree and shorten its lifespan.

They also use mobile platforms-lifts to move people harvesting.

Such platforms work even on small slopes.

Option number 2: the simplest device for picking apples

1. Fruit collector with bowl

Step 1... And again, we cannot do without such a necessary thing in the household as a plastic bottle. We cut it in half, separating the bottom from the neck. We don't need the bottom anymore. Cut deep teeth on the cut edge, and drill 2 opposite holes in the neck.

Step 2... We are preparing a wooden pole, one end of which we adapt to the opening of the bottle. A handle from an old garden tool will do. Now we put the bottle neck on the pole and fix it with two self-tapping screws.

2. Closed collector

You don't have to cut off the bottom of the bottle, but just cut a round hole on the side. On the side of the bottom, make several teeth in the hole. Then put the bottle on a pole in a known way and start picking apples. The fruits are placed inside the bottle and plucked in one motion. A closed collector picks apples more easily, but can pick up no more than two fruits at a time.

With the help of such a device, it will not work to collect many apples at one time, but the advantage of this device is in the speed of its manufacture: with all the materials at hand, you will need a maximum of five minutes, or even less

The scheme of the device is simple: cut a hole in the shape of a heart on the side of the plastic bottle, use a screw or electrical tape to attach the bottle to the holder and we can start picking apples or other fruits

Now you do not need to master the science of climbing trees and endless maneuvers with garden stepladders, and the question of how to remove apples from a tall tree is no longer possible. The juiciest apples will be harvested without difficulty thanks to your skillful hands and will. A bowl of these homemade fruit pickers will last you a couple of years. Once worn out, it can be easily replaced using a new plastic bottle. Well, it remains for you to wish that the fruits of your skill will definitely help you get all the fruits from your apple trees!

Types of fruit picking devices

The largest and juiciest fruits grow on the tops of the trees, closer to the sun.

It often happens that fruits cannot be removed without special devices that make work easier and shorten the harvest time.

For this, a whole arsenal of various techniques and tools has been created, from simple ones (ladders, baskets, hooks) to special industrial equipment (platforms).

The easiest way to remove fruit is to shake the trees and then pick up the fallen fruit.

This method can be used for picking cherries, nuts, etc.

To do this, spread a tarp on the ground under the branches of the tree.

When shaking the tree, use protective headgear - motorcycle or construction helmets.

The obvious advantages - speed and simplicity are also the biggest disadvantages of this method, as fruits and tree branches can be damaged when shaken.

The twig shaker consists of long rods, at the end of which two hooks are attached.

They allow you to tilt individual branches and remove high-hanging fruit.

The hooks are used for all kinds of fruit trees.

Ladders and telescopic pruners are also used for hard-to-reach fruits.

The pruner is a long-handled knife.

The advantage of this method is that it does not damage the branches.

However, fruit falling to the ground may be deformed.

The most common device for picking fruits is a fruit picker; its other name is a fruit picker.

An important part of this tool is the long handle (rod) that allows you to harvest even from the very top of the trees.

The rod can be wood or plastic.

Particularly handy is the telescopic rod, that is, the handle with adjustable length.

When removed by the collector, the fruit falls into the basket after separation from the branch.

The stripper is used to remove all types of fruits, both single-fruited and bunches of grapes, etc.

For harvesting on an industrial scale, special equipment and machines are used.

Some of them allow you to pick fruits from trees, while others pick fruits already on the ground.

Industrial rope shakers shake trees with ropes.

Shakers can be attached to the rear of the tractor.

Hydraulic tree shakers are equipped with a grab arm that holds the tree trunk or thick branches.

Opinions differ about these shakers.

Some engineers believe that vibration stimulates root growth.

On the other hand, there are concerns that shaking will damage the tree and shorten its lifespan.

They also use mobile platforms-lifts to move people harvesting.

Such platforms work even on small slopes.

How to pick an apple from the top branch

Any device listed above is suitable only if the apples break off easily and even fall by themselves with a slight shake of the tree. But what if the stalk is firmly attached to the trunk? You can accidentally damage the pulp with the "nail puller", and the "bilboke" itself can break or deform with a strong jerk. Tin cans will help you out here.

The first option is the simplest. We simply fasten a large and deep tin can with a wire on a stick, making small holes in the wall. Next, in the edge, cut a wedge-shaped slit under the handle and slightly push it apart from top to bottom, getting a semblance of a spout for a coffee pot. The sharp edge of the tin will easily cut the apple off the branch.

Fruit picker

The second option is from a large-diameter plastic pipe, like those used for gutters or sewers. Cut a segment about 40 centimeters long on one side with petals, which we bend inward, thus creating a closed end (even with slots). In the upper part we make a slot, which should be bent to the side, and then slightly upward, that is, in the shape of a fish hook. At the end of it with two screws, we fasten the blade from a pencil sharpener or just a sharply sharpened strip of metal. Now it is enough to catch an apple stalk in this slot, bring it to the blade, and the fruit will fall into the tube.

The third device is the most difficult to implement, but will last the longest. So, you will need a piece of metal pipe, a washer or a circle of large diameter (about 3-4 centimeters) and a dozen metal rods of a centimeter cross-section and up to half a meter long. We weld a washer or a metal circle to the end of the pipe (from the other, a stick will be inserted into it).Further, with an equal step, we weld the rods at a slight angle so that they diverge from the center upwards.

From the side, you get the classic shape of the janitor's broom. The welding must be done very securely so that the rods can be slightly bent if necessary. Now we just grab the apple so that it is inside the structure, we turn the device, and the fruit will come off. For any device, it is better to take not a long wooden pole, but a telescopic or assembled bar from several separate sections in order to adjust the length as needed.

What is a fruit picker for apples and its principle of operation

The device for harvesting in the orchard is designed in such a way that the fruit, after being torn off from the branch, falls into a special container. And he stayed there until he was put in a box or basket. Thus, the harvester in the garden can be of several types.

1. Collet:

• wire,
• with a bag,
• with capture.

2. Plastic, in the form of a glass:

• the walls of which are cut into strips with rounded edges at the top. Such devices for harvesting fruit are also called the Tulip picker. Since by its appearance it resembles this flower;
• we pry the apple in such a way that its stalk would fall between the petals. Next, we turn the tulip in any convenient direction;

the stalk is torn off the branch, the apple remains in the tulip. And then it migrates to the basket.

Collet wire

Wire wires are:

• devices resembling an unopened flower. At the ends of the petals of such a flower, curved edges of the wire are provided;
• in order to stretch a strong thread into these holes. It is needed to hold the fruit when the stalk is detached from the branch;
• when the pear hits such a socket, you must pull on the thread. The socket will close and the fruit will be safely placed in the basket.

Collets with bag

Collet devices with a bag are:

a ring to which a small pouch is attached. At the other end of the ring are the same petal lobes. Which serve as a kind of grip or a kind of knife. They are also spoken of as a fruit basket;

• the bag is designed for the simultaneous removal of several fruits. If physically the gardener is able to hold not one pear, but five or more, then why not. Such collectors speed up the harvesting process a lot;
• some designs of this type provide a sharp metal blade attached to the ring. The attachment point is chosen in such a way that its sharp side is the second part of the blade;
• getting into the hole with a sharp knife on one side, the stalk will be cut faster. For grapes whose bunch is very tightly attached to the vine, this is a good suggestion.

Collet with gripper

Each telescopic collector with a grip works on the principle of not letting the fruit fall when it is lifted from the tree branch. Its task is also to:

• the pear, plum, or cherries did not fall out of the fixture on the way to the drawer. The largest and most delicious fruits ripen on the tops of the trees, closer to the sun. And the capture in order to remove them is definitely needed. A fruit picker with a grab is the design of a fruit picker without which, in some cases, you simply cannot do;
• the modern design of some devices allows the grip to be triggered with one light press. They are light in weight and can be handled with just one hand. Even a schoolchild will enjoy gardening with such a modern assistant. Bright and modern design which will delight any summer resident.

You can buy a fruit picker for apples with a telescopic handle in our online store at any time. Check out the assortment of this product category and place an order.

Option number 6: from a fishing net

If you have an aquarium or fishing net, then you already have a ready-made apple collector. Perhaps, to deal with recalcitrant cuttings, you will need to attach a device to the hoop that would tear off, cut off a twig

By the way, for convenience, the net in relation to the handle can be carefully bent at an angle

Having understood the principle of the fruit collector, you can make it from other materials at hand. Let's see what garden engineers have already come up with:

• A thick wire hoop and a linen bag stretched over it.
• A basket and a galvanized hoop as a knife.
• The design of two metal rings: a bag is stretched over a static one, and a small movable one above it can be tightened with a fishing line around the handle.
• Scissors, spring and pole construction.

Thus, making a fruit collector from scrap materials is absolutely not difficult. And giving free rein to your ingenuity, you can even come up with your own unique model of this device.

Autumn harvesting is a responsible process

To sell or process the fruits, it is important to harvest them without damage, so you cannot simply shake the tree, and if you pick each apple by hand, it will take too long to collect. To simplify the task, it is recommended to choose a suitable apple picker.

This device helps to pick the fruit without damaging the skin or flesh, and significantly saves time compared to the manual method.

Features and purpose

Today, fruit pickers can be found in a wide range on store shelves, but earlier gardeners could only make them on their own. Now customers are offered models of different types, for example, with a damper or a universal telescopic handle. Such devices are especially relevant for owners of tall fruit trees, harvesting from which becomes a real problem. The picker can also be used to remove spoiled apples from the tree.

Some models need to be constantly freed from fruit during operation. However, at this time they are practically not in demand due to the inconvenience in operation, therefore, most of the models have a bulky bag or other container for fruit. The telescopic handle is also in demand, moreover, it is often universal, therefore, it can be combined with various garden tools.

What are the pickers

In garden-garden stores, you can find designs of different types, each of which has a number of advantages. Before buying, you should familiarize yourself with their features so that the operation process is as comfortable as possible.

Views

Plastic tulip

The long handle is a tall glass with slits. The product is made of dense plastic. Outwardly, the bowl resembles an opening tulip bud, hence the name. The design is simple and easy to operate. When picking apples, nuances arise only with immature fruits and strong stalks, which are poorly separated from the branch.

Collet

These devices are among the most popular. Most of the models are available with a telescopic handle. This allows apples to be picked from high branches. The design tip is made of metal or plastic. Some pullers are equipped with a stalk cutter. The principle of operation is similar to the "tulip" design. In the presence of a bag, fruit collection is carried out without interruption from the main process.

Wire

The rod of this design is made of metal, polymer or wood. A nozzle made of wire in the form of a small basket is used as a bowl. In the process of turning the handle, the stalk clings to the wire, after which it separates from the branch.

The principle of operation of this type is practically no different from other pullers.A special feature of the gripper model is the improved bowl. It is a three-finger mechanism that fixes the fetus by tightening the rope. This option is universal, with its help it is possible to remove not only apples, but also small fruits.

Among the models of this type there are designs with a line that grips the stalk, ensuring the separation of the stalk. The handles are simple and telescopic from different materials.

With telescopic handle

Telescopic handle models are popular among gardeners for their ability to pick fruits from different tree heights. The rod is made of metal, resin and wood. Equipping the model with a bag makes the design irreplaceable and easy to use. Such devices are used for apples, grapes, pears, plums and other single-fruited fruits.

How to choose

Taking into account the parameters of the apple and the strength of the stalk, it is recommended to choose a "tulip" -type construction for its removal. This option is not suitable for capturing smaller fruits. Attachments with a cutting element and a telescopic handle, a fruit picker with a grip are also suitable. The perfect addition is the bag, into which the harvested crop immediately falls.

When choosing a puller, it is important to consider the height of the trees. If the apple tree is large, you cannot do without a sliding handle

What is the price

The cost of the puller depends on the material from which the product is made and design features. A wire-based device will cost about 380 rubles, in the range from 80 to 230 rubles, you can choose a model of the "tulip" type. You will have to pay more for a fruit picker with a bag and a telescopic handle - 389-795 rubles.

In garden shops, you can pick up a separate attachment and a rod. This will make it possible to get a universal tool.

Ready-made pickers - pros and cons

In stores, they sell special attachments for collecting fruits, made in the form of a crown facing upwards with teeth, to which a bag is attached from below. They are quite reliable, but short-lived, since thin galvanized metal is usually used. In addition, the prongs can easily damage the fruit, therefore, a large number of protruding parts on the collector is undesirable. However, such devices are used in a small country house, where there are no large harvests, and you can work slowly.

We recommend that you familiarize yourself

Fruit harvesting crown attachment

If you don't feel like messing around, a net can be made to quickly collect apples from a regular fishing net (old). At its farthest point from the handle, you need to make a bend so that the shape of the beak is obtained, it will replace the wedge-shaped slot in this device. Now it is enough to catch the apple and pull it so that it hits exactly the net. Can be repeated until the mesh is full.