Major breakdowns and their elimination
The attachment does not rise:
- The oil level in the hydraulic system has dropped below the minimum mark (add oil);
- The hydraulic pump is off (turn it on);
- Hydraulic safety valve hangs up (disassemble and clean valve).
The brakes do not work:
- Pedal free travel has increased (adjust its position);
- The brake disc or pad is worn out (replace the corresponding parts).
The engine does not run stably:
- The fuel level has dropped below the minimum mark (it is necessary to top up);
- Stretching the belts (must be correctly aligned);
- Clogged fuel or air filters (clean them);
- The carburetor is clogged due to dirt (it must be disassembled, washed and cleaned);
- Problems with the ignition system (most often the plug comes off, or it has become unusable).
Review of Rossel mini tractors
Rossel mini tractors are manufactured in the Netherlands. They are powered by reliable Japanese Kubota or Kama diesel engines. These devices are distinguished by high quality components and a low price. The dashboard provides the owner with all the necessary information regarding the condition and running of the machine.
Rossel mini tractors are equipped with an automatic differential lock. The ground clearance for the entire range of Dutch cars is fixed at 0.45 m. The three-point hitch supports a wide range of attachments. The hydraulic pump allows you to mount the hitch, both in front of the machine and behind. For ease of control, the tractor is equipped with a power steering.
Rossel mini tractors are used when working on farm land, summer cottages and when transporting goods. To operate this device, rights are not required, and, according to user reviews, any person who has read the operating instructions can handle it.
Adjusting the track size allows you to work crops after they have risen.
The position of the Rossel mini tractor seat can be adjusted for the height of each operator in the horizontal and vertical planes.
User manual
During the first start, you should pour engine oil and diesel fuel into the mini-tractor, and only after that start the running-in process. The peculiarity of this procedure lies in the use of the machine only 30 percent of all its capabilities. Thus, high-quality lubrication of each motor unit will occur. The run-in time should be 10 hours, after which the oil must be drained.
After all kinds of field work are completed, the unit should be sent for conservation. For this, the following procedures are performed:
- the car must be sent to a closed dry room;
- then it is worth carrying out the process of draining engine oil, fuel;
- after that, dust and dirt must be removed from the unit;
- finally, remove the battery together with the candles.
The lineup
Rossel XT-184D
This mini tractor is equipped with a Kama engine with a power of 18 hp. Buyers note the long service life of the Rossel XT-184D engine.
Mini tractor Rossel XT-184D
- The gearbox has 8 steps (6 forward and 2 reverse). The highest driving speed reaches 42 km / h.
- The Rossel XT-184D mini tractor weighs 550 kg, which is enough for field work and driving on country roads.
The buyer receives a complete set of delivery: the machine itself, a swivel hitch, an active milling cutter and a basic set of tools.
Rossel RT-242D
According to user reviews, this machine is considered the ideal companion for field work in medium-sized areas. It is equipped with a Japanese diesel three-cylinder engine with a capacity of 24 horsepower, which allows you to carry out even the most difficult jobs with the RT-242D mini tractor.
Mini tractor Rossel RT-242D
The plunger pump is capable of working with low-octane fuel, and you should not use a dirty diesel engine, in order to avoid serious damage.
- The checkpoint has 8 steps (6/2).
- The weight of the Rossel RT-242D mini tractor reaches 1100 kg.
Rossel RT- 244 D
This machine is equipped with a 24 hp Japanese Kubota diesel engine, which is powered by an electric starter.
The weight of the Rossel RT - 242 D mini tractor reaches 1300 kg, thanks to which the machine perfectly manifests itself when driving off-road and country roads.
The maximum immersion depth of the attachments is 25 cm.This is enough for high-quality plowing and milling of the land with the mini tractor Rossel RT-244 D.
Rossel XT 152 D
This representative of the Rossel mini tractors range is designed for work in small areas.
The small overall dimensions of the Rossel XT 152 D (only 214x91x118 cm) make it possible to use the machine in a warehouse or in other confined spaces.
Mini tractor Rossel RT-244 D
The Rossel XT 152 D weighs only 540 kg.
This model is equipped with a 15 horsepower water-cooled diesel engine.
The complete set of delivery of Rossel XT 152 D includes an active milling cutter, a reversible plow, an operating manual and a set of basic tools.
Attachments
The popularity of Rossel mini tractors is due to the wide range of work performed, thanks to the aggregated attachments:
Milling cutter
It is used when mixing the top layer of soil in order to increase fertility.
It is used to reduce lumps left after milling the soil.
Stubble plows
This is one of the varieties of cutters, only instead of knives they have metal plates in the form of a saw, which not only raise the lower layer of the earth, but also immediately grind it.
Cultivators
This hitch is used to trace the position of the beds before planting crops.
To give homogeneity to virgin or unprepared lands, it is best to use plows, they sink deeper into the ground and allow you to work even stony soils. Mini tractors Rossel can work with two plows at the same time.
Trailers
When transporting goods, you cannot do without a trailer. It is better to choose tipper carts with drop sides. They can significantly save time on loading and unloading processes.
PPTS-2 trailer
Mowers
Rotary mowers are used for harvesting hay for the winter in rural areas and for maintaining park areas in order by utilities.
Rake
After cutting the weeds, to collect them, you can connect the rake to the Rossel mini tractor.
If it is necessary to automate work with potatoes, a potato digger (for digging) and a potato planter (for sowing) are connected to the Rossel mini-tractor.
This attachment mainly used by utilities when it is necessary to remove a layer of snow to the side for a distance of more than 10 meters.
Shovel blade
To remove snow from the road surface and roadside areas, blade-shovels are used. They can significantly increase the speed of snow removal. It can reach 15 km / h.
Description of the mini-tractor Rossel
It is the mini-tractor that will enable its owner to save the time required for tillage, and labor costs when using such equipment are significantly reduced. Moreover, you don't need more to work on a small personal plot.For example, the Rossel RT 242d mini tractor, which is one of the leaders in terms of technical characteristics among its brothers in the model range, is ideal for this. When working in the field, this technique shows itself at its best.
Rossel is a subsidiary of a large concern for the production of specialized, incl. agricultural machinery NewHolland. All Rossel equipment can be distinguished from similar ones in a number of characteristics:
- constructive simplicity;
- high quality performance of both the entire mini-tractor as a whole and its individual components;
- modern technology design;
- impressive technical characteristics.
All these points make it clear that the company's designers treat the quality of products with great attention and impose the most stringent requirements on it.
Where is the Rossel technique applied?
Rossel's latest tractors offer a wide range of applications. They can be used not only during agricultural, but also, if necessary, communal works.
Rossel tractors are easy to maintain and use and are not too expensive. The engine is started with an electric starter to obtain the best possible tractive effort.
A rotary tiller (active) and a rotary plow are supplied with the mini tractor. They are switched on by means of a high reliability hydraulic system.
The user will be able to adjust the track width depending on the tractor model. This can be done by placing the wheels on the axle shafts. The designers have foreseen the desire of the consumer to adjust the controls of the system - this is also possible.
When working on a tractor, you can comfortably fit in it. Manufacturers have made it so that the steering column can be set in a comfortable position, the seat can be moved forward or backward, and the seat back can be tilted at a convenient angle for the driver.
Rossel mini tractors, customer reviews: what do they testify to? It is quite difficult to find negative reviews from buyers of Rossel equipment. If the authors of the reviews find any drawbacks in mini tractors, they are more than compensated by the positive characteristics of the manufacturer's agricultural equipment.
Among the shortcomings, buyers highlight the loud operation of the minitractor engine and the absence of a seat belt in the cab.
Nevertheless, most of the users agree that such disadvantages are insignificant, and pays attention first of all to the advantages. It is noted that in winter the tractor starts up "with half a turn", and even in severe frosts, Rossel equipment still continues to work without interruption.
Almost all authors of reviews on the manufacturer's mini tractors ultimately recommend this agricultural equipment for purchase, characterizing it as an indispensable assistant when working in the field or on a personal plot. However, buyers note that, despite the ease of handling and maintenance, tractors still require "skillful hands". Therefore, before you buy this unit, you should familiarize yourself with the maintenance technique of such mini tractors.
Technical characteristics of Rossel mini tractors
Each Rossel mini tractor is equipped with a powerful engine, because buyers pay attention to it first of all. So, an engine with a power of 24 hp is built into the model of the Rossel 242 mini-tractor.
- the most powerful of all in the company's line of tractors.
The same engine was installed in the Rossel RT 244d mini tractor. These 2 models have a completely identical engine: a volume of 1700 cm³, a 4-stroke Japanese water-cooled Kubota engine. It is worth noting that almost all agricultural equipment currently being produced is equipped with engines of this manufacturer. However, the Rossel XT 184d minitractor, like the Rossel XT 152d model, is equipped with an engine, again by a Japanese manufacturer, but already with the Kama and Kama R18 models, respectively. These engines are less powerful: it is only 18 hp.
All tractors run on diesel fuel and are equipped with a mechanical transmission. The RT 244d model differs from the others in the presence of all-wheel drive, while the Rossel XT152d mini-tractor is characterized by a minimum fuel consumption at idle: it has 0.4 l / h, under load the unit spends 0.8 l per hour. The same as that of the Rossel XT 152d mini tractor, the fuel consumption of the XT184d, other models consume a little more fuel.
To other characteristics of Rossel equipment: the engines of Rossel tractors are equipped with a preheating of the fuel mixture. This is a useful feature for regions with unstable or cold climates. In the middle lane, frosts are not uncommon, so the choice is obvious.
The entire design of a mini tractor, incl. and the gearbox is made of high strength steel. The transmission shaft gears are surface-cemented, making them one of the strongest parts in their segment. They can withstand any stress due to their high strength and resilience.
Rossel is constantly improving the informative panels. So, in the Rossel 242 mini-tractor, in addition to sensors showing the diesel level and temperature, a sensor is installed that shows the oil pressure. In addition, a tachometer with an odometer is now located on the information panel, it can be seen on it whether the parking lights are off or on.
Appointment
The main purpose of Rossel RT 242D is agricultural use. Cultivation of sown areas before planting cultivated plants, harvesting grain and tuberous crops, harvesting forage by mowing in small fields, vegetable gardens and personal plots - these are the basic tasks for which the Rossel RT 242D mini-tractor was designed. The three-point attachment connection system, similar to tractors of a higher traction class, turns the mini-station wagon into a full-fledged agricultural unit with wide functionality. Two- and three-body plows, hillers, tillers, planters, diggers, mowers and other devices are used as accessories. As a tractor that can easily move up to three tons of cargo using a trailer or transport trolley, the Rossel RT 242D mini-tractor can be used to move crops, feed, fertilizers and other goods. Compact dimensions and high maneuverability allow the tractor to be used in other areas of production activity. Rossel RT 242D has become a permanent place of residence for small livestock farms, factories, construction and communal enterprises, forestry enterprises and landscape design firms. The wide possibilities of Rossel RT 242D are dictated by an impressive list of attachments that can be used with a mini-tractor. Using the versatile mini-unit Rossel RT 242D, you can clean the area from debris and snow, supply water for various needs, chop wood and do a hundred other operations, increasing at times the efficiency of production processes. Reliable engine start at low temperatures is ensured by the fuel mixture heating plugs and a powerful battery, so work can be performed even in extreme cold conditions. A well thought-out engine cooling system ensures continuous operation even in summer heat. The Rossel RT 242D is a true versatile machine that makes manual work easier and allows you to perform many types of work with maximum profitability.
Features and operation
Rossel RT 242D has not only a well thought-out and reliable design, but also an elegant design. Access to the power plant and its components, as well as to the filler necks for technical fluids, is carried out by simply pressing the hood lever. In this case, the hood is opened by means of a special spring mechanism.Unlike its smaller "brothers" in the line, Rossel RT 242D has a full-fledged instrument panel with a tachometer, an indicator of the fuel level in the tank and the coolant temperature. The panel also displays light indication of engine oil pressure, battery charge, heating plug operation, operation of light devices and direction indicators. The tractor has full-fledged lighting equipment for driving on public roads, and for work in poor light conditions, a powerful headlight detector is installed on the rear fender. To connect the trailer to the tractor, a unified socket is installed on the inside of the right fender. The mini-tractor is economical, and the plunger-type injection pump installed on the Japanese engine ensures uninterrupted operation of the engine on domestic diesel fuel. Thanks to the installed glow plug, there are no problems with starting the engine even at low temperatures. The air entering the engine is cleaned by means of an oil filter, which eliminates the need to buy dry-type filter elements. Since the tractor in most cases operates in high dust conditions, the dry elements would have to be changed quite often. By solving this problem by simply changing the oil in the filter housing, you can significantly save on maintenance. Specialists also note the high maintainability of the Kubota liner engines. Overhaul can be carried out by simply replacing the sleeves, and, if necessary, other elements. Spare parts and consumables for "famous" motors can be easily purchased in most specialized stores.
Features of use
After purchasing the Rossel tractor and before starting the engine for the first time, you must:
- check the operation of all mechanisms;
- whether the bolted connections are well tightened;
- check the coolant level;
- oil level in the engine, in the gearbox, in the air filter.
After checking, you can start the engine. The first running-in of the tractor is carried out within 50 hours and at a load of up to 50%. Break-in is performed at idle speed and in each gear separately. After it you need to change the oil. Subsequently, the oil is changed after every 100 hours of operation. Running in the Rossel mini-tractor is done without fail in order to avoid rapid wear of the engine and gearbox.
SAE 10W30 oil is recommended for long term engine performance. If the tractor is not used in winter, the oil must be drained. The water is also drained from the tank. The battery should be fully charged, removed and placed in a room with room temperature. Drain gasoline from carburetor, gasoline starter, and gas tank.
Review of Rossel mini tractors
The Rossel minitractor is manufactured in Holland, and is equipped with Japanese diesel engines from Kama and Kubota. The Rossel mini tractor has a reasonable price and excellent quality. It is equipped with a cylinder liner motor, plunger pump, halogen lights. The dashboard has everything you need for the driver's convenience.
Rossel
The differential lock on these tractors is automatic. The ground clearance (clearance) is 45 cm. Due to the three-point universal hydraulics, it is possible to work with professional attachments. Attachments can be used both from the back and from the front due to the double hydraulic outlet. Also, the tractor is equipped with a power steering.
Rossel
These tractors are very easy to use, they will perfectly cope with work in agriculture, in the country, when transporting small loads. The Rossel mini tractor is very easy to operate, it can be operated even by those who do not have a driver's license. Spare parts for this tractor are inexpensive and are sold in almost all agricultural spare parts stores. No special maintenance is required for this unit.
Due to the hydraulic mechanism of the attachment, the Rossel tractor works like a professional one.Also on the units of this company there is an adjustment of the front and rear track. There is a possibility of displacement wheels on the axle shafts. The driver's seat can be adjusted for his height, while it moves back and forth, and the backrest tilts at different angles.
This tractor is very maneuverable, so it can be used not only on large fields, but also on small summer cottages. Rossel has an ergonomic control panel, equipped with headlights, which allows work in the evening.