Cultivator hyundai t 850

Accessories and attachments

Lugs in many models are needed in order to prevent the tool from getting stuck in rather heavy soil due to the large area of ​​engagement of the equipment blades with clods of earth.

A plow in the form of a hiller is used to create beds, with its help you can weed, huddle potatoes. Extensions are needed in order to increase the distance between the wheels or between the lugs. The design will allow you to easily set the desired track width, while taking into account any features of the existing lawn or cultivated bed.

A plow-plow is useful for active plowing of the land and can be an excellent tool for high-quality mixing of fertile soil layers.

Hyundai walk-behind tractor manual

The instruction is included in the kit for the walk-behind tractor and consists of the following sections:

1. Guide for assembling a walk-behind tractor, its device (diagrams and descriptions are present).
2. Specifications and modifications.
3. Safe work rules.
4. Guide to starting the engine for the first time.
5. Break-in period.
6. Maintenance (main stages).
7. Malfunctions and their causes.

Let's take a quick look at some of the points.

Preparation for launch, running in Hyundai equipment

To increase the service life of the engine and the proper operation of the motorized device, it is necessary to properly prepare for the first start and run in. The preparation is as follows:

• filling of technical fluids (fuel and oil);
• checking the tightening of the fastening bolts;
• monitoring the tire pressure of the wheels.

The break-in period for Hyundai walk-behind tractors and cultivators lasts about 5-8 hours. At this time, all work is carried out in a gentle mode at half the capacity of the unit. The operation of the engine, levers and other mechanisms is checked. At the end of the break-in period, a complete oil change is made.

Hyundai maintenance

Just a few steps, but how much depends on them!

1. Oil change:
   • engine oil 10W-30 is changed every 25 hours of operation;
   • transmission oil (Tap-15v, Tad-17i) is changed every 100 hours worked.
2. Long-term storage:
   • drain technical liquids;
   • clean and wash the Hyundai walk-behind tractor;
   • lubricate mechanisms.
3. Daily care works:
   • before starting operation: check technical fluids (fuel and oils), bolt tension and wheel pressure;
   • at the end of work: clean, wash and lubricate the unit.
4. Scheduled inspections.

Only petrol modifications require such maintenance, electric cultivators are unpretentious and require only cleaning from dust.

Hyundai equipment malfunctions

Consider engine malfunctions of gasoline units. What are the reasons that the Hyundai walk-behind tractor does not start, stalls, etc.:

1. Out of fuel.
2. Poor fuel quality.
3. Not enough oil.
4. There is no compression in the cylinder.
5. The high voltage ignition wire is cut off.
6. The spark plug needs to be replaced or cleaned.
7. The filters are clogged.
8. Ignition not adjusted.
9. Carburetor not adjusted or needs cleaning.
10. The throttle valve is in the wrong position.

Overview of attachments for Hyundai walk-behind tractors

We suggest that you familiarize yourself with those attachments that turn the Hyundai cultivator into a full-fledged and multifunctional agricultural device:

1. Milling cutter. A device that fits on the drive shaft of a walk-behind tractor or cultivator and is used for plowing all types of soil. For Hyundai, saber-shaped rotary tillers are used, although there is another type - “crow's feet”. They are present in the complete set for walk-behind tractors, come to the owner disassembled. The instruction manual contains a detailed description of the assembly.

2. Plow.Designed for arable work, used by more powerful Hyundai walk-behind tractors, most effective in cultivation of virgin lands. There are reversible and simple plows, single-body and double-body. In the process of plowing, the soil layer is trimmed with a ploughshare and completely turned over.
3. Grousers. These wheels are completely metal, special ribs are welded onto the rims, which improve the grip of the Hyundai walk-behind tractor with the ground and additionally loosen the soil.
4. Trailer. Purpose - transportation of goods. Carrying capacity for Hyundai motoblocks is up to 250 kg. There is a frame, a wheelset, a driver's seat, controls and a body with a self-resetting function.

5. Adapter. A nozzle that allows the owner of the equipment to control the walk-behind tractor while sitting, like on a mini-tractor. There is a brake and control levers.

6. Potato planter. With this sample, the procedure for planting potatoes will not take much time and effort. Fully mechanized process: in front, a fixed hiller cuts a furrow into which the tubers coming from the hopper are placed. A soil ridge is immediately formed on top of the tuber by other hillers.
7. Potato digger. Harvesting potatoes without spending time and effort is a reality. Special nozzles (mechanical, vibrating and eccentric tuber diggers) will help speed up and simplify this procedure, having collected about 98% of the crop.
8. Wheels. This equipment is used to transport the cultivator in a given direction.
9. Tracked module. The design is quick-detachable, it turns the walk-behind tractor into an all-terrain vehicle, allows it to move without losing speed over mud and snow.
10. Mower. This device is used for mowing grasses, cereals, preparing livestock feed. There are three types of motoblock attachments.
11. Weights add weight to the walk-behind tractor in order to increase cross-country ability and grip.
12. Coupling. A device that connects various attachments to walk-behind tractors. Adjustable couplings allow you to set both the horizontal and the angle of attack of the implement.
13. Snow blowers. These attachments are available in the following models: Blade Shovel, Rotary Snow Thrower and Brush. Quickly cope with snow masses of all types.

User manual

This document must be studied by new owners of Hyundai motoblocks. It contains a kinematic diagram of the device's connection, detailing, assembly process, the nuances of running in and a schedule for preventive maintenance work.

First start-up and running-in

The correct start of the use of Hyundai walk-behind tractors is the key to their long-term use.

The first eight hours of operation, the walk-behind tractor should be used at half of the maximum power. This period is called running in. This is done so that the engine parts rub against each other and are thoroughly lubricated. Upon completion of the running-in, the engine oil should be changed.

Service

1. The engine oil should be changed every 25 hours of operation. It is recommended to use semi-synthetic versions 10W-30.
2. The transmission oil must be changed after 100 operating hours. The user manual recommends using the Soviet Tap-15v or Tad-17i.
3. For Hyundai motoblocks, it is necessary to use only fresh and clean AI-92 fuel, since these devices are sensitive to fuel quality.

Major faults and repairs

Each owner of Hyundai motoblocks should be familiar with the basic troubleshooting scheme.

Possible reasons that the motor will not start:

• The fuel tank is empty (refill with fuel);
• Old gasoline is used (drain old fuel and pour new clean);
• Incorrectly set throttle position;
• Malfunctions with the spark plug (it is dirty, the wrong gap between the contacts is set, or the terminal has come off);
• The oil in the tank has dropped below the minimum mark (add lubricant).

• The terminal on the spark plugs leaves;
• Water or dirt has entered the fuel tank;
• Fuel tank vent cap clogged with debris;
• Clogged air filter;
• Lost carburetor settings.

What it is?

Among the most significant advantages of Hyundai cultivators are endurance, ease of use and unpretentious maintenance. The technique of this company does not need specific care. The user will only need to make the necessary lubricant on time and change consumables as needed. Another significant plus is a decent power reserve, which will allow using various attachments of the mounted type for active work with Hyundai cultivators.

If you need a light type of cultivator for soil cultivation, then it is best to turn your attention to electric machines. There will be no additional units in their case, for this reason, this type of equipment will have greater maneuverability, it will be very easy to control it.

But this kind of model may not be relevant for some farmers. If your site is located outside the city, then it is quite possible that you will not be able to connect your electric cultivator to a power source. In this case, the best solution would be to purchase a petrol model of a soil tillage device from Hyundai.

Description

The South Korean company Hyundai is one of the world leaders among car manufacturers. The literal translation of the name means "modernity" or "new time". And this is one of the principles of the company, which reveals the meaning of their activities.

Hyundai T500

It is the smallest and most manoeuvrable petrol model.

Motoblock Hyundai T500

• The T500 walk-behind tractor is equipped with a HYUNDAI IC90 engine with a power of 3.5 horsepower.
• The chain reducer increases the service life of the T500 walk-behind tractor.
• The weight of the Hyundai T500 walk-behind tractor is only 30 kg.
• There is no reverse in this model.

Hyundai T700

This model is in greatest demand among rural residents, who have a plot of up to 20 acres.

Motoblock Hyundai T700

• The T700 walk-behind tractor is equipped with a HYUNDAI IC160 engine with a power of 5.5 hp.
• The width of the cutters can be adjusted within the range of 300-600 mm.
• The weight of the Hyundai T700 walk-behind tractor is 43 kg.
• This device provides only 1 gear - forward.

Hyundai T800

This device is analogous to the T700, only here a reverse is additionally installed. The T800 walk-behind tractor is designed for use in areas with an area of ​​up to 30 acres.

The T800 weighs 45 kg.

Hyundai T850

This device has a HYUNDAI IC200 petrol engine (6.5 horsepower). It is driven by a recoil starter.

• The width of cultivation with the T850 walk-behind tractor can be adjusted in three positions: 30-60-90 cm.
• The improved chain reducer allows it to withstand heavy loads for a long period of time.
• The number of gears on the T850 walk-behind tractor is only 2: one forward and one reverse.

Hyundai T900

Hyundai T900

• This walk-behind tractor is equipped with a gasoline engine with a power of 7 hp.
• The T900 has a 3 liter fuel tank.
• The weight of the device is 56 kg.
• 4 knives are installed on the milling cutters of the T900 walk-behind tractor.
• The largest cultivation depth is 300 mm.

Hyundai T1200

This is the most powerful Hyundai petrol motoblock from the entire line of the model range. The T1200 has a 7 horsepower ic220 engine. The motor is mounted on a sturdy metal frame.

Hyundai T1200

The width of the cutters can be adjusted in three positions 30-60-90 cm.The greatest cultivation depth is 32 cm.

The manufacturer guarantees the performance of the Hyundai T1200 walk-behind tractor for 2000 hours.

Hyundai T1500Е

This is a lightweight walk-behind tractor, which is powered by a 220 V.

Hyundai T1500Е

• The T1500E motor has overload and overvoltage protection.
• The cutters in this model have additional stiffeners. Their capture width is 200 mm, the immersion depth is the same - 200 mm.
• The T1500E housing is made of impact-resistant plastic.
• This model is intended for use in small areas only.

Hyundai T2000E

This device is the most powerful electric model among all analogues.The engine of the T2000E walk-behind tractor is mounted on a solid steel frame.

Hyundai T2000E

• This model is used on land plots with an area of ​​up to 10 acres.
• The cultivation depth can be up to 25 cm, and the working width is 28 cm.
• The T2000E walk-behind tractor weighs 30 kg.

Types and models

The classification of motoblocks includes several types of devices.

Light motoblocks

Equipped with four-stroke engines from 2.5 to 4.5 liters. s, have a weight within 80 kg, the width of the treated surface is up to 90 cm, the depth of processing is 20 cm.

Medium motoblocks

Supplied with engines up to 7 HP. with. and weighing no more than 100 kg. Equipped with a transmission with one or two forward speeds and one reversible. They combine the properties of a station wagon, due to this, various additional devices can be connected to them.

Heavy motoblocks

Engines with powers up to 16 liters are obtained. with. and weighing from 100 kg. They are used mainly on a large scale, for example, for farming purposes. There are many alternative attachments available for these machines.

At the moment, the lineup of motoblocks from the Hyundai company includes many models. Let's consider the most popular ones.

Hyundai T500 is the smallest gasoline model on offer. This model is equipped with a 3.5 liter Hyundai IC90 gasoline engine. with. With the help of a chain reducer, the service life of this walk-behind tractor is increased. This unit weighs only 30 kg. No reverse gear.

Cultivator device Hyundai T 850

Description

Starting a review of Hyundai motoblocks, let's turn to its manufacturer. Responsible for the production of motorized agricultural machinery for small private landholdings is the renowned South Korean company Hyundai (Hyundai).

Hyundai Motoblocks

Founded in 1967 and specializing in the manufacture of cars, the company has expanded, strengthened, diversified its range and began to manufacture garden equipment, in particular, walk-behind tractors. This technique, like everything that the Hyundai brand produces, was appreciated by the consumer due to its low price and high build quality.

Attachments

Cutters

This attachment comes with most Hyundai devices.Mills are used for soil cultivation. During operation, they mix the topsoil and increase yields.

Plows

When working with stony soils, it is recommended to replace the cutters with a plow. They were used by our ancestors, and they allow you to work even the most difficult soils.

Most often, plows are used when it is necessary to plow virgin lands.

Hyundai offers its customers reversible plows. They don't just throw the bottom layer of the soil up. Thanks to the special design of their plowshares, they break up the formed blocks of earth. With this, it is not necessary to harrow the area after plowing with a reversible plow.

Mowers

Many people in rural areas are familiar with the problem of lush grass growth when it is necessary to constantly mow it. Motoblocks Hyundai T1200 and others can make it easier to harvest grass with a mower.

The South Korean plant, along with Hyundai motoblocks, offers its customers to additionally purchase rotary mowers in combination with the device. They cut the grass with rotating knives. The knives are made of strong, hardened steel that does not break off when hitting a stone or bump of the ground.

Potato diggers and potato planters

Motoblocks Hyundai can help in performing work with potatoes. This is due to additional attachments that can automate the process of planting and digging potatoes.

This hitch is simply irreplaceable for farmers who plant large areas with this crop.

Snow blowers and shovel blade

Hyundai motoblocks in the winter time can help in cleaning the snow cover. If it is necessary to remove snow in large areas, it is recommended to use snow blowers. They pick up a layer of snow and throw it aside at a distance of up to 15 meters.
The throw distance directly depends on the power of the Hyundai walk-behind tractor and the direction of the wind. The T1200 and T800 will throw the same snow at different distances.

Most often, snow blowers are used by public utilities.

Shovel-blade LM-100

The blade of the shovel is used when it is necessary to remove snow from a small local area in the countryside or near a summer cottage. Even the lightweight T800 walk-behind tractor can handle this.

Adapters and trailers

When operating Hyundai walk-behind tractors, a great physical load is exerted on the owner due to the constant movement behind him while standing. Adapters provide the operator with the ability to control the walk-behind tractor while sitting on a special seat.

Trailers with Hyundai walk-behind trailers allow you to transport goods over a long distance. It is best to use dumping options that make it easier to unload bulk cargo. In these trailer models, it is enough to simply raise the front of the bogie and the load will be unloaded from it.

Wheels, tracks and lugs

Hyundai motor-blocks are equipped with high-quality pneumatic tires that are capable of moving the device on viscous soil and wet soil.

If the standard grip is not enough, then lugs can be used. Their metal plates sink into the ground and help the device move smoothly.

In the winter season, Hyundai walk-behind tractors are "changed" to caterpillars. They increase the area of ​​contact of the device with the surface and allow you to move on loose snow and slippery ice.

Weights and couplings

Another option for improving grip is to increase the weight of the device using weights.

On Hyundai walk-behind tractors, a universal hitch is installed, which allows you to use attachments from other manufacturers.

Specifications

A well thought-out design made Hyundai products stable and extremely easy to operate. A distinctive fact is the ability to adjust the handle of the device to the user's height for ease of use.The use of its own engine helps to call Hyundai models the most fuel efficient. A four-stroke engine is environmentally friendly as it emits a minimum of harmful products when compared to a two-stroke engine.

The advantages of all models of cultivators from Hyundai:

• adaptation to the most frequently encountered AI-92;
• increased efficiency, which will ensure low consumption of gasoline;
• powerful and excellent internal combustion engine, which has a resource of more than 1500 working hours and an easy start-up system;
• reinforced opener with a special hitch for the use of any mounted tool;
• forged cutters in the form of sabers, which reduce the load on the device when plowing;
• ease of movement and regulation;
• there is no loud noise;
• Convenient motor placement for low vibration.

Electric cultivators are the most suitable type of equipment for high-quality processing of land plots that are not the largest in area. They are great for cultivating or weeding a vegetable garden, hilling beds and many other types of work. Since these products do not emit harmful gases, they can be easily used in a greenhouse or in a winter garden. You need to know that electric cultivators are not bought for plowing virgin and extremely heavy soils - it is best to use gasoline technology here.