Description
The developers of the Salyut 5 BS-6.0 walk-behind tractor have embodied the best developments in the field of mini-equipment production in its design. The walk-behind tractor is fully adjusted, configured and ready to work. Salute 5 is optimal for intensive and harsh operating conditions throughout the year.
The scheme of the motor-block Salyut 5 BS-6.0
Engine
The heart of the walk-behind tractor is its engine - B&S Intek I / C OHV manufactured by the Brigss & Stratton concern (USA), whose products are known all over the world for their trouble-free operation. The innovative Intek I / C series is distinguished by unprecedented reliability, the ability to withstand heavy loads for a long time, regardless of weather conditions.
Brigss & Stratton 6.0 engine
Features of the Brigss & Stratton 6.0 engine:
- Power 6.0 HP enough for any work on soil cultivation, planting and harvesting, for other household needs.
- The engine resource is impressive, which is guaranteed by the manufacturer - at least 4500 hours of flawless operation.
- Recommended fuel is AI-92 gasoline, oil of the SF, SG, SH, SJ brands and higher.
After the first 5 hours of running-in, the manufacturer recommends changing the oil completely, then daily or after every 8 hours of operation.
Transmission
The transmission is represented by a V-belt transmission with a tension roller, a gear oil-filled reducer. Recommended brands of oils are TM 5-18 (TAD17I), the scheduled replacement period is approximately 100 hours.
V-belt transmission
The clutch is carried out by tensioning the V-belts. The motor-block Salyut 5 BS-6.0 has two forward gears and one reversible one. The implementation of an additional two forward and one rear speeds is carried out by rearranging the belts. The steering column adjusts comfortably in height.
Pulley
Power take-off for the active drive of trailed equipment is performed from the middle groove of the driven pulley (SHOM). As a drive for stationary units (feed choppers, various machines), the shaft located on the gearbox on the right is used. V-belts for active drive are included in the corresponding attachment kit.
Pulley
Frame
The frame is a structure of stamped squares, on which all the main units of the walk-behind tractor are installed.
Frame
Coulter
The opener - the cultivation depth limiter, is located at the rear of the walk-behind tractor, the maximum working depth is 25 cm.
Coulter
Cutters
Using cutters walk-behind tractor Salute 5 BS-6.0 performs soil treatment. The set includes 4 cultivator cutters with a diameter of 30 cm and axle extensions. The adjustable working width is 35/62/89 cm. The installation of 6 cutters is optional.
Milling cutter
Pneumatic wheels
To transport a walk-behind tractor and transport all kinds of goods on a trolley (up to 500 kg), pneumatic wheels with a diameter of 45 cm are installed. Thanks to the embossed arched tread of the wheels, stable adhesion to the ground is provided.
Pneumatic wheels with a diameter of 45 cm
Coupling bracket
Coupling bracket - designed for hitching passive trailed units directly or by means of a universal hitch.
Coupling bracket
Motoblock Agate
The manufacturer of Agat walk-behind tractors is the Russian enterprise OJSC GMZ "Agat", which this year celebrates its 50th anniversary. The main specialization of the plant since its opening has been units for engines of various models of military aircraft.
Motoblock Agate
Since 2002, the company has expanded its assortment, having received an application for the production of motoblocks for the Salyut trademark. Another ten years passed and the plant decided to create its own brand “Agat” by releasing a line of motoblocks manufactured using innovative technologies on modern high-precision equipment.
Description
This device is manufactured by the international company Redverg, which is one of the world's leading enterprises for the production of various industrial and household gardening equipment: snow blowers, chainsaws, trimmers, brushcutters, etc.
The brand was registered in 1967 and has established itself as one of the fastest growing brands. Today the Redverg company has 6 production units located in the PRC and the USA.
In Russia, the Redverg company presents a line of Ant motoblocks.
It's interesting: Characteristics of popular MTD motoblocks (video)
Specifications
The Volgar equipment is durable and reliable. All their components and mechanisms are of such high quality that they are able to withstand significant loads. The sale of Volgar-2 motoblocks, like other models, is possible only after the machines have passed a multi-stage quality control. The units are equipped with engines from Russian, Japanese and Chinese manufacturers. But at the same time, all motoblocks have identical frames, chassis and support systems.
Machines from this manufacturer have good technical characteristics. They feature a carbureted, single-cylinder, four-stroke engine that is air-cooled. The average power of the machines is 7 liters. with. The transmission is presented in the form of a cast-iron gearbox with a gear-type transmission. The vehicle weighs about 107 kilograms, there are forward and reverse speeds.
The wheels are characterized by deep tread. Significant power and weight of motoblocks allow high-quality loosening of the soil using a cultivator to a depth of 0.3 meters. In this case, the machine captures a strip of soil 1 meter wide. In the basic configuration of motoblocks, there are cutters and openers. The expansion of the functionality of Volgar units is facilitated by a variety of attachments that can be easily attached to walk-behind tractors.
Video review
We offer short videos showing these Redverg walk-behind tractors in operation:
Evgeniy, 39 years old:
A very powerful, efficient and functional unit. Build quality is decent, enough power for both the trailer and the plow. I have been working for the third season, there are no faults. The Redverg walk-behind tractor is comfortable, the handles are adjustable, the headlight allows you to see the road in front of you and in the dark
Sergey, 52 years old:
I have a Redverg Ant. It justified its name one hundred percent. Small, agile and robust. I have not tried it with a plow yet, but milling is at a height. There were no problems with starting up after downtime.
Peter, 58 years old:
Redverg is a very economical walk-behind tractor, fuel consumption is no more than 1 liter per hour. In addition, it is irreplaceable with hinges on the site.
User manual
Each owner of a Redverg Muravei brand walk-behind tractor should be familiar with the basic rules regarding the safe operation of the machine, the rules of its management and maintenance. To obtain this information, it is enough to read the instruction manual.
First start-up and running-in
From the factory, motoblocks of the Redverg Ant brand are delivered disassembled. For their correct assembly, you can use the instruction manual or a video review from thematic forums.
At the initial stage, it is recommended to use the Ant Redverg walk-behind tractor in the running-in mode so that the engine parts are lubricated with each other and prevent the appearance of high friction on the engine parts and their early failure.
After the end of the break-in, the user manual recommends changing the engine oil.
Service
Motoblocks of the Redverg Ant brand are distinguished by their ease of maintenance. The schedule for their implementation is clearly described in the user manual.
Before each drive, check the presence of fuel and lubricant, the electrical wiring, and the absence of oil leaks.
- The oil in the engine must be changed after 25 operating hours, since during this time a large amount of mechanical impurities is formed in it, which can lead to further failure of the engine parts. The operating instructions recommend the use of SAE 10W-40.
- The transmission oil must be changed after 100 hours of operation.It is recommended to pour Tap-15v or Tad-17i into this unit.
- In spring and autumn, it is necessary to lubricate the gearbox shift levers with water-resistant grease such as Litol or Solidol.
- After completing work with the Redverg Ant walk-behind tractor, remove the remnants of dirt and dust from the device and attachments to prevent rusting of the machine.
Repair of basic faults
Despite the fact that the Redverg Ant walk-behind tractor is manufactured in China and the USA, in Russia you can always find spare parts for these machines, since they are designed on the principle of replaceability.
If the motor is not stable or does not start at all:
- Check the amount of oil and fuel, top up if necessary;
- Inspect the spark plug, remove carbon deposits from it or replace it with a new one;
- Check the connection of the terminals to the spark plugs and if there is a spark;
- Clean the air and fuel filters, they must be cleaned every 50 hours of operation;
- Adjust the fuel mixture in the carburetor;
- In the event of more complex breakdowns, it is recommended to contact the service center.
If there is a big vibration from the walk-behind tractor:
- Check the aggregation of the attachment;
- Make sure the bolted connections are tight on all nodes;
- Check the quality of the fuel and whether there is water in it;
- Clean air and fuel filters.
The lineup
Volgar machines are offered to users in a large assortment. Some of the best models, according to consumer reviews, are the following.
- "RedVerg Volgar-2" has a weight of 108 kg. The unit has a gasoline engine, starting from a manual starter. The walk-behind tractor is characterized by a reinforced steering column in two planes. The machine has a disc clutch, it is capable of grasping soil 1 meter wide. The cutting depth of the cutters is 0.3 meters, while the unit has 3 speeds.
- "RedVerg Volgar-2MF" is a model of a walk-behind tractor with a weight of 115 kilograms and a capacity of 7 liters. with. The unit has a manual engine start, a manual transmission with two forward and one reverse speeds. The clutch is of a disc type. In addition, the walk-behind tractor has a hood with a built-in headlight, as well as a folding-type step. With a power of 7 liters. with. the machine captures 1 meter of soil in width and can immerse the implement into the soil up to 0.3 meters.
Attachments
The range of capabilities of the walk-behind tractor is increased due to the capabilities of complementary parts. The standard equipment includes a cutter. The tool adds uniformity to the topsoil. It is more fertile. RedVerg offers a saber cutter design that retains its strength for a long time. If the soil in the area is heavy, it is better to use a plow to work it. The surface treated with this tool will be less uniform, with few clods of soil. A distinctive feature of the RedVerg plows is the width of 18 cm. Thanks to this share, large blocks will break.
Mowers mounted on a walk-behind tractor can easily cope with the processing of large lawns, heavily overgrown areas. The attachment tool can easily tackle even bushes with the help of rotating knives. The potato digger and planter can help automate the hard work of planting and harvesting potatoes. The snow blower will cope with snow removal over large areas. It has already been appreciated by both private homeowners and responsible utility owners. An adapter with a trailer makes the task of transporting goods easier. It is offered in a wide variety of options.
When choosing, you need to pay attention to its carrying capacity and dimensions.
