Description
These devices are manufactured in a high-tech Chinese factory under an American license. Quality control at the RedVerg plant takes place at every stage of production. The final product always undergoes a rigorous inspection by the Quality Control Department. Thanks to this, the manufacturer guarantees a consistently high product quality.
Unlike other manufacturers, RedVerg does not offer individual models that differ in their modifications, but whole series of motoblocks.
Burlak
This series includes powerful diesel walk-behind tractors that can perform a wide range of agricultural work from milling and plowing to transporting heavy loads.
The RedVerg Burlak motoblocks are equipped with a four-stroke engine with a capacity of 12.5 horsepower. The engine is started using an electric starter.
Motoblock Redverg Burlak
The scope of delivery includes cutters, the width of their processing is 100 cm, the weight of these devices is from 300 kg. The gearbox has 8 positions: 6 forward and 2 back.
Distinctive characteristics of Redverg Burlak:
- The cultivation depth can be set using the rear wheel;
- Pneumatic tires 6.00 × 12;
- Able to cultivate any type of soil;
- The presence of a headlight, which allows you to work even at dusk;
- All control levers are located on or near the steering bar.
Volgar
These Redverg walk-behind tractors can work on medium-heavy and loose soils on areas up to 3 hectares. When working with virgin lands, it will be necessary to walk several times.
Motoblocks Redverg Volgar
Distinctive characteristics of RedVerg Volgar:
- The universal hitch allows you to aggregate any attachments. It has also been additionally reinforced to withstand heavy loads;
- High wheels with wide tread allow the Redverg Volgar walk-behind tractor to move on any ground;
- A telescopic footboard is installed in front, which allows you to lean the device over when the engine is warming up or during work breaks;
- The steering wheel can be adjusted not only in height, but also turned to the side;
- In the design of the Volgar walk-behind tractor, there are no drive belts, which makes it possible to exclude possible malfunctions of this part.
Valdai
These walk-behind tractors are compact in size and high in power.
Motoblock Redverg Valday RD-32942BS / H / L
Of the features, the following can be noted:
- Wide range of attachments;
- Low center of gravity;
- The power take-off pulley has 2 grooves, which makes it possible to connect snow throwers and rotary mowers;
- An aggressive tread pattern is installed on pneumatic tires, which improves the passability of the RedVerg Valdai walk-behind tractor;
- Chain reducer.
Goliath
These walk-behind tractors have a professional single-cylinder air-cooled engine. They are used when processing plots up to 1 hectare.
Motoblock RedVerg Goliath-2-9D
- The wheelbase has been increased. This gives additional stability during operation;
- The height of the opener can be adjusted for a specific type of soil;
- The gearbox is installed in a cast iron housing, which allows you to work even with the most difficult soils;
- During downtime, the Redverg Goliath walk-behind tractor can be leaned over on a telescopic footboard;
- Improved air filtration system with porous filter and dirt collector.
Ant
These motoblocks have a cultivation width of up to 80 cm. The chain reducer allows you to transmit high torque to the attachment.Thanks to this, the RedVerg Ant walk-behind tractor can even cope with virgin lands.
Motoblock RedVerg Ant-3MF
Distinctive characteristics of Redverg Ant motoblocks:
- Powerful four-stroke gasoline engine;
- The speed control lever is located on the steering rod, which allows you to adjust the speed of rotation directly while driving;
- During plowing and cultivation, the steering wheel can be turned in a horizontal plane and not trampled on the ground;
- The air filter has 2 elements: paper and foam. Together they improve airflow cleaning;
- To ensure the safety of the owner during cultivation, wide protective double wings are installed.
Scope of use
The choice of a walk-behind tractor is often limited by engine power. The equipment also differs in other parameters, including those related to the direct purpose of devices. In order not to face problems in chores, you need to choose a machine in accordance with your specific needs. Country walk-behind tractors will do an excellent job with seasonal work. Lightweight units are characterized by compact dimensions, but they are capable of processing large enough areas - up to 15 acres of land. The devices do not consume much fuel, but they do not allow the use of all the variety of attachments. Due to the low power, the load on lightweight units is provided for a minimum. But for the dacha economy, they are needed only a couple of times per season: in the spring - to plow the garden, in the fall - to harvest.
Home units can be classified as middle class. You can work with them almost daily. Machines can easily process up to 30 acres of land. Devices for virgin lands belong to the heavy series and are distinguished by increased power. The engine of motoblocks of this series allows you to transport goods. The units are often altered and used as a mini-tractor. Heavy walk-behind tractors can be supplemented with almost any attachment.
Before deciding on the purchase of a walk-behind tractor, you need to know your goals, and also compare them with the amount you can spend. After all, the more powerful the unit, the higher its cost. The power of the device must always be related to the type of soil on the site. Light aggregates will not cope if it is clayey. The engine running at full power will be overloaded. Lightweight equipment will not provide reliable ground grip, which means it will slip.
Device
Knowledge of the internal content of the walk-behind tractor will help to exclude the simplest breakdowns during the operation of the device. The main features of walk-behind tractors are distinguished by the ability to use gasoline or diesel fuel. RedVerg uses only four-stroke variants from 5 to 10 hp in its models. with. The performance of power units is provided by several elements.
- Fuel supply system. It includes a fuel tank with a tap, a hose, a carburetor, and an air filter.
- Lubrication system that is connected to all operating parts.
- Starter, also called crankshaft starting mechanism. Reinforced systems have electric starters with batteries.
- The cooling system is connected to a cylindrical block. Powered by air movement.
- The ignition system provides a spark in the plug. It ignites the air / fuel mixture.
- The gas distribution system is responsible for the timely flow of the mixture into the cylinder. It sometimes includes a muffler. In powerful cars, it is also responsible for noise reduction.
- The engine is attached to the chassis - this is a frame with wheels, and the transmission plays its role.
Belt and chain drives are common among lightweight device options. The belt drive is more convenient in assembly / disassembly. It has a driven pulley, control mechanisms, a system of levers, with the help of which the knot is tightened or loosened. The main gearbox and other spare parts are widely available.For example, a separately purchased engine already has a gas tank, filters and a starting system.
Operation and maintenance
Before proceeding with the full-fledged use of Agura walk-behind tractors, you must familiarize yourself with the instruction manual. It describes the technical characteristics of the model, the assembly sequence and the rules of operation.
Running in
Each new owner of Agura walk-behind tractors must start operation in accordance with the requirements of the operating instructions.
- After assembly, be sure to add oil and fuel to the appropriate compartments.
- Operation at full capacity cannot be started immediately.
- First, you need to run in (in other words, use the walk-behind tractor at minimum loads). This is done to thoroughly lubricate all the parts of the walk-behind tractor and their clear entry into the grooves.
- Usually the run-in lasts from 5 to 8 hours.
The following video review demonstrates the all-terrain Agura walk-behind tractor:
Service
Agura walk-behind tractors are made in China and are not considered the standard of quality. Therefore, to prolong their use, be sure to carry out technical work in accordance with the instruction manual.
- The gear oil should be changed after the unit has been in operation for 100 hours. For these purposes, you can use the publicly available Tad-17i or Tap-15v.
- The control levers must be lubricated with Litol-24 once a month.
- All Agura walk-behind tractors are gasoline powered and run on AI-92. Use of old or dirty fuel is not allowed.
- Every six months it is necessary to check the condition of the fuel and air filters, they tend to clog with dirt and fail.
Major faults and repairs
Agura walk-behind tractors are a technique that tends to fail periodically. Therefore, every owner should know how to fix them. Here are the main recommendations of the manufacturer:
The following are possible reasons for the drive belt slipping:
- Build-up of oily dirt (it is recommended to clean the belt);
- Loosen the belt tension (tighten it more tightly);
- The belt is heavily worn.
During operation, the gearbox gets very hot:
- Lack of gear oil or poor quality lubricant;
- The friction bearings are worn out (in this case, it is better to contact the service center for repair).
Motoblock Agura works in jerks:
- Different tire pressures or wear;
- The adjusting screws are not set correctly;
- Low fuel level;
- Drive belt problems.
Attachment overview
Thanks to additional attachments, the functionality of the tiller is significantly increased.Motoblocks Ant Redverg support work with the following types of attachments:
Cutters
One of the basic characteristics for each walk-behind tractor and cultivator is the width and depth of cultivation.
Depending on the model of the Ant walk-behind tractor, the delivery set includes 4 or 6 knives for milling cutters, which have a forward direction of rotation.
Typically standard saber cutters are used and do an excellent job on prepared soft ground.
However, if a deeper surface treatment is required with the Redverg Ant walk-behind tractor, "crow's feet" cutters are used. They are made in the form of rods with welded triangles at the ends. However, they have a significant drawback, they often break off when hitting stones or working hard rocks.
Plow
If it is necessary to cultivate virgin lands, then it is better to use the plow in conjunction with motoblocks of the Ant brand. In this case, milling cutters will not help, since the density of the soil is high, and they simply cannot sink into the ground.
During plowing, it is recommended to use a reversible plow, it not only raises the bottom layer of the earth up, but also breaks up large rocks of the soil.
When plowing, the main thing is to make a straight track, then one wheel is placed in the trench, and work continues with the plow.
Mowers
In the summer, Ant walk-behind tractors will help in maintaining the local area in order with the help of a rotary mower. It allows you to cut weeds of various heights and stem diameters.
Rotary mowers will also help the rural community to harvest hay for the winter. It is enough just to mow the grass, and then use a rake to collect them. If you have a rake for the Redverg Ant walk-behind tractor, you can use them.
Potato digger and potato planter
Potatoes can be found in almost every vegetable garden in our country. Motoblocks Redverg Ant, together with a potato digger and a potato planter, can greatly facilitate their implementation.
Hiller
There is a rather long period of time between planting and digging potatoes, During which it is necessary to care for this crop. Motoblocks of the Ant brand together with hillers allow not only hilling potatoes, but also weeding at the same time.
Snow blower and shovel blade
To remove the snow cover in winter, the Redverg Ant walk-behind tractor is used in conjunction with a snow plow attachment.
The snow blower picks up the snow with the help of a bucket and throws it over a distance through the rotor, while the blade-shovel simply throws it to the side.
Snow removal equipment will be especially useful for residents of rural areas and owners of country cottages, when there is no hope for utilities.
Wheels, lugs and tracks
Motoblocks Redverg Ant belong to the medium and heavy traction class, but sometimes they start to slip and get stuck in the ground.
To prevent this, you can use lugs.
If it is necessary to use a walk-behind tractor in the winter period of the year, then the lugs when driving on snow will not help much, in this case it is recommended to install tracks.
Trailer
Motoblocks Redverg Ant are capable of transporting loads weighing up to 500 kg using trailers. The most popular and versatile trailer model is the tipper. It allows unloading operations to be carried out by simply lifting the cart.
Weights
Another way to improve traction is to add extra weight. The Redverg company offers weighting materials that are made in the form of pancakes and are hung on the wheel axle. Thus, giving the motoblock Ant additional stability.
Adapter
When working with walk-behind tractors and cultivators on medium and large fields, quick physical fatigue sets in, since you have to constantly monitor and direct the machine. To reduce physical stress on the owner, you can install a special attachment - an adapter that allows you to control the device from a sitting position.
Forza-M motoblock adapter
Analogs
- Patriot Victory;
- Elitech KB 503 KM;
- Mobile MKM-3 Plowman
- Motoblock Ant 1 is a great option for those who live in the village. It can carry loads, plow and perform a lot of work. The model is excellent for soil cultivation. True, it is very difficult to cultivate virgin soil with factory cutters. I took this walk-behind tractor to my parents, who, after retirement, moved to the village. It turned out to be very difficult to handle a vegetable garden of 20 acres by hand, and therefore they decided to take additional equipment. Immediately I bought a cart for the apparatus so that the cargo could be transported. Ant 1 turned out to be a very simple and reliable walk-behind tractor. This is a real "workhorse", which also consumes very little fuel (just over 1.5 liters per hour of work).
- I have been using the Ant 1 walk-behind tractor for about 4 years. The technique is convenient and lightweight. There are no problems with transportation with it. But plowing hard soil is quite difficult. Even weighting agents do not always help. The gearbox and clutch are housed in an aluminum casing, the structure looks pretty fluid, but it holds up for now. Vibration during operation is practically not felt, in this regard, Ant 1 is very good.The walk-behind tractor has enough flaws, but there have been no serious problems in 4 years. For its price, the model is quite solid.
- Ant 1 is an excellent device that can even replace a mini tractor. For plowed beds, this is ideal, but for deep arable land or virgin land, this model is unlikely to work. Motoblock, despite its Russian name, is an American-Chinese product. They collect it in the Middle Kingdom, which is the main problem. In general, the device is quite good and has served me without failures for 4 years. However, you constantly have to twist and refine something. The model is probably worth its money and will last a long time with normal care.
- Motoblock Ant 1 acquired 3 years ago. The model attracted by the fact that a reliable device with a powerful engine and simple control was offered for a small amount. The motor is pleasantly pleased. It starts up once and allows you to work the land quite quickly, while consuming very little gasoline. In addition to my site, I work with a walk-behind tractor and with neighbors, which allows me to recoup the equipment. I would like to note one more important detail - for 3 seasons, the paint practically did not peel off the equipment, and there is no rust or corrosion at all. The summary is as follows: a good walk-behind tractor that will come in handy for anyone.
Transmission
The main transmission element of the Neva MB-2 walk-behind tractor is a gearbox. Its task is to change the gear ratio and impart rotational motion to the wheels. The patented development of the design engineers of ZAO Krasny Oktyabr - Neva, the MultiAGRO multi-speed reducer, successfully copes with this task.
The use of the MultiAGRO technology on the Neva MB-2 walk-behind tractors allowed:
- increase the number of gears up to three forward and one backward, which allows you to select the appropriate speed when performing various agrotechnical and economic works;
- increase the gear ratio, which significantly improves the traction characteristics of the walk-behind tractor without increasing the engine load;
- adjust the speed of movement of the right and left wheels, this increased the maneuverability of the walk-behind tractor;
- significantly save on time, labor and fuel, working in a comfortable mode on soils of different viscosity.
Thanks to its indisputable advantages, the Neva MB-2 motoblock brand has established itself as a reliable workhorse among rural workers in our country and far beyond its borders.