Japanese mini tractors: an overview of brands and models

Model range overview

• TXG
• TM
• TH
• TU
• TF
• TG
• TJ
• TJW

Features of Iseki mini tractors:

• Versatility and wide functionality.
• Economical fuel consumption.
• Comfort in handling, which is ensured by an ergonomic design and power steering.

Like other Japanese mini tractors, Iseki has a complex design, the latest achievements and modern technologies are used in the production. Naturally, this technique cannot be cheap. The cost of new Iseki mini tractors, depending on the modification, ranges from $ 4300 -7500.

Used equipment can be purchased 2-2.5 times cheaper. However, there is a nuance - the older the car, the less likely it is to pick up the necessary parts. It is possible that they will have to be shipped from Japan, which will cost significantly more than original parts on newer models.

TXG series

Mini tractor Iseki TXG 237 with a capacity of 27 hp - the only model in its subgroup, is very popular.

Mini tractor Iseki TXG 237

The compact, maneuverable unit is widely used in the agricultural sector, in construction, in public utilities, it is perfectly aggregated with a variety of additional mechanisms. The warm cab allows you to work in the car in all weather conditions.

TU series

The Iseki TU series minitractor is a popular Iseki TU175 model with an engine power of 17.5 hp, an indispensable assistant on a personal plot. The TU 177 model is equipped with a large soil tiller and has a canopy.

Video review of the Iseki TU175 mini tractor

TF series

The Iseki TF series is powered by 27hp three-cylinder diesel engines. The presence of a spacious heated cab allows you to operate mini tractors in difficult-to-pass areas, in difficult conditions. Available in four-wheel drive or front-wheel drive models.

Mini tractor Iseki TF17F

TG series

Iseki TG mini tractors are distinguished by a higher engine power of 30-50 hp, high cross-country ability, optimal maintainability, the presence of multi-disc brakes, a three-level transmission and a power steering. One of the most popular models is the Iseki TG5470 (46 hp).

Mini tractor Iseki TG 5470

The Iseki TJ and TJW models represent a group of powerful construction equipment. Professional machines have four-cylinder engines of 75-105 hp, and numerous attachments are rationally connected to them.

User manual

The price of the Japanese Mitsubishi mini tractors is not small, but it is fully justified by the quality and reliability. Cheap equipment wears out and breaks down much faster. Buying a Japanese mini tractor, even a used one, will be a profitable investment with a quick payback.

Operation manual for the Mitsubishi Shakti mini tractor: Operation manual for the Mitsubishi mini tractor

Taking into account the use of Mitsubishi in Russia, specific improvements have been made to the design of the minitractor, allowing it to be operated in different climatic conditions. For this, an improved fuel filter and a removable insulated cab are installed on the machines. The design of the filter allows you to fill the minitractor with a low quality diesel engine.

First start

Each model of the Mitsubishi mini tractor undergoes a thorough factory control. The recommendations of the operating instructions for running-in are to accurately and carefully test all working systems in the first 25-50 hours of operation. During this period, it is recommended to perform all work, avoiding increased loads, at reduced speeds.

After the recommended period, change the engine oil, transmission oil, engine oil filter, perform other manipulations in accordance with the manual.

Maintenance

The schedule for preventive inspections of the tractor is indicated in the manual, in addition to daily technical inspections, the manufacturer recommends performing specific work every 100, 200, 400 hours of operation.

The device of the hood of the Mitsubishi minitractor

Mitsubishi diesel engines use engine oil or universal tractor oil of Super class API, for transmission they use hydraulic oil of class GL-3 and higher, for the steering gear they use thick grease NLG1-N1.

At the end of the field work, conservation is carried out, namely: they clean the tractor of contamination, dry it, drain the oil and fuel, lubricate the parts so that corrosion does not form, cover it and put it in a dry place.

Basic malfunctions and ways to eliminate them

Guaranteeing the owners of the flawless long-term operation of Mitsubishi mini tractors, the manufacturer requires strict adherence to the rules for operating the machine.

Mitsubishi mini tractor device

The most frequent breakdowns and malfunctions occur due to elementary ignorance or non-observance of the instructions of the instructions.

• When operating a Mitsubishi mini tractor in difficult conditions, it is recommended to carry out preventive maintenance more often.
• When the engine stops due to lack of diesel fuel, air enters the fuel line, which can only be removed by flushing the fuel system.
• If the battery is not used for a long time (conservation of equipment, other reasons), it is necessary to recharge it periodically, not allowing it to completely discharge.
• Carefully connect the battery terminals - the system has a negative ground connection.
• When cleaning the radiator, do not damage its surface, any defect or deformation will significantly reduce the effectiveness of cooling.

The clutch does not transmit torque:

• There is no pedal free play (you need to adjust it);
• The drive discs are worn out or have oil stains (they need to be replaced or cleaned);
• The discs on the splines are sticking (check their position and, if necessary, remove the jam).

The attachment does not rise:

• The oil level in the hydraulic system has dropped below the minimum mark (add oil);
• The hydraulic pump is off (turn it on);
• Hydraulic safety valve hangs up (disassemble and clean valve).

The brake is not working well:

• Pedal free travel has increased (adjust its position);
• The brake disc or pad is worn out (replace the corresponding parts).

Transmission overheats:

• Small gear or bearing clearance (adjust);
• Lack of oil or its poor quality (add oil to the required level that is suitable for this model);

Starter does not work:

• Broken or poor contact of the wire (solder or link it);
• Weak battery charging (charge it);
• Short circuit (clean the collector surface or replace the brushes);
• Poor magnetic switch contact (turn switch travel 2-3 turns).

Advantages and disadvantages

The demand for Japanese mini tractors is driven by high quality workmanship combined with excellent performance.

The pros of a mini tractor from Japan include a number of characteristics.

• High cross-country ability - confidently move on low quality roads, off the road network and on any type of surface from asphalt to lawn and paving stones.
• Performance - equipped with internal combustion engines with an effort of up to 105 liters. with. and traction indicators up to 2 tons.
• Endurance - they work properly on all types of soil, they are not afraid of extreme climatic and road conditions.
• Multifunctionality - a large selection of attachments makes the use of machines available in farm work, private households and on construction sites.
• Maneuverability - Japanese vehicles are considered the best in terms of speed of direction change. The indicator of the minimum turning radius for different models is 1900-3500 mm.
• Ergonomics - Ease of use is ensured by a combination of a comfortable cabin with full all-round visibility, ease of getting in and out of it, and easy accessibility of all controls.
• Reliability in operation - in terms of the quality of materials and assembly, mini-tractors of famous Japanese brands surpass any Russian or Chinese counterpart.

Minuses:

• the purchase of "Japanese", as well as spare parts for them, is much more expensive in comparison with agricultural machinery of Russian or Chinese brands;
• demanding in terms of maintenance and quality of fuels and lubricants, for example, cars need to systematically adjust the valves, since an increase in the gap between them and the camshaft leads to engine breakdown;
• spare parts have to be ordered from Japan.

User manual

Iseki mini-wagons have high technical performance. Machine with an average power of 16-18 hp. is able to easily perform work that can be done by its Chinese counterpart with a much higher power - not less than 25 hp.

Durability of parts and assemblies of Iseki mini tractors, impeccable performance, high working life are the distinctive characteristics of Iseki mini tractors. Therefore, equipment of this class is extremely demanding for systematic preventive maintenance and timely repair.

Operating instructions: Operating instructions for the Iseki mini tractor

Service

The Iseki mini tractor consumes diesel fuel. Under the hood of each tractor there is a plate with recommendations for routine maintenance. For engine oil, a replacement period is set after 100 hours of operation, a systematic check - every 5 operating hours. Iseki mini tractors run on semi-synthetic diesel oils: SAE 10V30 for the engine, MGE 46V - for hydrostatic transmissions, SAE 80 - for hydraulics and steering gear.

The condition of the air filter is checked every 50 hours of operation; after 400 operating hours, a complete replacement of the air cleaning system is performed. After 940 hours of operation, a complete test of the technical condition of the tractor is carried out - checking the operation of devices, mechanisms, assemblies, tightening the fasteners.

Disadvantages with maintenance of Iseki mini tractors:

• The exceptional quality of the mini tractor affects its price - much higher than the usual budget class counterparts.
• Problematic and costly in relation to repairs - only original spare parts are suitable for Iseki, which can be purchased through an official dealer network.
• Incorrect work with front-end loaders, which, however, is typical for all mini tractors.

Iseki mini tractor conservation

• It is necessary to regularly clean the body of the minitractor from dust and oil stains, control the pressure in the tires, and also adjust the clutch and brake pedals every 50-100 hours of operation;
• At the end of the field work, conservation is carried out, namely: they clean the tractor of contamination, dry it, drain the oil and fuel, lubricate the parts so that corrosion does not form, cover it and put it in a dry place.

First start

The first start-up and running-in of the tractor are carried out in accordance with the instruction manual.

Video review of the first exit of the Iseki 1500 mini tractor

Video review of the running-in of the Іseki 1500 mini-tractor

Basic malfunctions and ways to eliminate them

Although Japanese mini tractors are renowned for their durability and long service life, they need proper maintenance and regular repairs.

The implementation of simple recommendations will allow you to avoid annoying breakdowns, malfunctions:

• At each start attempt, the starter is not allowed to run for more than 10 seconds, continuous start attempts will drain the battery.
• Be sure to warm up the engine, regardless of the temperature setting, this will extend the life of the engine.
• Checking the condition of the oil pressure warning lights will help prevent serious damage from insufficient lubrication.
• Driving at high speeds is excluded if the right and left brakes do not work synchronously.

The clutch does not transmit torque:

• There is no pedal free play (you need to adjust it);
• The drive discs are worn out or have oil stains (they need to be replaced or cleaned);
• The discs on the splines are sticking (check their position and, if necessary, remove the jam).

The attachment does not rise:

• The oil level in the hydraulic system has dropped below the minimum mark (add oil);
• The hydraulic pump is off (turn it on);
• Hydraulic safety valve hangs up (disassemble and clean valve).

Braking is weak:

• Pedal free travel has increased (adjust its position);
• The brake disc or pad is worn out (replace the corresponding parts).

Transmission overheats:

• Small gear or bearing clearance (adjust);
• Lack of oil or its poor quality (add oil to the required level that is suitable for this model);

Starter does not work:

• Broken or poor contact of the wire (solder or link it);
• Weak battery charging (charge it);
• Short circuit (clean the collector surface or replace the brushes);
• Poor magnetic switch contact (turn switch travel 2-3 turns).

Japanese mini tractor manufacturers

Mitsubishi

Among the most popular manufacturers, of course, it is worth noting primarily the Mitsubishi mini tractor. They are distinguished by a small turning radius, compactness and low noise. If we talk about design features, then many models began to be produced with an improved fuel filter on the engine. This allows you to work with such equipment even in severe frost.

Kubota

KUBOTA mini tractors are no less popular in the domestic market. They are released in several series and are presented in a wide range of models. Such units can be safely used for any tasks in agriculture, in the utilities sector, on farm plots.

Also, among the Japanese manufacturers of motorcycle tractors, it is worth highlighting SHIBAURA, Hinomoto, Iseki, etc. It is difficult to say which manufacturer is better, because each has its own characteristics. Just choose the unit according to your goals and be careful when buying.

Any technique will serve you for years if you take proper care of it. By the way, even high-quality rubber is the key to smooth movement and good turning. Be sure to select tires according to the season. And do not forget in case of repair that only original spare parts are suitable for Japanese mini tractors. Take care of your mini tractor and it will delight you with its high-quality work for a long time to come.

Mini tractor Mitsubishi

The history of the Mitsubishi brand begins in 1870. Today it is a mega-concern whose spheres of interest extend to many industries: shipbuilding and aircraft construction, oil refining and automobile manufacturing, light industry and insurance, real estate and many other business areas. Three diamonds, this is how Mitsubishi is translated from Japanese, have been chosen as the emblem and philosophy of the company: responsibility, honesty, openness.

Mini tractor Mitsubishi

Mitsubishi Agricultural Machinery Co., Ltd., part of the Mitsubishi Group, manufactures mini tractors and other equipment. The distinctive characteristics of the Japanese Mitsubishi mini tractors are exemplary quality, reliability, exceptional ergonomics, high productivity and versatility. They are adapted to the efficient performance of a huge range of tasks and are widely used in the agricultural sector, in the utilities sector, landscape design, and construction.

Lineup of Japanese mini tractors

Consider the Japanese Kubota tractors. Tractors and mini-tractors from this manufacturer have about 80 models. The company began to develop back in the 70s. 20th century and is one of the leaders in the production of agricultural machinery.

Technical characteristics of Kubota units:

1. Kubota mini-tractor models can be both wheeled and tracked.
2. The tracks are made of durable rubber, which provides extra comfort when working on all surfaces.
3. The equipment of this manufacturer is divided into series, each of which is equipped with the corresponding equipment.

Series B.The power of these Japanese mini tractors is 18-30 hp. Each model has four-wheel drive, increased maneuverability. Fuel type - diesel. Some models in this series are available without a cab.

BX series. More advanced equipment of the B series, with a capacity of 18 to 25 hp.

The L and M series are already full-fledged powerful tractors, using a variety of attachments.

The Japanese Mitsubishi tracked mini-tractor, as a rule, is made to order. The farmer can order any type of tracks or wheels, the presence of a cab or its absence, any other modification. But still, there are similarities between all models of this manufacturer. Diesel engines are equipped with a fuel filter to recycle low quality diesel. Operation at low air temperatures can be ensured.

Canopies can be attached to the front, rear and even the side of the machine. If you apply a special blocking of equipment, then you can work even in heavy duty. Depending on the wishes of the customer, this crawler tractor can be with or without a cab. Everything inside is adjustable for the absolute comfort of the customer.

In addition to all the above characteristics, tractors that came out of the lines of Japanese factories are given a technical passport, which allows registering a mini-tractor in the traffic police department as a vehicle.

Initially, a mini-tractor from Japan was developed for the household, processing of small land plots.

The brightest model is SHIBAURA ST 324 HST. This Japanese mini-tractor has an engine of a domestic manufacturer, which increases the power of the equipment several times.

The mini-tractor is four-wheel drive, reliable and environmentally friendly (the system provides low exhaust emissions).

The gearbox is three-stage, the movement is carried out using wheels or tracks, depending on the choice of the customer.

Almost any mounted structure can be used for this technique, including a trailer. The carrying capacity of the mini-tractor together with the trailer is 1670 kg (670 kg is lifted by the tractor itself). Easy maneuverability and a fairly small turning radius (218 cm) will leave satisfied buyers.

Iseki, Bolens, Agco, Masseyferguson. Japanese-made mini tractors can work in any climate conditions and perform even heavy work (for example, transportation of building materials). They produce both tracked and wheeled vehicles, as well as with or without a cab - all at the request of the buyer.

Iseki's equipment is equipped with a power steering, four-wheel drive. In the presence of a cabin, it is practically silent inside. Maneuverability and low diesel consumption, plus the relatively low cost of the unit, please modern farmers.

Optional equipment

The installation of attachments makes it possible to appreciate all the advantages of small-scale mechanization tools, especially such productive and nimble ones as Japanese mini-tractors. The more varied and more complex the hitch, the higher the degree of versatility of the machine, manifested in the ability to perform versatile work.

The main types of hinge:

• buckets are basic with a high breakout force; planning for heavy work on construction sites; clamshells for cleaning construction and demolition waste;
• dozer blades for snow removal and those types of excavation or other work where you need to quickly clear the space;

• trenchers for digging narrow, even trenches for laying pipes, cables, drainage devices;
• scarifier for quick uprooting of stumps, extraction of stones from dense soils;

• road milling cutters, with the help of which they repair asphalt concrete pavement and carry out engineering work;
• dump trailers of various carrying capacities and universal 1- and 2-axle trailers with manual unloading, on which it is convenient to transport garden waste, turf, logs, humus;

• cultivator cutters, with the help of which they cultivate the land, prepare the soil for planting, loosen and tamp the dug in the ground;
• coons for loading and transporting bales of hay, rolls of turf / roofing material, building materials;

• stone pickers for collecting stones from burrowed fields;
• reversible plows with dredging depth controller;
• front lifters and front power take-off shafts.

Model range overview

Mitsubishi mini tractors are equipped with high-quality, economical and unpretentious diesel engines for 14 - 52 hp, capable of ensuring efficient operation with a small overall dimensions of the tractor.

Mitsubishi MT135 and MT15

Mitsubishi MT135 (14 HP), MT15 (15 HP) models differ in average diesel engine power and are designed for various agricultural and construction works.

Mitsubishi MT2001D, MTX 245, MT 265

Some models of Mitsubishi mini tractors are equipped with soil mills with electronic control of plowing parameters - modifications of Mitsubishi MT2001D, MTX 245, MT 265.

Mitsubishi MT180D

The Mitsuishi Shakti MT180D minitractor with all-wheel drive on a rigid suspension and a rear differential lock is the most popular model. Engine power of 18.5 HP, improved fuel filter, unique transmission design, high strength of components, excellent operation in intensive conditions and low weight of 125 kg - these characteristics make the mini tractor an indispensable assistant to the farmer.

Mini tractor Mitsubishi MT180-D

Available with or without a swivel blade, the cab is installed at the request of the customer. To work with attachments, a three-point hitch system and hydraulics are used, which have an outlet not to the PTO shaft, but to the power unit. This minitractor model, like the Mitsubishi Shakti VT 224-1D, is produced in India at the V.S.T. joint venture. Tillers Tractors Ltd under the Mitsubishi VST Shakti brand name.

Mini tractor Mitsubishi Shakti VT 224

Specifications

Mitsubishi MT20D, MT205 and MT265D

The Mitsubishi MT20D model has a power of 20 hp, a 3-speed PTO, a three-point hitch system, an adjustable track width (rear and front), a 4-speed gearbox.

Mini tractor Mitsubishi MT20D

Models with similar characteristics, differing in power - Mitsubishi MT 205 mini tractor (21 hp), Mitsubishi MT 265D (27 hp).

Video review Mitsubishi MT20D mini tractor

Mitsubishi МТ2201

Mitsubishi MT2201 is equipped with a 20-horsepower four-cylinder engine, consumes diesel fuel economically, provides a winter start-up mode, has good cross-country ability due to the large diameter of the wheels.

Mini tractor Mitsubishi MT2201

Selection Tips

When buying a mini-tractor, you need to take into account the land area, structure, type of soil and the planned intensity of operation. If the equipment is needed only for caring for the adjacent territory with an area of ​​up to 2 hectares, then models with a capacity of 16-20 liters will cope with this task. with. The most acceptable solution for owners of plots with an area of ​​4-5 hectares or more is machines with a capacity of 20-24 liters. with. For serious tillage and cultivation, you will already need a technique with higher productivity. It is advisable for owners of land areas from 10 hectares to acquire units with powerful 35-40 strong diesel engines.

With an increase in the productivity of mini-tractors, the possibilities of their arrangement with replaceable equipment increase, the number and complexity of which differs from model to model. There is no point in buying a lot of attachments for 16 hp machines. with. for garden maintenance and snow removal. Whereas on models with 25-horsepower diesel engines and more, you can install any attachments.

Not every landowner can afford to buy a new Japanese-made tractor. Therefore, many people purchase units on the secondary agricultural machinery market. The interest in second-hand agricultural machinery from Japan is due to the attractive combination of an impressive remaining motor resource and an acceptable price.