The best electric saws for reliability and quality

About electric saws

Not so long ago, quite powerful chainsaws have replaced ordinary hand saws, which allow you to cope with work several times faster. However, this is not the ultimate dream, because, as it turned out, electrical variations of this technique are much more effective.

An electric chain saw is a portable power tool with a chain saw that is powered by an electric motor built into the housing. The power supply of this very motor can be both battery and mains.

In comparison with the already familiar chainsaws, such designs are less noisy, do not pollute the environment with harmful emissions and in most cases are more lightweight.

At the beginning of its development, the tool was produced in the form of electric disk devices, but today such options are less relevant, and an increasing number of consumers are switching to the use of chain varieties.

Almost all of them do an excellent job with standard everyday tasks, but when choosing a specific model, it is still worth considering some features.

Did you know? The main structural parts of the electric saw (bar and chain saw) were created in the 19th century, and from the end of the 1920s, a gasoline engine was also actively used. However, in practice, all this was used only from the beginning of the twentieth century, using either pneumatic, then steam, or mechanical drive.

How to use?

The electric saw is a universal cutting tool, when working with which certain rules should be followed. This will not only further protect the master from injury, but also extend the service life of the unit.

The following instructions will help you to use your electric saw correctly.

• During operation, the cutting end of the tool must be kept away from foreign objects. Equipment must not be lifted to a level above the elbows. When cutting, the feet should be level on a firm surface. Do not store power saws near explosive and flammable materials.
• The device can be used not only in households, but also in the forest. To cut trees in this case, you will need an electric generator with a capacity of 6 kW or more.
• When cutting timber, it is advisable to choose a dry tree, because the built-in power protection means that the saw does not go well on wet wood.

• Before starting the engine, make sure that the device is in good working order and the presence of voltage in the network. After that, you also need to set the duty cycle. The adjustment process is usually described in the manufacturer's instruction manual. When choosing an extension for a saw, it is best to choose models with an increased degree of protection IPX5, IPX4, the outlet can only be connected through a differential machine. When using a generator, a pre-ground connection must be made.
• Saws with a collector must be connected to one phase, with an asynchronous motor - to a network with 380 V.

Pivot table

Now about each model in more detail.

Jigsaw for home and professional work | TOP 10 Best: Quality Rating + Reviews

Advantages and disadvantages

Recently, many craftsmen prefer electric tools that are powerful and can easily cope with any job. The electric saw is no exception, it is a reliable assistant both in the household and on construction sites.

The popularity of this device is explained by the following advantages.

Environmental friendliness

The device operates on electric energy and does not emit harmful gases into the environment, which is important when working in closed rooms.

Low weight. Compared to other types of fixtures, they are lightweight, which simplifies the workflow.

High power

The performance of the tools is in no way inferior to gasoline tools.

Easy to operate. Preparing the saw for work does not take more than 5 minutes. It consists of fixing the saw equipment, filling with oil and checking the voltage in the network. The oil tank is equipped with an inspection window, which allows you to control its filling. The oil is supplied automatically by means of a special pump, it can be adjusted with a screw.

Unpretentious care. The tool only needs to be cleaned and the cutting elements and oil must be changed in time.

• Huge selection of modifications. Manufacturers produce saws with a transverse and longitudinal engine arrangement.
• Safe to use. You can work with such devices even at height. The saws have a built-in brake, which is responsible for blocking the engine in case of accidental start.
• Silence. Compared to gasoline counterparts, this type of tool works quietly.
• Affordable cost. The price of electric saws depends on their power and equipment. Since manufacturers produce simple and elite models, any master can afford to purchase them.

As for the shortcomings, there are not many of them. The main disadvantage of devices is considered to be tied to the electrical network. The speed of work is often complicated by the lack of cable length.

Rating of chain saws

Electric chain saws have a number of advantages over gasoline powered tools. Electric devices are connected to the network, have higher performance, are lightweight, quiet and economical.

When compiling the rating, feedback on the electric chain saw and expert opinions were taken into account. In the TOP, the equipment was selected according to the following parameters:

• Power. This value affects the ability of the equipment to withstand heavy loads;
• Locking system. Influences the safe operation of the device and protects against unexpected shutdowns;
• Heat protection. At elevated temperature indicators, disconnection from the network is carried out;
• Soft start option. When turned on, the revolutions increase gradually, which increases the operating time of the equipment;
• Chain tension adjustment. The safe properties of the instruments depend on this value.

The design of the tensioning mechanism and the reliability of the gearbox also played an important role in the selection of the nominees.