Correct operation and maintenance
Each user of a walk-behind tractor should be able to use it correctly. To do this, each product is accompanied by an instruction manual, which describes in detail the principles of its use. Replacing the clutch, adjusting the carburetor, adjusting the plow, unlocking the wheels are simple processes that every owner can do.
The basic rules of operation of "Shtenli 1900 Pro" are as follows:
running in for 8 hours, while the load on the engine should be 2/3 of the power;
- in the winter period of the year, synthetic oil should be used for the walk-behind tractor, and in the summer - semi-synthetic;
- it is necessary to fill in oil after every 50 operating hours;
- for storage, the unit must be left with a previously empty tank and oil sump;
- the storage of the machine must be in a room with a positive temperature;
- spark plugs, oil filters should be cleaned or replaced annually.
Description
The Shtenli 1900 Pro Series is a heavy-duty machine for any type of soil. With its help, the farmer will be able to easily carry out arable work on the virgin lands, as well as perform a full range of garden and summer cottage work, for example, cultivation, milling, hilling, harrowing.
The presence of a PTO (PTO) in the Shtenli walk-behind tractor - the power take-off shaft - expands the technical potential of the device, making the walk-behind tractor a truly universal farmer's assistant. It is possible to connect to the Shtenli 1900 mower, snow blower, chopper, garlic planter and other accessories.
Shtenli 1900 Pro Series is equipped with a gasoline engine manufactured under license from HONDA INTEK OHV-AMS-192-FB, the number of engine strokes is 4. The power of this engine is 18 hp. The engine displacement is 420 cm3. The capacity of the fuel tank is 6.5 liters with a consumption of 1.3 liters of gasoline per hour. To refuel this model of a walk-behind tractor, the manufacturer recommends using AI-92 gasoline. Speed mode: 3 + 1 (1 reverse gear).
Basic equipment of the Shtenli 1900 pro series walk-behind tractor:
- Shtenli walk-behind tractor in packaged form;
- rubber wheels with wide tread (wheel dimensions 7.00x12);
- cutters (32 knives, disassembled);
- a universal hitch that allows the connection of almost any domestic attachments;
- a headlight that makes work in the evening more comfortable;
- shields for mounting over wheels;
- footrest for a stable position;
- tool kit - used during assembly;
- warranty card;
- Russian user manual.
Stenli range overview
Gasoline walk-behind tractors Shtenli
Shtenli 500
Motoblock Shtenli 500
This is the lightest walk-behind tractor in the model range of the German company Shtenli. It has a 7 horsepower gasoline engine. The weight of the machine is only 80 kg. To improve stability during heavy work, an additional wheel is installed in front.
Shtenli 900
This walk-behind tractor belongs to the middle class of traction and has an 8 hp engine. Shtenli 900 weighs 105 kg. The size of its pneumatic tires is 4 × 8.
Motoblock Shtenli 900
This Stenli model is used for processing medium-sized agricultural land.
Shtenli 1030
This walk-behind tractor is equipped with a gasoline engine with a capacity of 8.5 horsepower. Its weight is 120 kg, which is enough to drive heavy attachments.
Motoblock Shtenli 1030 pro
The cutting width of this model is not great - only 90 cm. Because of this, the owners note a lot of dirt adhering to them.
Shtenli HP 1100
Motoblock Shtenli HP 1100
This walk-behind tractor from Shtenli is equipped with a gasoline engine with a capacity of 11 horsepower. It is intended for processing prepared land plots. The gearbox has 3 stages, so you can control the speed of work in a convenient range.
Shtenli 1100 Pro series
This heavy walk-behind tractor is equipped with a Honda AMS 190F petrol engine with a capacity of 14 horsepower. The manufacturer offers two versions of these machines: with and without PTO. This gives buyers a choice. If they plan to use it purely as a cultivator, then they do not need a PTO.
Motoblock Shtenli 1100 PRO series
Also, there is the Shtenli XXXL model, it has a more organic appearance and an upper location of the fuel tank. The model is equipped with a Honda gasoline engine GX390 with 13 horsepower.
Shtenli 1400 Pro series
Motoblock Shtenli 1400 PRO SERIES
This is a representative of heavy motoblocks, which is equipped with a 14 horsepower gasoline engine and air cooling. Its weight is 177 kg and the tire size is 6.5 × 12.
Shtenli 1800 Pro series
Motoblock Shtenli 1800 pro series
It is also a heavy walk-behind tractor, which is equipped with a four-stroke 18 horsepower engine from the world famous Japanese company Honda. Its weight is 178 kg, which allows you to handle even the hardest rocks and transport heavy loads using trailed equipment.
Shtenli 1900 Pro series low gear
Motoblock Shtenli 1900 pro series
This is an improved 1800 series walk-behind tractor. Due to the fact that it has a lot of power, the speed of its work and driving is very high, and you have to move behind it at a fast pace. To reduce the speed, an additional downshift was installed.
Diesel walk-behind tractors Shtenli
Recently, diesel models of motoblocks are gaining more and more popularity, since their motors are considered more durable, have a longer service life, withstand serious loads and at the same time consume less fuel. Shtenli offers the following options for diesel motoblocks.
Shtenli G-180
Motoblock Shtenli G-180
This walk-behind tractor will be an excellent assistant in a small summer cottage. Its power is only 7 horsepower. At the same time, the weight is not small - 250 kg, thanks to which absolutely any type of soil can be processed.
Shtenli G185
Motoblock Shtenli G185
This walk-behind tractor is successfully used both privately and professionally. The G185 is powered by a 10.5 hp diesel engine. Its 280 kg weight makes it easy to handle any job. However, a large mass dictates its inconveniences. It is very difficult for them to control and turn.
Shtenli G-192
Motoblock Shtenli G-192
This walk-behind tractor has a diesel engine with a capacity of 12 horsepower. Despite the fact that the Shtenli G-192 walk-behind tractor belongs to the heavy class, the milling width is 90 cm.This Shtenli model is more designed for transporting goods or towing. Its weight of 320 kg, together with 6.5 × 12 tires, ensure passability on any ground.
Video: Assembling the Milling Cutter for the Walk-behind tractor Shtenli 1030
Also, do not forget that the movement of the knife during operation is counterclockwise
Be careful when assembling the module. any deviation in the structure will lead to imbalance of the axes, during operation the block will be deflected to the side
We also offer you a video detailing the process of assembling the cutters for the engine:
Installing cutters on a walk-behind tractor
It is best to mount the cutters on the motor unit with Partner to avoid injury, falls or damage to the unit. Raise the tiller before installing. You can use the tools at hand as support. If there are no such items nearby, break two boards side by side. Support steering wheel with design. Make sure the motor unit is securely attached. Then you can remove the wheels and replace the knives.
Home cutters for walk-behind tractor
To create a cutter for a walk-behind tractor with your own hands, you need to stock up on the following tools and blanks:
- metal pipe (diameter no more than 42 mm);
- blanks for cutting cutting elements (any unnecessary spare parts or pieces of metal will do. For example, you can use old car springs);
- welding;
- Bulgarian.
Cutting elements are adjusted to the correct size and sharpened as required. They must then be welded to the pipe in the correct order.
Experts recommend not to make cutters with a diameter of more than 50 cm, as this will reduce the risk of breakage during operation. Below is the detailed drawing for making slicers:
When using torches, be aware of the safety precautions and rules for using the product. The incisors must be above the ground before they start and their sinking must be slow and even.
Which cutters are best for the motor unit?
Each type of cutter has its own disadvantages and advantages
When choosing a cutter for an engine, its power and operating conditions must be taken into account.
For example, a reciprocating mill is very durable due to its design and the material from which it is made. This type of cutter has built-in knives and is made of high carbon hardened steel. It has versatile functionality as it can work in any conditions and on different soils. In addition, the blades of this cutter are easier to repair. just install and secure the new cutting element.
Coal milling machines are also suitable for tilling and cultivating heavy soils, but it will be difficult to get over areas with turf or roots. The equipment is clogged and does not work well. In addition, due to its design features, it is more prone to breakdowns, and repairs are usually carried out by welding, which takes more time and is unprofitable.
As you can see, each of the milling cutter sets is not without its advantages. When choosing, rely on the technical characteristics of your device and the features of future work.
Do you need to sharpen the cutters on the motor unit?
This question cannot be answered unequivocally. It all depends on the individual characteristics of the block, soil and conditions of use. For example, a heavy tractor with heavy blades is not required to work on heavy soils. You will not see a tangible effect from this procedure, just wasting your time and energy.
For trimming lighter walking tractors with small cutters, sharpening is a good option to improve the quality of the job. But there are also disadvantages. Firstly, sharpening takes only a few hours, then the procedure will have to be repeated, and this is a long and lengthy process. Secondly, the sharpened blades help weed roots, which, in turn, can only speed up their reproduction.
If you decide to sharpen the torch, remove it from the power supply, and clean it from the ground. Gently wipe each cutting element with sandpaper to avoid damaging them.
Specifications
The technical characteristics of Shtenli 1030 allow using this technique on any soil and at any time of the year.
- Clutch type: clutch.
- Reducer type: gear.
- There is no power take-off shaft, the crankshaft has a horizontal orientation.
Using Shtenli 1030, you can achieve a maximum working width of 90 cm.When working with cutters or a plow, the working depth is up to 30 cm.
Shtenli operates in three modes: 2 forward gears, 1 reverse gear. The volume of the gas tank is 6 liters. The launch is done manually.
The basic package includes the following items:
- Shtenli 1030 walk-behind tractor in packaged form;
- rubber wheels;
- cutters;
- universal type hitch;
- User's Manual;
- a set of tools for assembling a walk-behind tractor;
- warranty card.
The warranty period for the device is 2 years. To extend the service life of the device and the correct operation of the walk-behind tractor, assembly and running-in should be performed according to the instructions. Use the set of tools supplied with the unit for assembly.
Observe the recommendations for the types of oil and fuel for the device - low-quality lubricants and combustible materials accelerate the wear of the engine and filters.
Assembly
Tillers are delivered fully assembled. However, it should be noted that the steering wheel is folded down to reduce the space required. It must be straightened, adjusted in height, and in some models horizontally, and fixed in the desired position.
Assembly
Sometimes the question arises of how to assemble the Profi 1030 walk-behind tractor and some other models, since the wheels in it during delivery are at a minimum distance. In this case, loosen the fasteners, push them apart to the desired distance and fasten. The exact information is indicated in the assembly instructions for the Profi 1030 walk-behind tractor.
After factory assembly and during transportation, bolts, nuts, frame clamps may not be tightened too tightly. All hardware of the frame, gearbox housing, chassis and handle must be tightened to the stop.
You should also check and adjust the tension of the V-belt, make sure that the tire pressure is correct.
When driving in a straight line, for example, plowing long rows, this function only interferes, so it should be blocked before starting the movement.
Advantages of Shtenli walk-behind tractors
When developing this series of equipment, its designers used the most modern technologies and the highest quality materials. The products significantly surpass the majority of domestic and foreign counterparts in terms of technical characteristics and operational capabilities.
Motoblocks Shtenli are characterized by the following advantages:
- The presence of a decompression valve. This device provides a guaranteed engine start at the first attempt, even in winter and after conservation.
- Innovative transmission Shtenli Gear Shift 2+ (SGS 2+). The mechanism provides clear and smooth gear shifting. All gears fit well and are in close contact.
- Bright and durable headlight. Provides excellent visibility in all weather conditions. The lighting sector is wide enough not to use additional lights.
- Functional steering. The column and levers are adjustable in 2 planes, which allows you to adjust them to fit any person. If necessary, the steering wheel is shifted to the side so that the operator does not trample the plowed soil.
- Convenience of management. All levers and buttons are located on the steering gear. The operator can perform any action without stopping the machine and without being distracted from work.
- Vibration and noise reduction system. With great power and solid weight, the unit operates almost silently. The shock absorbers are so good at dampening vibration from the engine that it is almost not felt on the handles.
- Universal mounts for additional options. They are suitable for all types of attachments and trailed implements that exist today. In this case, you can adjust the depth of immersion in the soil.
- The possibility of increasing the wheelbase. This is achieved by installing extension cords on the axle shaft or special pads on the discs.
- Ease of maintenance. The unit does not need special care, regular maintenance and overhaul. All he needs is dirt cleaning, regular oil changes and spark plugs.
The purchase of a Shtenli walk-behind tractor is a promising and practical investment. Fully equipped, this machine will fully replace the entire fleet of specialized equipment. As for durability, the manufacturer guarantees at least 10 years of product service.
General information, purpose and design features
Shtenli 1030 is used for soil cultivation in different ways - cultivation, harrowing, plowing, working with rotary tillers, inter-row cultivation of vegetable crops, mowing grass and shrubs, cleaning areas from snow and debris, transporting goods, pumping water and other types of work. As you can see, the capabilities of the walk-behind tractor inspire respect. Most often, the model is purchased by farmers, gardeners, summer residents and public utilities. The walk-behind tractor is quite compact and lightweight, but with the installation of certain equipment, it is quite suitable for professional use. It can also be used in greenhouses.
Let's pay attention to the design advantages of the model:
- The cutters are located under a protective shield that protects them from external influences, such as dust, stones and soil lumps
- An automatic speed limitation is built into the engine of the walk-behind tractor. This system allows you not to hear frequencies higher than specified in the user manual.
- Powerful power plant. The basic configuration includes 5 bypass channels, which provide a more accurate distribution of the combustible mixture
- Built-in decompression valve - designed for easier and more reliable starting in cold weather
- A volumetric tank of 6 liters - is already in the basic configuration, even in spite of the high fuel efficiency
- The developers managed to achieve the perfect balancing of the drive and the handle, which, by the way, can be adjusted to suit you
- Built-in anti-vibration system - effectively absorbs noise and vibration, and contributes to more comfortable and many hours of work. This way the operator gets less tired and can work longer.
- Sophisticated flue gas system
User manual
Before using the equipment, you should thoroughly familiarize yourself with the technical documentation and the operating instructions for the device. Compliance with these recommendations will significantly increase the service life of the equipment.
- The manufacturer of the aggregates, regardless of the engine type, recommends using only synthetic or semi-synthetic oil of the SAE-30 or SAE5W-30 brand, as well as regularly changing the oil, refilling it only when the engine is warm. As for the gearbox, this unit will need 80W-90 oil. Fuel for gasoline models must be at least A-92 grade.
- The first thing the owner of a new walk-behind tractor should do is to run in the device. This work is necessary for grinding in all moving parts in the unit, as well as adjusting the gas. During the initial run-in, the machine should work at a third of its power for about 10 hours, but without using equipment as a traction unit.
- Among the mandatory work on adjusting the functioning of all systems in Shtenli walk-behind tractors, it is worth highlighting the debugging of the bevel gear, adjusting the gear, draining the used oil after running in and replacing it with a new substance. And also the gearbox in the walk-behind tractor deserves special attention, the permissible backlash in the gearbox.
The next video is waiting for you review of the Shtenli walk-behind tractor 1900.
User manual
The work of each new owner of the Profi walk-behind tractor should begin with familiarization with the operating instructions in order to understand the principle of its activation, the purpose of the levers, control, maintenance and safe operation.
Walk-behind tractor Profi 1400 PRO series
First start-up and running-in
Getting started with the Profi walk-behind tractor largely determines the duration of operation without breakdowns.
At the end of the assembly, you cannot immediately use the Profi walk-behind tractor at full power. The manufacturer recommends to work on it in the break-in mode for the first 8 hours, which means that the machine is not used at full capacity. You can do shallow plowing, milling, or just drive with an empty trailer.
Service
The maintenance schedule for Profi walk-behind tractors is clearly described in the operating instructions.
Before each trip, you should check the condition of the Profi walk-behind tractor: the presence of fuel and oil, the reliability of attachment fixation, the condition of the wiring, and the absence of oil leaks.
The engine oil should be changed every 25 hours of operation. The user manual recommends using a 10W-40 replacement.
- The transmission oil should be changed after 50 hours. It is recommended to fill in Tap-15V or Tad-17i.
- If gear shifting is difficult, then the lever must be lubricated with water-repellent grease.
Litol-24 or Solidol.
Correction of basic problems
Motoblocks Profi are designed for long-term operation, however, sooner or later minor problems arise that need to be addressed:
If the engine does not start:
- It is possible to disconnect the high-voltage cable from the spark plug (because of this, there is no spark when turned on);
- Maybe the spark plug is out of order (you need to clean or replace it);
- The fuel supply is cut off (put the damper in the open position);
- Lack of fuel or it is of poor quality (add or replace fuel, start the engine again);
- Check the oil level (top up if necessary);
- Clogged fuel or air filters (clean, replace if necessary);
If the Stanley walk-behind tractor engine works, but does not provide the required power:
- The contact on the spark plug comes off (connect the wire clearly);
- Clogged fuel or air filter (clean);
- Incorrect carburetor setting (adjust it);
- If there was fuel in the tank for a long time without use, it accumulated moisture and became unusable, drain it and refill with a new one.
Complete set of walk-behind tractors Shtenli
The manufacturer made sure that after the purchase and assembly of the Shtenli 1900 Pro walk-behind tractor can be immediately used for agricultural and other work.
The basic equipment of the unit includes:
- Body with axle shafts and steering column. All units are preservative to prevent corrosion during transport and storage.
- Wheels flat. Wheels are packed in a separate container to ensure safety and integrity.
- Milling cutters for loosening the soil. The tool is made in a modular form, fixed separately from the wheels. The shape of the cutters allows easy penetration into the ground. The weeds, together with the roots, are wound around the axle of the machine. The teeth of the cutters are made of hardened steel by forging.
- Universal hitch. With the help of this device, almost all types of additional equipment, including those of domestic manufacture, are attached to the unit.
- Hood. It performs a protective function, covering the unit body from precipitation, debris and dust. Prevents smoke and soot from entering the operator.
- Tool kit. It is quite enough to eliminate minor faults, to adjust the backlash and ignition, disassemble and assemble the walk-behind tractor, carry out routine maintenance and minor repairs.
- Headlight. Powered by a generator that provides an even and strong glow, regardless of engine speed. Unlike most analogues, the headlights of Shtenli walk-behind tractors are adjustable vertically and horizontally.
- Glove compartment. A small but functional drawer can be used for more than just storing tools and consumables. You can put water, food and a set of linen in it.
The equipment is accompanied by an operating manual, a lubrication card, a technical description and a warranty card. Additional options are purchased separately as needed. Until then, the technique can be used as a motor cultivator.