AEG BEWS 18-125X
This is one of the shortest AEG BEWS 18-125X cordless grinders. The model has a rather massive battery, which is mounted at an acute angle to the longitudinal axis of the unit, which is done for reasons of ergonomics of the device. This device is ideal for use in confined spaces, as it is quite compact and maneuverable. Additional advantages of the machine are a large and ergonomic anti-vibration handle, a cover that can be rearranged without additional equipment and an easily accessible release button. Each battery has a remaining charge indicator.
Grinder AEG BEWS 18-125X
Among the angle grinders on the domestic market, the AEG BEWS 18–125X model is distinguished by the ability to install the handle in three positions (which is especially convenient when grinding, although the device does not have very high performance when implementing this function), while similar machines in the line have the possibility of permutation only in two. The start button can be fixed in the on position, so the developers took care of maximum operator safety during the operation of this unit.
A possible minus, the protection of the device is triggered not only during grinding, but also during cutting, while this device cannot withstand strong pressure and overloads. The machine has an overload LED next to the power button. This can pose a problem for some operators, since it is not always in the field of view when cutting (however, the light signal on this angle grinder is quite strong). The indicator settings and operating mode are very ergonomic. As a rule, the indicator is switched on in advance, so the operator has the opportunity to react and reduce the load before the device shuts down. Accordingly, the device can operate at maximum performance. The device has a high spindle speed, so it consumes wheels faster than competing units.
Conclusion, the main characteristics of this angle grinder are low consumption of wheels at a low spindle speed, which makes the unit a good solution for performing simple and short-term works that require cutting or grinding surfaces. Model price from 18,000 rubles
Video:
Milwaukee M18 CAG125XPDB 502 X
The Milwaukee angle grinder is a professional tool with a Redlithium-Ion grade battery included in the 18-volt range. This device charges quickly enough (in 59 minutes) and allows you to use a circle with a diameter of 125 mm.
The machine has a number of ergonomic solutions. Thus, the unit is equipped with electronic overload protection, a battery charge indicator and a spindle lock button. A feature of this angle grinder is the presence of a Powerstate brushless motor and an intelligent Redlink Plus control system. The set comes with two 5.0 Ah batteries and a plastic case.
LBM Milwaukee M18 CAG125XPDB 502 X
The operation of the machine is simple and does not require effort and attention from the operator: the start key of the angle grinder is wide and long, functional and comfortable. The only drawback is that it will not be possible to lock the device in the on position, since the tool turns off as soon as the operator stops pressing the button.
The battery charge indicator has four red LEDs and indicates the occurrence of problems such as low remaining charge and overheating of the battery. The sensor is located directly on the unit body.
The brushless device delivers excellent sanding results, which is the main advantage of the Milwaukee cordless grinder.
Dust screens made of fine-mesh metal mesh on a plastic frame can reliably protect angle grinders from coarse dust. Smaller particles do not create problems during the operation of the device, but protection is also provided against them.
Special attention should be paid to the safety indicator test - the unit is reliably protected from jamming, has a spindle brake, in the event of critical situations, it is activated immediately after they appear. The security system has a complex algorithm similar to that used in angle grinders. The stopping time (performed by the spindle brake) according to the declared parameters does not exceed 2 seconds. If the circle gets jammed, the security systems are triggered immediately - within a couple of seconds without heating the battery. In addition, there is no significant load on the engine when cutting with millimeter wheels and grinding.
Pricing policy of the instrument from 20,000 rubles. for top models for more than 50,000 rubles. This will no longer be affordable for ordinary assembly teams.
Video: