Purchase and preparation for use of the Metabo hand-held circular saw
When buying a tool, make sure that it is in good working order and completeness, ask the seller to make a test run of the saw motor to make sure it works;
Check the availability of accompanying documents and the correctness of filling out the warranty card;
Explore the Metabo circular saw device
Pay special attention to safety rules when working with circular saws;
Install the saw blade according to the recommendations in the manual. Always check the disc for cracks, chips and other defects
Do not use a defective saw blade. The use of abrasive wheels is prohibited;
Make sure the insulation of the motor, power cord, electrical outlet is in good condition. To connect the Metabo circular saw, we recommend using an industrial extension;
Provide a clean and well-lit workplace;
Take care of the presence of a vise or clamp with which you can secure the workpiece:
Before starting work, adjust the angle and depth of the cut;
Wear safety goggles, earmuffs, rubberized gloves, and anti-slip shoes. It is not allowed to work with the circular saw in loose and fluttering clothes;
Hold the Metabo circular saw with both hands, keep away from the saw blade, avoid getting in line with it;
Before each use of the tool, check that the protective cover is securely closed. It is forbidden to fix the casing in the open position;
It is forbidden to work with one hand while holding the workpiece with the other; it is forbidden to saw while holding the part on the knee;
After turning off the saw, wait until the saw blade has come to a complete stop and only then put the tool on the table;
Always unplug the Metabo circular saw during breaks and after finishing work.
Download instruction manual
How to choose a disc battery model?
Disk circular saw for autonomous operation is a simple and convenient solution for continuous operation. The compact and lightweight rechargeable model is suitable if work is performed far from autonomous power sources or requires freedom from cords and extension cords. Metabo has models in the KSA 18 LTX series equipped with a fast charging system and 4-5.2 Ah batteries.
The saws support cutting of the material in various planes, with an angle of inclination of up to 50 degrees, at idle speed, they develop 2700 rpm. The standard weight of models in full equipment is about 4.3 kg, which allows you to work as long as possible without discomfort.
Features of plunge-cut saws
Unlike a conventional circular saw, a plunge-cut saw has the highest possible accuracy cut. Such solutions are distinguished by precise adjustment of operating parameters. These handheld models have a positioning system that allows you to meet the cut setpoint down to the millimeter.
When choosing a suitable option, you should pay attention to the cutting depth at an angle of 90 degrees. The minimum (10 mm) is enough for cutting chamfers and mounting openings in laminated parts
If you need to cut a hole for a sink in the countertop or renovate the floor, you should choose a model with a wide range of cutting depths - up to 75 mm.
Network varieties
The usual range of devices with a guide rail implies a division into professional and domestic options.Compact options for home use are lightweight, power up to 2.2 kW, cutting depth in the range of 40–70 mm. If you plan to perform various operations that require control of the sawing accuracy, it is worth choosing more expensive options with adjustable cutting depth, a special guide bar. Professional models have a power of about 5 kW, allow you to more efficiently vary the working range of the tool, and are suitable for long continuous work.
Table views
If you do not plan to move the tool, you should consider purchasing circular saws in a tabletop format. A permanently fixed cutting tool allows you to create conditions for safer cutting of hard sheet and molded materials. The table saw has a cutting depth range of up to 70 mm. When choosing, you should focus on the power of the equipment, the availability of additional options.
Also available in models with a table used as a base. Such stationary beds are equipped with special legs, support the ability to adjust the cutting depth in the range of 50-140 mm by increasing the diameter of the cutting disc. The bed itself can be prefabricated or cast. The first option is more versatile. For the most powerful saws, a cast bed is used.
For information on how to choose a circular saw, see the next video.
Overview of the range of hand-held circular saws from the Metabo brand
Metabo hand-held circular saws have appeared on the woodworking machinery market relatively recently. They came as an addition to expensive circular machines, the use of which at home is not always justified. In addition, such machines are often large and heavy, which makes them difficult to store and transport. At the same time, circular saws are distinguished by a simple device, compact size and low weight, have an affordable cost, and in terms of their functionality they are not much inferior to sawing machines. An important advantage of the hand-held circular saw is its mobility - you can use her in the most inaccessible places, including on roofs. With this tool, you can perform rip and cross cuts of wood at different angles, with high speed, precision and cleanliness of the cut.
The Metabo concern received its current name almost a century ago, in 1929. Then in the assortment of the manufacturer there was only one product - a hand-held mechanical drill, after which the company was named
In the second half of the twentieth century, the Metabo management paid considerable attention to expanding the range of produced power tools, soon woodworking machines and hand-held circular and miter saws appeared in their list.
Most of Metabo's equipment is produced in factories in Germany, the USA and China. The main advantage of the manufacturer's equipment is its quality. Wherever the Metabo circular saw is assembled, you can be sure that it meets all modern quality standards, is distinguished by high reliability, performance and durability.
However, if you prefer to buy European-assembled equipment, we recommend paying attention to the Metabo Plus series hand-held circular saws, they are produced at the company's German plant
Overview of circular machines of the Metabo brand
A circular machine is one of the types of woodworking tools, which is indispensable at a construction site, in furniture and carpentry production, it will also be useful in the household. Metabo circular saws successfully cope with sawing wooden beams and boards, providing high accuracy and cleanliness of the cut, some models can function as a miter saw.
The first mention of the Metabo concern dates back to 1929, when hand drills under this brand appeared on sale.After World War II, the company significantly expanded its range of products. Now, along with hand tools, electric machine tools are on sale. Today, Metabo circular saws are manufactured at factories in Germany (Nürtingen) and China (Shanghai). To determine where a particular machine was produced, it is necessary to look at the accompanying documents and study the marking of individual assemblies and parts. However, the Metabo concern guarantees the high quality and reliability of its equipment, regardless of the country in which it was produced. All power tools are manufactured in accordance with the company's internal standards for quality and safety. They are certified in most countries of the world, which is confirmed by the relevant documents.
The Metabo company takes care of the after-sales support of its equipment. Thousands of service centers have been opened around the world, the official manufacturer's warranty for all models of circular machines has been extended to 36 months.
Features of Metabo machines:
- High-quality assembly at the factory;
- High productivity of machine tools;
- A wide selection of models with different characteristics in a wide price range;
- Extended up to 36 months warranty from the manufacturer;
- High-quality after-sales information and technical support.
Output
The cordless circular saw is a handy and practical tool for DIYers, ideal for sawing wood and soft metal products. Such an acquisition can be a good alternative to a network tool or a mobile addition to it.
Miter saw: what it is, design and application features, how to choose the best option, an overview of popular models, their pros and cons
Band saw for meat and bones: how to choose the best option, TOP-10 rating of the most popular models, their pros and cons, tips for use and care
Bandsaw for meat and bones: how to choose the best option, TOP-10 rating of the most popular models, their pros and cons, tips for use and care
Reciprocating saw battery: how to choose the right one, what characteristics to pay attention to when selecting, rating of the best models, their pros and cons