How to grow bonsai trees from seeds at home?

A wonderful miniature of a garden tree in our house or greenhouse. Growing bonsai at home is easy if desired. The only thing that will be required is patience, especially when growing large quantities of bonsai.

Seeds and types of popular miniature trees

Among the bonsai species, some of them have gained particular popularity. Most often, the following species are grown from seeds:

• tropical: boxwood, acacia, wisteria, leptospermum, ficus;
• broadleaf: beeches, birches, hornbeams, elms, maples;
• conifers: cedars, spruces, pines, firs, cypresses.

In fact, the list of available woody plants is much longer. For example, seeds: spruce, euonymus, pine, beech, oak and fir can be planted at the time of harvest.

Bonsai seeds can be found on their own in parks, groves, and so on. It's much more fun than shopping at a store. But you will need special knowledge, from searching to preparing and growing seedlings.

Amateur gardener tips

An important point - in the period up to 3 months, it is necessary to carry out the formation of seedlings.

If you find seeds, but want to plant them at a different moment, then you will need to properly save the material. To do this, they must be placed in a container or, better, in a special wooden cellar. Before this, the seeds should be dried. They should be stored in a cool room at temperatures from -5 to 0 degrees Celsius.

Growing method

The seeds themselves mainly differ in weight and type of seed coat. For a certain type of seed, one or another method of sowing is suitable. Compliance with the rules will allow you to grow truly beautiful and healthy seedlings. Trees such as Japanese maple, hawthorn, juniper, hornbeam, quince require a preliminary freezing period. To do this, you need to place them in wet sand in a cool room. The rest period varies from six months to a year.

Seed pretreatment

In order for the seeds to germinate correctly, they must be processed in order to avoid disease or death. Before planting, the seeds are placed in water for a couple of days. Or also peat moss is used for germination. To accelerate the effect, you can break the hard shell of the seed. Then they are treated with Bordeaux liquid against diseases and the soil is disinfected.

Seeds for Bonsai can be ordered online

For example, for fir, heat treatment of the soil with drainage is suitable. Usually, a linen tank is taken, in which two bricks are placed with the edges down. A bucket is placed on top so that it is tightly closed with a lid. As boiling water is poured, the upper edges of the bricks should protrude three centimeters from the water.Before that, holes are made at the bottom of the bucket, and gauze is placed on top of the bottom. It is necessary to warm up the soil for about 2-3 hours.

Ready set for growing Bonsai from seeds

There are other ways to sterilize soil - freezing... This is usually done in late autumn. The soil is poured into a bag and left in the yard or on the loggia before the onset of frost. After that, the soil is brought into the room for thawing for 10 days. Before that, it is advisable to water it with melt water from fresh garden snow. Then for 6 - 7 days, the ground is again exposed to the air. In this case, the temperature should be about -20 degrees. These processes of freezing and thawing of the soil must be done 2 - 3 times for the complete destruction of harmful microorganisms and weed seeds.

Planting bonsai, soil

The seed is planted in spring, late summer or autumn. Peat pots, pre-filled with a mixture of sand and peat in equal proportions, are ideal for planting. Or they use the land for cacti and coarse sand. It is impossible to fill the soil mixture to the brim, you must leave three centimeters. Above is a centimeter layer of prepared soil. Then the whole mixture should be lightly pressed with a piece of wood, laid out the seeds and covered with a layer of sand, no more than two diameters of the planted seed. Press down again with a piece of wood and pour a little water over it.

Mini greenhouse for Bonsai from egg carriage

The container is covered with glass or plastic wrap to create a greenhouse effect. Then all the contents are exposed in a place protected from the sun with a temperature of no higher than 15 degrees. The soil should always be moderately moist, not dry out.

Seedling care

After the first shoots appear, air must be supplied into the container. For this, several holes are made in the polyethylene, or you can put a chip under the edge of the glass. As the first leaves appear, the seedlings should be fully opened.

Re-rooting is required in the interval from one to three months. This is cutting off the taproot - 2/3 of its length. Sometimes a special hormone is inoculated to stimulate root formation.

Plants need to be fertilized, it is better to do this at the beginning of summer. Fertilizers should be added to the soil in small portions. When the seedling reaches a height of 10 centimeters, it is transplanted into a flower pot. The plant must begin to accustom to sunlight. Don't forget to do periodic shaping. Depending on the type of bonsai, it is produced at the age of several years.

Using simple instructions and the tips suggested above, we can get a really beautiful and healthy tree of our dreams.

Literally translated, the word "bonsai" means grown on a tray. Basically, bonsai is an art that involves growing a miniature copy of a tree. It arose at the end of the 8th century, in China, and was the main decoration of the imperial court. Since that time, many styles have emerged that differ in the structure of the trunk and crown. Bonsai trees are outdoor trees, their size varies from two centimeters to one and a half meters. Even if you do not know how to grow bonsai at home, this art is made available thanks to the article.

Bonsai trees - types and features

Some people mistakenly believe that bonsai is some kind of culture that is dwarf in size and bizarre in shape. In fact, this is not the case. Bonsai can be grown from almost any tree. The main condition is to know which culture is suitable for creating a harmonious miniature copy.

See below for tree types and recommended sizes for bonsai formation.

1. Juniper, irga, spruce and rhododendron 8-20 cm.
2. Barberry, field and rock maple, privet, mountain pine 20-30 cm.
3. Scots pine, American maple, birch, hazel, elm 30-70 cm.
4. Linden, larch, ash, ash-leaved or plane-leaved maple, oak, beech, black pine 60-100 cm.
5. Wisteria, chestnut, black pine, sycamore, elderberry, acacia 100-130 cm.

The seeds of the tree you like can be purchased in the botanical garden, a specialty store, or collected in the city park. A good option for beginners is to buy seed in China. The seeds of trees such as spruce, pine, fir, oak or euonymus are ready for planting after harvest.

The seeds of other plants must remain dormant for some time and undergo stratification.

Seed stratification as a measure of preparation for sowing

There are seeds that are specially prepared before planting - these are sakura seeds. In fact, the Japanese cherry (sakura) is the perfect material for making bonsai. From the seeds of Japanese sakura, you can create real masterpieces that can amaze with amazing shapes. In order for the plant to germinate properly, the seeds of this tree are stratified.

Basically, stratification is a process that simulates winter conditions in order to better germinate seeds. There are several ways to stratify plants:

1. Cold stratification. Essential for seeds that need ripening: pine, thuja or blue spruce. The seeds of such plants are first soaked in lukewarm water and then placed in the refrigerator. In this way, an artificial imitation of the temperature drop in nature is made.
2. Warm stratification. Used to "awaken" seeds. The planting material is placed in warm water for several hours or days. You can also place the seeds not in liquid, but in an environment with high humidity: wrap with a damp cloth or place in a damp coconut substrate.
3. Combined stratification. It is applied to the seeds of maple, cedar, sakura, which germinate for a long time. Its essence lies in the change of cold and warm stratification. Initially, the seeds are placed in a cold room, and immediately before planting, they are soaked in warm water. Combined stratification is common in bonsai cultivation.

In addition to stratification, seeds should be disinfected so that the plants are not afraid of the appearance of fungal formations. To do this, you can use a manganese solution.

This tool perfectly disinfects seeds before planting. The seed is soaked in pinkish water. Seed disinfection lasts from 5 days to 2 weeks. After the seeds have been stratified and disinfected, they can be planted.

Soil and container for growing bonsai

The best soil for seeds is considered to be coarse sand, which is steamed before use. This is a kind of disinfection that will prevent the plant from dying. It is recommended to use a wide container with a depth of 5 cm and drainage holes. Before planting, the sand must be well moistened and special grooves must be made into which the seeds will be placed.

To grow bonsai at home, you should take care of preparing the soil and choosing the right container. The container in which the miniature tree is grown can be of different shapes and depths. Rectangle, oval, circle or polyhedron, deep or flat - the choice is really big. Remember, if the trunk of the bonsai has a slope, then the container for it should be more stable. In this case, give preference to deep containers or those made of heavy material.

The colors of the container should be calm and discreet, this will only emphasize the elegance of the plant. Moreover, the bowl should match the bonsai style. If the miniature copy will have a dense crown, then it is better to choose a flat and wide container. For a cascading style bonsai, a narrow and tall pot is suitable, and the tall crowns of the plant will better emphasize the containers that are deep, but not wide.

Scald the bowl with boiling water before planting to eliminate possible sources of fungus and bacteria.

Traditionally, bonsai is grown in a special substrate called akadama. It is a heavy soil, rich in nutrients, high moisture levels and good air circulation. However, such land is rarely used in its pure form. Firstly, it is in its pure form only in one of the prefectures of Japan, and secondly, a high concentrate of nutrients does not always have a beneficial effect on bonsai, especially during the period when the tree is being shaped.

Bonsai substrate must meet several criteria: it retains moisture well, contains nutrients and provides oxygen access to prevent souring or decay of the roots. A good substrate is mixed from granular clay, humus and sand, in the ratio that suits each type of plant.

1. Type of wood and soil used.
2. Deciduous trees. Sod land and sand, in a ratio of 7 to 3 (3 parts sand and 7 parts turf).
3. Blooming bonsai. The mixture is prepared from turf, sand and humus, in a ratio of 7: 3: 1.
   Coniferous bonsai. Four pieces of sand and 6 pieces of turf land.

You can prepare the soil yourself at home. Sod land can be dug up in a meadow. One has only to remove the top layer of vegetation, and the top 20 centimeters of soil can be used to grow bonsai.

Before use, the land must be cleaned by sifting through a large sated. The sand should be taken from the river, coarse-grained. It will make the soil looser, which will improve air circulation, and it holds moisture better. Before use, all these components should be disinfected by heating in the oven. Humus should be purchased in a specialized store or ordered via the Internet.

Features of sowing seeds and plant care

Planting is carried out in spring, summer or early autumn in peat pots, which are filled with a mixture of sand and peat, in a one-to-one ratio. If there is nowhere to buy peat, then you can buy land for cacti and mix it with coarse sand. Such a substance will be a complete replacement. Follow the steps below.

1. Pour the mixture into the pot so that there is another 3 cm to the edge.
2. Add 1 centimeter of cleaned turf soil, press down with a wooden circle.
3. Place the seeds on the prepared surface and cover them with a layer of sand. The thickness of the layer is no more than two diameters of the seeds.
4. Press down again with a wooden circle, remove it and pour the sand with water (no more than 80 ml).
5. Cover with plastic wrap.

Place the seed pot in a dark place with a temperature of no more than 150C. Remove the airing film periodically and check if the soil is dry. It should always be damp, but not wet.

When the first shoots have broken through, pierce the plastic to provide air access. After the first shoots appear, remove the film from the pots and transfer to a lighted room. Make sure that the plants are not exposed to direct sunlight. After 2-3 months, it is worth cutting off the taproot by 2/3, this process is called the formation of seedlings.

Fertilizers are added to the land where the seedlings ripen. It is necessary to transplant seedlings into a separate form after the sprout has grown by 10 centimeters. During this period, the sprout can be accustomed to the sun's rays and at the same time not stop forming the desired shape.

According to this scheme, you can grow sakura bonsai or Japanese pine.. But some types of trees need a special approach.

Features of agricultural technology of Japanese and red maple

This tree starts shedding seeds in the fall. To grow bonsai from maple seeds, they need to be stratified for 120 days. The optimal time for disembarkation is April or May. So that sprouts appear faster, the seeds are soaked for 1-2 days in hydrogen peroxide. This measure will speed up the germination process and protect the plant from diseases.

Bonsai from seeds of all types of maple, especially red, must be grown in partial shade - direct sunlight is contraindicated for it. The land for growing this species should be fertilized once a month in order to achieve the desired level of acidity. In winter, feeding is excluded.

Features of agricultural technology lemon bonsai

Growing a plant from lemon seeds is not difficult. In this case, no stratification is needed. Planting seeds are extracted directly from the fruit. It should be ripe, but not externally damaged. You can plant several seeds at once.

1. Prepare the pot and soil as described above.
2. At the bottom of the container, make 1-2 cm of drainage.
3. Fill to the top with prepared soil.
4. Place the lemon seeds 1.5 cm deep.
5. Wrap the pot with plastic wrap.

The room where the container with seeds will be stored must be at least 180C. At intervals of 2-3 days, remove the film and slightly moisten the surface with water. Do not overmoisten so that the resulting roots do not rot.

Features of agricultural technology of cedar

Cedar seeds are the easiest to grow bonsai seeds and are suitable for beginner gardeners. Seed stratification has two stages.

1. Lasts 6 days. The seeds are placed in water with a temperature of 25-300C and changed every two days.
2. The stratification period is 60 days. The seeds are taken out of the water and mixed with disinfected river sand and peat. This substance with seeds is moistened and mixed periodically until the first shoots hatch.

Once the sprouts have hatched, the seeds can be planted or placed in a container. In this form, cedar seeds can be stored in the refrigerator at a temperature of 20C until they are planted in a pot. Cedar loves a lit place, but does not tolerate direct sunlight.

The exception is young bonsai from Japanese cedar seed. It will grow better in a shaded area.

Features of agricultural technology of Japanese pine

There are 2 types of Japanese pine: black (less demanding on lighting) and common. Before planting, the seeds undergo a mandatory 3-month cold stratification. You need to plant seeds in a deep container to a depth of 2 centimeters. Sowing time is the end of winter.

The grooves are cut at a distance of 3 cm from each other to facilitate the care of germinated, but not yet ripe bonsai seedlings. When the first leaves appear, you can take the container out into a bright room. With an accelerated process of photosynthesis, the sprouts will get stronger faster. The formation of the crown can be started as soon as the plant reaches 5 cm in height.

Watering, feeding, wintering

The main problem with caring for a bonsai is watering it. Due to the small size of the pots, the roots of the tree are deformed and the efficiency from watering is reduced. There are two main methods of watering: irrigation and immersion.

1. The plant is watered from a special teapot.
2. The pot with the tree is placed in a bowl of water and taken out after a few minutes.

It is better to water it with rainwater, if it is not there, let it stand for two days with tap water.

Remember, bonsai dies without water. Even if its leaves are green, but there was no watering for a long time, the roots are most likely dead.

In the summer, watering should be done more often and more water should be poured.

Top dressing is important when growing bonsai, especially at the time of crown formation. The tree is fertilized once every 2-3 weeks, and once a month it is necessary to apply fertilizer based on algae. The most important fertilizer components are potassium, nitrogen and phosphorus.

Nitrogen is responsible for the growth and development of the leaves and stem of the tree. It is a major component in promoting cell division and protein production.

Phosphorus stimulates cell division, is responsible for budding and has a positive effect on the growth and development of the root. Protects against disease.

Potassium helps fight disease-causing microorganisms and promotes fruiting and flower development.

These substances must be present in bonsai food.In flower shops, it is difficult to find a suitable option that contains all the substances in the required proportions. Therefore, we recommend mixing fertilizers yourself in the following proportions:

• in spring, when the growth period is more intense, apply more nitrogen. The optimal ratio of nitrogen, phosphorus and potassium is 12: 6: 6, respectively;
• in summer, food should be more balanced, so the components are added in equal proportions - 10:10:10
• in autumn, less nitrogen is required, the optimal ratio of components is 3 parts of nitrogen and 9 parts of phosphorus and potassium.

If the bonsai is grown from a flowering tree, focus on adding potassium in a proportional ratio of 12: 6: 6

Indoor bonsai plants are fertilized all year round, and outdoor plants are fertilized from early spring to mid autumn. Young trees are fertilized every 2 weeks, older bonsai can be fed every 4-6 weeks. Blooming bonsai should not be fed during and immediately after flowering. When feeding, remember that it is better to apply less fertilizer than "overfeed" the plant.

At the onset of winter, inexperienced gardeners who have miniature trees on the street make a huge mistake - they bring them into a warm room. This behavior makes the tree grow constantly, it takes too much energy and depletes resources. Having deprived the plant of its natural "rest", all efforts can be wasted. A tree that grows outside must be properly prepared for wintering:

1. Clean branches from dirt and pests.
2. Move the trees to an elevated, well-lit, draft-free location in the garden.
3. At temperatures below -100C, transfer the plant to an unheated room.
4. Make sure that the soil is not too wet.

Bonsai is an amazing art and painstaking work that begins with the selection and search for seeds and never ends. Like all living things, bonsai requires care and thanks its owner for the kindness with green leaves, bizarre shapes and unique sophistication of the image.

To consolidate the material, watch a good video on growing bonsai from seeds. The author has a lot to learn!

According to legend, the Chinese emperor decided to observe his country with his own eyes, for which the craftsmen of the Celestial Empire had to create tiny copies of houses, people and, of course, trees. Bonsai, a tree in miniature, first conquered Japan almost fifteen centuries ago, and today this amazing art has conquered the whole world.

Like many centuries ago, the goal of the bonsai grower is to reproduce the creations of nature itself. Reduced copies of oaks, maples, pines, sakura or ficuses have realistic proportions, they live according to the routine established by nature. If a deciduous tree is grown in a pot, it blooms, becomes foliated and goes into winter rest.

Since the artfully shaped resemblance to a real tree is hand-formed, growing and caring for a bonsai is laborious, time-consuming, requiring knowledge, patience and understanding the needs of your green pet.

And yet, more and more newcomers are enthusiastically undertaking difficult, but very exciting work. How to grow bonsai at home and care for a small copy of a real tree?

Among the uninitiated in the intricacies of ancient agricultural technology, there is an opinion that Japanese bonsai trees are plants obtained from special seeds. This is not true. Experienced flower growers know very well that miniature spruces, pines, apple trees or wisterias appeared from ordinary seeds, and only human hands could make them slow down and change their shape.

How to grow bonsai at home: common ways

If a grower is just beginning to be interested in bonsai, the easiest way is to purchase a plant already formed, for example, from a ficus or citrus.It will help you master all the techniques of getting away from regular watering to pruning and adjusting the shape of the trunk and branches. The accumulated experience will allow you to move on to more complex tasks.

There are several ways to grow bonsai at home:

• through sowing the seeds of the culture you like and the subsequent "upbringing" of the seedling;
• using a rooted cutting;
• the formation of a seedling from a nursery or wildlife;
• transferring to a pot and correcting an already adult cultivated or wild-growing specimen.

The fastest of these methods is the formation of the crown and root system of a one- or two-year-old seedling. Such a plant already has developed roots, while its ground part gives room for imagination and can be modified according to the plans of the grower.

Enthusiasts who are interested in how to grow bonsai from seeds should know that this path is the longest, but also rewarding. Here, a person has control over the plant literally from the moment the seed spits, and it is easier to change the shape of shoots and roots because of their flexibility.

You don't have to choose an exotic tree or shrub. The main thing is that the plant has small leaves and a small annual growth, otherwise it will be much more difficult to "tame" the future bonsai tree.

Choosing the right tree for bonsai

What types of plants are suitable for bonsai, a Japanese-style tree? To get an attractive tree quickly enough, you can pay attention:

The selection of trees suitable for bonsai is incredibly large, and many of them are indigenous to Russia and are found in gardens, parks, city squares and forests. Magnificent compositions are obtained from barberry and irgi, hawthorn, acacia and birch, elder and linden, euonymus and oak.

Before growing a bonsai, based on the type of plant, determine its future height and style.

How to grow bonsai from seeds?

The seeds of trees and shrubs suitable for bonsai are divided into two types. Some of the crops are immediately ready for germination, but evolution has included a hibernation period in the “program” of many species, when the sprout waits out the cold season. At home, stratification will help simulate winter.

The seeds of trees for Japanese bonsai are placed in wet sand or sphagnum moss for 3-5 months, after which the container is placed in the refrigerator. At a slight positive temperature in a humid environment, the seed prepares for growth. When it is transferred to warmth, the sprout quickly awakens. For evergreen species and plants with seeds that have a particularly strong shell, heat or temperature contrast is used to awaken.

Sowing seeds is carried out from spring to early autumn. Seedlings obtained in the second half of summer already need illumination, which is simply irreplaceable in autumn and winter.

For germination and the first months of life of seedlings, a light sandy-peat substrate or soaked peat tablets that have gained moisture are used. Until a sprout appears on the surface, the container should be in the dark under the film. The air temperature is selected depending on the bonsai tree being grown.

To avoid the formation of condensation and rot, the greenhouse is ventilated. When seedlings appear, they provide a small access of fresh air inside and transfer the seedlings to the light. As necessary, seedlings are watered and fertilized with complex compounds. When the plant reaches a height of 10–12 cm, it is transplanted.

At this stage, the main root is shortened by a third to slow down the vertical growth of the tree. They immediately begin to form the future trunk, for which they use copper wire.

Choosing a pot and soil for bonsai

The bonsai tree is called tray-grown for a reason. To limit the growth of the pet, it is planted in a deliberately small and shallow container, simultaneously forming and cutting off part of the root system.

When choosing a pot for bonsai, it must be borne in mind that over the years the tree becomes heavy and, especially with an irregular, inclined or cascading shape, can lose stability. Therefore, for bonsai with sizes from a few centimeters to 9 meters, massive, often ceramic pots, bowls or containers of various shapes and styles are traditionally made.

There should be more than one drain hole at the bottom of the container. They are used not only for draining water, but also for fixing the plant.

To protect the plant and protect it from fungal infection of the root system, treating the bonsai pot with a hot solution of potassium permanganate or scalding with boiling water will help.

Bonsai soil is not only designed to provide the plant with nutrition and retain moisture, it should help the roots to anchor in a relatively small volume of the pot. Therefore, a special substrate is used for miniature copies of real oaks, lindens, lemons, maples and other trees.

In Japan, for many centuries, such a mixture based on certain types of clay has been called akadama. For greater nutritional value and looseness, fertile soil and sand are added to the granular substance:

1. For deciduous bonsai trees, a substrate with the inclusion of 7 parts of sod land and 3 parts of coarse washed sand is recommended.
2. Flowering crops are grown on a mixture of 7 parts of sod land, three parts of sand and 1 part of highly nutritious humus.
3. Conifers, the most popular among bonsai lovers, need particularly loose soil, for which they take 3 parts of sod soil and 2 parts of washed sand.

Before filling the pot, the bonsai soil is sorted out, removing foreign inclusions that can damage the roots, sifted and sterilized. A drainage layer is arranged at the bottom of the container to drain excess moisture.

Bonsai tree care at home

It is not enough to buy a miniature tree, get a young seedling or root a stalk of the breed you like. It is important to know how to care for a bonsai tree.

Constantly limiting growth, forming a crown and growing bonsai in a small pot, a person completely changes the life of a tree or shrub. Therefore, caring for such a crop is strikingly different from caring for other indoor plants.

The main task of the grower is to establish watering of the bonsai, which is not easy to cope with with a small volume of soil and a shallow pot filled with roots.

Previously, flower growers had only a special shape of a watering can at their disposal or the ability to immerse a bonsai pot in a bowl of water in order to wet the soil from below. Today, irrigation of plants or drip irrigation is actively used, which makes it possible to moisten the soil under the bonsai in a metered dose and without the risk of erosion.

For irrigation, take only soft, thawed or settled water. During the growing season, plants need more moisture, with the onset of autumn and the approach of the dormant period, watering is reduced and carried out less often, focusing on the state of the substrate.

Top dressing is carried out at intervals of 2-3 weeks, using their mixtures for different crops and seasons. For Japanese bonsai trees, there are algae-based mineral supplements.

Plants cannot be left without food, but it is equally important not to overfeed the bonsai. Therefore, when caring for bonsai trees at home, top dressing is applied very carefully:

• in the spring, at maximum growth intensity, include in fertilizer twice as much nitrogen as potassium and phosphorus;
• in summer, the proportions are left unchanged, but the concentration is halved;
• closer to autumn, especially for deciduous crops, the content of potassium and phosphorus is doubled, and nitrogen, on the contrary, is reduced.
• flowering and fruit-bearing trees and shrubs need more potassium to form buds and ovaries.

With the arrival of winter, nothing changes for exotic evergreens, but conifers and deciduous trees must prepare for wintering.How to care for a bonsai tree in winter? If the climate permits, they are left outside or brought onto unheated terraces. The root system in a small bonsai pot may be the first to suffer, so it is additionally covered and the soil is slightly dried. With the onset of spring, the plant wakes up and again needs watering, top dressing and the formation of a crown and roots, which is mandatory for bonsai.

How bonsai is grown - video

Bonsai Exhibition Video

Growing a bonsai tree from ordinary seeds is a laborious and time-consuming process. Nevertheless, knowing how to grow a bonsai from seeds, you can form its crown correctly, and get a beautiful green specimen that will decorate your home for a long time.

What bonsai can be grown from seeds

Germinating a tree from grains and creating Japanese bonsai in general can be done with almost any tree plant. However, there are a number of the most popular trees in this direction, and it is better to choose the one that suits you from among them.

In modern floriculture and directly for the formation of a bonsai composition, tropical specimens are often used: boxwood, myrtle, abutilones, acacia, wisteria, and also ficus. Many domestic flower growers prefer to include broad-leaved plants (beeches, maples, birches, pomegranates) in their home collection.

Do not forget about some coniferous specimens: fir, cypress, spruce, pine - all these miniature tree-like shrubs will look aesthetically pleasing and, most importantly, unusual in your home, complementing the interior.

Video "Growing Bonsai from Seed"

This video will show you how to grow bonsai from seeds at home.

Where to find and how to store seeds

Seeds for planting a bonsai tree must be selected with great care if you want your efforts not to be in vain. They do not have to be purchased at specialty gardening stores or trade fairs. One of the most common ways to obtain seed is by collecting seeds in a botanical garden or park. As a rule, it is here that the most attractive and sometimes unusual specimens grow.

Collect seeds or purchase them from trusted people - in this case, you can hope for their high germination. However, there are situations when the grower has already obtained the planting material, but cannot yet root it in the substrate. There is a solution: tree grains for Japanese bonsai composition must be properly preserved.

To do this, place them in some kind of closed container or in a wooden cellar. Do not forget to thoroughly dry the seeds before you send them to storage. Such planting material will not lose its properties if the temperature in the cellar is maintained at from -5 to 0 ° C.

Processing and germination

How to germinate the seeds of a bonsai tree needs to be figured out in detail. Don't rush to root them in purchased or hand-made substrate right away. First of all, it is recommended to carefully prepare the planting material, process it and only then germinate. You need to start such events well in advance. Try to carry out all the necessary procedures in such a way that the grains are ready for planting by early summer. During this time, the plants take root quickly. That is why your seeds will have time to germinate and grow significantly stronger.

Before planting seed, you should place it in a humid microclimate. This is necessary, since the shell of such grains is rather dense and therefore does not absorb water well. All you need to do is fill the container with the first layer of wet sand, spread the seeds on top of it, and then cover with a second layer of wet sand. Be sure to cover the pot with plastic wrap and then place it in a cool, dark place for about three months.

When you plan to plant the seeds, take them out of the shelter, then place them in warm water for 2-3 days. It is also advisable to carry out heat treatment: heat the seed in a water bath or freeze it. It is not difficult to germinate the seeds correctly, the main thing is to adhere to the key recommendations from specialists. In this case, you can count on a full-fledged result.

Selection of soil and pot

Growing a dwarf bonsai at home will certainly work if you seriously approach such a procedure as the choice of planting material, as well as the purchase of a pot and preparation of the soil composition. Ordinary peat cups are also suitable for planting grains. If you want to root them in the same container, buy a flowerpot with drainage holes. It is recommended to fill the pot with a mixture of sand and peat.

The necessary conditions

It will take a while to grow bonsai from China or Japan at home. Therefore, be patient and provide an optimal microclimate for future seedlings. It is recommended to place a pot with rooted grains in a dark area of ​​the house. It is advisable to maintain the temperature here at + 15 ° C.

As soon as grains begin to actively hatch from the seeds, be sure to slightly open the glass or make small holes in the film. Thus, the seedlings will absorb fresh air. Monitor the soil regularly (it needs to be moistened often).

Planting and caring for seedlings

How much bonsai grows from seeds is difficult to say. It will take you more than one year to form a plant and evaluate a full-fledged result. The first thing to do is to root the planting material correctly. Fill the pot with substrate. Be sure to leave an empty space 3 cm high on top of the soil layer. At this level, you will spread the seeds, then carefully press them down with a piece of wood. After that, it is recommended to sprinkle them with a layer of earth again and tamp the substrate.

Full care of seedlings includes not only regular moistening of the soil composition or airing, but also the formation process. When the seedlings are about 1-3 months old, it is recommended to dive the tops. This will stimulate green specimens to grow further.

Tips and next steps

No matter how many bonsai trees are planted from seeds, the lack of full care for seedlings will be disastrous. That is why it is imperative to control the intensity of its growth. Do not forget to feed the bonsai during the summer. When the miniature tree reaches a height of about 10 cm, transplant it into another container.