Parma concrete mixers review

Peculiarities

Among the characteristic features of "Parma" concrete mixers, several of the most important can be distinguished.

  • Wide range of. If you want to purchase a concrete mixer from this manufacturer, then you will be presented with a large selection of various models that differ in their functionality, technical characteristics and volume of work performed.
  • There are only electric models. This feature may be a plus for some, but for some more a disadvantage, since the presence of only one type of food limits the consumer base.
  • Quality. The manufacturer Carver, which makes Parma concrete mixers, is known for its variety of products.

The lineup

B-180E

B-180E - a model with the necessary characteristics for the performance of work of small and medium complexity for the construction of small structures. The total drum volume is 175 liters, of which 115 are effective. The toothed drive belt can handle heavy loads. The polyamide ring, available in the design, increases the service life and makes this model more wear-resistant.

The power mode is standard and is 220 V / 50 Hz, power consumption is not more than 850 W, the nominal useful indicator for the motor is 500 W. As for the drum rotation speed, it is equal to 23 rpm. The average preparation time for the mixture is about 4 minutes. Wheels with a diameter of 160 mm allow for transportation around the site. The weight is 57 kg, so that the movement of the unit does not cause any particular problems.

BS-160E

BS-160E is a convenient and ergonomic concrete mixer adapted for mixing cement, water, as well as various fillers that can be used in the manufacture of mixtures. The advantage of this model is its small dimensions, which will be preferable when working in areas with limited area. The rated power of the electric motor is 700 W, the sound pressure level is 95 dB, and the weight is 56 kg.

As for the drum, its volume is 160 liters, 110 - effective. The maximum rotation speed is 30 rpm, one portion of the mixture is made in 5 minutes. The solid construction and quality components make this concrete mixer reliable with a long service life. It is worth noting the increased level of resistance to various physical loads during operation.

B-120E

B-120E is a reliable unit of low power and high performance. The presence of a polyamide crown makes the work more stable, high-quality and at the same time less noisy. This part consists of four sectors, and any one can be replaced, which is convenient during operation. The design has an induction motor with a copper winding, thanks to which the unit can operate at particularly high temperatures. Their maximum performance can exceed by 75 degrees those in which the concrete mixer is operated.

The drum has a capacity of 120 liters, of which 60 are effective. Power consumption no more than 600 W, nominal useful for the engine - 370 W. The time for preparing a portion of the mixture is 4 minutes, the maximum drum rotation speed is 27 rpm. The diameter of the wheels is 160 mm, the weight is 46 kg. Small dimensions make not only transportation much easier, but also full transportation.

BS-200E

BS-200E is a powerful unit that is most suitable for medium and high volume operation. Unlike other models, this equipment has an electric motor with a rated power of 900 W. The sound pressure level is 95 dB, the drum volume is 200 liters, and 140 of them are effective.High-quality electrical equipment allows you to prepare one large portion of the mixture in 6 minutes.

The drum rotation speed is 30 rpm, weight is 59 kg. It is worth noting the presence of a special protective casing that prevents various objects from entering the inside of the device. The increased working life was made possible by the use of a ring gear made of high quality cast iron.

BS-121E

BS-121E is a low-power unit, which is designed to perform small-volume work in a domestic environment. As for the electric motor used, its rated power is 550 W. The total volume of the drum is 125 liters, effective - 90. The sound pressure level is the same with the previous presented model and is equal to 95 dB. The rotation speed of the drum is 24 rpm, the diameter of the loading window is 39 cm.

It takes 5 minutes to make one portion of the mixture, the original design of the fixing unit is used, which increases the safety of the working process, and also reduces its labor intensity. The symmetrical design makes this concrete mixer stable, and the casing covers the inside of the machine and protects it from physical damage.

flwn.imadeself.com/33/

We advise you to read:

14 rules for saving energy