Motoblocks forte. model range overview, characteristics, attachments, instructions

Running in

A whole range of measures, called running-in, will help the engine to last a long time without breakdowns. The manufacturer strongly recommends not to abandon the necessary measures, since during this, all parts are lubricated and running-in.

The following procedure will help you get it right:

1. Check oil level
2. Start the motor
3. Leave to idle for 15 minutes. After the specified time, carry out a gas cycle. This means you need to increase the speed to the maximum and reset.
4. In this mode, test the walk-behind tractor for 4 hours.
5. After a while, you can operate at half of the maximum power.
6. Change the oil at the end of the run-in.

Motoblock Forte HSD1G-80

The HSD1G-80 walk-behind tractor is distinguished by its versatility and powerful technical "stuffing". On sale you can find not only the Forte HSD1G-80 model, the reviews of which are the most positive, but also the HSD1G-135. There are other types, the main difference of which is the presence of a 9 or 10 hp engine.

Motor-cultivator Forte HSD1G-80 has a manual start, belt drive, good maneuverability. Only small and uncomplicated areas of soil can be processed, leaving a strip up to 80 cm wide. Most often, this particular model is used to work in summer cottages, and other modifications are suitable for difficult soils. In the modification there is an air purification filter, there is a four-stroke engine with two power take-off shafts, which is fueled with gasoline. A gear drive is also installed, which ensures the equipment passability over the land plot.

For longer and more complex types of work, experts recommend using a 10 hp Forte walk-behind tractor, which is fueled by a diesel engine and has a low level of fuel consumption. You can pick up such models in various series of Forte cultivators, which help to cope with work in summer cottages or fields.

Attachments

The manufacturer "Forte" produces a wide range of attachments for walk-behind tractors. Let's take a closer look at the most popular attachments for working with soil and crops.

Milling cutter

A heavy walk-behind tractor is necessarily equipped with an active cutter. This cutter is powered by a PTO shaft. Models of cutters for mototechnics Forte: device with a capture width of 900 mm.

It can also be used to connect to such walk-behind tractors as Zirka, Centaur, Bulat, Zubr.

Adapter, trailer

Trailer models: АМС-01, АМС-03, АМС-02, АМС-00, TR-M. Adapter models: two-wheeled from the manufacturer UKRPROM (with a seat and a reinforced hitch).

Types of carts: Motor Sich (TS-1), Hyundai TR-1200, Sadko TS-450.

Mower

Recommended types of mowers for motoblocks Forte: belt VM-02, rotary belt Forte, BM-02, GM-04, KR-02, KR-01, KR-09 and others.

Lugs

Recommended types of lugs: double rubber, regular metal. Diameter: 330, 380, 560, 450, 390, 370, 500 mm and others.

Lugs

Plow

Plow for the forte walk-behind tractor: cast iron with a coupling, forte MT-151, a universal plow of the Mole type and others. It is allowed to use plows from such motoblocks as Zirka, Centaur, Bulat, Bison.

Snow blower, blade-shovel

Snow blower models: "Buff" snow blower 6.5 HP manual start 196HS, Forte KSM-56-S, KSM-21 and others.

The dimensions of the used shovels are: width 1 m, 80 cm, 90 cm, possible height: from 30 to 50 cm.

Potato digger

Models of potato diggers for the Forte walk-behind tractor: Premium, KS-PP-4, "Heart" digger, any models of potato diggers from the Zubr, Zirka, Neva, Bulat, Centaur walk-behind tractors.

Potato planter

Potato planter for walk-behind tractor Forte: KSM-1TSU, APK-TsM, KSM-1Ts, UKRPROM KSP-02 and others (bunker, screening, vibration).

Varieties

FORTE HSD1G 105

The functional model is designed to perform various types of work, including:

• hilling;
• weeding;
• cultivation;
• harvesting root crops and so on.

It has a 6 horsepower engine, which gives it the ability to withstand prolonged loads. With the help of the machine, you can process plots with high quality and quickly, since there are 2 speeds available, which makes it possible to perform work quickly.

It is also possible to additionally buy and pick up attachments.

FORTE SH 101

It belongs to professional types of equipment and is equipped with large diameter car wheels. Can work on heavy soils. The set comes with a battery and a plow, due to which you can expand the functionality. If you install a trailer, you can transport goods. Work in the dark is provided by headlights. The car is equipped with a 12 horsepower diesel engine with water cooling, and can be started from the starter or manually. The fuel consumption is 0.8 liters per hour, the gearbox has 6 gears, and the weight is 230 kg.

Applies this type of technique for:

• plowing;
• hilling;
• weeding;
• cleaning;
• mowing;
• transportation of goods.

Forte MD-81

Refers to functional light equipment due to its characteristics. The tank capacity is 5 liters and the motor is water cooled. A 6-speed gearbox is also installed. There is a halogen headlight in front. Power of 10 horsepower allows for difficult work on large areas, and fuel consumption is about 0.9 liters per hour.

The weight is 240 kg. When installing a trailer, you can transport oversized cargo. Suitable for processing plots of 3-4 hectares.

Forte HSD1G-135 and Forte 1050G

These models are equipped with an air-cooled diesel engine with an engine capacity of 7 horsepower. With the help of these devices, it is possible to process plots of land up to one hectare using attachments. A spacious fuel tank makes it possible to operate the car for 5 hours without refueling.

Motoblock Forte MD-101E

Manufacturers have equipped the specified model with a diesel engine. At the moment, MD-101E is the most powerful representative of Forte motoblocks in the lineup. Smoothness of movements during movement of work is guaranteed by two disc clutches. Tillers with 22 knives and 1200 mm working width contribute to higher productivity, and a 10 hp engine. with. will allow the owner to cultivate absolutely any land.

Specifications:

• Fuel tank capacity - 5.5 liters;
• Clutch - dry two-disc;
• Gearbox - gear;
• Maximum trailer weight - 500 kg;
• Weight: 240 kg.

As you can see, the variety of offers from Chinese developers is impressive. Everyone will be able to choose for themselves exactly the option that meets their financial and operational wishes, without any risks. Forte knows what a quality technique is and never ceases to convince the whole world of this!

Maintenance and repair

Regardless of the conditions of use, as well as the quality of manufacture of equipment and its model, it may fail over time and require replacement of spare parts, the reasons may be different. To determine the exact breakdown, it is necessary to make a preliminary diagnosis, and this can only be done by specialists.

Engine won't start

This is a major breakdown that occurs quite often. If the diesel engine won't start, there may be several reasons. Therefore, before starting work, you must perform the following steps to determine the breakdown:

• check the integrity of the fuel system;
• check the amount of fuel supplied to the carburetor.

It may also be necessary to adjust the valves, but such work should not be performed independently without appropriate experience and tools. It should be noted that an instruction manual is supplied to different models of machines, which indicates the main characteristics and technical aspects of servicing the device. Therefore, it is recommended to apply these documents when carrying out repair work, as well as to make an initial full acquaintance with them.

Running in

In order for the equipment to last longer, you must first run it in. The engine and the filter must be filled with oil, and the fuel tank must also be filled. The oil filter is located on the unit in the engine compartment under the protective shields.

After carrying out such events, you can operate the device in normal mode, it is also important to plow it correctly, without giving a large load at low speed, so as not to overheat the motor. The quality of plowing depends on the correct setting of the cutter and the sharpness of the knives.

To assemble the cutter, you need to refer to the operating manuals.

Service

Depending on the type of fuel that is filled into the tank, it is necessary to fill in only high-quality fuel and oils.

It is also important to use original consumable mixtures and elements. The main breakdowns and their elimination are as follows

• Belt slips. There is oil on the pulley, and therefore it is necessary to remove it from there or tighten the belt.
• The clutch slips. The friction disc is worn out and will need to be replaced.
• The clutch heats up. The bearing is damaged, it must be replaced.
• Noise in the gearbox. Poor oil quality or worn bearing. It is necessary to change the fluid and the bearing.

Review of the Forte HSD1G-101 PLUS walk-behind tractor in the video below.

Description

The Forte company has been on the motoblock machinery market for about thirty years. The main feature of the model range is the one-piece metal construction that can withstand very heavy loads. Newer modifications also have a special emergency stop lever for the unit.

Every year the models are being modernized more and more, and this happens on the basis of the basic version, that is, various modifications depart from a certain model. All their characteristics can be either the same, with the exception of some points, or differ significantly.

In this video you will learn more about this walk-behind tractor:

Key Features:

• the equipment is equipped with a gasoline or diesel engine, which has a high classification and is ready to cope with a significant amount of work and loads;
• the fuel tank has thickened walls, which reduces the possibility of leaks;
• the standard motor resource is 1000 hours, and the noise level during operation does not exceed 83 decibels;
• any model belongs to multifunctional devices for agricultural work;
• typical performance is calculated for work on an area of ​​up to 1.5 hectares;
• the main quality is the ability to withstand any loads, including long-term operation during agricultural work in difficult terrain.

Among the models, there are several of the most popular options that differ slightly from their series.

Features of Forte walk-behind tractors

Forte has been creating this type of equipment for more than 27 years, so it tries to equip its "offspring" with innovative details and options that differ from competitors' products.

First of all, attention should be paid to the design features, because the frame is made of very high quality metal tubes, the thickness of which is at least 2.5 mm. It is fixed thanks to a solid part, so it will not break even under severe loads

Often, Forte walk-behind tractors are supplemented with a special handle that allows you to stop the unit in 3 seconds.
A high-end diesel or gasoline engine will be able to cope with serious loads, allowing a person to complete the planned amount of work. The walls of the fuel tank are often quite thick (over 1 mm), which is a significant advantage. The engine operates relatively quietly (maximum 83 decibels), and its service life is 1000 hours. The crankshaft and camshaft is made of very strong and reliable 40 CR metal and extruded aluminum for the housing. However, each model has its own specifics, which you need to get acquainted with in more detail.

Motor-cultivator Forte 1050G

The Forte 1050G 7 HP motor-cultivator is popular with buyers, gasoline on which allows the technique to create a maximum cultivation width of 105 cm. backward is 8 km / h). The vehicle weighs less than the Forte HSD1G-105 model. The total weight of the cultivator is 100 kg, which makes it easy to move the device around the field, create harrows, water and huddle, dig up vegetables, plant them, transport them.

The petrol engine is also produced in the modification of 5.6 and 6.5 horsepower, while the volume of the fuel tank is almost identical and is 210 cm³, which allows you to fill in gasoline with a volume of 3.6 liters at a time.

Between themselves, gasoline and diesel engines with a capacity of 5.6 to 7 hp. differ in the following parameters:

• transport speed on wheels ahead is 5 or 11 km / h;
• the type of oil to be poured can be TAP-15 or TAD-17;
• attachments are selected depending on the model of the walk-behind tractor.

Each of the variants of the Forte 1050 has a gear shaft, which is located on the gearbox, a steering wheel adjustable vertically and horizontally, and a cooling system. The number of maximum engine revolutions is 3.6 thousand per minute.

The package includes a rotary tiller, replaceable wheels, a stop lever. It is recommended to buy a trailer to transport root crops.

Forte range overview

The lineup is based on Chinese capacities, which makes it less expensive compared to its competitors. Almost all models can be equipped with various attachments.

Any option has a wide range of functionality. It should be borne in mind that any unit is tested before going on sale, but this does not cancel the mandatory running-in after purchase.

It is required to remember that there is a basic configuration for each motor-cultivator. For example, for the 105th episode, it includes:

• steel set of cutters of two-piece type;
• pneumatic wheels with aggressive deep tread;
• chrome-plated handle.

There is also an additional equipment that allows you to turn the equipment into a full-fledged agricultural assistant.

All models have their own characteristics, which significantly affect the choice, since each owner has his own requirements, depending on the need for operation.

Before buying this model, you need to find out the characteristics of each walk-behind tractor

For example, a review of the Forte SH 121 walk-behind tractor shows that there are no negative reviews for it due to its very high reliability. But in any case, the prescribed operating requirements must be observed.

HSD1G 101

The Forte HSD1G 101E walk-behind tractor is a diesel model equipped with a 5 liter tank. The main advantage is considered to be the fuel mixture consumption of 0.8 liters per hour.

The equipment is cooled by water. The cultivated area is more than a hectare, which is associated with a power of 10 hp. In total there are 8 speeds in the box, of which two are reverse

The equipment is equipped with 8 cutters. The usual working depth is 20 cm.

MD 101E

MD 101E is a diesel variant, which belongs to the most powerful models not only in the Forte series, but also among similar competitors. Peculiarities:

• smooth movement thanks to two disc-type clutches;
• power 10 hp;
• the grip is 1.2 meters wide;
• installed rotary tillers with knives (22 pieces).

The model can handle any soil, including clay and loam. Power is enough for any type of virgin soil. A headlamp is installed on the front for work in the evening and at night. The unit otherwise has all the positive qualities of the series.

MD 121E

The MD 121E is water-cooled, which makes it possible to operate at high ambient temperatures. The package is standard on the heavy range models and includes headlights, adjustable stick and 6 forward speeds.

The diesel engine produces 12 horsepower, which is quite enough to turn the equipment into a mini-tractor when using additional equipment.

This is interesting: the Celina MB 501 walk-behind tractor.

There is a nuance in fuel consumption during normal operation of 0.83 liters per hour, which is significantly lower than that of competitors of the same type.

HSD1G 105

Motoblock Forte 105 belongs to the middle class and is considered one of the most successful variants of the series. Efficiency coupled with compactness and ease of use influenced its popularity. There are three gears in total, including one back. The tank holds more than 5 liters of fuel, but the consumption usually does not exceed 0.7 liters per hour.

The model is considered all-season and can be equipped with any type of additional agricultural equipment. It is worth considering that the model also includes positive aspects of the brand, for example, a special handle.

Repair of the Forte walk-behind tractor

Repair of the Forte walk-behind tractor should be carried out by specialists or people with experience. The first step is always disassembly and preliminary inspection of all parts. The gradual identification of the problem will lead to the presence of a breakdown in a certain place.

You can repair the engine of this walk-behind tractor yourself

After the repair, a full adjustment and running-in at least 10 hours is carried out. It is required to take into account that if there are worn parts, it is better to replace them immediately, as this will allow not to spoil the new spare part.

Knocks out reverse gear

One of the common problems with the transmission is the moment when it knocks out the reverse gear on the walk-behind tractor when turned on. There are several variants of the problem:

• damaged or worn friction disc;
• incorrect tension of drive-type belts;
• wear of belts.

It turns out that you first need to inspect the belts. Often, if they are worn out or improperly installed, a small whistle may occur during operation. It is he who is the signal for the replacement of parts.

It is worth remembering that all the details must be constantly looked after. This is the only way to completely protect yourself from repair work.

Attachments

The use of additional equipment allows you to significantly expand the capabilities of the walk-behind tractor and use it year-round, depending on the need. For motoblocks Forte, the following types of attachments are provided:

For sowing and collecting various crops, as well as transporting goods:

• Potato diggers
• Potato planters
• Seeders
• Garlic planters
• Trailers

To cultivate the land:

• Cultivators
• Tillers
• Plows
• Flat cutters
• Hillers
• Harrows

For utilities:

• Snow blower
• Shovel blade
• Brushes
• Wood splitters
• Wood shredders

Let's take a closer look:

• Mowers - designed for mowing grass. There are 2 types: rotary and segment. Configurations and sizes are different. Segment mowers have two rows of pointed tines that move horizontally. They are able to cut not only grass, but also small shrubs, but they only work on flat areas. Rotary knives work due to three knives that rotate and cut the grass. They can also work on an incline. The rotary mower is designed in several variations to provide the best fit for a particular model.
• Snow blower, blade-shovel - presented in various configurations and sizes, among which the consumer can choose the most suitable model. The spread of snow by a snow blower can be carried out to 12 m. The blade is a curved steel sheet, which, when the walk-behind tractor is moving, shovels snow to the side.
• The hiller is used to create furrows of various sizes and widths, which in turn are intended for planting. After the seedlings have germinated, the device can be used for hilling the soil.
• The plow is used for plowing dense soil. With its help, it is much easier to plow, while the plow not only loosens the soil, but also turns it over.Plowing is as follows: the first track is made, then one wheel is put into it, and the plow is lowered into the ground. Thus, the second track buries the first. Using this device, you can not only make furrows for further planting of seedlings, but also as channels for water drainage.
• If the plow does not cope and it is necessary to work with hard virgin lands, where there are a large number of weeds and solid objects, then it is better to use cutters to mix the soil.
  The classic form of cutters is saber-shaped - 2 special cutters are attached instead of wheels. The big advantage of this model is its high strength and maintainability. If the cutter is broken or out of order, it can be easily replaced. Another version of the cutter is "crow's feet". Their design consists of a shaft and V-teeth welded to them. However, they are less durable. When colliding with a solid heavy object, they break off.
• The lugs are designed to make it easier to traverse soft and wet soil. They wear instead of wheels and improve traction on the ground.
• Wheels come with a walk-behind tractor, but for driving on snowy terrain, it is best to use tracks, which are worn instead of wheels and increase the traction area of ​​the car with the ground.
• Mounting the adapter on the walk-behind tractor turns it into an excellent means of transportation, facilitates control, allowing the operator to work while sitting.
• The potato digger makes harvesting potatoes easier. The nozzle easily separates the roots from the ground by sifting them through the grid share.
• Trailers turn a walk-behind tractor into a vehicle and allow you to transport various loads weighing up to 800 kg.
• Weights help add extra weight

Motoblock Forte HSD1G-81

The specified Forte walk-behind tractor is really a "beast" in the agricultural sphere, because it can be used to perform absolutely various tasks: planting and digging up root crops, mowing grass, weeding, hilling, etc. The model is equipped with an R180AN engine, the power of which is 8 hp. with. Water cooling provides the required tractive effort. Durability and reliability are achieved thanks to a well thought-out frame, excellent transmission and a new gearbox with additional PTO.

Specifications:

• Fuel consumption - 278 g / kW * hour;
• Power - 5660 W;
• Engine capacity - 452 cm3;
• Drive type - belt;
• The cultivation width is 90 cm.

Significant advantages include large wheels (12 ”) with aggressive tread and serious stability. Since the machine weighs 230 kg, this characteristic guarantees excellent traction.

Operating instructions for motor-blocks Forte HSD1G-81

Features of the Forte HSD1G-81 model

• The presence of six gears forward and two back;
• The presence of a three-strand pulley that allows you to mount a variety of hinges;
• The headlight contributes to better cross-country ability;
• The fuel tank holds 6 liters of fuel;
• The handles are equipped with rubberized grips;

Description

The Forte brand has Chinese roots. The production of component parts is carried out in China. Low cost of equipment should not be equated with low quality, because the company has established itself as a reliable manufacturer.

In addition, a wide network of service centers allows consumers not to worry about purchasing components for equipment. Forte offers a wide range of products, including both light motoblocks and professional heavyweights. The lineup can be conditionally divided into two categories - diesel and gasoline units.

User manual

Complete with a walk-behind tractor, the owner receives instructions for the engine and directly on the car. The instructions contain information on assembly, the main points of maintenance of the device.

First start-up and running-in

The first start-up is done after assembly, with a filled tank and oil sump. Running-in is carried out in several days, usually the device is not loaded at maximum power, but is operated in a gentle mode.

Only when the running-in is completed, you can work with the walk-behind tractor on virgin soil and transport heavy loads.

Running-in is conventionally divided into three stages:

• work in the "idle" mode;
• load on one third of the power;
• work in the mode of two-thirds of the motor power.

The first stage lasts an average of 10 minutes in each gear, the second - 1 hour in each gear, the third - 2 hours in each gear.

Maintenance

Diesel motoblocks: diesel fuel, any brand. Gasoline motoblocks: good quality gasoline, grade 92 or 95. Engine oil type: for 4-stroke diesel or gasoline engines. Be sure to consider the type of cooling (air or water).

Major malfunctions and their elimination

The main malfunctions of Forte walk-behind tractors:

• Belt slippage. Cause: There is oil on the pulley. Remedy: Remove oil and dirt.
• Slipping clutch. Reason: wear of the friction disc; oil spillage on the disc. Remedy: cleaning or replacing.
• The clutch becomes very hot. Cause: too little oil, damaged bearing. Remedy: add oil, replace the bearing.
• There is an incomprehensible noise in the transmission. Reason: bearing wear, damage; poor oil quality. Remedy: replace bearing, fill with good quality oil.
• Transmission does not start. Cause: The gearshift lever is bent. Remedy: repair of the lever.

Motoblock Forte HSD1G-105

This walk-behind tractor is diesel, has 2 types of pneumatic wheels - 4.00-8 and 4.00-10.

Among the distinctive features that distinguish the Forte 105 from the series, it is worth noting:

• the presence of a reinforced gearbox and direct drive;
• installation of a multi-plate clutch;
• reduction of the gear ratio of the gearbox, due to which the walk-behind tractor moves at low speeds;
• increasing the engine life of the engine up to 3 thousand hours.

According to the reviews of manufacturers and owners, the Forte HSD1G-105 walk-behind tractor works great on fairly large areas. With a diesel single-cylinder 4-stroke engine on a walk-behind tractor, you can cultivate an area of ​​up to 1.5 hectares. The volume of the cylinder is 296 cm³, and the power is 6 hp. The size of the fuel tank is 3.5 liters, which allows you to work for several hours without refueling. Diesel fuel consumption, on average, 0.5 l / h. The walk-behind tractor is driven by manual control. The cultivator moves along the ground on a gear drive with three speeds - 2 front and 1 rear. Such technical parameters make it possible to obtain a harrow on the site with a width of 75 to 105 cm and a depth of up to 30 cm.

The model is used in order to process soils of medium and heavy complexity, and it is easy to do this with a cultivator. Together with the equipment, a rotary tiller, a set of keys, spare parts, cutting discs are sold. Additionally, you can buy other attachments that allow you to transport root crops, remove snow.

Motoblock Forte 1050 has many options, which differ among themselves in engines, starters and the size of pneumatic wheels. So, the following modifications can be found in stores:

• a diesel engine and a manual starter are installed on the Forte 1050 cultivator;
• on the 1050E walk-behind tractor, they have already made an electric starter, which works together with a diesel engine;
• the 1050G walk-behind tractor model has a gasoline engine and a manual starter.

Motoblock brand Forte

Manufacturer "Forte" is a well-known Chinese brand that produces a large number of agricultural and technical equipment. This includes: walk-behind tractors, electric cultivators, starters, concrete mixers, power plants, construction and repair tools (such as electric drills). Motoblocks from this manufacturer have a capacity in the range from 6 to 12 horsepower.

Motoblock Forte

Distinctive features of the design are the convenience of the control handles, large protective fenders, a recognizable design, the classic convenient layout of the power units of the walk-behind tractor.

In Russia, Belarus and Ukraine, the Forte technique is widely known and very popular due to its wide range of models. The manufacturer's lineup includes both diesel and gasoline models. Further - a more detailed list of available models of Forte walk-behind tractors, divided into categories by engine type. All heavy Forte walk-behind tractors, in particular, diesel ones, weighing more than 150 kg, are equipped in production with an active cultivating cutter, powered by a PTO, and a conventional plow.

Complete set of walk-behind tractor

Some heavy walk-behind tractors can be equipped with a front transport wheel and seat. Check the complete set of the selected walk-behind tractor model at the time of purchase!

Gasoline motoblocks

The most famous models of Forte gasoline motoblocks:

• HSD1G-80, motor power 6 HP, weight 85 kg;
• 1050g, power 7 HP, weight 1050g - 100 kg;

• 100-G3, 7 HP, weight 97 kg;
• HSD1G-80G3, 7 HP, 85 kg;
• HSD1G 1050G 3.7 hp, 100 kg;
• HSD1G 1050G 8, 7 HP, 100 kg;
• HSD1G 1050G 10.7 HP, 105 kg;

• HSD1G-80MC, 7 HP, 105 kg;
• MK-2K-7.0, 7 hp, weight 95 kg.

Gasoline engine type - single-cylinder, four-stroke, air-cooled. Maximum revolutions per minute - 3600. Start - electric starter, manual start. Refueling fuel: AI-92 gasoline (can be replaced with the AI-95 brand).

Diesel walk-behind tractors

The most famous diesel motoblocks Forte:

• HSD1G-105E - power 6 hp, weight 150 kg;
• HSD1G-105 - 6 HP, 150 kg;
• HSD1G-135, 9 HP, weight 160 kg;
• HSD1G-135E, 9 HP, 160 kg;
• HSD1G-101E PLUS, 10 HP, 240 kg;
• HSD1G-81 PLUS, 8 HP, 210 kg;
• 1350, 9 HP, 160 kg;
• 1050, 6 HP, 140 kg;
• 1050E, 6 HP, 140 kg;

• HSD1G-101 PLUS, 10 HP, 230 kg;
• HSD1G-121E PLUS, 12 HP, 296 kg;
• 1350E, 9 HP, 160 kg;
• MD-81, 8 HP, 210 kg;
• HSD1G-81E PLUS, 8 HP, 220 kg;
• MD-81E, 8 hp, weight 210 kg;
• MD-101E, 10 hp, 230 kg;
• MD-121E, 12 hp, 250 kg;
• MD-101, 10 hp, 230 kg.

Diesel engine type - four-stroke, air-cooled, single-cylinder. The maximum number of revolutions per minute is 3600. Starting - electric starter, manual start. Refueling fuel: local brand diesel.