Running in
This is a very important stage in the robot of the mechanism, and it cannot be neglected. If you suddenly decide that you don't need such an element, we hasten to upset you that in this case your unit may simply burn out.
Let's get down to the process itself. It should go slowly without fuss. For the first couple of hours, use the walk-behind tractor at low power so that the mechanism can adapt to the robots mode. If you use the following rules for running a walk-behind tractor, then nothing will threaten you:
- the quality of the fuel and its regular replacement are the key to the efficient operation of the engine;
- then be sure to check the oil level in the oil barrel. Top up if necessary;
- it's time to directly start working with the walk-behind tractor. You need to start with medium power, and then change gears. This way you will know if the engine is working well. And at the same time you will begin to get used to the device and its control;
- the final step will be to check the performance of functions - cleaning, mowing, plowing. The main thing is not to overdo it and not do more than what is allowed in the operating rules.
Which walk-behind tractor is better: gasoline or diesel
As for which walk-behind tractor is better - diesel or gasoline, it is necessary to consider both options in detail.
The main advantages of a diesel walk-behind tractor are:
- low fuel consumption, which makes it a fairly economical option;
- the simplicity of the structure of the motor facilitates its repair and operation;
- the large mass of the walk-behind tractor guarantees it a good grip on the ground.
However, there are also disadvantages:
- it is considered an expensive mechanism, but due to the low fuel price, it quickly pays off;
- sometimes it is necessary to carry out such a preventive procedure when the motor is running at full strength.
A diesel walk-behind tractor has its pros and cons in comparison with a gasoline one
Now let's consider the advantages of a gasoline mechanism:
- low unit cost;
- inexpensive maintenance and repair, compared to diesel;
- creates much less noise than the previous version;
- it starts up easier and faster, since there is no need to heat up the fuel before starting.
Negative factors in the operation of a walk-behind tractor with a gasoline engine:
- small performance. Such a mechanism will be able to withstand the loads on small land plots;
- low productivity makes it impossible to use it for, for example, a whole day.
It is impossible to give an unambiguous answer as to which option is better. The final choice will depend on what the owner himself expects to get from the unit: how much power is needed, on what area and how often it will be used.
adjusting washers lifan solano dvs 4afe
adjusting washers lifan solano dvs 4afe
Posted by mishgan on Tue Apr 05, 2020 4:55 pm
Adjusting washer size from 2.50 to 3.55 Lifan Solano.
Dimensions: 2.50 2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 3.00 3.05 3.10 3.15 3.20 3.30 3.35 3.40 3.50 3.55
E010001201-355 I think it will be relevant!
The controversy on the forum, it does not matter that the Olympics among the mentally retarded, even if you won, you still Do # b @ eB!
Posted by Sergofan on Tue Apr 05, 2020 5:06 pm
Posted by cas6088 on Wed Apr 05, 2020 6:23 pm
Posted by cas6088 on Wed Apr 05, 2020 6:24 pm
Posted by mihman25 on Wed Apr 05, 2020 11:20 pm
Post mishgan »Wed Apr 06, 2020 8:00 am
Dispute on the forum, it does not matter that the Olympics among the mentally retarded, even if you won, you still Do # b @ eB!
Posted by Karek Wed Apr 06, 2020 7:51 pm
Posted by Svetlana Wed Apr 06, 2020 10:57 pm
You live, you live for yourself, and then BAM! And shYshteen is no longer for you, but for the children!
I am the backlight
Post by Sergofan Thu Apr 07, 2020 12:39 am
Posted by Karek Thu Apr 07, 2020 6:15 pm
Posted by Sergofan on Mon Apr 11, 2020 10:14 pm
HM. We take a washer with a size of 3.10 and see the exist. we drive in the number from the catalog for 3.10 it is 13753-74250 We see this. original Toyota - 374r. there is still a proposal for the original manufacturers this is Hino (number 13753-74250) - 420r.
Now we look at the proposed number E010001201-310 in the ekzist (shows the manufacturer Geely) - 420r.
it turns out that there is no sense or what?
Posted by Sergofan on Mon Apr 11, 2020 10:21 pm
Posted by mishgan »Tue Apr 12, 2020 8:24 am
Sergofan wrote: Hmm. We take a washer with a size of 3.10 and see the exist. we drive in the number from the catalog for 3.10 it is 13753-74250 We see this. original Toyota - 374r. there is still a proposal for the original manufacturers this is Hino (number 13753-74250) - 420r.
Now we look at the proposed number E010001201-310 in the ekzist (shows the manufacturer Geely) - 420r.
it turns out that there is no sense or what?
Dispute on the forum, it does not matter that the Olympics among the mentally retarded, even if you won, you still Do # b @ eB!
Varieties
Currently, there are several main types of motoblocks on the agricultural machinery market.
On sale there are:
- light motor cultivators;
- medium;
- heavy.
Light-type equipment in most cases has a capacity of 6 liters. with., and its weight extremely rarely exceeds the mark of 100 kg. Such specimens do not have a large fuel tank. Due to the low weight, it is not very convenient and efficient to process dense and problematic soils with such models. Lightweight motor cultivators are not designed for a large amount of cultivated land.
As for modern medium-sized motoblocks on a diesel engine, basically their weight reaches 100-120 kg. The standard engine power in these models can be from 6 to 8 hp. with. In accordance with the indicated indicators, they are quite suitable for a large territory. In such conditions, this technique will demonstrate itself only from the good side. Medium type construction is designed to work with different types of soil. Of course, such copies are more expensive than lightweight ones, but in the course of operation they pay for themselves with interest.
Practical and reliable heavy walk-behind tractors are no less popular today. This technique is characterized by great power and the same great weight. On average, these models weigh from 200 to 300 kg. These devices are the most powerful (power ranges from 8-9 to 12-15 hp). They have the highest price, but they cope with their main task with a bang.
About the device of motoblocks and valves
Motoblocks Cayman, Patriot, Texas, Foreman, Krosser, Viking, Forza, Sadko, Don are a rather complex technical device consisting of several main working units: engine, transmission, chassis and controls.
The very understanding of the design of the walk-behind tractor is very important, because the correctness of the repair and adjustment work depends on it. Let's consider each node in more detail:
Let's consider each node in more detail:
- Engine. Depending on the configuration, 2-stroke and 4-stroke motors can be used. At the moment, the most widespread are 4-stroke ones, because they have higher performance indicators.
- In addition, engines are divided into diesel and gasoline. The former are most suitable for large-sized units, and the latter are suitable for small and medium-sized motoblocks.
For more details about the operation of the motor block engine, see the video below:
- Transmission. The torque that is transmitted from the engine to the wheels is carried out precisely with the help of the transmission. It includes a gearbox, gearbox, clutch system and differential (for some models).
- Depending on the type of gearbox and clutch, not only the cost of the walk-behind tractor is formed, but also the principle of operation of these components.
- Chassis. Most motoblocks have in their presence a pair of wheels of various types - pneumatic or metal, equipped with grousers. In addition, the chassis includes the frame itself, on which all other elements of the walk-behind tractor are located - the engine, gearbox, etc.
- Control system. All control of the walk-behind tractor is located at the distance of the operator's outstretched arm, i.e. on the handle and in the immediate vicinity of it.This includes the clutch lever, shift and travel buttons, emergency engine stop, etc.
As for the carburetor, it is part of the engine power system. It acts as a kind of mixer that mixes liquid fuel with air to obtain a fuel mixture, which then enters the engine cylinders. Structurally, it looks like this:
- float chamber;
- diffuser;
- spray;
- throttle and air dampers;
- mixing chamber;
- jet, etc.
This is a description of a standard carburetor, but different models of a walk-behind tractor, such as Hooter, Profi, Plowman, Champion, Carver, Husqvarna, may use different carburetors, respectively, and the adjustment will be different.
This is interesting: How to adjust the carburetor of a walk-behind tractor with your own hands: we study in all the details