How to make a garrison cap out of paper video how to fold a hat, a cap with a visor, a hat, a hat for repair

Tips for beginners

Often mothers want to know how to make a pirate hat out of paper for a child for a children's party.

The first scheme for making a pirate hat

The procedure will be as follows:

1. You need to find a convenient material for work. This can be a one-piece spread of a standard-sized newspaper or a large sheet of cardboard. You can use plain paper, but then you need wire to frame the hat.
2. The material should be strictly in half across, otherwise the product will not have a very neat appearance.
3. The fold should separate the long side of the sheet. Often inexperienced craftsmen fold the newspaper along the short side, this is not correct.
4. The corners of the sheet that are on the side of the fold should be bent towards the center.
5. As a result, it becomes clear that the product has the appearance of two triangles, which are aligned with each other by certain sides. It is necessary to carefully iron the folds, otherwise the hat will have an untidy appearance.
6. If the folded corners begin to unbend, you can simply fix them with tape.
7. Then the lower paradise of the headdress is tucked up. After that, you can see that the workpiece begins to take on the correct appearance. That is, it becomes similar to a pirate's headdress, except for those sides that stick out at the bottom. To remedy this situation, you should bend one of them up. For better reliability, you can secure it with tape.
8. After that, the finished product is turned over to the other side, the same is done with the second protruding edge.

The second scheme for making a pirate hat

The third scheme for making a pirate hat

To do this, draw a pirate emblem, cut it out and glue it to the front of the outfit. You can also paint the product in the appropriate color. After you familiarized yourself with the ways how to easily and easily make a pirate hat out of paper, your child may have a thing that no one else has. This workpiece does not require too many materials or special skills. One has only to show your imagination. The result obtained will delight and surprise everyone, and, first of all, your baby.

The fourth scheme for making a pirate hat
What do you think about this?
, your opinion is important to us

Origami (Paper Hats)

The history of the origin of paper hats in Japan goes back a long way. The finest rice paper, made by hand, by the way, was an excellent material for making hats. Of course, experts in the field of origami could not ignore such a necessary toilet item. And for many centuries, the Japanese folded from paper and samurai helmets, and headdresses of brides. Some were a necessary attribute of the traditional holidays of Boys and Girls.

One way or another, the art of folding paper hats has survived to this day. And on a hot summer day, you can roll a hat out of the newspaper. Try it with us.

1. Fold the sheet diagonally.

2. Fold back one third to the right.

3. Overlay the left corner on top.

4. Bend up the corners, except for the bottom.

5. Fold the bottom back.

6. The hat is ready. When turned over, it can be used as a bag.

1. Fold the rectangular sheet in half horizontally.

2. Fold it vertically again.

3. Fold a corner around the edge.

4. Fold the top corner.

5. Thread the corner inside.

6. Fold the top two layers diagonally. Do the same on the reverse side.

7. Spread out from the inside.

1. Fold half of a newspaper sheet in half.

2. Make a horizontal fold.

3.Bend the corners to the fold line (bottom corners of the top layer only).

4. Bend the top layer up.

5. Fold the bottom corners back.

6. Bend the bottom flap back.

7. Spread out. A hat can be worn like that. But you can.

8. Make a fold with a "cap".

1. Fold the paper diagonally.

2. Bend the corners to the bottom corner of the triangle.

3. Bend the corners towards the middle.

4. Fold the corners up.

5. Fold back the corners along the dotted lines.

6. Bend the top corner along the dotted lines.

7. Make another bend.

8. Fold the remaining corner back.

1. Make a fold and fold the sheet diagonally.

3. Fold the top layer up.

4. Fold back the corners.

5. Bend the bottom corner along the dotted line.

6. Make another fold.

7. Fold the side corners back.

8. Fold the bottom edge back.

1. Make a vertical fold on the half of the newspaper sheet.

2. Bend the top corners to the fold line.

3. Fold the cuffs in half.

4. Fold the bottom corners.

5. Fold both cuffs up.

6. Stretch the central parts of the layers, fold the square.

Hat made of paper

of course, simple large-format paper is used

Therefore, depending on the type of future craft, you need to prepare a large newspaper or a piece of Whatman paper, pencils, markers, paints, colored paper, scissors and a glue gun.

Fold the created rectangle again. The base for the cap is done. Spread the newspaper out on the table so that the fold is closer to the horizontal line at the top. Bend the two side corners from above and fold them diagonally so that they connect to each other. At the bottom there should be a space of 3-4 cm. This is a "rim" that will cover the head in a circle.

you can make other wardrobe options

Hat ideas and materials from which they can be made

Making a hat is a fun creative process. Success largely depends on the chosen style and design.

It is also important to choose high-quality material so that the same product turns out

Stylish headpiece

Important! The main decoration of the hat is an additional decorative element. It can be a feather, lace ribbon, bow

Especially creative seamstresses decorate their products with figures of birds, animals or flowers.

Creative hat

It is not at all necessary to use fabric for manufacturing. After all, hats are often an element of a carnival image, in which a non-standard approach to creation is appreciated. Such an element of women's clothing can be:

• From paper. For the manufacture of this material, you need to prepare paper of different densities, preferably large format. More often than not, paper hats are not worn more than once. They are relevant during hiking, relaxing on the beach, when you need to protect your head, but there are no possibilities for sewing.
• Another suitable material for creating a hat is cardboard. It is more practical to use than paper. A frame is often created from cardboard, which is then covered with fabric, mesh or decorated with fur.
• A wide variety of hats can be made from fabric. If the girl does not have sewing skills or time to create a pattern, then jersey can be used. The simplest model is a beret; various types of fabrics are suitable for its manufacture.
• In the cold season, you can crochet a fashionable hat. Or sew it from fur, for example, mink.

Note! Hats can be worn not only for the holidays - they can become part of your everyday look. Designers offer various design options that will add a "zest" to the image

Paper product

Hats are:

1. Hat Fedora is one of the most popular options. The features of her cut are wide margins. Felt is used to create it. Fedora goes well with a coat and dress. A girl with such a headdress looks elegant and stylish.
2. Separately, it is worth highlighting the headwear for the carnival or themed parties. You can be creative when making them.Headdresses are decorated with various decorative elements, several materials are used at once to make the hat look original.
3. Headwear for special occasions. For their manufacture, lace, beads, flowers, satin ribbons are used. Often they are complemented with a beautiful short crown. Such a hat looks elegant and elegant. Famous British women can be seen as an example of stylish evening headwear.
4. Panama is relevant in the summer. It is needed more for practical purposes than for beauty. Its main purpose is to protect the head from exposure to ultraviolet rays. Most often, a straw is used to make a panama hat or it is crocheted or knitted.
5. Headdresses for matinees are made for girls and boys from improvised materials.

Party hats

You need to choose a hat design in accordance with your image. But in order for the headdress to look beautiful, you need to choose not only high-quality materials, but also an accurate pattern.

Important! In an effort to showcase a creative approach to hat design, it is important not to overload the product. The image will look not only not harmonious, but the hat may not withstand a large number of decorative elements.

The easiest option is to make a turban.

Autumn pattern

Therefore, before creating a headdress, you need to come up with a sketch. Then the design will look harmonious, and the hat will become the highlight of your look.

What paper hats can be made with glue

In addition to origami hats, there are many models of paper hats that require additional glue, scissors and a pencil to make. These hats take a little longer to make, but the result will not disappoint either.

Fun topper hats, paper caps or cowboy hats can be worn at a children's party, New Year's party, or just to create a good mood.

Paper cylinder

The young gentleman will love the paper top hat.

To make it, you need a sheet of colored paper. You can take the packaging. As well as a thick A4 paper or cardboard sheet, scissors, glue, paints, pencil, two circles of different diameters.

After preparing everything you need, you can get to work:

1. Cut a strip out of a colored sheet. The width of the strip is the height of the future hat, the length is equal to the circumference of the cylinder.
2. Roll up the strip with a pipe, glue it.
3. On a piece of cardboard, draw two circles of different diameters with a common center. The inner circle should be equal in diameter to the glued pipe. The difference between them is the width of the cylinder fields.
4. Color the resulting fields and cut.
5. At the pipe, cut the bottom edge with a fringe 1 cm deep and wide.

At this stage, all the details are ready, it remains only to connect them. To do this, the fringe of the pipe must be bent outward, put the cut ring on the pipe and glue the fringe along its lower side.

You can diversify the hat with an additional fun decor.

Paper cap

The paper cap will appeal to both boys and girls.

The girlish version can be decorated with artificial flowers or appliques.

In addition to decorative elements, to make a baseball cap you will need:

The cap is made as follows:

1. Prepare a pattern for 6 or 8 sections of the desired size. Transfer details to paper material.
2. Cut out the main part of the cap.
3. Make one hole in the corners of the sections with a hole punch.
4. Align the holes.
5. Insert a rivet into all holes.
6. Fasten it by spreading the legs in different directions.
7. Glue the tail to the side.
8. Cut out the visor part.
9. Fold up its fringe.
10. Spread with glue.
11. Glue on the inside of the main part of the cap.

And now the baseball cap is ready. You can proceed to decorate it.

Paper cowboy hat

This origami cowboy hat is perfect for a home party or casual play. For a more serious event, it is better to make the hat more serious.

To do this, you need to prepare:

• thick paper;
• toilet paper;
• PVA glue;
• brown paint;
• laces;
• pattern.

The pattern looks like this:

Having adjusted it to size, the details are transferred to paper and cut out. Additionally, a bottom is cut out in the form of an inner oval of the fields with a fringe for connection. Then the parts are glued together: first the fields with the crown, then the bottom is glued.

Next, small holes are made on the sides, laces are passed through them and fastened with knots.

The hat is almost ready. It remains to give it some roughness to make it more natural. To do this, cover the entire upper surface with glue and stick the toilet paper in pieces. You should get a light drapery.

It remains to paint with brown or black paint. The child will be delighted!

–Categories

Dunno hat

If you wish, you can make this accessory yourself:

Measure the child's circumference and draw a circle according to the dimensions.

• Depart 2 cm from the circle and cut out.
• On a two-centimeter strip, make cuts every 3-4 cm.
• Step back at least 25 cm from the inner edge and cut out the brim of the future hat.
• We visually divide the previously cut circle into three triangles and cut out one of them.
• We make notches on one of the sides.
• We fold the cone and attach it to the hat using the fastening notches.
• We paint the entire surface with blue paint or cover it with fabric.
• From corrugated paper we cut out a brush and “hair” characteristic of Dunno from yellow paper.

It is advisable to complement the fabulous image with a blue tie, which is also easy to cut out of paper according to the given template.

As you can see, most hats are made according to the same scheme, so often you just need to stock up on an appropriate photo example, patience, try to decompose the hat into its component parts and make a beautiful accessory for any occasion.

How to make a top hat?

If you need to make a top hat, do not panic, because if you tackle this business wisely and choose the right manufacturing method, there is nothing complicated in this process. Now you will see for yourself that making a hat out of cardboard is easy.

To begin with, let's decide on the tools and materials that may be useful to you in the process of making a cylinder. Everything is madly simple:

• a couple of sheets of colored cardboard (their size will depend on how large your cylinder needs to be)
• stationery: scissors, pencil, compasses, eraser, glue
• beautiful ribbon for decoration (we will make a bow out of it on a cylinder)

So let's get to work:

1. On one of the sheets of cardboard, draw a circle with a compass (the diameter depends on the size of the cylinder), we call it the initial circle, from the center of which it will be necessary to draw another circle, with a size slightly larger than the initial one.

1. On the second sheet, draw a circle similar to the original (initial circle) and after that draw another circle from its center, the diameter of which will be twice as large as the small circle.
2. On the same sheet, from the same point in the center, draw a circle smaller than the initial one, it should occupy ¾ of the initial circle.

In total, on one sheet we have two circles, on the second three.

1. We take the first sheet (on which there are two circles) and cut out a circle (along the contour of the large one).
2. After that, with scissors, we make a fringe around the circumference (up to the contour of a small circle).
3. We fold the resulting fringe inward. Set aside the circle.
4. Take the second sheet of paper and cut it out along the outline of the largest circle.
5. Cut out the smallest circle from the inside with scissors.
6. We make a fringe with scissors from the outline of the small circle to the outline of the large circle.
7. We fold the fringe inward.
8. Now we need to cut out a segment from the rest of the paper, which will be the side walls of our cylinder. In this case, the size of the cut strip should correspond to the size of the small circle on the sheet (we make the size a little larger so that there is an overlap for gluing).

1. Now we will work with a sheet on which we have drawn three circles.Smooth the fringe on it so that it is more convenient to grease with glue. After all the pieces are well smeared with glue, we return them to their original position (sticking up).
2. Now we put a cylinder from a piece of cardboard on the missed circle with a fringe, press them well together so that the glue seizes, as expected.
3. We straighten the fringe on a small circle and also coat it with glue. We smooth out the fringe and put this segment on the top of the cylinder.
4. After the glue on the product dries well, you can start decorating the hat, for this we need our beautiful ribbon. It can be of any color and thickness, it depends on the taste and preferences of the manufacturer. If this top hat is masculine, you can decorate it with a black satin ribbon.
5. We tie a bow on the ribbon (there are a lot of ways, so you can choose any of them), the main thing is that it is done neatly.
6. The tape can either be glued or tied in such a way that you only need to cut one end. The cylinder is ready.