Motoblock tarpan: owner reviews

Specifications and prices of models

Motoblock Tarpan, the technical characteristics of which we will consider further, began to be produced since 1991. Factory specialists annually improved the basic characteristics of the model, wishing to make the unit competitive among motoblocks.

However, in 1995, it was decided to suspend the production of Tarpan motoblocks, considering this business unprofitable. However, thanks to the enthusiasm of individual specialists, the new Tarpan with a foreign engine from Briggs & Stratton received quite good reviews, which led to the serial production of the model.

Since 1997, a new era of Tarpan motoblocks begins, due to the annual growth in production rates and an increase in the competitiveness of this brand.

The range of Tarpan motoblocks is not very large, including several models, which will be discussed below.

07

Motoblock Tarpan 07, as well as motoblocks Hooter, Profi, Plowman, Champion, is a rather multifunctional device designed for plowing land.

In addition, using attachments, this walk-behind tractor can carry out a wide variety of work: hilling, transporting various loads, mowing lawns, etc.

Specifications:

• the type of motor used - 4-stroke, carburetor type;
• number of cylinders - 1;
• engine volume - 160 cm3;
• power indicator - 6 hp;
• start type - manual;
• motoblock length - 1400 mm;
• walk-behind tractor width - 560 mm;
• motoblock height - 1090 mm;
• total weight - 67 kg;
• processing width - about 70 cm;
• loosening depth - 20 cm;
• fuel consumption - 1.1 liters per 1 hour of operation;
• fuel tank capacity - 1.1 l;
• clutch type - V-belt;
• reducer type - gear.

TMZ MB 07 01

Motoblock Tarpan TMZ MB 07 01 is the largest unit in the Tarpan family of motor-blocks. Unlike other models, a snow blower can be attached to this walk-behind tractor. The cost of this unit is about 35-37 thousand rubles.

TMZ MK 03

Motoblock Tarpan TMZ MK 03 is considered one of the most common models in its class. The engine for the Tarpan walk-behind tractor can be very different (this information is indicated in the model name, next to the serial number).

In particular, it can be equipped with an American Briggs & Stratton (B&S) engine or a Japanese Honda engine.

Specifications:

• the type of motor used - 4-stroke, gasoline;
• gasoline brand - AI-92;
• number of cylinders - 1;
• engine volume - 160 cm3;
• power indicator - 5.5 hp;
• start type - manual;
• motoblock length - 780 mm;
• walk-behind tractor width - 700 mm;
• motoblock height - 750 mm;
• total weight - 45 kg;
• processing width - about 70 cm;
• loosening depth - 20 cm;
• fuel consumption - 1.1 liters per 1 hour of operation;
• fuel tank capacity - 1.1 l;
• clutch type - V-belt;
• reducer type - gear.

This Tarpan walk-behind tractor, the price of which is about 27 thousand rubles, will be the best purchase for owners of small gardens. The rather small dimensions of the device do not allow installing the entire list of attachments on them, so this fact must be taken into account when buying.

Motoblock Tarpan, the description of which we have just considered, allows you to aggregate with it a wide variety of attachments. This fact significantly expands the scope of the unit, allowing it to compete with many foreign models of motoblocks.

Attachments

Motoblocks MTD are in demand due to their versatility. With the help of additional attachments, they are able to automate a large amount of agricultural work.

Milling cutter

The cutters allow mixing and homogenizing the topsoil.

The maximum width of capture of cutters and the depth of their immersion for each model of MTD has its own

Therefore, you need to pay attention to this when choosing a device.

Plow

Motoblocks MTD are durable and can even process virgin soil with milling cutters, however, with stony soil, it is still recommended to use a plow.

He enters the soil and turns it over and over again. Reversible plows have a special plowshare design that allows the soil to roll over on it several times, break up large piles of soil, and only then throw it aside.

Mower

A mower can be connected to MTD walk-behind tractors. This attachment allows you to clear areas with large thickets of weeds, or to maintain the level of grass in parks and lawns.

The most common version of the mower is rotary; they cut the grass using rotating knives.

Hiller

When potatoes are grown, it must be spilled periodically to increase the yield. Motoblocks MTD can help in carrying out these works.

The manufacturer offers disc hillers, which, when the device moves, rotate and throw soil onto crops.

If there is no hiller at hand, then you can use a regular plow. However, in this case, it is necessary to be extremely careful, since there is a possibility of digging out crops before they ripen.

Potato digger

Motoblocks MTD can dig out potatoes using a potato digger. It looks very much like an ordinary plow with welded steel rods.

While driving, he picks up a layer of earth and directs it to the rods, where they break and leave only fruits on the surface.

water pump

The garden must be watered periodically so that the crops grow and do not wither. Previously, special pumps were used to irrigate land.

water pump

Now the MTD walk-behind tractor with a pump can irrigate a plot at a distance of up to 50 meters.

Adapter and trailers

When working with MTD walk-behind tractors, quick fatigue sets in due to the fact that it is necessary to follow them on foot. And this is not always convenient, therefore, to facilitate the work, the owners purchase adapters.

Adapter

They are special attachments with a seat that allow you to control the MTD walk-behind tractor in a sitting position.

If you need to transport goods without a trailer, you can't do it. The maximum carrying capacity of each MTD model is different, however, this value is at least 300 kg.

Trailer

Experienced owners recommend using tipper options. They will help in carrying out unloading operations. Simply raise the trailer from the front.

Wheels, lugs and tracks

As standard, MTD walk-behind tractors come with pneumatic tires for transportation and cutters. Wheels are also needed to work with other attachments.

Lugs can be used to increase traction. Their metal plates enter the surface and allow the walk-behind tractor to move more stable.

In the winter season, MTD walk-behind tractors will slide on the ice surface. And in some situations it becomes almost impossible to manage them. Tracks can be used to fix this. They increase traction with a larger contact area.

Weights

If you do not have lugs, but you need to increase the grip of the MTD walk-behind tractor, then this can be done by installing additional weighting materials. They are produced in the form of barbell pancakes and are hung on the wheel axle.

Modification of the Tarpan motor-cultivator

There are various options for completing the Tarpan motor-cultivator with your own hands. An interesting example is the conversion of the 031 Tarpan into a small tractor.

For this alteration, a powerful metal frame is made and two small wheels are attached to the front. The rear wheels are those that are part of the cultivator design.

A device for attaching attachments is installed at the back.

The Tarpan motor-cultivator is widely used in Russia. It has built a reputation for being efficient, reliable and practical.

vote

Article Rating

User manual

Before starting work on the Tarpan walk-behind tractor, you should read the instruction manual. It describes how to handle the equipment and how to work safely.

In addition, the operating instructions provide a maintenance schedule and solutions to the most common failures.

First start-up and running-in

The Tarpan walk-behind tractor is delivered to the new owners in a mothballed state. In order to start its full-fledged operation, it is necessary to reactivate it:

• Flush the spark plug with gasoline;
• Connect the ignition wire;
• Assemble individual units and the device as a whole;
• Fill the engine and gearbox with oil;
• Add fuel.

The manufacturer recommends that the first 12 hours of machine operation be run in. During this time, it is not allowed to load the motor as much as possible. You should use it at a third of the maximum power.

Service

The operating instructions recommend regular maintenance of Tarpan walk-behind tractors:

Perform the following manipulations daily:

• Clean and wipe the walk-behind tractor;
• Wipe off the protective grilles and around the muffler;
• Visually inspect for oil leaks;
• Control the tightness of the fasteners;
• Check the oil level in the box, transmission and engine.

It is recommended that every 25 hours of operation:

• Change the oil in case of intense load on the engine or use at high temperatures (it is recommended to fill in engine oil with a classification of 10W-30);
• Clean the air filter;
• Adjust the V-belt transmission.

Correcting faults

Each owner of the Tarpan walk-behind tractor should know how to repair the main faults:

If the engine does not start:

1. The throttle control lever is in the minimum position (it is necessary to turn the lever by ¼ of the maximum stroke);
2. There is no fuel supply to the carburetor (check its availability and pump up if necessary);
3. Air filter clogged (clean or replace);
4. Defective ignition system (clean or replace the spark plug, set the gap);

If the engine overheats during operation:

1. The air filter is clogged (clean it);
2. The cooling system is clogged (clean it - the outer surface of the motor).

Fuel consumption by a motor cultivator depending on loads

Despite the not too high power of the unit and its modifications, it consumes a significant amount of fuel. In the process of plowing the soil, the model requires about 1.5 l / h. This figure may vary depending on the task being performed.

So, when processing hard soils with a plow, the cultivator consumes at least 1.8 liters / hour of work. When removing snow, it "eats" at least 2 liters. fuel

However, it is important to take into account that a certain amount of fuel is consumed even when the engine is warming up.

When hilling potatoes, the cultivator requires, on average, 1.6 liters. fuel, and when working with a rake - about 1.5 l / h. work.

Peculiarities

Small agricultural machinery is being assembled at the large Russian enterprise Tulamashzavod (TMZ). This holding includes more than 20 manufacturing companies engaged in the production of civilian and military products. Direct assembly takes place at the Tulamash-Tarpan subsidiary, which manufactures small agricultural machinery.

Light cultivators "Tarpan" are equipped with gasoline engines of American, Japanese, Russian production. They all have roughly similar characteristics and layout. However, the power of the Briggs & Stratton Quantum engine, produced in the USA, is slightly higher than the others - 6 hp. with. Features of the device:

1. Long-life worm gearbox. The precision of the parts manufacturing, the build quality and the selected materials ensured the high reliability of the assembly.
2. Adjustable plowing depth. Depending on the position of the support arm, the machining amount can be set between 16 and 25 cm.
3. Adjustable cultivation width. The required size is obtained by installing a certain number of pozvofrez.
4. Modular design. Dismantling the unit into large units allows it to be transported in the trunk of a car.

Features of Tarpan cultivators

Russian motor-cultivators of the Tarpan brand are optimal for farmers who own plots of no more than 15 acres. This technique has earned recognition for its reliable motor and quality assembly. Most of the models are equipped with American Briggs & Stratton engines, ranging from 5 to 6 hp. with. The main features of the units include:

• Almost eternal worm-type gearbox;
• High-quality transmission, which makes it possible to move at several speeds;
• The plowing depth ranges from 16 to 25 cm;
• The width of the strip ranges from 25 to 100 cm;
• Improved grip due to the use of more reliable spark plugs;
• The ability to use many options for attachments.

These Russian cultivators can be operated even on virgin soil. At the same time, the manufacturer promises a fairly high performance - about 2 acres per hour of work.

More modern models of the Tarpan brand are equipped with improved Honda, Zongshen and Champion engines. They are less powerful, but their high build quality allows you to use the cultivator without worrying that it will stall from overheating.

Design features of the units

The Tarpan motor cultivator in the old configuration is equipped with a four-stroke gasoline engine of the Briggs & Stratton Quantum brand, produced in America, although every year the manufacturer produces more and more models with Japanese Honda engines. The power of the American engine is 6 liters. with., and Japanese - 5.5 liters. with. Each of the engines is equipped with an air cooling system, which makes it possible to repair the carburetor much less often than in the case of other brands of cultivators. This is due to the fact that air enters not only the engine for cooling, but also into the carburetor, enriching the fuel mixture. This process has a positive effect on the longevity of the carburetor.

During operation, the worm-type gearbox transfers engine speed to the cutters, which are equipped with a mechanism for adjusting the depth of soil cultivation. In the maximum low position of the regulator, the cutters are lowered to a depth of 20 cm. The width of the covered strip during operation is from 35 to 100 cm. To move around the plot, the cultivator is equipped with two wheels.

The unit controls are located on the steering wheel, which can be adjusted in height. The handlebars are rubber coated and comfortable enough to grip. The tilt of the steering bar can be adjusted to change the tilt of the implement or turn it around.

It's interesting: What is a Texas walk-behind tractor

Is it worth buying a Tarpan motor cultivator

Two wheels are installed for rolling the walk-behind tractor. And in order to regulate the depth of the cutter, a coulter is installed. The walk-behind tractor itself can be easily disassembled into two parts. The casters and handles are removable. This makes it easy to fit into the trunk of a car.

The main feature of Tarpan is a rather powerful engine, in comparison with other motor-cultivators of this class. Unfortunately, the designers did not provide for a reverse gear, which is a big disadvantage. The worm gear of the gearbox was installed in a fairly robust housing.

Unfortunately, it does not have a reverse stroke due to the large gear ratio. When processing heavily planted areas, it is quite often necessary to pull out the cultivator in reverse. This usually happens in places where a reversal is not possible.

In this case, the cutter does not turn back, it skips and unfolds what has just been loosened. It is for this reason that gearboxes with toothed wheels or with chain drives are installed in modern cultivators. If a worm gearbox is installed, then only with reverse gear.

Therefore, Tarpan is very convenient for the owners of open gardens, and for those who will prepare the soil for further processing and sowing.In this case, there is no great need for the convenience of controlling the walk-behind tractor in reverse gear.

Clutch and speed of the Tarpan motor-cultivator

The following design features of the cultivator are an automatic centrifugal clutch and a split "leg". This allows it to be disassembled into two parts and folded into the trunk of the car, which is a definite plus. On the other hand, due to this feature, the clutch "often flies out" when working with a hiller, plow, digger. If you use an automatic clutch, it has a large response inertia, which is unsafe.

To turn on the speed, to start the cutter, you need to turn the throttle lever. This will increase the RPM, after which the cutter begins to rotate. If it is necessary to stop the cutter urgently, the operator must remove the gas. This will not immediately turn off the cutter, and it will continue to run for a while. In this case, you need to use the "Stop" button.

Also in the structure of the motor-cultivator, a new design of the steering rod is used, which allows it to be turned 360 degrees and to adjust the angle of inclination. This allows the operator to walk next to the cultivator and not on cut furrows or loosened soil.

If you install additional equipment on the Tarpan motor-cultivator, then it will be able to weed, huddle, harrow, loosen, mill, etc.

Advantages and disadvantages

The cultivator has been produced under the Tarpan brand for over 25 years. However, the first models that rolled off the assembly line were not very reliable. Users constantly turned to service centers for warranty repairs and planned to abandon production. But the renewal of the material and technical base of the plant and the improvement of the assembly technology made it possible to organize the production of high-quality machines for cultivating the land. Among the advantages are:

1. Modular design. The device is easy to disassemble, transport, service.
2. Possibility of installing the power unit on auxiliary equipment (mowers, seeders, snow blowers).
3. Centrifugal clutch. Automatic engagement of the drive when the engine reaches high revs allows the device to operate smoothly, without jerking, which reduces the dynamic load on the operator.

In addition to the positive aspects of a lightweight and simplified design, the device has a number of negative aspects. Disadvantages of cultivators:

1. Lack of a full-fledged transmission. Agricultural implements have only one forward speed. The impossibility of self-propelled movement back greatly complicates the work in small areas and densely planted beds.
2. The vertical position of the motor makes it difficult to change the oil. With intensive use of the device, the procedure has to be performed several times a season, and for this it is necessary to dismantle the clutch.
3. The design of the cutters helps to wind the stems of plants and their roots around them.

Repair instructions

Motoblock Tarpan, as well as walk-behind tractors Cayman, Patriot, Texas, Foreman, Crossser, Viking, Forza, Sadko, Don and their repair instructions represent a fairly standard list of problems with optimal solutions that are almost the same for all types of walk-behind tractors.

Let's consider the main problems that the owners of this walk-behind tractor may have, as well as methods for their elimination. Motoblock Tarpan and its malfunctions:

• The Tarpan walk-behind tractor does not start. In this case, there may be several reasons: there is no fuel supply to the carburetor, the air filter is clogged, or the ignition system does not work. Accordingly, the solution to the problems will depend on the given reasons.
• In the first case, you need to check the presence of fuel in the fuel tank, then press the suction several times. In the second case, it is necessary to clean the filter from foreign particles.
• And finally, in the third case, the spark plug for the Tarpan walk-behind tractor may be faulty, which will have to be replaced with a new one. If the candle is still working, then it is necessary to remove the existing carbon deposits from it. Cm.new candle in the photo:

• Engine overheating is observed. The reason for this, as in the first problem, is a clogged air filter that needs to be cleaned.
• The output shaft of the gearbox is not working. In this case, the reason may be incorrect operation of the clutch. It is necessary to adjust the V-belt transmission, then wipe the pulleys dry.

Such repair of the Tarpan walk-behind tractor with your own hands is quite real at home. But there are certain breakdowns that will require contacting a specialized service center. In particular, it is recommended to change the oil seals in the gearbox in such centers, because there is a risk of incorrect installation if you do it yourself.

Cultivators

There is already a whole line of Tarpan motor-cultivators, which mainly differs in the installed engines.

Motor-cultivator Tarpan with Briggs and Stratton engine.

This machine is equipped with a 5.5 horsepower gasoline engine and is designed to facilitate summer cottage work - plowing weeding beds, planting and hilling potatoes, preparing the soil for planting crops.

Motor-cultivator Tarpan engine Briggs & Stratton

Specifications

• Engine Builder - Briggs & Stratton;
• Engine - gasoline 4-stroke - "B&S" Qvantum - (USA);
• Engine power - 6.0 hp;
• Clutch - dry, automatic, centrifugal;
• Reducer - single-speed, worm gear in oil bath;
• Maximum working depth - 200 mm;
• Capture width - 350, 700, 1000 mm;
• Fuel consumption - at max. load 1.1 l / h;
• Productivity - 0.06 ha / hour;
• Overall dimensions (control handles folded) - 1300x700x1060 mm;
• Weight - 45 kg.

Motor-cultivator Tarpan with Champion motor

This walk-behind tractor has similar technical characteristics with the previous model, it differs only by the engine manufacturer.

Motor-cultivator Tarpan with Champion motor

Specifications

• Engine: Champion China
• Power: 5.5 HP
• Reducer: Worm
• Speeds: 1-Forward
• Plowing depth: 20 cm.
• Plowing width: 56 cm.
• Warranty: 1 year
• Clutch: Centrifugal, automatic
• Features: Dismountable
• Type: Gasoline 4-stroke
• Weight: 45 kg.
• Packing size (LxWxH), mm: 710x400x750

Motor-cultivator Tarpan tmz mk 03-01 with Weima engine

This car is equipped with a 3.7 hp gasoline engine. It is intended for the mechanization of various agricultural works on plots with an area of ​​up to 0.2 hectares. If we compare its work with a plow, then the tmz mk 03 motor-cultivator loosens the soil better, crushes and removes weeds.

Motor-cultivator Tarpan tmz MK 03-01 with Weima engine

Specifications

• Manufacturer: Tulamash-Tarpan LLC
• Weight: 34.00kg
• Engine: 4.0 hp WM1P65F
• Engine type: 4-stroke,
• Speeds: 1 forward,
• Processing width: 36 cm.
• Working depth: 18 cm
• Fuel tank volume: 1.6 l.

Electric cultivator Tarpan KE 0.7-2.2

Many buyers are now looking for electric cultivators to work in indoor greenhouses or gardens. Tulamashzavod offers for them an electric cultivator Tarpan KE 0.7-2.2.

Electric cultivator Tarpan KE 0.7-2.2

This is a simple machine that is capable of crushing and loosening the soil, as well as uniform mixing of fertilizers.

Specifications

Walk-behind tractor device and principle of operation

The walk-behind tractor consists of the following main units:

1. Power unit, which includes:
   • internal combustion engine;
   • docking mechanism;
   • automatic clutch;
   • governing bodies.
2. The executive block, which consists of working mechanisms:
   • reducer;
   • rotary cultivator;
   • deep regulator.

Power units with the following motors can be used in the Tarpan unit:

• with carburetor 4-stroke engine Briggs & Stratton (USA), model 12/802;
• with Honda engine (Japan), model GCV-160.

The working volume of the Briggs Stratton is 190 cm³, the Honda - 160 cm³.

At the same time, the Briggs internal combustion engine with forced air cooling allows the development of power up to 6 hp, the service life is within 1000 hours. The maximum power of a motor cultivator with a Honda engine is 5.5 hp.

The steering of the unit is simple and convenient. This working body adjusts the position of the handles. When the steering wheel is turned to a horizontal plane, the soil is cultivated. When transporting equipment, the steering wheel on the walk-behind tractor is turned towards the engine.

Using the remote control lever, change the engine speed or stop its operation.

The centrifugal clutch starts the walk-behind tractor. When the required number of engine revolutions is reached, a large torque is transmitted to the gearbox.

A 1-stage worm gearbox with an oil bath serves to transfer power to the working bodies of the machine.

Tillage is carried out with a rotary cultivator. Cutters with a diameter of 320 mm at rotation, the top layer of the soil is loosened, a part is cut off, crushed and mixed, while the walk-behind tractor begins to move forward. The tillage width is 560 mm. When aggregating additional equipment, the working width increases to 1 m with a plowing depth of 180-200 mm.